Tracking Change in Northern Ireland Policing: Temporal Phases and Key Themes

Purpose
– The purpose of this paper is to explore and explain the change process in Northern Ireland policing through an analysis of temporally bracketed change phases and key change delivery themes ranging from 1996 to 2012.

Design/methodology/approach
– The research approach adopted is process based, longitudinal and multi-method, utilising “temporal bracketing” to determine phases of change and conjunctural reasoning to unravel the systematic factors interacting over time, within the case.

Findings
– The paper identifies and temporally brackets four phases of change: “Tipping point”; “Implementation, Symbolic Modification and Resistance”; “Power Assisted Steering”; and “A Return to Turbulence”, identifies four themes that emerge from RUC-PSNI experience: the role of adaptive leadership; pace and sequencing of change implementation; sufficient resourcing; and the impact of external agents acting as boundary spanners, and comments on the prominence of these themes through the phases. The paper goes on to reflect upon how these phases and themes inform our understanding of organisational change within policing organisations generally and within politically pressurised transition processes.

Originality/value
– The contribution of the paper lies in the documentation of an almost unique organisational case in an environmentally forced change process. In this it contains lessons for other organisations facing similar, if less extreme challenges and presents an example of intense change analysed longitudinally.

Supervised walking in comparison with fitness training for chronic back pain in physiotherapy: results of the SWIFT single-blinded randomized controlled trial (ISRCTN17592092)

Effectiveness of brief/minimal contact self-activation interventions that encourage participation in physical activity (PA) for chronic low back pain (CLBP >12 weeks) is unproven. The primary objective of this assessor-blinded randomized controlled trial was to investigate the difference between an individualized walking programme (WP), group exercise class (EC), and usual physiotherapy (UP, control) in mean change in functional disability at 6 months. A sample of 246 participants with CLBP aged 18 to 65 years (79 men and 167 women; mean age ± SD: 45.4 ± 11.4 years) were recruited from 5 outpatient physiotherapy departments in Dublin, Ireland. Consenting participants completed self-report measures of functional disability, pain, quality of life, psychosocial beliefs, and PA were randomly allocated to the WP (n = 82), EC (n = 83), or UP (n = 81) and followed up at 3 (81%; n = 200), 6 (80.1%; n = 197), and 12 months (76.4%; n = 188). Cost diaries were completed at all follow-ups. An intention-to-treat analysis using a mixed between-within repeated-measures analysis of covariance found significant improvements over time on the Oswestry Disability Index (Primary Outcome), the Numerical Rating Scale, Fear Avoidance-PA scale, and the EuroQol EQ-5D-3L Weighted Health Index (P < 0.05), but no significant between-group differences and small between-group effect sizes (WP: mean difference at 6 months, 6.89 Oswestry Disability Index points, 95% confidence interval [CI] -3.64 to -10.15; EC: -5.91, CI: -2.68 to -9.15; UP: -5.09, CI: -1.93 to -8.24). The WP had the lowest mean costs and the highest level of adherence. Supervised walking provides an effective alternative to current forms of CLBP management.

Tracking smart grid hackers

The next-generation smart grid will rely highly on telecommunications infrastructure for data transfer between various systems. Anywhere we have data transfer in a system is a potential security threat. When we consider the possibility of smart grid data being at the heart of our critical systems infrastructure it is imperative that we do all we can to ensure the confidentiality, availability and integrity of the data. A discussion on security itself is outside the scope of this paper, but if we assume the network to be as secure as possible we must consider what we can do to detect when that security fails, or when the attacks comes from the inside of the network. One way to do this is to setup a hacker-trap, or honeypot. A honeypot is a device or service on a network which appears legitimate, but is in-fact a trap setup to catch breech attempts. This paper identifies the different types of honeypot and describes where each may be used. The authors have setup a test honeypot system which has been live for some time. The test system has been setup to emulate a device on a utility network. The system has had many hits, which are described in detail by the authors. Finally, the authors discuss how larger-scale systems in utilities may benefit from honeypot placement.

Visual attention to food cues in obesity: An eye‐tracking study.

Objective
Based on the theory of incentive sensitization, the aim of this study was to investigate differences in attentional processing of food-related visual cues between normal-weight and overweight/obese males and females.

Methods
Twenty-six normal-weight (14M, 12F) and 26 overweight/obese (14M, 12F) adults completed a visual probe task and an eye-tracking paradigm. Reaction times and eye movements to food and control images were collected during both a fasted and fed condition in a counterbalanced design.

Results
Participants had greater visual attention towards high-energy-density food images compared to low-energy-density food images regardless of hunger condition. This was most pronounced in overweight/obese males who had significantly greater maintained attention towards high-energy-density food images when compared with their normal-weight counterparts however no between weight group differences were observed for female participants.

Conclusions
High-energy-density food images appear to capture visual attention more readily than low-energy-density food images. Results also suggest the possibility of an altered visual food cue-associated reward system in overweight/obese males. Attentional processing of food cues may play a role in eating behaviors thus should be taken into consideration as part of an integrated approach to curbing obesity.

Laboratizing the border: The production, translation and anticipation of security technologies

This paper critically interrogates how borders are produced by scientists, engineers and security experts in advance of the actual deployment of technical devices they develop. This paper explores the prior stages of translation and decision-making as a socio-technical device is conceived and developed. Drawing on in-depth interviews, observations and ethnographic research of the EU-funded Handhold project (consisting of nine teams in five countries), it explores how assumptions about the way security technologies will and should perform at the border shape the way that scientists, engineers, and security experts develop a portable, integrated device to detect CBRNE threats at borders. In disaggregating the moments of sovereign decision making across multiple sites and times, this paper questions the supposed linearity of how science comes out of and feeds back into the world of border security. An interrogation of competing assumptions and understandings of security threats and needs, of competing logics of innovation and pragmatism, of the demands of differentiated temporalities in detection and interrogation, and of the presumed capacities, behaviours, and needs of phantasmic competitors and end-users reveals a complex, circulating and co-constitutive process of device development that laboratises the border itself. We trace how sovereign decisions are enacted as assemblages in the antecedent register of device development itself through the everyday decisions of researchers in the laboratory, and the material components of the Handhold device itself.

Modulation Insensitive PLL for Tracking Antenna Applications

This article shows practical results of a self-tracking receiving antenna array using a new phase locked loop (PLL) tracking configuration. The PLL configuration differs from other architectures, as it has the new feature of being able to directly track phase modulated signals without requiring an additional unmodulated pilot carrier to be present. The PLLs are used within the antenna array to produce a constant phase intermediate frequency (IF) for each antenna element. These IF's can then be combined in phase, regardless of the angle of arrival of the signal, thus utilizing the antennas array factor. The article's main focus is on the phase jitter performance of the modulation insensitive PLL carrier recovery when tracking phase modulated signals of low signal to noise ratio. From this analysis, it is concluded that the new architecture, when optimally designed, can produce phase jitter performance close to that of a conventional tracking PLL.

Enhancing Linear Programming with Motion Modeling for Multi-target Tracking

In this paper we extend the minimum-cost network flow approach to multi-target tracking, by incorporating a motion model, allowing the tracker to better cope with longterm occlusions and missed detections. In our new method, the tracking problem is solved iteratively: Firstly, an initial tracking solution is found without the help of motion information. Given this initial set of tracklets, the motion at each detection is estimated, and used to refine the tracking solution.
Finally, special edges are added to the tracking graph, allowing a further revised tracking solution to be found, where distant tracklets may be linked based on motion similarity. Our system has been tested on the PETS S2.L1 and Oxford town-center sequences, outperforming the baseline system, and achieving results comparable with the current state of the art.

Environmental forensic investigations: The potential use of a novel heavy metal sensor and novel taggants

This chapter presents a novel hand-held instrument capable of real-time in situ detection and identification of heavy metals, along with the potential use of novel taggants in environmental forensic investigations. The proposed system provides the facilities found in a traditional laboratory-based instrument but in a hand held design, without the need for an associated computer. The electrochemical instrument uses anodic stripping voltammetry, which is a precise and sensitive analytical method with excellent limits of detection. The sensors comprise a small disposable plastic strip of screen-printed electrodes rather than the more common glassy carbon disc and gold electrodes. The system is designed for use by a surveyor on site, allowing them to locate hotspots, thus avoiding the expense and time delay of prior laboratory analysis. This is particularly important in environmental forensic analysis when a site may have been released back to the owner and samples could be compromised on return visits. The system can be used in a variety of situations in environmental assessments, the data acquired from which provide a metals fingerprint suitable for input to a database. The proposed novel taggant tracers, based on narrow-band atomic fluorescence, are under development for potential deployment as forensic environmental tracers. The use of discrete fluorescent species in an environmentally stable host has been investigated to replace existing toxic, broadband molecular dye tracers. The narrow band emission signals offer the potential for tracing a large number of signals in the same environment. This will give increased data accuracy and allow multiple source environmental monitoring of environmental parameters.

A review of behaviour change theories and techniques used in group based self-management programmes for chronic low back pain and arthritis

Background: Medical Research Council (MRC) guidelines recommend applying theory within complex interventions to explain how behaviour change occurs. Guidelines endorse self-management of chronic low back pain (CLBP) and osteoarthritis (OA), but evidence for its effectiveness is weak. Objective: This literature review aimed to determine the use of behaviour change theory and techniques within randomised controlled trials of group-based self-management programmes for chronic musculoskeletal pain, specifically CLBP and OA. Methods: A two-phase search strategy of electronic databases was used to identify systematic reviews and studies relevant to this area. Articles were coded for their use of behaviour change theory, and the number of behaviour change techniques (BCTs) was identified using a 93-item taxonomy, Taxonomy (v1). Results: 25 articles of 22 studies met the inclusion criteria, of which only three reported having based their intervention on theory, and all used Social Cognitive Theory. A total of 33 BCTs were coded across all articles with the most commonly identified techniques being '. instruction on how to perform the behaviour', '. demonstration of the behaviour', '. behavioural practice', '. credible source', '. graded tasks' and '. body changes'. Conclusion: Results demonstrate that theoretically driven research within group based self-management programmes for chronic musculoskeletal pain is lacking, or is poorly reported. Future research that follows recommended guidelines regarding the use of theory in study design and reporting is warranted.

The Impact of EU Privacy Legislation on Biometric System Deployment: Protecting citizens but constraining applications

Biometric systems provide a valuable service in helping to identify individuals from their stored personal details. Unfortunately, with the rapidly increasing use of such systems, there is a growing concern about the possible misuse of that information. To counteract the threat, the European Union (EU) has introduced comprehensive legislation that seeks to regulate data collection and help strengthen an individual’s right to privacy. This article looks at the implications of the legislation for biometric system deployment. After an initial consideration of current privacy concerns, it examines what is meant by ‘personal data’ and its protection, in legislation terms. Also covered are issues around the storage of biometric data, including its accuracy, its security, and justification for what is collected. Finally, the privacy issues are illustrated through three biometric use cases: border security, online bank access control and customer profiling in stores.

Developing management capability within a horizontal supply chain in performance measurement deployment and evolution: A Dynamic Capabilities and Goal Theory perspective

Complex collaboration in rapidly changing business environments create challenges for management capability in Utility Horizontal Supply Chains (UHSCs) involving the deploying and evolving of performance measures. The aim of the study is twofold. First, there is a need to explore how management capability can be developed and used to deploy and evolve Performance Measurement (PM), both across a UHSC and within its constituent organisations, drawing upon a theoretical nexus of Dynamic Capability (DC) theory and complementary Goal Theory. Second, to make a contribution to knowledge by empirically building theory using these constructs to show the management motivations and behaviours within PM-based DCs. The methodology uses an interpretive theory building, multiple case based approach (n=3) as part of a USHC. The data collection methods include, interviews (n=54), focus groups (n=10), document analysis and participant observation (reflective learning logs) over a five-year period giving longitudinal data. The empirical findings lead to the development of a conceptual framework showing that management capabilities in driving PM deployment and evolution can be represented as multilevel renewal and incremental Dynamic Capabilities, which can be further understood in terms of motivation and behaviour by Goal-Theoretic constructs. In addition three interrelated cross cutting themes of management capabilities in consensus building, goal setting and resource change were identified. These management capabilities require carefully planned development and nurturing within the UHSC. 

A pilot randomised controlled trial (RCT) investigating the effectiveness of reflexology for managing pregnancy low back and/or pelvic pain.

any pregnant women with low back and/or pelvic pain (LBPP) use pain medications to manage this pain, much of which is self-prescribed and potentially harmful. Therefore, there is a need to find effective nonpharmacological treatments for the condition. Reflexology has previously been shown to help nonspecific low back pain. Therefore; a pilot RCT was conducted investigating reflexology in the management of pregnancy-LBPP. 90 primiparous women were randomised to either usual care, a reflexology or footbath intervention. Primary outcome measures were; the Pain Visual Analogue Scale (VAS). 64 women completed the RCT; retention rates for the reflexology group were 80%, usual care group 83.33% and footbath group 50%. The reflexology group demonstrated a Clinically Important Change (CIC) in pain frequency (1.64 cm). Results indicate it is feasible to conduct an RCT in this area, although a footbath is an unsuitable sham treatment. Reflexology may help manage pregnancy-LBPP; however a fully powered trial is needed to confirm this.