Numbers of migratory waterbirds at Lake Lashihai, China

Between October 1999 and April 2000, WC surveyed the waterbirds at Lake Lashihai, China. A total of 52 species were recorded, of which one species was a resident, 34 were winter visitors, and 17 were passage migrants. Species richness was highest in November. Passage migrants mainly occurred in October, November, and April, and they stayed longer at the lake during their autumn migration than during the spring migration. The seasonal distribution pattern of total numbers of all waterbirds was bimodal. One peak occurred between late December and early January, and the other in middle March. The seasonal distribution patterns of 15 common species have been classified a. bimodal, unimodal, or irregular. The numbers of five common species were variable in middle winter, and their numerical Change in contiguous weeks were more than 30%, suggesting that local movements might be frequent.

Photo-assisted hydrosilylation of silicon nanoparticles: Dependence of particle size on grafting chemistry

Silicon nanoparticles between 2.5 nm and 30 nm in diameter were functionalized by means of photoassisted hydrosilylation reactions in the aerosol phase with terminal alkenes of varying chain length. Using infrared spectroscopy and nuclear magnetic resonance, the chemical composition of the alkyl layer was determined for each combination of particle size and alkyl chain length. The spectroscopic techniques were used to determine that smaller particles functionalized with short chains in the aerosol phase tend to attach to the interior (β) alkenyl carbon atom, whereas particles >10 nm in diameter exhibit attachment primarily with the exterior (α) alkenyl carbon atom, regardless of chain length. © 2011 American Chemical Society.

Biology, ecology and the fishery of Mukene, Rastrineobola argentea

Food and feeding, condition factor, breeding periods, growth and size at first maturity of a small pelagic cyprinid Rastrineobola argentea (P.) in Lake Victoria are determined. Fishing gears and methods that have been used in the exploitation of the species and could be harmful to the fishery are outlined. Management measures leading to possible sustainable exploitation of the fishery are suggested. Adult R. argentea feed on zooplankton during daytime. Juveniles feed on planktonic early instars of lakefly larvae. Although the species breeds throughout the year, two breeding peaks were observed during the drier months of August and December January. Least breeding was observed in the rainy months of April-May and October November. Fishes from the open water station at Bugaia showed higher numbers of breeding individuals than those from inshore areas. The mean monthly condition factor of fish from Napoleon Gulf confirmed breeding peaks as obtained from the number of fish with ripe gonads. The species showed a mean instantaneous growth rate (K) of 1.75 and attains length infinity (Lx) of 54mm. Females of the species in these waters show a reduced size at maturity as compared to ten years ago when exploitation of the species was at minimal levels. The males have however not changed much.

Freshwater medusae in Lake Kyoga

Freshwater medusae have been observed in Lake Kyoga by several members of the Fisheries Department on a few isolated occasions over the past two years. Sightings have been made at Lwampanga at the western end of the lake, at Bukungu near the inlet of the River Nile into Lake Kyoga, and at Lalle, on the eastern extremity of the main lake. Most sightings have been made near the margin of the lake under very calm conditions. At Lalle and Lwampanga large numbers of medusae have been seen swimming near the surface; on these occasions, the medusae were pulsating regularly and maintained a position within a few inches of the surface. Apart from noting that sightings have occurred under calm conditions near the lake margin, no other observations to indicate when medusae are likely to be seen have been made. Most of the medusae are of similar size, the largest being 12 mm in diameter.

The fish stocks in Uganda aquatic systems: opportunities and challenges for transformation

The status of fish stocks in a water body at any one time is a function of several factors affecting the production of fish in that water body. These include: total number (abundance) and biomass(weight) present, growth (size and age), recruitment (the quantity of fish entering the fishery) including reproduction, mortality which is caused by fishing or natural causes, Other indirect factors of major importance to the status of the stocks include production factors (water quality and availability of natural food for fish), the life history parameters of the different species making up the stocks (e.g. sex ratios, condition of the fish, reproductive potential (i.e. fecundity) etc), Changes in fish stocks do occur when any of the above listed factors directly influence aspects of growth, reproduction and mortality and therefore, numbers and standing stock (biomass). In the exploited fisheries, major research concerns regarding stocks relate to the listed factors especially: estimates of stock abundance/biomass, the quantity of fish being caught,where the fish are caught, which species are caught (relative abundance)when the fish are caught, how the fish are caught. The balance between stock abundance and amount of fish caught provides the basis for intervention. Due to the diverse characteristics of the physical water environment, fishes are in general, not evenly distributed throughout a water body. Shallow and vegetated areas tend to support higher abundance and diversity of fish species. In addition, seasonal variations in fish abundance are so strong that fluctuations in catch have to be expected at fish landings.

Observations on the influences of codend mesh size on bottom trawl catches in Lake Victoria, with emphasis on the Haplochromis population

Codends of four different mesh size" were compared during exploratory bottom trawling on Lake Victoria. Small mesh sizes (19 and 38 mm) generally caught greater quantities of fish than large mesh sizes (64 and 76 mm) with haplochromis species responsible for the difference. The differences in catch rates were most pronounced where dense concentration of small haplochromis were found. This was generally in shallow water since the average size of haplochromis tends to increase with depth. Catch rates for species other than haplochromis were fairly similar for the codends tested, although there were indications of lower catches in small mesh coderlds fished through dense haplochromis concentrations. For haplochromis fished with 64 and 38 mm eodends, the estimated 50% retention lengths were 13.6 and 8.0 cm, respectively. The predicted value for the 19 mm codend was 4.5 cm.

Possible fish stock size assessment and available production survey as developed on Lake Kariba

This paper is an outline of methods practically useful for the evaluation of ichthyomass, fish abundance, available production and yield in lakes and rivers. Terms and concepts are reviewed, and difficulties stemming from the use of "predetermined" mathematical models are discussed. Sampling with toxicants in blocked-off areas was found to be the most practical method and is described in detail. For the total estimation of ichthyomass the spatial ranges of fish distribution must be determined; the results of echo-sounding surveys for horizontal, vertical, topographical, seasonal and diel fish distribution are given. Some of the most important methods for computing available production are listed and applied to Lake Kariba as an example. In particular, a method based on the balance between the main predator and prey species is reviewed. The ecological production survey concept is finally stressed as applied to multispecies fish stocks.

Techniques to improve the shear strength of impacted bone graft: the effect of particle size and washing of the graft.

BACKGROUND: When fresh morselized graft is compacted, as in impaction bone-grafting for revision hip surgery, fat and marrow fluid is either exuded or trapped in the voids between particles. We hypothesized that the presence of incompressible fluid damps and resists compressive forces during impaction and prevents the graft particles from moving into a closer formation, thus reducing the graft strength. In addition, viscous fluid such as fat may act as an interparticle lubricant, thus reducing the interlocking of the particles. METHODS: We performed mechanical shear testing in the laboratory with use of fresh-frozen human femoral-head allografts that had been passed through different orthopaedic bone mills to produce graft of differing particle-size distributions (grading). RESULTS: After compaction of fresh graft, fat and marrow fluid continued to escape on application of normal loads. Washed graft, however, had little lubricating fluid and better contact between the particles, increasing the shear resistance. On mechanical testing, washed graft was significantly (p < 0.001) more resistant to shearing forces than fresh graft was. This feature was consistent for different bone mills that produced graft of different particle-size distributions and shear strengths. CONCLUSIONS: Removal of fat and marrow fluid from milled human allograft by washing the graft allows the production of stronger compacted graft that is more resistant to shear, which is the usual mode of failure. Further research into the optimum grading of particle sizes from bone mills is required.

Techniques to improve the shear strength of impacted bone graft: The effect of particle size and washing of the graft

Background: When fresh morselized graft is compacted, as in impaction bone-grafting for revision hip surgery, fat and marrow fluid is either exuded or trapped in the voids between particles. We hypothesized that the presence of incompressible fluid damps and resists compressive forces during impaction and prevents the graft particles from moving into a closer formation, thus reducing the graft strength. In addition, viscous fluid such as fat may act as an interparticle lubricant, thus reducing the interlocking of the particles. Methods: We performed mechanical shear testing in the laboratory with use of fresh-frozen human femoral-head allografts that had been passed through different orthopaedic bone mills to produce graft of differing particle-size distributions (grading). Results: After compaction of fresh graft, fat and marrow fluid continued to escape on application of normal loads. Washed graft, however, had little lubricating fluid and better contact between the particles, increasing the shear resistance. On mechanical testing, washed graft was significantly (p < 0.001) more resistant to shearing forces than fresh graft was. This feature was consistent for different bone mills that produced graft of different particle-size distributions and shear strengths. Conclusions: Removal of fat and marrow fluid from milled human allograft by washing the graft allows the production of stronger compacted graft that is more resistant to shear, which is the usual mode of failure. Further research into the optimum grading of particle sizes from bone mills is required. Clinical Relevance: Understanding the mechanical properties of milled human allograft is important when impaction grafting is used for mechanical support. A simple means of improving the mechanical strength of graft produced by currently available bone mills, including an intraoperative washing technique, is described.

A decline in fish catches and the size of Oreochromis niloticus in Lake Wamala (Uganda) following human exploitation

The fishery of Lake Wamala has declined since the lake was stocked in 1956 and opened to fishing during the 1960s. Surveys were conducted on the lake during 1975/78 and 1988/92 to investigate the causes of declining fish catches. The lake produced an average of 4000 - 6000 tonnes of fish annually from 1960s through 1970s. Total fish catches decreased from a maximum of 7100 tonnes in 1967 to less than 500 tonnes by 1990s. Catch rates decreased from about 8 kg in the 1960s to less than 1 kg per net per night by 1975. During the 1970s the catch was dominated by Oreochromis niloticus (67%) followed by Clarias gariepinus (17%), and Protopterus aethiopicus (15.1 %). By 1990s the proportion of O. niloticus had decreased to 45.1% while that of P. aethiopicus had increased to 37.6%. These changes seem to have been caused by overfishing resulting from increased fishing effort from the recommended 250 to about 1000 boats and the additional increase in effort through driving fish into the nets by beating water. The maximum size of O. niloticus in the fishery decreased from 32 cm total length in 1975/78 to 22 cm in 1988/92 while the size at first maturity decreased from about 21 cm to 14 cm during the period. This has been concurrent with a shift in the mesh size of gillnet used from 127 mm (5") in 1960s to 64 mm by 1990s. Environmental changes, especially in lake level in 1980, may also have affected the fishery.

An investigation of the kinetics of CO2 uptake by a synthetic calcium based sorbent

This study examines the kinetics of carbonation by CO2 at temperatures of ca. 750 °C of a synthetic sorbent composed of 15 wt% mayenite (Ca12Al14O33) and CaO, designated HA-85-850, and draws comparisons with the carbonation of a calcined limestone. In-situ XRD has verified the inertness of mayenite, which neither interacts with the active CaO nor does it significantly alter the CaO carbonation–calcination equilibrium. An overlapping grain model was developed to predict the rate and extent of carbonation of HA-85-850 and limestone. In the model, the initial microstructure of the sorbent was defined by a discretised grain size distribution, assuming spherical grains. The initial input to the model – the size distribution of grains – was a fitted parameter, which was in good agreement with measurements made with mercury porosimetry and by the analysis of SEM images of sectioned particles. It was found that the randomly overlapping spherical grain assumption offered great simplicity to the model, despite its approximation to the actual porous structure within a particle. The model was able to predict the performance of the materials well and, particularly, was able to account for changes in rate and extent of reaction as the structure evolved after various numbers of cycles of calcination and carbonation.

Group Size and Composition of Black．and．White Snub．nosedMonkey(rhinopithecus)Estimated by Faecesof Sleeping Sites at Baima Snow Mountain

介绍了应用过夜地粪便来估计白马雪山黑白仰鼻猴群大小和组成的一种方法。该物种以单雄多雌单 元和全雄组的形式在树上过夜。粪粒根据其大小可分为3种类型：成年雄性的(最大)、成年雌性的(中等大小)和 未成年个体的(最小)。2000一2001年，搜集了滇西北白马雪山国家级自然保护区北部南任村(99。04 7E，28。34 7N) 附近黑白仰鼻猴群每个季节2个过夜地的粪粒。根据2001年11月猴群通过开阔地的数据来确定猴群组成。每个 季节，由于单雄多雌单元的成年个体数与其粪粒数正相关，所以二者回归直线的斜率可以看作是每个个体每晚 的平均排便量。由于该物种的栖息地主要为高山峡谷，而且能见度较低，因此，利用过夜地粪便比以前通过猴群 活动痕迹来估计猴群大小和组成相对准确、可靠。从估计成年雌性个体数的角度看，利用粪粒来估计种群大约有 9．4％的偏差。导致偏差的可能原因有杂草和灌丛对粪粒准确计数的影响、个体排粪率的差异以及成年雄性最小 粪粒与成年雌性最大粪粒的混淆等。该方法适应于栖息地和主要食物与本文研究种群相似的其他种群。

CRANIODENTAL VARIATION OF MACAQUES ( Macaca ): SIZE,FUNCTION AND PHYLOGENY

为了研究猕猴属的颅骨差异性, 从而探 讨种间在形态、功能和系统分化方面的相互联系, 测定了11 个猕猴种类的77 个颅骨变量, 用于主成 分分析和判别分析。应用巢式分析方法, 分析过程 包括3 个步骤。所有变量根据功能和部位的不同首 先分为7 个单位: 下颌、下颌齿、上颌齿、上面 颅、下面颅、面颅后部和颅腔。第2 步根据它们所 揭示的相似性(具有相同的种间及种内差异性类 型) 合并为3 个解剖区域: 咀嚼器官(下颌、下颌 齿、上颌齿) , 面颅(上面颅和下面颅) 和整个面 颅后(面颅后和颅腔) 。第3 步从3 个解剖区域筛 选出27 个变量代表整个颅骨的形态结构。除了寻 找不同的功能单位, 解剖区域及总的颅骨具有不同 的种间和种内差异类型外, 此过程对筛出研究意义 不大的变量起很重要的作用。上述分析过程分别用 于对雌、雄性和两性的研究。所研究的11 个猕猴 种类间形成了3 聚类。第1 类包括食蟹猴(Macaca f ascicularis) 、戴帽猴( M1 sinica) 和头巾猴( M1 radiata) ; 第2 类包括猕猴( M1 mulatta ) 、熊猴 (M1 assensis ) 、平顶猴( M1 nemestrina ) 和黑猿 (M1 nigra) ; 第3 类包括蛮猴( M1 sylvanus ) 、日 本猴( M1 f uscata) 、短尾猴( M1 arctoides ) 和藏 酋猴(M1 thibetana) 。分别从两性差异、食物、生态、分类和系统分化方面进行了差异性讨论, 结果 认为猕猴种间颅骨的差异性主要是由于系统分化不 同而引起个体差异所致, 即种间和种内存在的个体 差异。在主成分分析中, 这些差异在不同的区域表 现在不同的成分上。在咀嚼器官上种间的差异在第 1 主成分上, 种内的差异则在第2 主成分上。面颅 的情况则刚好相反。这两种差异在面颅后及颅腔上 则被第1 和第2 主成分所平分。这样, 种间的差异 在咀嚼器官上大于种内的差异。种内的差异在面颅 上则大于种间的差异。这两种差异在面颅后和颅腔 上则几乎大小相等。这一研究结果表明, 与传统的 概念不同, 第2 主成分不仅仅表现形态、形状的差 异, 而如同第1 主成分一样, 也表现形态的大小成 分。此研究所揭示的猕猴种间关系部分与Foden (1976 , 1980) 和Delson (1980) 相同。如平顶猴 与黑猿、短尾猴、藏酋猴和熊猴的关系。食蟹猴、 头巾猴和戴帽猴的关系则不同, 并已得到有关分子 生物学的支持, 此3 种可能来自同一祖先并经历相 同的扩散过程。此研究所设计的巢式分析过程提供 了一种很好的差异性研究手段。最终结果暗示在形 态学研究中仅仅考虑某一区域的形态结构是很不够 的, 因为不同的部分具有不同的种间及种内差异类 型。这在化石研究中尤其要注意。

An investigation of the kinetics of CO 2 uptake by a synthetic calcium based sorbent

This study examines the kinetics of carbonation by CO 2 at temperatures of ca. 750°C of a synthetic sorbent composed of 15wt% mayenite (Ca 12Al 14O 33) and CaO, designated HA-85-850, and draws comparisons with the carbonation of a calcined limestone. In-situ XRD has verified the inertness of mayenite, which neither interacts with the active CaO nor does it significantly alter the CaO carbonation-calcination equilibrium. An overlapping grain model was developed to predict the rate and extent of carbonation of HA-85-850 and limestone. In the model, the initial microstructure of the sorbent was defined by a discretised grain size distribution, assuming spherical grains. The initial input to the model - the size distribution of grains - was a fitted parameter, which was in good agreement with measurements made with mercury porosimetry and by the analysis of SEM images of sectioned particles. It was found that the randomly overlapping spherical grain assumption offered great simplicity to the model, despite its approximation to the actual porous structure within a particle. The model was able to predict the performance of the materials well and, particularly, was able to account for changes in rate and extent of reaction as the structure evolved after various numbers of cycles of calcination and carbonation. © 2011 Elsevier Ltd.