In-situ white beam microdiffraction study of the deformation behavior in polycrystalline magnesium alloy during uniaxial loading

Scanning white beam X-ray microdiffraction has been used to study the heterogeneous grain deformation in a polycrystalline Mg alloy (MgAZ31). The high spatial resolution achieved on beamline 7.3.3 at the Advanced Light Source provides a unique method to measure the elastic strain and orientation of single grains as a function of applied load. To carry out in-situ measurements a light weight (~0.5kg) tensile stage, capable of providing uniaxial loads of up to 600kg, was designed to collect diffraction data on the loading and unloading cycle. In-situ observation of the deformation process provides insight about the crystallographic deformation mode via twinning and dislocation slip.

Asymmetric rolling of interstitial-free steel using differential roll diameters. Part I : mechanical properties and deformation textures

IF steel sheets were processed by conventional symmetric and asymmetric rolling (ASR) at ambient temperature. The asymmetry was introduced in a geometric way using differential roll diameters with a number of different ratios. The material strength was measured by tensile testing and the microstructure was analyzed by optical and transmission electron microscopy as well as electron backscatter diffraction (EBSD) analysis. Texture was also successfully measured by EBSD using large surface areas. Finite element (FE) simulations were carried out for multiple passes to obtain the strain distribution after rolling. From the FE results, the velocity gradient along selected flow lines was extracted and the evolution of the texture was simulated using polycrystal plasticity modeling. The best mechanical properties were obtained after ASR using a roll diameter ratio of 2. The textures appeared to be tilted up to 12 deg around the transverse direction, which were simulated with the FE-combined polycrystal plasticity modeling in good agreement with measurements. The simulation work revealed that the shear component introduced by ASR was about the same magnitude as the normal component of the rolling strain tensor.

Salt loading in canola oil fed SHRSP rats induces endothelial dysfunction

This study aimed to determine if 50 days of canola oil intake in the absence or presence of salt loading affects: (1) antioxidant and oxidative stress markers, (2) aortic mRNA of NADPH oxidase (NOX) subunits and superoxide dismutase (SOD) isoforms and (3) endothelial function in SHRSP rats. SHRSP rats were fed a diet containing 10 wt/wt% soybean oil or 10 wt/wt% canola oil, and given tap water or water containing 1% NaCl for 50 days. Without salt, canola oil significantly increased RBC SOD, plasma cholesterol and triglycerides, aortic p22phox, NOX2 and CuZn-SOD mRNA, and decreased RBC glutathione peroxidase activity. With salt, canola oil reduced RBC SOD and catalase activity, LDL-C, and p22phox mRNA compared with canola oil alone, whereas plasma malondialdehyde (MDA) was reduced and RBC MDA and LDL-C were higher. With salt, the canola oil group had significantly reduced endothelium-dependent vasodilating responses to ACh and contractile responses to norepinephrine compared with the canola oil group without salt and to the WKY rats. These results indicate that ingestion of canola oil increases O2 - generation, and that canola oil ingestion in combination with salt leads to endothelial dysfunction in the SHRSP model.

Synergistic effects within a C2-symmetric organocatalyst : the potential formation of a chiral catalytic pocket

This study describes the synthesis of five novel C2-symmetric organocatalysts that facilitate the on-water asymmetric aldol reaction at low catalyst loading (1 mol%) without the use of additives. Each catalyst is composed of two diprolinamide units joined by a symmetric alkyl bridging group allowing for systematic modulation of catalytic site proximity. Typically, catalysts in this manuscript which bear the catalytic units in close proximity gave the best reaction outcomes in terms of conversion (up to >99%), diastereomeric ratio (4/96, syn/anti) and enantiomeric excess (up to 97%). This effect has been attributed to the assembly of a chiral pocket, facilitated by hydrogen bonding at the oil-in-water interface.

Asymmetric Nash bargaining solutions: a simple Nash program

This article proposes a simple Nash program. Both our axiomatic characterization and our noncooperative procedure consider each distinct asymmetric and symmetric Nash solution. Our noncooperative procedure is a generalization of the simplest known sequential Nash demand game analyzed by Rubinstein etal. (1992). We then provide the simplest known axiomatic characterization of the class of asymmetric Nash solutions, in which we use only Nash's crucial Independence of Irrelevant Alternatives axiom and an asymmetric modification of the well-known Midpoint Domination axiom.

Asymmetric rolling of interstitial-free steel using differential roll diameters. Part II : microstructure and annealing effects

The effects of annealing on the microstructure, texture, tensile properties, and R value evolution of an IF steel sheet after room-temperature symmetric and asymmetric rolling were examined. Simulations were carried out to obtain R values from the experimental textures using the viscoplastic self-consistent polycrystal plasticity model. The investigation revealed the variations in the textures due to annealing and symmetric/asymmetric rolling and showed that the R values correlate strongly with the evolution of the texture. An optimum heat treatment for the balance of strength, ductility, and deep drawability was found to be at 873 K (600 _C) for 30 minutes.

Common variants of the resistance mechanism in the Smith Machine: analysis of mechanical loading characteristics and application to strength-oriented and hypertrophy-oriented training

The Smith machine is a pervasive weight-training apparatus, used extensively by a wide population of weight trainers, from novices to high-level athletes. The advantages of using a Smith machine over free-weight resistance are disputed, with conflicting findings reported in the literature. In this study, we are interested in practical differences between 3 types of loading mechanisms found in modern Smith machines. In addition to the basic design comprising a constrained weighted barbell, alterations with a counterweight and a viscous resistance component are examined. The approach taken is that of employing a recently proposed representation of force characteristics that may be exhibited by a trainee and a predictive model of thus effected adaptation. A computer simulation is used to predict the effects of the 3 linear Smith machine designs in the framework of different exercise protocols. Our results demonstrate that each resistance component, vertically constrained load, counterweight, and viscous, can be matched with a particular training context, in which it should be preferred. Thus, a number of practical guidelines for weight-training practitioners are recommended. In summary, (a) at low intensities (55–75% of 1 repetition maximum [1RM]) used in strength-endurance training, a viscous resistance containing the Smith machine was found to offer advantages over both a constrained load only and counterweighted designs; (b) at medium intensities (75–85% of 1RM) typically employed in hypertrophy-specific training, the counterweighted Smith machine design was found to offer the best choice in terms of high-force development and total external work performed; finally, (c) at high training intensity (90–100% of 1RM), the optimal prescription was found to be more dependent on the specific athlete’s weaknesses, highlighting the need for continual monitoring of the athlete’s force production capabilities. To ensure that appropriate adjustments are made to the athlete’s training regimen, the practitioner should consider the full set of findings of this article and the accompanying discussion.