Thermal modelling of semiconductor switches in three-level Neutral Point Clamped Medium Voltage DTC-inverter

The aim of this thesis is to investigate the thermal loading of medium voltage three-level NPC inverter’s semiconductor IGCT switches in different operation points. The objective is to reach both a fairly accurate off-line simulation program and also so simple a simulation model that its implementation into an embedded system could be reasonable in practice and a real time use should become feasible. Active loading limitation of the inverter can be realized with a thermal model which is practical in a real time use. Determining of the component heating has been divided into two parts; defining of component losses and establishing the structure of a thermal network. Basics of both parts are clarified. The simulation environment is Matlab-Simulink. Two different models are constructed – a more accurate one and a simplified one. Potential simplifications are clarified with the help of the first one. Simplifications are included in the latter model and the functionalities of both models are compared. When increasing the calculation time step a decreased number of considered components and time constants of the thermal network can be used in the simplified model. Heating of a switching component is dependent on its topological position and inverter’s operation point. The output frequency of the converter defines mainly which one of the switching components is – because of its losses and heating – the performance limiting component of the converter. Comparison of results given by different thermal models demonstrates that with larger time steps, describing of fast occurring switching losses becomes difficult. Generally articles and papers dealing with this subject are written for two-level inverters. Also inverters which apply direct torque control (DTC) are investigated rarely from the heating point of view. Hence, this thesis completes the former material.

Three new pathogens infecting antilles cherry in the State of Pará

When grown in monoculture, Antilles cherry (Malpighia glabra) plants have been affected by diseases which cause fruits malformation and spotting, reducing their value for market. From 1999 on, three new diseases characterised by leaf spot and fall of leaves have been observed in plantations located in Santa Izabel do Pará and Igarapé Açu counties. After isolation and pathogenicity tests on leaves of Antilles cherry plants, the isolates were identified as Calonectria ilicicola (anamorph: Cylindrocladium parasiticum) which causes large leaf spots reaching up to 7 cm long, brownish in colour, coalescent, scorching large leaf areas and causing 50% of leaf fall; Corynespora cassiicola, which provokes irregularly shaped, necrotic leaf spots with dark brown margins and white centers, surrounded by a yellow halo; and Myrothecium roridum which causes greyish target spots. Corynespora cassiicola has been reported causing leaf spots on different hosts in the Amazon region, while C. cassiicola has been recorded infecting Antilles cherry besides other hosts in the States of Maranhão and Pará.

Parallel-Operating Three-Phase Voltage Source Inverters – Circulating CurrentModeling, Analysis and Mitigation

The maximum realizable power throughput of power electronic converters may be limited or constrained by technical or economical considerations. One solution to this problemis to connect several power converter units in parallel. The parallel connection can be used to increase the current carrying capacity of the overall system beyond the ratings of individual power converter units. Thus, it is possible to use several lower-power converter units, produced in large quantities, as building blocks to construct high-power converters in a modular manner. High-power converters realized by using parallel connection are needed for example in multimegawatt wind power generation systems. Parallel connection of power converter units is also required in emerging applications such as photovoltaic and fuel cell power conversion. The parallel operation of power converter units is not, however, problem free. This is because parallel-operating units are subject to overcurrent stresses, which are caused by unequal load current sharing or currents that flow between the units. Commonly, the term ’circulatingcurrent’ is used to describe both the unequal load current sharing and the currents flowing between the units. Circulating currents, again, are caused by component tolerances and asynchronous operation of the parallel units. Parallel-operating units are also subject to stresses caused by unequal thermal stress distribution. Both of these problemscan, nevertheless, be handled with a proper circulating current control. To design an effective circulating current control system, we need information about circulating current dynamics. The dynamics of the circulating currents can be investigated by developing appropriate mathematical models. In this dissertation, circulating current models aredeveloped for two different types of parallel two-level three-phase inverter configurations. Themodels, which are developed for an arbitrary number of parallel units, provide a framework for analyzing circulating current generation mechanisms and developing circulating current control systems. In addition to developing circulating current models, modulation of parallel inverters is considered. It is illustrated that depending on the parallel inverter configuration and the modulation method applied, common-mode circulating currents may be excited as a consequence of the differential-mode circulating current control. To prevent the common-mode circulating currents that are caused by the modulation, a dual modulator method is introduced. The dual modulator basically consists of two independently operating modulators, the outputs of which eventually constitute the switching commands of the inverter. The two independently operating modulators are referred to as primary and secondary modulators. In its intended usage, the same voltage vector is fed to the primary modulators of each parallel unit, and the inputs of the secondary modulators are obtained from the circulating current controllers. To ensure that voltage commands obtained from the circulating current controllers are realizable, it must be guaranteed that the inverter is not driven into saturation by the primary modulator. The inverter saturation can be prevented by limiting the inputs of the primary and secondary modulators. Because of this, also a limitation algorithm is proposed. The operation of both the proposed dual modulator and the limitation algorithm is verified experimentally.

CFD Simulation of Two-phase and Three-phase Flows in Internal-loop Airlift

Airlift reactors are pneumatically agitated reactors that have been widely used in chemical, petrochemical, and bioprocess industries, such as fermentation and wastewater treatment. Computational Fluid Dynamics (CFD) has become more popular approach for design, scale-up and performance evaluation of such reactors. In the present work numerical simulations for internal-loop airlift reactors were performed using the transient Eulerian model with CFD package, ANSYS Fluent 12.1. The turbulence in the liquid phase is described using κ- ε the model. Global hydrodynamic parameters like gas holdup, gas velocity and liquid velocity have been investigated for a range of superficial gas velocities, both with 2D and 3D simulations. Moreover, the study of geometry and scale influence on the reactor have been considered. The results suggest that both, geometry and scale have significant effects on the hydrodynamic parameters, which may have substantial effects on the reactor performance. Grid refinement and time-step size effect have been discussed. Numerical calculations with gas-liquid-solid three-phase flow system have been carried out to investigate the effect of solid loading, solid particle size and solid density on the hydrodynamic characteristics of internal loop airlift reactor with different superficial gas velocities. It was observed that averaged gas holdup is significantly decreased with increasing slurry concentration. Simulations show that the riser gas holdup decreases with increase in solid particle diameter. In addition, it was found that the averaged solid holdup increases in the riser section with the increase of solid density. These produced results reveal that CFD have excellent potential to simulate two-phase and three-phase flow system.

A Development and Application of a Three-Dimensional Model for a CFB Gasifier

The developing energy markets and rising energy system costs have sparked the need to find new forms of energy production and increase the self-sufficiency of energy production. One alternative is gasification, whose principles have been known for decades, but it is only recently when the technology has become a true alternative. However, in order to meet the requirements of modern energy production methods, it is necessary to study the phenomenon thoroughly. In order to understand the gasification process better and optimize it from the viewpoint of ecology and energy efficiency, it is necessary to develop effective and reliable modeling tools for gasifiers. The main aims of this work have been to understand gasification as a process and furthermore to develop an existing three-dimensional circulating fluidized bed modeling tool for modeling of gasification. The model is applied to two gasification processes of 12 and 50 MWth. The results of modeling and measurements have been compared and subsequently reviewed. The work was done in co-operation with Lappeenranta University of Technology and Foster Wheeler Energia Oy.

Prevalence of Lettuce mosaic virus - common strain on three lettuce producing areas from São Paulo State

LMV is one of the most important pathogens of lettuce worldwide. Based on their ability to overcome the resistance genes mo1¹ and mo1² in lettuce, isolates can be divided in two types: LMV-Most, which can infect and are seed-borne in cultivars containing the mo1 gene and LMV-Common, which do not cause symptoms on these cultivars and are seed transmitted only in susceptible cultivars. To evaluate the occurrence of these two types of LMV isolates, a survey was carried out during 2002-2005 in three lettuce production areas from São Paulo State. Total RNA was used for the diagnosis of LMV isolates by RT-PCR using universal primers for the variable N-terminus of the capsid protein, in the 3' end of the genome. Positives samples were analyzed by a second RT-PCR using specifics primers for LMV-Most isolates designed to amplify a fragment from the central region (CI-VPg) of the genome. A total of 1362 samples showing mosaic symptoms were collected and 504 (37.29 %) were positives for LMV. On susceptible lettuce cultivars, LMV-Common was prevalent (77.3%). LMV-Most was found frequently associated with tolerant (mo1¹) lettuce cultivars. Susceptible cultivars correspond today for most of the area of lettuce production. So, despite the ability of LMV-Most isolates to overcome the resistance provided by the recessive mo1¹ gene, they are not prevalent in the conditions of São Paulo State.

New computer software for defining the three-dimensional geometry for a centrifu- gal compressor impeller

In this thesis, a computer software for defining the geometry for a centrifugal compressor impeller is designed and implemented. The project is done under the supervision of Laboratory of Fluid Dynamics in Lappeenranta University of Technology. This thesis is similar to the thesis written by Tomi Putus (2009) in which a centrifugal compressor impeller flow channel is researched and commonly used design practices are reviewed. Putus wrote a computer software which can be used to define impeller’s three-dimensional geometry based on the basic geometrical dimensions given by a preliminary design. The software designed in this thesis is almost similar but it uses a different programming language (C++) and a different way to define the shape of the impeller meridional projection.

Beyond the obvious : three acts in educational drama

Researching research is not a common theme in educational drama. Nor is the educational drama process from a participant perspective a typical focus of research, at least not if the participants are disabled. Yet this is the theme of this thesis, a drama in three acts. The aim of this thesis is to describe, analyse, and discuss both the ways in which research within educational drama can be carried out and represented, and the experiences of the participants of the educational drama process. The theoretical framework that steers the research process is built up of two pairs of frames, each of them, like Russian nesting dolls, containing further frames. The first frame, relating to the outcomes of conducting research in educational drama, comprises philosophical, representational, and personal theories. As the second question asks what educational drama is, the subject related frame is built up of pedagogical, drama educational, and aesthetic theories. The study in its entirety follows the structure of the researcher’s hermeneutical learning process and takes the form of a journey starting from what is familiar, stretching towards what is new and different, and finally returning back to the beginning with a new view on what was there at the start. The thesis consists of two separate but related studies. The first, a familiar study conducted earlier, Alpha in Act I, was carried out among upper secondary school pupils. In the second, the new and therefore unfamiliar study, Omega in Act III, the participants are adult individuals who are physically and communicatively disabled. In between these two Acts an element of “Verfremdung” where the Alpha study is systematically scrutinized as the purpose is to teach and to manage the reader to think. Meta-discussions on the philosophical issues of the study are conducted throughout the text, parallel to the empirical parts. The outcomes of the first research question show that philosophical, methodical, and representational consistency is crucial for research. While this may sound like stating the obvious, this has nevertheless not always been considered fact, especially not within qualitative research. The outcomes further stress that representational issues are also to be recognized when presenting non-rational aspects of educational drama. By wording the world, through the use of visualising language, the surplus of meanings of educational drama can be, as they are within this study, made visible, sensible, and almost tangible, not only cognitively understandable. The outcomes of the second question point to the different foci of the studies, with Alpha focusing on the rationally retold experiences and Omega focusing on nonrational experiences. The outcomes expose educational drama as a learning process comprising doing, reflecting, and being. The doing aspect communicates the concrete efforts in creating a piece of theatre, while the being aspect relates experiences of being as situated, embodied and sensuous, reciprocal, empowering, aesthetic and artistic, and existential. Reflection is the twine that runs throughout the process and connects both doing and being. In summary, the outcomes could be formulated as “learning from learning how to make theatre”.

Stability of Citrus tristeza virus protective isolate 'Pêra IAC' according to SSCP analysis of old and new lines of three sweet orange varieties

Clonal cleaning, followed by pre-immunization with protective complexes of Citrus tristeza virus(CTV), allowed the commercial cultivation of Pêra sweet orange, a variety that has great importance for Brazilian citriculture but is sensitive to the virus. The use of mild protective isolates in other citrus varieties, even those more tolerant to CTV, can also be of interest to prevent the spread of severe isolates. The aim of this study was to characterize, by means of SSCP (Single Strand Conformational Polymorphism) analysis of the coat protein gene, CTV isolates present in plants of the sweet orange cultivars Pêra, Hamlin and Valencia propagated from four budwood sources: 1) old lines, 2) nucellar lines, 3) shoot-tip-grafted lines, and 4) shoot-tip-grafted lines pre-immunized with the mild CTV protective isolate 'PIAC'. We also evaluated the correlation of the obtained SSCP patterns to stem pitting intensity, tree vigor and fruit yield. SSCP results showed low genetic diversity among the isolates present in different trees of the same variety and same budwood source and, in some cases, in different budwood sources and varieties. Considering tristeza symptoms, lower intensity was noted for plants of new, shoot-tip-grafted and pre-immunized shoot-tip-grafted lines, compared to old lines of the three varieties. The observed SSCP patterns and symptomatology suggested that more severe CTV complexes infect the plants of old lines of all three varieties. The protective complex stability was observed in the SSCP patterns of CTV isolates of some shoot-tip-grafted and pre-immunized clones. It was concluded that the changes detected in other electrophoretic profiles of this treatment did not cause loss of the protective capacity of CTV isolate 'PIAC' inoculated in the pre-immunization.

Chloroplastid pigment contents and chlorophyll a fluorescence in Amazonian tropical three species

Plants react to changes in light and hydrological conditions in terms of quantity and composition of chloroplastidic pigments, which affects the photosynthetic properties and consequently the accumulation of plant biomass. Thus, the chloroplastidic pigment concentration and chlorophyll a fluorescence of three Amazonian species (Bertholletia excelsa, Carapa guianensis e Dipteryx odorata) were investigated in sun and shade leaves form the tree crown collected during two distinct periods of precipitation (dry and rainy seasons). Pigment contents were determined by spectrophotometry and fluorescence variables were determined using a portable fluorometer. The results demonstrated that the species showed high concentrations of Chl a, Chl b e Chl total during the wet season in relation to the dry season, especially in shade leaves. A higher concentration of carotenoids was found in B. excelsa, when compared with leaves of C. guianensis and D. odorata. In leaves of B. excelsa and D. odorata no significant difference was found in relation to the photochemistry of photosystem II (Fv/Fm) between the wet and dry seasons. In conclusion, the three species react differently to variations in the light and precipitation conditions regarding light capture, aspects that might be considered in the management of forest plantations.

Apple, Nokia and RIM – Rivalry and Co-operation between Three Mobile Phone Corporations

The purpose of this paper is to gather enough evidence to speculate the future of Nokia, Rim and Apple. The thesis goes over the history, current events and business model of each company. This paper includes differences between the companies and co-operation and rivalry, such as patent infringement cases. The study is limited to smartphones and their future. The result of this study is that Apple will continue its steady increase in market share, while Nokia will first decrease and after the launch of the Windows Phone it will rise again. RIM‟s result has not been as good as in past years and it has lost market share. The decrease of share price may lead to acquisition by a company interested in RIM technology.

Modelling of combustion and sorbent reactions in three-dimensional flow environment of a circulating fluidized bed furnace

This thesis presents a three-dimensional, semi-empirical, steady state model for simulating the combustion, gasification, and formation of emissions in circulating fluidized bed (CFB) processes. In a large-scale CFB furnace, the local feeding of fuel, air, and other input materials, as well as the limited mixing rate of different reactants produce inhomogeneous process conditions. To simulate the real conditions, the furnace should be modelled three-dimensionally or the three-dimensional effects should be taken into account. The only available methods for simulating the large CFB furnaces three-dimensionally are semi-empirical models, which apply a relatively coarse calculation mesh and a combination of fundamental conservation equations, theoretical models and empirical correlations. The number of such models is extremely small. The main objective of this work was to achieve a model which can be applied to calculating industrial scale CFB boilers and which can simulate all the essential sub-phenomena: fluid dynamics, reactions, the attrition of particles, and heat transfer. The core of the work was to develop the model frame and the required sub-models for determining the combustion and sorbent reactions. The objective was reached, and the developed model was successfully used for studying various industrial scale CFB boilers combusting different types of fuel. The model for sorbent reactions, which includes the main reactions for calcitic limestones, was applied for studying the new possible phenomena occurring in the oxygen-fired combustion. The presented combustion and sorbent models and principles can be utilized in other model approaches as well, including other empirical and semi-empirical model approaches, and CFD based simulations. The main achievement is the overall model frame which can be utilized for the further development and testing of new sub-models and theories, and for concentrating the knowledge gathered from the experimental work carried out at bench scale, pilot scale and industrial scale apparatus, and from the computational work performed by other modelling methods.