The Life of an Author: Samuel Egerton Brydges and the Copyright Act 1814

The history of literary copyright in nineteenth century Britain is dominated - understandably perhaps - by a preoccupation with the passing and impact of the Copyright Amendment Act 1842, so ably lobbied for by Sir Thomas Noon Talfourd. This article, however, draws attention away from the 1842 Act towards the Copyright Act 1814, the first legislative provision within British copyright law to introduce a lifetime term of protection for the author. Why and on what basis did the legislature do so?
In bringing a renewed attention to this often overlooked legislative measure, we consider the context and logic that underpinned to grant of a copyright term that was tethered to the life of the author. In doing so, we might also find a useful prism through which to look afresh at current copyright debates concerning the appropriate nature and scope of copyright protection in the 21st century.

A review of the welfare of dairy cows in continuously housed and pasture-based production systems.

There is increasing interest in the use of continuous housing systems for dairy cows, with various reasons put forward to advocate such systems. However, the welfare of dairy cows is typically perceived to be better within pasture-based systems, although such judgements are often not scientifically based. The aim of this review was to interrogate the existing scientific literature to compare the welfare, including health, of dairy cows in continuously housed and pasture-based systems. While summarising existing work, knowledge gaps and directions for future research are also identified. The scope of the review is broad, examining relevant topics under three main headings; health, behaviour, and physiology. Regarding health, cows on pasture-based systems had lower levels of lameness, hoof pathologies, hock lesions, mastitis, uterine disease, and mortality compared to cows on continuously housed systems. Pasture access also had benefits for dairy cow behaviour, in terms of grazing, improved lying / resting times, and lower levels of aggression. Moreover, when given the choice between pasture and indoor housing, cows showed an overall preference for pasture, particularly at night. However, the review highlighted the need for a deeper understanding of cow preference and behaviour. Potential areas for concern within pasture-based systems included physiological indicators of more severe negative energy balance, and in some situations, the potential for compromised welfare with exposure to unpredictable weather conditions. In summary, the results from this review highlight that there remain considerable animal welfare benefits from incorporating pasture access into dairy production systems.

Essential scientific mapping of the value chain of thermochemical converted second-generation bio-fuels

As the largest contributor to renewable energy, biomass (especially lignocellulosic biomass) has significant potential to address atmospheric emission and energy shortage issues. The bio-fuels derived from lignocellulosic biomass are popularly referred to as second-generation bio-fuels. To date, several thermochemical conversion pathways for the production of second-generation bio-fuels have shown commercial promise; however, most of these remain at various pre-commercial stages. In view of their imminent commercialization, it is important to conduct a profound and comprehensive comparison of these production techniques. Accordingly, the scope of this review is to fill this essential knowledge gap by mapping the entire value chain of second-generation bio-fuels, from technical, economic, and environmental perspectives. This value chain covers i) the thermochemical technologies used to convert solid biomass feedstock into easier-to-handle intermediates, such as bio-oil, syngas, methanol, and Fischer-Tropsch fuel; and ii) the upgrading technologies used to convert intermediates into end products, including diesel, gasoline, renewable jet fuels, hydrogen, char, olefins, and oxygenated compounds. This review also provides an economic and commercial assessment of these technologies, with the aim of identifying the most adaptable technology for the production of bio-fuels, fuel additives, and bio-chemicals. A detailed mapping of the carbon footprints of the various thermochemical routes to second-generation bio-fuels is also carried out. The review concludes by identifying key challenges and future trends for second-generation petroleum substitute bio-fuels.

Party rules, party resources and the politics of parliamentary democracies How parties organize in the 21st century

This article introduces the first findings of the Political Party Database Project, a major survey of party organizations in parliamentary and semi-presidential democracies. The project’s first round of data covers 122 parties in 19 countries. In this article, we describe the scope of the database, then investigate what it tells us about contemporary party organization in these countries, focusing on parties’ resources, structures and internal decision-making. We examine organizational patterns by country and party family, and where possible we make temporal comparisons with older data sets. Our analyses suggest a remarkable coexistence of uniformity and diversity. In terms of the major organizational resources on which parties can draw, such as members, staff and finance, the new evidence largely confirms the continuation of trends identified in previous research: that is, declining membership, but enhanced financial resources and more paid staff. We also find remarkable uniformity regarding the core architecture of party organizations. At the same time, however, we find substantial variation between countries and party families in terms of their internal processes, with particular regard to how internally democratic they are, and the forms that this democratization takes.

Implications of coping strategies and community cohesion for mental health in Colombia

In the face of mass human rights violations and constant threats to security, there is growing recognition of the resilience of people and communities. This paper builds on such work by investigating the effects of individual coping strategies, perceived community cohesion, and their interaction on mental health symptoms in Colombia. The study was conducted five years after the mass demobilisation of the former paramilitaries and takes an exploratory quantitative approach to identify two distinct forms of coping approaches among participants living in the Caribbean coast of Colombia. A constructive coping approach included active engagement, planning behaviours, emotional support, acceptance and positive reframing of daily stressors. A destructive coping approach in this study entailed denial of problems, substance use and behavioural disengagement from day-to-day stress. In addition, the strength of perceived community cohesion, or how close-knit and effective the individuals feel about the community in which they live, was examined. Structural equation modelling revealed that a constructive coping approach was significantly related to lower depression, while a destructive coping approach predicted more symptoms of depression. Although there was not a significant direct effect of perceived community cohesion on mental health outcomes, it did enhance the effect of constructive coping strategies at the trend level. That is, individuals who used constructive coping strategies and perceived their communities to be more cohesive, reported fewer depression symptoms than those who lived in less cohesive settings. Implications for promoting constructive coping strategies, as well as fostering cohesion in the community, are discussed.

Nucleophilic addition of Nitrones to Electron deficient acetylenes and related studies

Nitrones or azomethine-N-oxides are important precursors for the synthesis of several heterocyclic systems. They belong to the allyl anion type 1,3-dipoles and possess unique structural features which make them extraordinarily useful synthons. They behave as 1,3-dipoles in 1,3-dipolar cycloaddition reactions and as electrophiles in reactions with organometallic reagents. These are the two basic reactions given by nitrones. Nitrones also act as ‘spin traps’ in which they react with short-lived radicals to furnish stable nitroxide radicals which can be detected and identified by electron paramagnetic resonance (EPR) spectroscopy. Recently SmI2 catalysed reductive cross-coupling reactions of nitrones have gained significant interest in which the reactions are initiated by single electron transfer (SET) to nitrones. Apart from these reactions, nitrones are also known to participate in reactions which are initiated by the nucleophilic attack of nitrone-oxygen. In our group, we have also explored the nucleophilic character of nitrones through various reactions. The results obtained enabled us to develop a novel two-step one-pot strategy for quinolines and indoles - the heterocycles renowned for their pharmacological applications, from nitrones and electron deficient acetylenes. Using dibenzoylacetylene and phenylbenzoylacetylene as dipolarophiles, we could introduce a desired functional group at a predetermined position of the quinolines or indoles to be synthesised. In this context, the thesis entitled “NUCLEOPHILIC ADDITION OF NITRONES TO ELECTRON DEFICIENT ACETYLENES AND RELATED STUDIES” portrays our attempt to expand the scope of our x novel synthetic protocol using ester functionalised acetylenes: dimethyl acetylenedicarboxylate (DMAD) and methyl propiolate. The thesis is organised in to five chapters. The first chapter briefly describes the different classes of reactions that nitrone functionality can tolerate. The research problem is defined at the end of this chapter. The second chapter describes the synthesis of different nitrones used for the present study. The optimisation and expansion of scope of the novel strategy towards quinoline synthesis is discussed in the third chapter. The fourth chapter portrays the synthesis of indole-3-carboxylates using the novel strategy. In the fifth chapter, the reaction of N-(2,6-dimethylphenyl) and N-(2,4,6-trimethylphenyl)nitrones are discussed. Here we also discuss the mechanistic reinvestigation of Baldwin’s proposal in the isoxazoline-oxazoline rearrangement. The major outcome of the work is given at the end of the thesis. The structural formulae, schemes, tables and figures are numbered chapter-wise since each chapter of the thesis is organized as an independent unit. All new compounds (except two compounds reported in fourth chapter) are fully characterised on the basis of spectral and analytical data and single crystal X-ray analysis on representative examples. Relevant references are included at the end of individual chapters.

Policy for the Provision and Management of Cleaning Services (PDF 464KB)

This policy sets out the Department’s commitment to maintaining and improving environmental cleanliness in Northern Ireland (NI). It has been developed with the aim that best management practice, staff training and continued monitoring of performance will lead to services being maintained and improved in a challenging financial climate. The detail of the policy is presented in the three sections which follow this executive summary. Section 1 – Introduction and Background. This section sets out the aims, objectives and scope of the policy. It also sets out the key principles which should apply to cleaning services. Section 2 - Developments since the launch of Cleanliness Matters Strategy in October 2005. This outlines events and progress since 2005 and indicates how these are shaping the proposed strategic direction. Section 3 - The Way Forward. This section sets out the areas for attention over the coming years.  

Wearing Eye Tracking Technology During Batting Practice: Assessing the Experiences of Professional Baseball Athletes

Utilizing wearable technology in sport allows for the collection of motor behavior data during task engagement. This data can be assessed in real-time or retrospectively. Although enriching the scope of performance data, the consequences of wearable technology on the athlete-user, specifically the cognitive effects, has not been fully investigated, hence the purpose of this study. This qualitative study examines the cognitions of 57 professional baseball players who wore eye tracking technology whilst engaged in batting practice. Their verbal self-reports were framed by temporal context: before-during-after task. Three themes emerged during the pre-task segment: social appearance anxiety, claimed self-handicapping, and curiosity. During the task of batting, verbal behavior contained motivational and instructional overt self-talk while claimed self-handicapping was sustained. The final, post-performance segment was marked by the re-emergence of curiosity from the pre-task period as well as self-evaluation/appraisal. Given the participants were professional athletes, their performance has greater career implications than amateur competitors. Nonetheless, the verbal behavior elicited while wearing eye tracking technology indicates an awareness of the equipment by the user. This study found cognitive effects from wearable technology; more research is required to under-stand the scope and nature of those effects on cognitive and motor behaviors.

An Exploration of the Data Collection Methods Utilised with Children, Teenagers and Young People (CTYPs)

Background: The impact of cancer upon children, teenagers and young people can be profound. Research has been undertaken to explore the impacts upon children, teenagers and young people with cancer, but little is known about how researchers can ‘best’ engage with this group to explore their experiences. This review paper provides an overview of the utility of data collection methods employed when undertaking research with children, teenagers and young people. A systematic review of relevant databases was undertaken utilising the search terms ‘young people’, ‘young adult’, ‘adolescent’ and ‘data collection methods’. The full-text of the papers that were deemed eligible from the title and abstract were accessed and following discussion within the research team, thirty papers were included. Findings: Due to the heterogeneity in terms of the scope of the papers identified the following data collections methods were included in the results section. Three of the papers identified provided an overview of data collection methods utilised with this population and the remaining twenty seven papers covered the following data collection methods: Digital technologies; art based research; comparing the use of ‘paper and pencil’ research with web-based technologies, the use of games; the use of a specific communication tool; questionnaires and interviews; focus groups and telephone interviews/questionnaires. The strengths and limitations of the range of data collection methods included are discussed drawing upon such issues as of the appropriateness of particular methods for particular age groups, or the most appropriate method to employ when exploring a particularly sensitive topic area. Conclusions: There are a number of data collection methods utilised to undertaken research with children, teenagers and young adults. This review provides a summary of the current available evidence and an overview of the strengths and limitations of data collection methods employed.

Social media to support collaboration in the product life cycle of SMEs

Abstract : The use of social media tools to support small and medium-sized enterprises (SME) to support their business activities throughout the product life cycle (PLC) phases represents an interesting opportunity. SMEs operate in very competitive environments, and face significant challenges primarily caused by their size disadvantage. By nature, social media tools and platforms can enable them to overcome some of these challenges, as they are often very inexpensive, familiar and easy to use, allowing them to reach large audiences they would not be able to reach with traditional and expensive marketing initiatives. To provide solutions to this problem, this research identified three main objectives. The first objective was to draw a picture of the existing academic literature on the use of social media tools in the PLC context to better understand how these tools were studied and used in businesses, and for what purpose. Second, this research aimed at understanding how SMEs actually use social media tools to support their different business activities to identify the gap between academic research and actual business practices. Finally, based on the findings highlighted from the previous objectives, this research aimed at developing theory on this topic by proposing a conceptual framework of customer engagement enabled by social media. The conceptual framework aimed at answering general questions that emerged from the initial two objectives: Why do some SMEs use social media to support customer engagement, while others do not? Why do firms use different social media tools to support their customer engagement initiatives? Why does the scope of customer engagement initiatives (i.e., across different PLC phases) vary between SMEs? What are the potential outcomes of conducting customer engagement initiatives for the organizing firms? In order to achieve these research objectives, the methodology employed for this research is threefold. First, a systematic literature review was performed in order to properly understand how the use of social media tools in the PLC context had been studied. The final results consisted of 78 academic articles which were analyzed based on their bibliometric information and their content. Second, in order to draw the contrast between the academic publications and managerial reality of SMEs, six semi-structured interviews were conducted to understand how these firms actually use social media to support different activities in each of the PLC phases. Third, five additional semi-structured interviews were performed to gather a deeper understanding of this phenomenon and generate theory to support the proposed conceptual framework. The conceptual framework focuses on the degree of customer engagement, which is comprised of the scope (PLC phases) of customer engagement and the technology (social media tools) employed to support these initiatives. Two sets of antecedents were examined, firm motivators and firm impediments, as they could both potentially affect the scope and the social media tools used to support customer engagement initiatives. Finally, potential customer engagement outcomes for SMEs developing these initiatives were also examined. The semi-structured interviews lasted approximately 25-35 minutes, and were performed using an interview grid consisting of 24 open-ended questions. The interview grid was developed based on the findings of the systematic literature review, and this qualitative approach allowed for a rich understanding of the interviewed SMEs’ use of social media tools to support and engage customers in their different PLC activities. The main results highlighted by this project demonstrate that this field is relatively recent and sees constant increase in research interest since 2008. However, most of the academic research focuses on the use of social media tools to support innovation activities during the new product development process, while the interviewed firms almost exclusively used the tools to engage customers in the later phases of the PLC, primarily for promotion, customer service support, and business development activities. Interestingly, the interviewed firms highlighted several benefits of using social media tools to engage customers, some of which could help them overcome certain size disadvantages previously mentioned. These firms are in need of further guidelines to properly implement such initiatives and reap the expected benefits. Results suggest that SMEs are far behind both large companies and academic research in their use of social media to engage customers in different business activities. The proposed conceptual framework serves as a great tool to better understand their reality and eventually better support them in their social media and customer engagement efforts. However, this framework needs to be further developed and improved. This research project provides a 360-degree view of the phenomenon of the use of social media to support customer engagement for SMEs, by providing both a thorough systematic review of the academic research and an understanding of the managerial reality of SMEs behind this phenomenon. From this analysis, a conceptual framework is then proposed and serves as a stepping stone for future researchers who are interested in developing theory in this field.