Cultivo in vitro de Crambe abyssinica Hochst. : germinação, micropropagação, estabilidade genética e anatomia foliar

Crambe (Crambe abyssinica) pertence à família Brassicaceae, originário da Etiópia e principalmente destinado à produção de forragem (30 a 32% de proteína bruta). Atualmente, tem sido bastante cultivado visando à extração de óleo vegetal. Com os atuais incentivos à busca de fontes de energias renováveis, o cultivo de crambe vem ganhando papel de destaque na produção de biodiesel por suas diversas vantagens, como: (a) rápido ciclo de vida (colhida em torno de 90 dias); (b) alta produção de biomassa; (c) alta produtividade de sementes (1000 e 1500 kg ha-1); (d) menor custo de produção em relação a outras fontes oleaginosas, como, canola, girassol e soja; (e) um percentual de óleo total na semente entre 32 e 38%, superando, por exemplo, a soja; (f) potencial de fitorremediação, eficiente na descontaminação de arsênio, cromo e outros metais pesados; e (g) elevado percentual de ácido erúcico (50 a 60%) sendo útil na indústria de plástico e lubrificante. Devido aos poucos trabalhos realizados com crambe, abre-se um vasto campo de investigações científicas que tenham como objetivo desenvolver as potencialidades dessa cultura e, consequentemente, melhorar os aspectos agronômicos e tecnológicos para seu emprego na indústria de biodiesel. Nesse contexto, as técnicas de cultivo in vitro foram importantes tanto para a propagação massal, quanto como ferramenta para uma possível aplicação de outras técnicas biotecnológicas, contribuindo para uma produção homogênea, fiel e em larga escala. Portanto, este trabalho teve como objetivo geral avaliar as condições mais favoráveis à germinação, estabelecimento in vitro e micropropagação de Crambe abyssinica Hochst., além de verificar possíveis alterações genéticas e anatômicas, possibilitando a regeneração e produção de plântulas viáveis. Para a germinação e estabecimento in vitro de crambe, as condições mais favoráveis foram em meio B5 ou WPM, na presença ou ausência de pericarpo e na presença de luz. Na micropropagação dessa espécie, uma frequência satisfatória de regeneração de brotos foi obtida a partir de segmentos apicais utilizados como explante em meio contendo 5 μM de BAP (6- benzilaminopurina), e o alongamento foi satisfatório com 1 μM de GA3 (ácido giberélico). Os marcadores moleculares ISSR (Inter-Simples Sequence Repeats) utilizados para a análise da estabilidade genética indicaram que o segmento apical de crambe é um explante confiável para a micropropagação de plantas geneticamente verdadeiras (true-to-tipe), ou seja, mantém a estabilidade genética. As diversas fontes de citocininas e concentrações utilizadas neste trabalho não promoveram mudanças, no sentido de alterar a organização e/ou a espessura em relação ao controle, e as alterações observadas na estrutura e espessura das folhas dos tratamentos de aclimatização prejudicaram o processo de estabelecimento da plântula ex vitro. Contudo, existe a necessidade de um enraizamento e aclimatização eficiente para completa propagação in vitro de crambe. Portanto, este protocolo de regeneração de plantas in vitro de crambe pode ser útil no processo de criação e desenvolvimento de novas cultivares em um tempo mais curto e no melhoramento genético usando explantes apicais.

Estudo da Influencia de antioxidantes na avaliacao da estabilidade oxidativa de biodiesel pelo metodo petroOXY

O uso do biodiesel como um substituto total ou parcial do diesel de petróleo é significativo, entretanto a sua baixa estabilidade oxidativa é um ponto desfavorável. Portanto o uso de antioxidantes é viável desde que diminuam a velocidade de degradação promovido pela oxidação. Mas a ação de um antioxidante está relacionada com a composição química do biodiesel ao qual é adicionado. Considerando a importância e o crescimento da indústria de biodiesel, a necessidade de utilização de antioxidantes, e a busca por novas fontes como matérias primas, faz-se necessário estudar a eficiência de antioxidantes para o aumento da vida útil do biodiesel, além de avaliar novas culturas com potencial de produção como o pinhão manso (Jatropha curcas L.) e nabo forrageiro (Raphanus sativus L.). O objetivo deste trabalho foi avaliar os antioxidantes BHT (butilhidroxitolueno), PA (ácido pirogálico) e PG (galato de propila), em concentrações de 50, 200, 500, 1000 e 2000 mg/kg, nos biodiesel de pinhão manso, nabo forrageiro e soja, empregando a metodologia PetroOXY, ensaio acelerado de oxidação, para a determinação do seu período de indução. Os biodieseis foram obtidos através de reações de transesterificação, utilizando rota metílica, com rendimentos superiores a 80% e foram caracterizados através de alguns parâmetros físico-químicos. Foi observada a eficiência do uso de antioxidantes no aumento da vida útil do biodiesel. E com o aumento da concentração houve um aumento do período de indução. A eficiência do BHT foi sempre crescente com o aumento da concentração para todos os biodieseis enquanto que para o PG e PA houve uma diminuição da eficiência na maior concentração. A metodologia usada para avaliação da estabilidade oxidativa, PetroOXY, mostrou-se eficaz, de boa repetibilidade e reprodutibilidade, além de ser mais rápida e completa que o método Rancimat. Na concentração mais elevada, 2000 mg/kg, o melhor desempenho foi para o BHT, nas concentrações inferiores a 2000 mg/kg, a melhor eficiência foi para o PA ~ PG, nos três biodieseis estudados, soja, nabo forrageiro e pinhão manso.

Bioactive albumin functionalized polylactic acid membranes for improved biocompatibility

Biocompatibility is a major challenge for successful application of many biomaterials. In this study the ability to coat chemically and enzymatically activated poly(L-lactic acid) (PLA) membranes with heat denatured human serum albumin to improve biocompatibility was investigated. PLA membranes hydrolyzed with NaOH or cutinase and then treated with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide, hydrochloride (EDAC) as a heterobifunctional cross-linker promoted the coupling single bondCOOH groups on PLA membranes and single bondNH2 groups of heat denatured human serum albumin. This resulted in increased hydrophilicity (lowest water contact angles of 43° and 35°) and highest antioxidant activity (quenching of 79 μM and 115 μM tetramethylazobisquinone (TMAMQ) for NaOH and cutinase pretreated membranes, respectively). FTIR analysis of modified PLA membranes showed new peaks attributed to human serum albumin (amide bond, NH2 and side chain stretching) appearing within 3600–3000 cm−1 and 1700–1500 cm−1 (Fig. 3). MTT studies also showed that osteoblasts-like and MC-3T3-E1 cells viability increased 2.4 times as compared to untreated PLA membranes. The study therefore shows that this strategy of modifying the surfaces of PLA polymers could significantly improve biocompatibility.

Maize nitrogen fertilization in two crop rotation systems under no-till

The objective of this study was to evaluate split nitrogen (N) fertilization of maize applied in band at sowing and top dressing with and without crop rotation, under no-till. The experiment was conducted with six N rates at sowing (0, 20, 30, 40, 50 and 60 kg ha-1) combined with three rates in top dressing (40, 70, 100 kg ha-1) and two management systems: after five cropping sequences of maize and crop rotation (maize + soybean + oat + soybean + corn) in a randomized block design with four replications. The crop rotation system increased yield in approximately 7% in relation to the area without rotation. The split of nitrogen fertilization, in rates above 39 and 54 kg ha-1 at sowing and 70 and 40 kg ha-1 in top dressing, resulted in yield higher than that obtained with the application of 100 kg ha-1 in top dressing. Grain yield was higher with the rates 50 and 70 kg ha-1 of N compared with that obtained with 20 and 100 kg ha-1 at sowing and top dressing, respectively. The rate 70 kg ha-1 of N resulted in the highest yield at the lowest cost compared with the revenues and costs incurred with the rates 40 and 100 kg ha-1.

Kinetics of solute leachate from imbibing Caesalpinia echinata Lam. (Brazilwood) seeds

The electrical conductivity of leachates from imbibing seeds has been used as a vigor test for several species. The adaptation of this methodology to different species requires knowledge on the leaching kinetics of electrolytes. For Brazilwood seeds, the classic method was not satisfactory and rapid tests are essential because they have low storage capacity at room temperature. Leaching kinetics during seed imbibition is a function of physiological quality, presence or absence of seed coat, imbibing temperature and the initial moisture content of seed. In this study, the electrolyte leaching rate of six different categories of seeds, from two regions, was evaluated in seeds with and without seed coat and incubated with different moisture contents and at different temperatures. The results showed that the electrolyte leaching rate in Brazilwood seeds is independent of the physiological quality, the presence or absence of seed coat and imbibition temperature, but these factors changed the total amount of electrolytes leached. The leaching rate increased in the first few minutes of imbibition, suggesting that the adjustment of the methodology must consider the reduction in imbibition time, reduction in temperature, use of a controlled and slower pre-imbibition, and replacement of the imbibition solution after the first few minutes.

Silicon in plant disease control

All essential nutrients can affect the incidence and severity of plant diseases. Although silicon (Si) is not considered as an essential nutrient for plants, it stands out for its potential to decrease disease intensity in many crops. The mechanism of Si action in plant resistance is still unclear. Si deposition in plant cell walls raised the hypothesis of a possible physical barrier to pathogen penetration. However, the increased activity of phenolic compounds, polyphenol oxidases and peroxidases in plants treated with Si demonstrates the involvement of this element in the induction of plant defense responses. The studies examined in this review address the role of Si in disease control and the possible mechanisms involved in the mode of Si action in disease resistance in plants.

Crescimento de crambe na presença ou ausência de competição interespecífica

RESUMOCrambe (Crambe abyssinica) has a cropping cycle of around 90 days, being suitable as an alternative to the second grain crop planted after soybean is harvested in the Center West region of Brazil. It is necessary to understand the growth and development dynamics of crambe plants in order to allow correct management of the production factors. This study aimed to describe the growth and development parameters of crambe plants under presence or absence of interspecific competition. The experiment was installed in the fall-winter 2011 in an Oxisoil, in completely randomized blocks design with three replications. Treatments comprised crambe plants growing either in presence or absence of interspecific simulated competition, throughout the cropping cycle. Plants were collected for the growth analysis every 15 days from harvest until 75 days after emergence. Growth parameters leaf area (AF), dry mass of stems/culms (MSC), leaves (MSF) and total (MST) dry mass, leaf area index (IAF), absolute (TCA) and relative (TCR) growth rates, net assimilation rate (TAL), specific leaf area (AFE), leaf area duration (DAF), leaf area ratio (RAF) and leaf mass ratio (RMF) were determined for the crop plants, subjected or not to competition, as well as for the simulated competitor. Crambe is a low competitive crop, being the competition more severe until 60-70 days after emergence. Besides, crop performance under field conditions was properly described by the net assimilation rate (TAL), which is also affected by the leaf area duration (DAF) and leaf mass ratio (RMF).

Gradual correction of phosphorus availability in the no-tillage system

ABSTRACT In areas cultivated under no-tillage system, the availability of phosphorus (P) can be raised by means of the gradual corrective fertilization, applying phosphorus into sowing furrows at doses higher than those required by the crops. The objective of this work was to establish the amount of P to be applied in soybean crop to increase content of P to pre-established values at the depth of 0.0 to 0.10 m. An experiment was carried out on a clayey Haplorthox soil with a randomized block experimental design distributed in split-split plot, with four replications. Two soybean crop systems (single or intercropped with Panicum maximum Jaca cv. Aruana) were evaluated in the plots. In addition, it was evaluated four P levels (0, 60, 120 and 180 kg ha-1 P2O5) applied in the first year in the split plots; and four P levels (0, 30, 60 and 90 kg ha-1 P2O5) applied in the two subsequent crops in the split-split plot. Contents of P were extracted by Mehlich-1 and Anion Exchange Resin methods from soil samples collected in the split-split plot. It was found that it is necessary to apply 19.4 or 11.1 kg ha-1 of P2O5, via triple superphosphate as source, to increase 1 mg dm-3 of P extracted by Mehlich-1 or Resin, respectively, in the 0.0 to 0.10 m layer of depth. The soil drain P character decreases as the amount of this nutrient supplied in the previous crops is increased.

KrF pulsed laser deposition of chromium oxide thin films from Cr8O21 targets

Chromium oxides, CrxOy, are of great interest due to the wide variety of their technological applications. Among them, CrO2 has been extensively investigated in recent years because it is an attractive compound for use in spintronic heterostructures. However, its synthesis at low temperatures has been a difficult task due to the metastable nature of this oxide. This is indeed essential to ensure interface quality and the ability to coat thermal-sensitive materials such as those envisaged in spintronic devices. Pulsed Laser Deposition (PLD) is a technique that has the potential to meet the requirements stated above. In this work, we describe our efforts to grow chromium oxide thin films by PLD from Cr8O21 targets, using a KrF excimer laser. The as-deposited films were investigated by X-ray diffraction and Rutherford backscattering spectrometry. Structural and chemical composition studies showed that the films consist of a mixture of amorphous chromium oxides exhibiting different stoichiometries depending on the processing parameters, where nanocrystals of mainly Cr2O3 are dispersed. The analyses do not exclude the possibility of co-deposition of Cr2O3 and a low fraction of CrO2.