Technical guidelines for management of fisheries resources, biodiversity and environment of Victoria basin lakes

Lake victoria is the second largest lake in the world.the lake is shatred between three East African countries (Kenya,Uganda and Tanzania) the lake basin is estimatedto have about 30 million people who depend on it as a source of fish for food,employment,income and recreation.the lake is transport locally and regionally is used for recreation and is recongnised internationally for its high fish species diversity of ecological and scientific value. This document in the first in a series to be produced on different fish production systems in Uganda and should stimulate discussions and comments to guide application of scientific findings into the policy environment.

The role of social,economic and cultural factors in the management of satellite lake fisheries in Uganda

The fisheries of small lakes are important for producing fish for local populations not clear the larger lakes.The satelite support important fisheries and other economic activities like fishing water for domestic purpose and tourism besides socio-cultural functions.

Some problems and issues of sustainable management of mangrove ecosystems of Tamil Nadu, India

Mangrove, a tidal wetland, is a good example of complex land and water system whose resource attributes is neither fully understood from an ecological perspective nor valued comprehensively in economic terms. With increased ecological and social perception of the functions of wetlands, the utility and relative values will increase. The perception, however, varies from society to society. It must be recognized that mangrove forests differ greatly in local conditions and in their ability to produce a wide variety of economic products. What may be highly productive strategy for one country may have little meaning to its neighbor. Therefore, it becomes essential that from among diversity of potential uses of the mangrove environment, specific uses will have to be decided, and management plan developed on site, or area specific basis. It is therefore necessary to arrive at a balance between the views of the ecologists and economists on the management of mangroves. Biological conservation should encompass resource management in the sense that integrity of the biological and physical attributes of the resource base should be sustained and man-induced management practices should not alter an ecosystem to the extent that biological production is eliminated. Sustained yield management for food, fiber and fuel would serve to sustain local fisheries while generating new economic enterprises. This requires the recognition of mangrove environment as a resource with economic value, and managed according to local conditions and national priorities.

Management of the nile perch, Lates niloticus, fishery in Lake Victoria in light of the changes in its life history characteristics

Nile perch, Lates niloticus Linnaeus, 1758, is a predatory fish of high commercial and recreational value. It can grow to a length of 2 m and a weight of 200 kg. In Uganda, Nile perch was originally found only in Lake Albert and the River Nile below Murchison Falls. The species is, however, widely distributed in Africa, occurring in the Nile system below Murchison Falls, the Congo, Niger, Volta, Senegal and in Lakes Chad and Turkana (Greenwood 1966).

Advanced thermal processing of semiconductor materials in the msec-range

This paper reviews the advances that flash lamp annealing brings to the processing of the most frequently used semiconductor materials, namely silicon and silicon carbide, thus enabling the fabrication of novel microelectronic structures and materials. The paper describes how such developments can translate into important practical applications leading to a wide range of technological benefits. Opportunities in ultra-shallow junction formation, heteroepitaxial growth of thin films of cubic silicon carbide on silicon, and crystallization of amorphous silicon films, along with the technical reasons for using flash lamp annealing are discussed in the context of state-of-the-art materials processing. © 2005 IEEE.

Transient thermal analysis of power devices based on Fourier-series thermal model

A new thermal model based on Fourier series expansion method has been presented for dynamic thermal analysis on power devices. The thermal model based on the Fourier series method has been programmed in MATLAB SIMULINK and integrated with a physics-based electrical model previously reported. The model was verified for accuracy using a two-dimensional Fourier model and a two-dimensional finite difference model for comparison. To validate this thermal model, experiments using a 600V 50A IGBT module switching an inductive load, has been completed under high frequency operation. The result of the thermal measurement shows an excellent match with the simulated temperature variations and temperature time-response within the power module. ©2008 IEEE.

Population dynamics and the management of the goat fish Upenaeus sulphureus from the Bay of Bengal

FiSAT program was used to estimate population parameters of Upenaeus sulphureus from length frequency data. Loc and K were found to be 22.7 em and 0.98 year1 respectively. The Wetherall plot provided an estimate of L= and Z/K were 21.585 em and 4.759 respectively. The annual rate of natural and fishing mortality were estimated as 1.91 and 3.86 respectively. The exploitation rate was 0.668. The selection pattern Lc was 10.824 em. Recruitment pattern suggest of two uneven seasonal pulses in March-April and August-October. Peaks appeared in August-October. Maximum yield could be achieved simultaneously increasing length at first capture to 10.0 em. The length weight relationship was found to be W =0.03065 Lz.8328. Highest yield and price could be achieved by decreasing the fishing mortality to 0.9 coefficient rate.

Improved infrared thermal imaging of a CMOS MEMS device

We report a technique which can be used to improve the accuracy of infrared (IR) surface temperature measurements made on MEMS (Micro-Electro-Mechanical- Systems) devices. The technique was used to thermally characterize a SOI (Silicon-On-Insulator) CMOS (Complementary Metal Oxide Semiconductor) MEMS thermal flow sensor. Conventional IR temperature measurements made on the sensor were shown to give significant surface temperature errors, due to the optical transparency of the SiO 2 membrane layers and low emissivity/high reflectivity of the metal. By making IR measurements on radiative carbon micro-particles placed in isothermal contact with the device, the accuracy of the surface temperature measurement was significantly improved. © 2010 EDA Publishing/THERMINIC.

Thermal characterization of SOI CMOS micro hot-plate gas sensors

This work reports on thermal characterization of SOI (silicon on insulator) CMOS (complementary metal oxide semiconductor) MEMS (micro electro mechanical system) gas sensors using a thermoreflectance (TR) thermography system. The sensors were fabricated in a CMOS foundry and the micro hot-plate structures were created by back-etching the CMOS processed wafers in a MEMS foundry using DRIE (deep reactive ion etch) process. The calibration and experimental details of the thermoreflectance based thermal imaging setup, used for these micro hot-plate gas sensor structures, are presented. Experimentally determined temperature of a micro hot-plate sensor, using TR thermography and built-in silicon resistive temperature sensor, is compared with that estimated using numerical simulations. The results confirm that TR based thermal imaging technique can be used to determine surface temperature of CMOS MEMS devices with a high accuracy. © 2010 EDA Publishing/THERMINIC.

Population dynamics and the management of the Indian mackerel Rastrelliger kanagurta from the Bay of Bengal

FiSAT program was used to estimate population parameters of Rastrelliger kanagurta from length frequency data. Loc and K were found to be 27.4 em and 0.90 year1 respectively. The Wetherall plot provided an estimate of Loc and Z/K were 26.7 cm and 4.683 respectively. The annual rate of natural and fishing mortality were estimated as 1.71 and 3.21 respectively. The exploitation rate was 0.652. The selection pattern L50 was 18.09 cm. Recruitment pattern suggests two seasonal pulses one in March-May and another in September-October. Peak recruitment appeared in March-May. Maximum yield could be achieved by decreasing length at first capture to 13.0 em. The relationship between total length and body weight was found to be W = 0.01583 L8952. Yield and stock prediction analysis suggested that highest yield and price could be achieved by decreasing the fishing mortality to 2.0 coefficient rate.

Abundance, migration and management of Jatka (juvenile hilsa, Tenualosa ilisha) in the Gajner Beel, Pabna, Bangladesh

Studies on the abundance, migration and management of Jatka (juvenile hilsa, Tenualosa ilisha) were conducted in the Gajner Beel, located at the south-east corner of the Pabna Irrigation and Rural Development Project (PIRDP) in Sujanagar Upazila of Pabna district, Bangladesh. The main Jatka season was found to be extended from mid August to mid October. Veshal/Bandh/Khora Jal (lift net) and Ber Jal (beach seine net) were found as the major gears involved in Jatka fishing. The estimated total amount of Jatka caught from the Beel during the studied season was 46.2 t. The migratory route of Jatka is extended from the Padma and/or Jamuna rivers to the Badai river and then to the Beel through the sluice gate. The possibility of breeding of hilsa in the Beel was nullified. Finally, a community based management plan was suggested for implementation by the Gajner Beel management committee.

Automated meshing for aero-thermal analysis of complex automotive geometries

Successful product development, especially in motorsport, increasingly depends not just on the ability to simulate aero-thermal behavior of complex geometrical configurations, but also the ability to automate these simulations within a workflow and perform as many simulations as possible within constrained time frames. The core of these aero-thermal simulations - and usually the main bottleneck - is generating the computational mesh. This paper describes recent work aimed at developing a mesh generator which can reliably produce meshes for geometries of essentially arbitrary complexity in an automated manner and fast enough to keep up with the pace of an engineering development program. Our goal is to be able to script the mesh generation within an automated workflow - and forget it. © 2011 SAE International.

Management of euglenophytes in aquaculture ponds for improvement of fish production

Four experiments each with three replications were conducted in 12 experimental ponds to control the euglenophytes bloom viz. treatment 1 (T1, covering of one third of the water surface by duckweed (Lemna minor); treatment 2 (T2), application of 123.5 kg lime/ha/month; treatment 3 (T3), use of both duckweed as in T1 and lime as in T2; treatment 4 (T4) was considered as control where neither duckweed nor lime was applied. Fishes comprising of rohu (Labeo rohita), catla (Catla catla), mrigal ( Cirrhinus cirrhosus), silver carp (Hypophthalmichthys molitrix) and silver barb (Barbonymus gonionotus) were stocked at the rate of 1080 fishes/ha with the species ratio of 8:4:6:9:13, respectively. The lowest cell density of euglenophytes was found in the ponds of T3 followed by T2, and T1. In the ponds of T3, euglenophytes bloom did not occur possibly due to alkaline pH, shade and nutrient absorption by duckweed. Thin bloom was observed in the ponds of T1 where pH was neutral or slightly alkaline. The grazing on euglenophytes by the silver carp and silver barb also had some contribution in controlling the bloom. Growth of fishes was comparatively higher in the ponds of T3 and T1, which might be due to better water quality and availability of adequate food while the lower fish growth as recorded from the ponds of T4 might be due to euglenophytes bloom. Thick bloom inhibited light penetration which hampered photosynthesis and growth of other phytoplankton that are the preferred food of planktivorous fishes. Mortality of fishes in ponds having euglenophytes bloom was possibly due to formation of anoxic situation in the early morning or due to the combined effect of anoxic situation and toxic metabolites secretion by the euglenophytes.