Influences of Structural Damping and Buoyancy-Weight Ratio on Dynamic Responses of Submerged Floating Tunnel

The recent progress of submerged floating tunnel (SFT) investigation and SFT prototype (SFTP) project in Qiandao Lake (Zhejiang Province, P.R. China) is the background of this research. Structural damping effect is brought into present computation model in terms of Rayleigh damping. Based on the FEM computational results of SFTPs as a function of buoyancy-weight ratio (BWR) under hydrodynamic loads, the effect of BWR on the dynamic response of SFT is illustrated. In addition, human comfort index is adopted to discuss the comfort status of the SFTP.

Researches on essential mechanics issues for submerged floating tunnel

Since 2001, a research group in the Institute of Mechanics, Chinese Academy of Sciences, has been devoted to the research of essential mechanics issues for submerged floating tunnel (SFT). In addition to the structural design of the SFT prototype in Qiandao Lake, the relevant researches cover a number of topics. This paper briefly describes the research procedure and results, including dynamic response of SFT due to surface wave, vortex-induced vibration of anchoring system, structural analysis of curved SFT, temperature effects of curved SFT, structural dynamic response due to accidental load, and effects of structural parameters (buoyancy-weight ratio, tunnel length，tether stiffness，etc.) on dynamic response.

The influence of some environmental variables on the apparent abundance of skipjack tuna, Katsuwonus pelamis, in the Eastern Pacific Ocean

ENGLISH: The abundance of skipjack larvae in the central and western Pacific approximately doubled for every 1°C increase in sea-surface temperature (SST) from 23°C to a maximum of about 29°C, and then usually decreased with further increases in SST. Skipjack larvae are scarce in the eastern Pacific Ocean (EPO), so most skipjack recruits and adults in this area are believed to have originated in the central and, possibly, the western Pacific. The catch per unit of effort (CPUE), in short tons per day's fishing, and the catch rate, in number of fish per day's fishing, are estimates of apparent abundance in a fishery. The logarithm of the annual CPUE for skipjack for international baitboats in the EPO for the 1934-1960 period was positively correlated with SST in the spawning area in the central Pacific 18 months earlier (r2 0.31), during the July-June period when most of the recruits in each cohort were presumed to have been spawned. Adequate data for other environmental variables were not available for testing with the baitboat data. The other environmental variables available and selected for testing for correlation with estimates of skipjack abundance for purse seiners for the 1961-1984 period and the reasons for their selection are as follows. 1)Wind-mixing index (WMI). The degree of mixing in the upper layers of the ocean is proportional to the cube of the wind speed, called WMI. The degree of mixing in the spawning areas of the central and the western Pacific may affect the concentration of organisms that skipjack larvae feed upon, thereby influencing their survival, and ultimately determining cohort strength and the number of recruits to the eastern Pacific fishery. 2) SST in the fishing areas at the time of fishing (SST). The CPUE for yellowfin tuna has been shown to be inversely related to SST in the fishing areas, and there are indications that skipjack CPUE is lower during EI Nino events when SST is higher than normal. 3) North-south SST gradient across the thermal front off the Gulf of Guayaquil. This is a measure of the degree of upwelling and nutrient enrichment of the upper waters south of the front and ultimately of the production of food for tunas. 4) Speed of the North Equatorial Countercurrent (NECC). Young skipjack may migrate from the central Pacific to the EPO in the eastward flowing NECC; if so, the number of recruits might be affected by variations in the speed of the current. The logarithm of the annual catch rate of skipjack recruits by international purse seiners in the EPO for the 1961-1984 period was positively correlated with SST in the spawning area of the central Pacific 18 months earlier (r2 = 0.21),and inversely correlated with WMI in the spawning area 18 months earlier (r2 0.46). The logarithm of CPUE for purse seiners in the area off the Gulf of Guayaquil was not correlated with SST in the spawning area 18 months earlier, but was inversely correlated with WMI in the spawning area 18 months earlier (r2 = 0.19), and inversely correlated with the north-south SST gradient in the fishing area at the time of fishing (r2 0.32). Neither of these estimates of apparent abundance from purse seiners were correlated with SST in the fishing areas, or with the speed of the NECC at earlier times. SPANISH: La abundancia de larvas de barrilete en el Pacífico central y occidental se multiplicó por dos, aproximadamente, por cada aumento de 1°Cen la temperatura de la superficie del mar (TSM) entre 23°C y un máximo de unos 29°C, y luego generalmente disminuyó con más aumentos en la TSM. Las larvas de barrilete son escasas en el Océano Pacífico oriental (OPO), y por lo tanto se cree que la mayoría de los reclutas y adultos en esta zona surgieron del Pacífico central, y posiblemente también del Pacífico occidental. La captura por unidad de esfuerzo (CPUE), en toneladas cortas por día de pesca, y la tasa de captura, en número de peces por día de pesca, son estimaciones de la abundancia aparente en una pesquería. El logaritmo de la CPUE anual de barrilete lograda por barcos de carnada en el OPO en el período 1934-1960 se correlacionó positivamente con la TSM en la zona de desove en el Pacífico central de 18 meses antes (r2 = 0.31), durante el período de junio-julio en el cual se cree que nació la mayoría de los reclutas en cada cohorte. No se dispuso de datos suficientes sobre otras variables ambientales para comprobarlos con los datos de los barcos de carnada. Las demás variables ambientales disponibles y seleccionadas para someterlas a pruebas de correlación con las estimaciones de la abundancia del barrilete de barcos cerqueros en el período 1961-1984, y las razones por su selección, son las siguientes: 1) Indice de mezcla por el viento (IMV). El grado de mezcla en las capas superiores del océano es proporcional al cubo de la velocidad del viento, llamado IMV. Es posible que el grado de mezcla en las zonas de desove del Pacífico central y occidental afecte la concentración de los organismos que alimentan a las larvas del barrilete, afectando así la supervivencia de éstas, y finalmente determinando el tamaño de las cohortes y el número de reclutas a la pesquería del OPO. 2) TSM en la zona de pesca al realizarse la pesca (TSM). Se ha mostrado que la relación de la CPUE del atún aleta amarilla a la TSM en la zona de pesca es inversa, y existen indicaciones que la CPUE de barrilete es inferior durante eventos del Niño, cuando las TSM son superiores a lo normal. 3) Gradiente norte-sur de las TSM a través del frente térmico frente al Golfo de Guayaquil. Esto es una medida del grado de afloramiento y enriquecimiento nutritivo del nivel superior de las aguas al sur de dicho frente, y finalmente de la producción de alimento para los atunes. 4) La velocidad de la Contracorriente Ecuatorial del Norte (CCEN). Es posible que los bariletes juveniles migren del Pacífico central al Pacífico oriental en la CCEN, que fluye hacia el este; de ser así, es posible que la cantidad de reclutas se vea afectada por variaciones en la velocidad de la corriente. El logaritmo de la tasa anual de captura de reclutas de barrilete por cerqueros de varias banderas en el OPO en el período 1961-1964 estuvo correlacionado de forma positiva con las TSM en la zona de desove del Pacífico central de 18meses antes (r2 0.21),y de forma inversa con el IMV de la zona de desove de 18 meses antes (r2 0.46). El logaritmo de la CPUE de los cerqueros en la zona frente al Golfo de Guayaquil no estuvo correlacionado con las TSM en la zona de desove de 18 meses antes, pero sí estuvo correlacionado de forma inversa con el IMV en la zona de desove de 18 meses antes (r2 0.19),y con el gradiente norte-sur de las TSM en la zona de pesca al realizarse la pesca (r2 0.32). Ninguna de estas estimaciones de abundancia aparente provenientes de barcos cerqueros estuvo correlacionada con las TSM en las zonas de pesca o con la velocidad de la CCEN en épocas anteriores. (PDF contains 140 pages.)

Testing the performance and feasibility of Bluetooth communications in pervasive systems

Smart and mobile environments require seamless connections. However, due to the frequent process of ''discovery'' and disconnection of mobile devices while data interchange is happening, wireless connections are often interrupted. To minimize this drawback, a protocol that enables an easy and fast synchronization is crucial. Bearing this in mind, Bluetooth technology appears to be a suitable solution to carry on such connections due to the discovery and pairing capabilities it provides. Nonetheless, the time and energy spent when several devices are being discovered and used at the same time still needs to be managed properly. It is essential that this process of discovery takes as little time and energy as possible. In addition to this, it is believed that the performance of the communications is not constant when the transmission speeds and throughput increase, but this has not been proved formally. Therefore, the purpose of this project is twofold: Firstly, to design and build a framework-system capable of performing controlled Bluetooth device discovery, pairing and communications. Secondly, to analyze and test the scalability and performance of the \emph{classic} Bluetooth standard under different scenarios and with various sensors and devices using the framework developed. To achieve the first goal, a generic Bluetooth platform will be used to control the test conditions and to form a ubiquitous wireless system connected to an Android Smartphone. For the latter goal, various stress-tests will be carried on to measure the consumption rate of battery life as well as the quality of the communications between the devices involved.

A small arc-heated plasma testing facility for thermal protection materials

Experimental research on a 150 kW arc-heated plasma testing facility was conducted. Stable plasma jets with different gas compositions, temperatures and velocities were obtained at chamber pressure between 400 Pa – 100 kPa. Stagnation ablation experiments were conducted on samples of typical super alloys used for thermal protection systems. The microstructure and hardness of alloys before and after ablation were compared.