995 resultados para Single Component
Resumo:
We present here a nonbiased probabilistic method that allows us to consistently analyze knottedness of linear random walks with up to several hundred noncorrelated steps. The method consists of analyzing the spectrum of knots formed by multiple closures of the same open walk through random points on a sphere enclosing the walk. Knottedness of individual "frozen" configurations of linear chains is therefore defined by a characteristic spectrum of realizable knots. We show that in the great majority of cases this method clearly defines the dominant knot type of a walk, i.e., the strongest component of the spectrum. In such cases, direct end-to-end closure creates a knot that usually coincides with the knot type that dominates the random closure spectrum. Interestingly, in a very small proportion of linear random walks, the knot type is not clearly defined. Such walks can be considered as residing in a border zone of the configuration space of two or more knot types. We also characterize the scaling behavior of linear random knots.
Resumo:
OBJECTIVE: To evaluate the clinical performance of glass-ceramic/zirconia crowns fabricated using intraoral digital impressions - a retrospective study with a three-year follow-up. METHODS: 70 consecutive patients with a total of 86 glass-ceramic/zirconia crowns were treated by a single clinician using standardized clinical and laboratory protocols. A complete digital workflow was adopted for the purpose except for the veneering procedure for the glass-ceramic crowns. Occlusal adjustments were made before the ceramic glazing procedure. Before cementation, all abutments where carefully cleaned with a 70% alcoholic solution and air dried. Cementation was performed using dual-curing, self-adhesive resin cement. Patients were re-examined after 12, 24 and 36 months, to assess crown chipping/fractures. RESULTS: After the three-year follow-up, none of the zirconia-based restoration was lost ("apparent" survival rate 100%) otherwise, the chipping rate of the veneering material increased from 9.3% after 12 months, to 14% after 24 months to 30.2% after 36 months. As a consequence, the "real" success rate after 3 years was 69.8%. CONCLUSIONS: After 3 years the success rate of zirconia-based crowns was 69.8%, while the incidence of the chipping was 30.2%. Assuming an exponential increase in chipping rate between 12 and 36 months it can be argued that, among others, the fatigue-mechanism could be advocated as the main factor for the failure of glass-ceramic veneered zirconia especially after 24 months.
Resumo:
Arenaviruses are enveloped negative single strand RNA viruses that include a number of important human pathogens. The most prevalent human pathogen among the arenaviruses is the Old World arenavirus Lassa virus (LASV) which is endemic in West Africa from Senegal to Cameroon. LASV is the etiologic agent of a severe viral hemorrhagic fever named Lassa fever whose mortality rate can reach 30% in hospitalized patients. One of the hallmarks of fatal arenavirus infection in humans is the absence of an effective innate and adaptive immune response. In nature, arenaviruses are carried by rodents which represent the natural reservoirs as well as the vectors for transmission. In their natural rodent reservoir, arenaviruses have the ability to establish persistent infection without any overt signs and symptoms of pathology. We believe that the modulation of the host cell's innate immunity by arenaviruses is a key determinant for persistence in the natural host and for the pathogenesis in man. In this thesis, we studied the interaction of arenaviruses with two main branches of the host's innate anti-viral defense, the type I interferon (IFN) system and virus-induced mitochondrial apoptosis. The arenavirus nucleoprotein (NP) is responsible for the anti-IFN activity of arenaviruses. Specifically, NP blocks the activation and the nuclear translocation of the transcription factor interferon regulatory factor 3 (IRF3) which leads to type I IFN production. LASV and the prototypic arenavirus lymphocytic choriomeningitis virus (LCMV) NPs contain a 3'-5'exoribonuclease domain in the C terminal part that has been linked to the anti-IFN activity of NP. In the first project, we sought to identify cellular component(s) of the type I IFN induction pathway targeted by the viral NP. Our study revealed that LCMV NP prevents the activation of IRF3 by blocking phosphorylation of the transcription factor. We found that LCMV NP specifically targets the IRF-activating kinase IKKs, and this specific binding is conserved within the Arenaviridae. We could also demonstrate that LCMV NP associates with the kinase domain of IKKs involving NP's C-terminal region. Lastly, we showed that the binding of LCMV NP inhibits the kinase activity of IKKs. This study allowed the discovery of a new cellular interacting partner of arenavirus NP. This newly described association may play a role in the anti-IFN activity of arenaviruses but potentially also in other aspects of arenavirus infection. For the second project, we investigated the ability of arenaviruses to avoid and/or suppress mitochondrial apoptosis. As persistent viruses, arenaviruses evolved a "hit and stay" survival strategy where the apoptosis of the host cell would be deleterious. We found that LCMV does not induce mitochondrial apoptosis at any time during infection. Specifically, no caspase activity, no cytochrome c release from the mitochondria as well as no cleavage of poly (ADP-ribose) polymerase (PARP) were detected during LCMV infection. Interestingly, we found that virus-induced mitochondrial apoptosis remains fully functional in LCMV infected cells, while the induction of type IIFN is blocked. Since both type IIFN production and virus- induced mitochondrial apoptosis critically depend on the pattern recognition receptor (PRR) RIG-I, we examined the role of RIG-I in apoptosis in LCMV infected cells. Notably, virus- induced mitochondrial apoptosis in LCMV infected cells was found to be independent of RIG- I and MDA5, but still depended on MAVS. Our study uncovered a novel mechanism by which arenaviruses alter the host cell's pro-apoptotic signaling pathway. This might represent a strategy arenaviruses developed to maintain this branch of the innate anti-viral defense in absence of type I IFN response. Taken together, these results allow a better understanding of the interaction of arenaviruses with the host cell's innate immunity, contributing to our knowledge about pathogenic properties of these important viruses. A better comprehension of arenavirus virulence may open new avenues for vaccine development and may suggest new antiviral targets for therapeutic intervention against arenavirus infections. - Les arenavirus sont des virus enveloppés à ARN simple brin qui comportent un grand nombre de pathogènes humains. Le pathogène humain le plus important parmi les arenavirus est le virus de Lassa qui est endémique en Afrique de l'Ouest, du Sénégal au Cameroun. Le virus de Lassa est l'agent étiologique d'une fièvre hémorragique sévère appelée fièvre de Lassa, et dont le taux de mortalité peut atteindre 30% chez les patients hospitalisés. L'une des caractéristiques principales des infections fatales à arenavirus chez l'Homme est l'absence de réponse immunitaire innée et adaptative. Dans la nature, les arenavirus sont hébergés par différentes espèces de rongeur, qui représentent à la fois les réservoirs naturels et les vecteurs de transmission des arenavirus. Dans leur hôte naturel, les arenavirus ont la capacité d'établir une infection persistante sans symptôme manifeste d'une quelconque pathologie. Nous pensons que la modulation de système immunitaire inné de la cellule hôte par les arenavirus est un paramètre clé pour la persistance au sein de l'hôte naturel, ainsi que pour la pathogenèse chez l'Homme. L'objectif de cette thèse était d'étudier l'interaction des arenavirus avec deux branches essentielles de la défense antivirale innée de la cellule hôte, le système interféron (IFN) de type I et l'apoptose. La nucléoprotéine virale (NP) est responsable de l'activité anti-IFN des arenavirus. Plus spécifiquement, la NP bloque 1'activation et la translocation nucléaire du facteur de transcription IRF3 qui conduit à la production des IFNs de type I. La NP du virus de Lassa et celle du virus de la chorioméningite lymphocytaire (LCMV), l'arénavirus prototypique, possèdent dans leur extrémité C-terminale un domaine 3'-5' exoribonucléase qui a été associé à l'activité anti-IFN de ces protéines. Dans un premier projet, nous avons cherché à identifier des composants cellulaires de la cascade de signalisation induisant la production d'IFNs de type I qui pourraient être ciblés par la NP virale. Nos recherches ont révélé que la NP de LCMV empêche 1'activation d'IRF3 en bloquant la phosphorylation du facteur de transcription. Nous avons découvert que la NP de LCMV cible spécifiquement la kinase IKKe, et que cette interaction spécifique est conservée à travers la famille des Arenaviridae. Notre étude a aussi permis de démontrer que la NP de LCMV interagit avec le domaine kinase d'IKKe et que l'extrémité C-terminale de la NP est impliquée. Pour finir, nous avons pu établir que l'association avec la NP de LCMV inhibe l'activité kinase d'IKKe. Cette première étude présente la découverte d'un nouveau facteur cellulaire d'interaction avec la NP des arenavirus. Cette association pourrait jouer un rôle dans l'activité anti-IFN des arénavirus, mais aussi potentiellement dans d'autres aspects des infections à arénavirus. Pour le second projet, nous nous sommes intéressés à la capacité des arénavirus à éviter et/ou supprimer l'apoptose mitochondriale. En tant que virus persistants, les arénavirus ont évolué vers une stratégie de survie "hit and stay" pour laquelle l'apoptose de la cellule hôte serait néfaste. Nous avons observé qu'à aucun moment durant l'infection LCMV n'induit l'apoptose mitochondriale. Spécifiquement, aucune activité de caspase, aucune libération mitochondriale de cytochrome c ainsi qu'aucun clivage de la polymerase poly(ADP-ribose) (PARP) n'a été détecté pendant l'infection à LCMV. Il est intéressant de noter que l'apoptose mitochondriale induite par les virus reste parfaitement fonctionnelle dans les cellules infectées par LCMV, alors que l'induction de la réponse IFN de type I est bloquée dans les mêmes cellules. La production des IFNs de type I et l'apoptose mitochondriale induite par les virus dépendent toutes deux du récepteur de reconnaissance de motifs moléculaires RIG-I. Nous avons, par conséquent, investigué le rôle de RIG-I dans l'apoptose qui a lieu dans les cellules infectées par LCMV lorsqu'on les surinfecte avec un autre virus pro-apoptotique. En particulier, l'apoptose mitochondriale induite par les surinfections s'est révélée indépendante de RIG-I et MDA5, mais dépendante de MAVS dans les cellules précédemment infectées par LCMV. Notre étude démontre ainsi l'existence d'un nouveau mécanisme par lequel les arénavirus altèrent la cascade de signalisation pro-apoptotique de la cellule hôte. Il est possible que les arénavirus aient développé une stratégie permettant de maintenir fonctionnelle cette branche de la défense antivirale innée en l'absence de réponse IFN de type I. En conclusion, ces résultats nous amènent à mieux comprendre l'interaction des arénavirus avec l'immunité innée de la cellule hôte, ce qui contribue aussi à améliorer notre connaissance des propriétés pathogéniques de ces virus. Une meilleure compréhension des facteurs de virulence des arénavirus permet, d'une part, le développement de vaccins et peut, d'autre part, servir de base pour la découverte de nouvelles cibles thérapeutiques utilisées dans le traitement des infections à arénavirus.
Resumo:
Audit report of Iowa State University of Science and Technology, Ames, Iowa, and its discretely presented component unit as of and for the years ended June 30, 2013 and 2012
Resumo:
Transfer of tumor antigen-specific T-cell receptors (TCRs) into human T cells aims at redirecting their cytotoxicity toward tumors. Efficacy and safety may be affected by pairing of natural and introduced TCRalpha/beta chains potentially leading to autoimmunity. We hypothesized that a novel single-chain (sc)TCR framework relying on the coexpression of the TCRalpha constant alpha (Calpha) domain would prevent undesired pairing while preserving structural and functional similarity to a fully assembled double-chain (dc)TCR/CD3 complex. We confirmed this hypothesis for a murine p53-specific scTCR. Substantial effector function was observed only in the presence of a murine Calpha domain preceded by a TCRalpha signal peptide for shuttling to the cell membrane. The generalization to a human gp100-specific TCR required the murinization of both C domains. Structural and functional T-cell avidities of an accessory disulfide-linked scTCR gp100/Calpha were higher than those of a dcTCR. Antigen-dependent phosphorylation of the proximal effector zeta-chain-associated protein kinase 70 at tyrosine 319 was not impaired, reflecting its molecular integrity in signaling. In melanoma-engrafted nonobese diabetic/severe combined immunodeficient mice, adoptive transfer of scTCR gp100/Calpha transduced T cells conferred superior delay in tumor growth among primary and long-term secondary tumor challenges. We conclude that the novel scTCR constitutes a reliable means to immunotherapeutically target hematologic malignancies.
Resumo:
The Phase I research, Iowa Department of Transportation (IDOT) Project HR-214, "Feasibility Study of Strengthening Existing Single Span Steel Beam Concrete Deck Bridges," verified that post-tensioning can be used to provide strengthening of the composite bridges under investigation. Phase II research, reported here, involved the strengthening of two full-scale prototype bridges - one a prototype of the model bridge tested during Phase I and the other larger and skewed. In addition to the field work, Phase II also involved a considerable amount of laboratory work. A literature search revealed that only minimal data existed on the angle-plus-bar shear connectors. Thus, several specimens utilizing angle-plus-bar, as well as channels, studs and high strength bolts as shear connectors were fabricated and tested. To obtain additional shear connector information, the bridge model of Phase I was sawed into four composite concrete slab and steel beam specimens. Two of the resulting specimens were tested with the original shear connection, while the other two specimens had additional shear connectors added before testing. Although orthotropic plate theory was shown in Phase I to predict vertical load distribution in bridge decks and to predict approximate distribution of post-tensioning for right-angle bridges, it was questioned whether the theory could also be used on skewed bridges. Thus, a small plexiglas model was constructed and used in vertical load distribution tests and post-tensioning force distribution tests for verification of the theory. Conclusions of this research are as follows: (1) The capacity of existing shear connectors must be checked as part of a bridge strengthening program. Determination of the concrete deck strength in advance of bridge strengthening is also recommended. (2) The ultimate capacity of angle-plus-bar shear connectors can be computed on the basis of a modified AASHTO channel connector formula and an angle-to-beam weld capacity check. (3) Existing shear connector capacity can be augmented by means of double-nut high strength bolt connectors. (4) Post-tensioning did not significantly affect truck load distribution for right angle or skewed bridges. (5) Approximate post-tensioning and truck load distribution for actual bridges can be predicted by orthotropic plate theory for vertical load; however, the agreement between actual distribution and theoretical distribution is not as close as that measured for the laboratory model in Phase I. (6) The right angle bridge exhibited considerable end restraint at what would be assumed to be simple support. The construction details at bridge abutments seem to be the reason for the restraint. (7) The skewed bridge exhibited more end restraint than the right angle bridge. Both skew effects and construction details at the abutments accounted for the restraint. (8) End restraint in the right angle and skewed bridges reduced tension strains in the steel bridge beams due to truck loading, but also reduced the compression strains caused by post-tensioning.
Resumo:
The unifying objective of Phases I and II of this study was to determine the feasibility of the post-tensioning strengthening method and to implement the technique on two composite bridges in Iowa. Following completion of these two phases, Phase III was undertaken and is documented in this report. The basic objectives of Phase III were further monitoring bridge behavior (both during and after post-tensioning) and developing a practical design methodology for designing the strengthening system under investigation. Specific objectives were: to develop strain and force transducers to facilitate the collection of field data; to investigate further the existence and effects of the end restraint on the post-tensioning process; to determine the amount of post-tensioning force loss that occurred during the time between the initial testing and the retesting of the existing bridges; to determine the significance of any temporary temperature-induced post-tensioning force change; and to develop a simplified design methodology that would incorporate various variables such as span length, angle-of-skew, beam spacing, and concrete strength. Experimental field results obtained during Phases II and III were compared to the theoretical results and to each other. Conclusions from this research are as follows: (1) Strengthening single-span composite bridges by post-tensioning is a viable, economical strengthening technique. (2) Behavior of both bridges was similar to the behavior observed from the bridges during field tests conducted under Phase II. (3) The strain transducers were very accurate at measuring mid-span strain. (4) The force transducers gave excellent results under laboratory conditions, but were found to be less effective when used in actual bridge tests. (5) Loss of post-tensioning force due to temperature effects in any particular steel beam post-tensioning tendon system were found to be small. (6) Loss of post-tensioning force over a two-year period was minimal. (7) Significant end restraint was measured in both bridges, caused primarily by reinforcing steel being continuous from the deck into the abutments. This end restraint reduced the effectiveness of the post-tensioning but also reduced midspan strains due to truck loadings. (8) The SAP IV finite element model is capable of accurately modeling the behavior of a post-tensioned bridge, if guardrails and end restraints are included in the model. (9) Post-tensioning distribution should be separated into distributions for the axial force and moment components of an eccentric post-tensioning force. (10) Skews of 45 deg or less have a minor influence on post-tensioning distribution. (11) For typical Iowa three-beam and four-beam composite bridges, simple regression-derived formulas for force and moment fractions can be used to estimate post-tensioning distribution at midspan. At other locations, a simple linear interpolation gives approximately correct results. (12) A simple analytical model can accurately estimate the flexural strength of an isolated post-tensioned composite beam.
Resumo:
The authors have post-tensioned and monitored two Iowa bridges and have field tested the post-tensioning of a composite bridge in Florida. In order to provide the practical post-tensioning distribution factors given in this manual, the authors developed a finite element model of a composite bridge and checked the model against a one-half scale laboratory bridge and two actual composite bridges, one of which had a 45 deg skew. Following a brief discussion of this background research, this manual explains the use of elastic, composite beam and bridge section properties, the distribution fractions for symmetrically post-tensioned exterior beams, and a method for computing the strength of a post-tensioned beam. Also included is a design example for a typical, 51.25-ft (15.62-m) span, four-beam composite bridge. Moments for Iowa Department of Transportation rating trucks, H 20 and HS 20 trucks, have been tabulated for design convenience and are included in the appendix.
Resumo:
BACKGROUND: Pegylated liposomal doxorubicin (PLD) and bevacizumab are active agents in the treatment of metastatic breast cancer (MBC). We carried out a multicenter, single-arm phase II trial to evaluate the toxicity and efficacy of PLD and bevacizumab as first-line treatment in MBC patients. METHODS: Bevacizumab (10 mg/kg) and PLD (20 mg/m(2)) were infused on days 1 and 15 of a 4-week cycle for a maximum of six cycles. Thereafter, bevacizumab monotherapy was continued at the same dose until progression or toxicity. The primary objective was safety and tolerability, and the secondary objective was to evaluate efficacy of the combination. RESULTS: Thirty-nine of 43 patients were assessable for the primary end point. Eighteen of 39 patients (46%, 95% confidence interval 30% to 63%) had a grade 3 toxicity. Sixteen (41%) had grade 3 palmar-plantar erythrodysesthesia, one had grade 3 mucositis, and one severe cardiotoxicity. Secondary end point of overall response rate among 43 assessable patients was 21%. CONCLUSIONS: In this nonrandomized single-arm trial, the combination of bimonthly PLD and bevacizumab in locally recurrent and MBC patients demonstrated higher than anticipated toxicity while exhibiting only modest activity. Based on these results, we would not consider this combination for further investigation in this setting.
Resumo:
Audit report of the State University of Iowa, Iowa City, Iowa, (University of Iowa) and its discretely presented component units as of and for the years ended June 30, 2013 and 2012
Resumo:
The knowledge of the relationship that links radiation dose and image quality is a prerequisite to any optimization of medical diagnostic radiology. Image quality depends, on the one hand, on the physical parameters such as contrast, resolution, and noise, and on the other hand, on characteristics of the observer that assesses the image. While the role of contrast and resolution is precisely defined and recognized, the influence of image noise is not yet fully understood. Its measurement is often based on imaging uniform test objects, even though real images contain anatomical backgrounds whose statistical nature is much different from test objects used to assess system noise. The goal of this study was to demonstrate the importance of variations in background anatomy by quantifying its effect on a series of detection tasks. Several types of mammographic backgrounds and signals were examined by psychophysical experiments in a two-alternative forced-choice detection task. According to hypotheses concerning the strategy used by the human observers, their signal to noise ratio was determined. This variable was also computed for a mathematical model based on the statistical decision theory. By comparing theoretical model and experimental results, the way that anatomical structure is perceived has been analyzed. Experiments showed that the observer's behavior was highly dependent upon both system noise and the anatomical background. The anatomy partly acts as a signal recognizable as such and partly as a pure noise that disturbs the detection process. This dual nature of the anatomy is quantified. It is shown that its effect varies according to its amplitude and the profile of the object being detected. The importance of the noisy part of the anatomy is, in some situations, much greater than the system noise. Hence, reducing the system noise by increasing the dose will not improve task performance. This observation indicates that the tradeoff between dose and image quality might be optimized by accepting a higher system noise. This could lead to a better resolution, more contrast, or less dose.