Automated meshing for aero-thermal analysis of complex automotive geometries

Successful product development, especially in motorsport, increasingly depends not just on the ability to simulate aero-thermal behavior of complex geometrical configurations, but also the ability to automate these simulations within a workflow and perform as many simulations as possible within constrained time frames. The core of these aero-thermal simulations - and usually the main bottleneck - is generating the computational mesh. This paper describes recent work aimed at developing a mesh generator which can reliably produce meshes for geometries of essentially arbitrary complexity in an automated manner and fast enough to keep up with the pace of an engineering development program. Our goal is to be able to script the mesh generation within an automated workflow - and forget it. © 2011 SAE International.

Effect of thermal pollution on the hydrological parameters of River Jhelum (J & K)

The Buniyar hydroelectric project and the lower Jhelum Barrier at Gantamulla constructed across river Jhelum are in operation from several years. The two power stations have changed the hydrological features of the area where dam is situated. Therefore, the impact of hydroelectric projects on fishery resources of river Jhelum is a matter of great concern. The treated water from the power house is released through turbines, having cooling effect on them. The change in the hydrological parameters such as increase in temperature, depletion of oxygen etc. might have brought fishes under stress which is the main cause in decreased population of finfishes from site to site. The golden mahseer, Tor putitora which was once an abundant species in river Jhelum has disappeared due to human intervention. The prevailing water quality around hydroelectric projects is unsuitable for finfishes of river Jhelum.

Smoke curing of mussels

Substantial quantities of green mussels are available on the Kerala coast particularly from Calicut to north. But these are not properly exploited at present. Simple and economic methods of processing like drying and smoking can go a long way towards market promotion and better returns to the fishermen. This paper reports the method of preparation of smoked mussels which have a great potential for export as well as local marketing.

Studies on smoke curing and preservation of oil sardine (Sardinella longiceps)

A method is reported for smoke curing of oil sardine (Sardinella longiceps) by dry salting in the ratio of 1:6 (salt to fish), followed by smoking in the traditional smoke chamber in two stages, (1) at 45°C for 3h hand (2) at 75°C for 2h with smoke generated from coconut husk, wood shavings and saw dust in 2:2:1 proportion. The product obtained had good odour, flavour, golden yellow colour and a shelf-life of 8 weeks at room temperature (26 to 28°C)

Time lag between catching and curing of fish and its influence on the finished product. 1. Mackerel

A study is made to determine the maximum permissible time lag both under iced and not iced storage conditions between the catching of mackerel (Rastrelliger kanagurta) and its curing, so that the quality of the finished product is within tolerable limits. Based on physical, chemical, bacteriological and taste panel studies the maximum time lag permissible is fixed as 8hrs under not iced condition and 3 days under iced condition. Icing of fish is also found to affect the tasting qualities of the finished product.

Thermal insulation boards from coconut pith

Processing technique and physical characteristics of thermal insulation boards prepared from coconut pith using rubber latex as the binding agent are reported in this communication. In view of the easy processing, low cost and comparable physical properties with other insulating materials available indigenously, manufacture of these boards appears to be promising.

Studies on thermal deffusivity [i.e. diffusivity] and conductivity of fresh and dry fish

Thermal diffusivity (α) and conductivity (K) of fresh and dry cured fish at different moisture levels were investigated by a calorimeter (regular regime) method and transient line source technique. Thermal conductivity has a linear correlation with packing density and percentage water content. K values calculated from formula method and line source technique are comparable.

A review on oil sardine 2. Preservation by canning, curing and smoking

Commercial canning of oil sardine (Sardinella longiceps) in India is a relatively new procedure. Although 7 firms are engaged in canning this compares poorly with the abundance of the fish. There are often wide variations in the quality of the canned fish and important chemical and physical variations occur in the product once canned. A description of the canning process is given, and production figures compared to those of other countries. Production figures for 1965 to 1969 are given. These show that production increased from 1.2 to 1.5 million cans, but that there was a peak in 1967 when 3.2 million can s were produced. Exports of canned marine fish by country, and production of caned sardine by country from 1965 to 1970 are tabulated. The types of containers used and the feasibility of exporting canned fish are considered. Finally, the preparation of cured and smoked products is discussed briefly.

Studies on smoke curing of tropical fishes

Fresh mackerel (Rastrelliger kanagurta), catfish (Tachisurus dussumeri) and sole (Cynoglossus dubis) were gutted, cleaned, washed, brined, and smoked. Though it contributes to the quality of the smoked products, salt does not appear to prevent bacterial growth or spoilage at low concentration. In heavily salted products, salt is found to have a definite preservative action. Smoking lasted roughly 5 hrs for mackerel and 4 hrs for sole. Increasing the smoking time gave the product an unpleasant taste. Fish were then sun-dried to 20% moisture. The fish had been prepared in three groups, (1) turmeric-treated, (2) propionate-treated and control. Turmeric treated samples had a very attractive appearance, especially sole. The course of spoilage, as measured by following changes in total volatile nitrogen content, is tabulated. All controls were spoiled within 3 months; the others remained in good condition for 6 months. Turmeric is considered to be an ideal preservative.

Studies on Colombo-curing of mackerel (Rastrelliger kanagurta)

Results of investigations carried out to improve the process of 'Colombo-curing' of mackerel are presented in this paper. Optimum composition of salt and gorujka puli (malabar tamarind, Garcinia cambogea) to be used in the pickle mixture to give a product of good organoleptic and chemical characteristics have been worked out. Sodium benzoate is used as a preservative against the attack of molds, 'red' etc.

Pickle curing of fish using tartaric acid and garlic as preservatives

Tartaric acid and garlic have proved highly satisfactory as pickling agents when used in combination, giving fishery products of good appearance, texture, taste and shelf life. Full details of the pickling method are given.

Utilization of the fish waste self-brine of fish curing industry as farm fertilizer

Large quantities of self-brine accumulating in curing tanks during the process of commercial fish salting is mostly wasted at present. This liquor exuded from the fish during the process of salting contains considerable amounts of soluble proteins and minerals. Due to the presence of organic matter the self-brine quickly putrefies causing nauseating smell. This renders the whole surroundings insanitary and often leads to health hazards to neighboring localities. Any economic method of utilising this waste brine and converting it into some useful product will be a tangible help to the fish curing industry. Hence, a method is given for converting this waste self-brine into a cheap and efficient fertilizer.

Discriminant analysis of selected variables in the adoption of fish curing

Discriminant functions were worked out for adoption or non-adoption of five improved practices in fish curing. Four variables measured quantitatively formed the basis for discrimination. In four out of five equations, the selected variables were found to discriminate significantly between the adopters and non-adopters.