Open Access and Research Conference 2013: Discovery, Impact and Innovation (Event report)

Event report on the Open Access and Research 2013 conference which focused on recent developments and the strategic advantages they bring to the research sector.

The reduced expression of the HADH2 protein causes X-linked mental retardation, choreoathetosis, and abnormal behavior

Recently, we defined a new syndromic form of X-linked mental retardation in a 4-generation family with a unique clinical phenotype characterized by mild mental retardation, choreoathetosis, and abnormal behavior (MRXS10). Linkage analysis in this family revealed a candidate region of 13.4 Mb between markers DXS1201 and DXS991 on Xp11; therefore, mutation analysis was performed by direct sequencing in most of the 135 annotated genes located in the region. The gene (HADH2) encoding L-3-hydroxyacyl-CoA dehydrogenase II displayed a sequence alteration (c.574 C-->A; p.R192R) in all patients and carrier females that was absent in unaffected male family members and could not be found in 2,500 control X chromosomes, including in those of 500 healthy males. The silent C-->A substitution is located in exon 5 and was shown by western blot to reduce the amount of HADH2 protein by 60%-70% in the patient. Quantitative in vivo and in vitro expression studies revealed a ratio of splicing transcript amounts different from those normally seen in controls. Apparently, the reduced expression of the wild-type fragment, which results in the decreased protein expression, rather than the increased amount of aberrant splicing fragments of the HADH2 gene, is pathogenic. Our data therefore strongly suggest that reduced expression of the HADH2 protein causes MRXS10, a phenotype different from that caused by 2-methyl-3-hydroxybutyryl-CoA dehydrogenase deficiency, which is a neurodegenerative disorder caused by missense mutations in this multifunctional protein.

Palliative care provision for patients with a haematological malignancy : can we do more?

This editorial depicts the current challenges in palliative care provision for patients with a haematological malignancy and the contribution of cancer nurses. There have been significant advancements in the care of patients with a hematological malignancy over the past three or more decades1. Despite this, there still exists a significant mortality risk in curative treatment and many patients with a hematological malignancy will die from their disease1. A growing body of research indicates patients with a hematological malignancy do not receive best practice palliative and end-of-life care2. Shortfalls in care include poor referral patterns to specialist palliative care services, lack of honest discussions regarding death and dying, inadequate spiritual care for patients and families, patients frequently dying in the acute care setting and high levels of patient and family distress2. There have been a number of efforts in the United Kingdom, United States of America, Sweden, and Australia demonstrating palliative and hematology care can co-exist, exemplified through clinical case studies and innovative models of care2. However, deficits in the provision of palliative care for patients with a hematological malignancy persist as evident in the international literature2. Addressing this issue requires research exploring new aspects of a complex scenario; here we suggest priority areas of research...

Strain variation amongst clinical and potable water isolates of M.kansasii using automated repetitive unit PCR

Mycobacterium kansasii is a pulmonary pathogen that has been grown readily from municipal water, but rarely isolated from natural waters. A definitive link between water exposure and disease has not been demonstrated and the environmental niche for this organism is poorly understood. Strain typing of clinical isolates has revealed seven subtypes with Type 1 being highly clonal and responsible for most infections worldwide. The prevalence of other subtypes varies geographically. In this study 49 water isolates are compared with 72 patient isolates from the same geographical area (Brisbane, Australia), using automated repetitive unit PCR (Diversilab) and ITS RFLP. The clonality of the dominant clinical strain type is again demonstrated but with rep-PCR, strain variation within this group is evident comparable with other reported methods. There is significant heterogeneity of water isolates and very few are similar or related to the clinical isolates. This suggests that if water or aerosol transmission is the mode of infection, then point source contamination likely occurs from an alternative environmental source.

The role of the market sub-system and the socio-technical sub-system in innovation and firm performance : a dynamic capabilities approach

Organizational learning has been studied as a key factor in firm performance and internationalization. Moving beyond the past emphasis on market learning, we develop a more complete explanation of learning, its relationship to innovation, and their joint effect on early internationalization. We theorize that, driven by the founders’ international vision, early internationalizing firms employ a dual subsystem of dynamic capabilities: a market subsystem consisting of market-focused learning capability and marketing capability, and a socio-technical subsystem comprised of network learning capability and internally focused learning capability. We argue that innovation mediates the proposed relationship between the dynamic capability structure and early internationalization. We conduct case studies to develop the conceptual framework and test it in a field survey of early internationalizing firms from Australia and the United States. Our findings indicate a complex interplay of capabilities driving innovation and early internationalization. We provide theoretical and practical implications and offer insights for future research.

Vocational education in science technology, engineering and maths (STEM) : Curriculum innovation through industry school partnerships

Governments have recognised that the technological trades rely on knowledge embedded traditionally in science, technology, engineering and mathematics (STEM) disciplines. In this paper, we report preliminary findings on the development of two curricula that attempt to integrate science and mathematics with workplace knowledge and practices. We argue that these curricula provide educational opportunities for students to pursue their preferred career pathways. These curricula were co-developed by industry and educational personnel across two industry sectors, namely, mining and aerospace. The aim was to provide knowledge appropriate for students moving from school to the workplace in the respective industries. The analysis of curriculum and associated policy documents reveals that the curricula adopt applied learning orientations through teaching strategies and assessment practices which focus on practical skills. However, although key theoretical science and maths concepts have been well incorporated, the extent to which knowledge deriving from workplace practices is included varies across the curricula. Our findings highlight the importance of teachers having substantial practical industry experience and the role that whole school policies play in attempts to align the range of learning experiences with the needs of industry.

Does withdrawing life-sustaining treatment cause death or allow the patient to die?

The paper discusses the view of Franklin Miller and Robert Truog that withdrawing life-sustaining treatment causes death and so is a form of killing. I reject that view. I argue that even if we think there is no morally relevant difference between allowing a patient to die and killing her (itself a controversial view), it does not follow that allowing to die is a form of killing. I then argue that withdrawing life-sustaining treatment is properly classified as allowing the patient to die rather than as killing her. Once this is accepted, the law cannot be criticised for inconsistency by holding, as it does, that it is lawful to withdraw life-sustaining treatment but unlawful to give patients a lethal injection.

Sustaining social innovation enterprises through a design led innovation framework

Constant changes in the global economic environment require companies to revisit traditional assumptions about how businesses create and capture value (Teece, 2010). In recent years, management practice literature has focused largely on better understanding business models and business model innovation (Amit, Zott and Massa, 2010; Johnson, Christensen and Kagermann, 2008). Much has been written on the benefits of linking design and design thinking to organisational strategies and business transformation. However, very little has been researched and reported on regarding the impact of design led approaches to triple bottom-line opportunities such as, social innovation enterprise. In the context of this paper Design Led Innovation is defined as the tools and approaches which enable design thinking to be embedded as an element of cultural transformation within a business. Being Design Led requires a company to have a vision for top line growth founded on deep customer insights and expanded through customer and stakeholder engagements. The outcomes of this are then mapped to all aspects of the business, enabling the vision to be successfully implemented and achieved. It is the latter part of this definition where we believe Design Led Innovation has the greatest value in transforming social innovation enterprise into a sustainable business venture. However, we also acknowledge that enabling these firms to think strategically about their business model is difficult given the unique operational and funding challenges that often characterize many social enterprises. The purpose of this paper, therefore, is to pose the question, do sustainable innovation enterprise innovate their business model? And if so, how? It is the authors’ opinion that such enterprises only innovate at the product or system level without a complete understanding of the business model structure, which underpins the long term viability. However, in this paper we challenge this notion and explore if such firms can overcome their size and operational constraints to become sustainable enterprises using a design led approach. This is achieved through contextualizing business model innovation, briefly defining social innovation enterprise and profiling a new and emerging industry in Australia – Clean Technology. Future research challenges and opportunities are also presented.

Can ginger ameliorate chemotherapy-induced nausea? Protocol of a randomized double blind, placebo-controlled trial

Background Preliminary research shows ginger may be an effective adjuvant treatment for chemotherapy-induced nausea and vomiting but significant limitations need to be addressed before recommendations for clinical practice can be made. Methods/Design In a double–blinded randomised-controlled trial, chemotherapy-naïve patients will be randomly allocated to receive either 1.2 g of a standardised ginger extract or placebo per day. The study medication will be administrated as an adjuvant treatment to standard anti-emetic therapy and will be divided into four capsules per day, to be consumed approximately every 4 hours (300 mg per capsule administered q.i.d) for five days during the first three cycles of chemotherapy. Acute, delayed, and anticipatory symptoms of nausea and vomiting will be assessed over this time frame using a valid and reliable questionnaire, with nausea symptoms being the primary outcome. Quality of life, nutritional status, adverse effects, patient adherence, cancer-related fatigue, and CINV-specific prognostic factors will also be assessed. Discussion Previous trials in this area have noted limitations. These include the inconsistent use of standardized ginger formulations and valid questionnaires, lack of control for anticipatory nausea and prognostic factors that may influence individual CINV response, and the use of suboptimal dosing regimens. This trial is the first to address these issues by incorporating multiple unique additions to the study design including controlling for CINV-specific prognostic factors by recruiting only chemotherapy-naïve patients, implementing a dosing schedule consistent with the pharmacokinetics of oral ginger supplements, and independently analysing ginger supplements before and after recruitment to ensure potency. Our trial will also be the first to assess the effect of ginger supplementation on cancer-related fatigue and nutritional status. Chemotherapy-induced nausea and vomiting are distressing symptoms experienced by oncology patients; this trial will address the significant limitations within the current literature and in doing so, will investigate the effect of ginger supplementation as an adjuvant treatment in modulating nausea and vomiting symptoms. Trial registration

A comparison of patient matched meibum and tear lipidomes

Purpose. To quantify the molecular lipid composition of patient-matched tear and meibum samples and compare tear and meibum lipid molecular profiles. Methods. Lipids were extracted from tears and meibum by bi-phasic methods using 10:3 tertbutyl methyl ether:methanol, washed with aqueous ammonium acetate, and analyzed by chipbased nanoelectrospray ionization tandem mass spectrometry. Targeted precursor ion and neutral loss scans identified individual molecular lipids and quantification was obtained by comparison to internal standards in each lipid class. Results. Two hundred and thirty-six lipid species were identified and quantified from nine lipid classes comprised of cholesterol esters, wax esters, (O-acyl)-x-hydroxy fatty acids, triacylglycerols, phosphatidylcholine, lysophosphatidylcholine, phosphatidylethanolamine, sphingomyelin, and phosphatidylserine. With the exception of phospholipids, lipid molecular profiles were strikingly similar between tears and meibum. Conclusions. Comparisons between tears and meibum indicate that meibum is likely to supply the majority of lipids in the tear film lipid layer. However, the observed higher mole ratio of phospholipid in tears shows that analysis of meibum alone does not provide a complete understanding of the tear film lipid composition.

Increasing incidence of Clostridium difficile infection, Australia, 2011–2012

Objectives: To report the quarterly incidence of hospital-identified Clostridium difficile infection (HI-CDI) in Australia, and to estimate the burden ascribed to hospital-associated (HA) and community-associated (CA) infections. Design, setting and patients: Prospective surveillance of all cases of CDI diagnosed in hospital patients from 1 January 2011 to 31 December 2012 in 450 public hospitals in all Australian states and the Australian Capital Territory. All patients admitted to inpatient wards or units in acute public hospitals, including psychiatry, rehabilitation and aged care, were included, as well as those attending emergency departments and outpatient clinics. Main outcome measures: Incidence of HI-CDI (primary outcome); proportion and incidence of HA-CDI and CA-CDI (secondary outcomes). Results: The annual incidence of HI-CDI increased from 3.25/10 000 patient-days (PD) in 2011 to 4.03/10 000 PD in 2012. Poisson regression modelling demonstrated a 29% increase (95% CI, 25% to 34%) per quarter between April and December 2011, with a peak of 4.49/10 000 PD in the October–December quarter. The incidence plateaued in January–March 2012 and then declined by 8% (95% CI, − 11% to − 5%) per quarter to 3.76/10 000 PD in July–September 2012, after which the rate rose again by 11% (95% CI, 4% to 19%) per quarter to 4.09/10 000 PD in October–December 2012. Trends were similar for HA-CDI and CA-CDI. A subgroup analysis determined that 26% of cases were CA-CDI. Conclusions: A significant increase in both HA-CDI and CA-CDI identified through hospital surveillance occurred in Australia during 2011–2012. Studies are required to further characterise the epidemiology of CDI in Australia.

Epidemiology of Clostridium difficile infection (CDI) in Queensland, Australia

Background: International epidemic clones (ribotypes 027 and 078) of Clostridium difficile have been associated with death, toxic megacolon and other adverse outcomes in North America and Europe. In 2010, the first local transmission of an epidemic strain (027) of C. difficile was reported in the state of Victoria, Australia, but no cases of infection with this strain were reported in the state of Queensland. In 2012, a prevalence study was undertaken in all public and selected private hospitals to examine the epidemiology of CDI and determine the prevalence of epidemic C. difficile strains in Queensland. Methods: Enhanced surveillance was undertaken on all hospital identified CDI cases aged over 2 years between 10 April and 15 June 2012. Where available, patient samples were cultured and isolates of C. difficile ribotyped. The toxin profile of each isolate was determined by PCR. Results: In total, 168 cases of CDI were identified during the study period. A majority (58.3%) of cases had onset of symptoms in hospital. Of the 62 patients with community onset of symptoms, most (74%) had a hospital admission in the previous 3 months. Only 4 of 168 patients had onset of symptoms within a residential care facility. Thirteen out of the 168 (7.7%) patients included in the study had severe disease (ICU admission and/or death within 30 days of onset). Overall 136/168 (81%) of cases had been prescribed antibiotics in the last month. Of concern was the emergence of a novel ribotype (244) which has recently been described in other parts of Australia and is genetically related to ribotype 027. Seven patients were infected with C. difficile ribotype 244 (8% of 83 samples ribotyped), including one patient requiring ICU admission and one patient who died. Ribotype 244 was tcdA, tcdB and CDT positive and contained a tcdC mutation at position 117. Conclusion: Ongoing surveillance is required to determine the origin and epidemiology of C. difficile ribotype 244 infections in Australia.

Turning points in narratives of research design : research innovation stimulating unique responses to existing challenges for beginning rural teachers

This paper explores methodological turning points in researching narratives of early career resilience mediated by the complexities of remote teaching. Innovative, flexible and discursive research design facilitated exploration of emerging narratives using digital technologies. Data were regularly interrogated with participant-researchers to reveal the undercurrents of imbued meaning. Dialogue with participant-researchers enhanced interpretations of data plots and text-based explanations of narrative turning points, providing valuable insights throughout analysis. Reflections on the affordances and tensions in this process illustrate the significance of innovation but also the complexities associated with online collaboration. Consequently, empowering the participant-researchers throughout the life of the research was critical in understanding their narratives of teaching.

Use of genetically modified muscle and fat grafts to repair defects in bone and cartilage

We report a novel technology for the rapid healing of large osseous and chondral defects, based upon the genetic modification of autologous skeletal muscle and fat grafts. These tissues were selected because they not only possess mesenchymal progenitor cells and scaffolding properties, but also can be biopsied, genetically modified and returned to the patient in a single operative session. First generation adenovirus vector carrying cDNA encoding human bone morphogenetic protein-2 (Ad.BMP-2) was used for gene transfer to biopsies of muscle and fat. To assess bone healing, the genetically modified (“gene activated”) tissues were implanted into 5mm-long critical size, mid-diaphyseal, stabilized defects in the femora of Fischer rats. Unlike control defects, those receiving gene-activated muscle underwent rapid healing, with evidence of radiologic bridging as early as 10 days after implantation and restoration of full mechanical strength by 8 weeks. Histologic analysis suggests that the grafts rapidly differentiated into cartilage, followed by efficient endochondral ossification. Fluorescence in situ hybridization detection of Y-chromosomes following the transfer of male donor muscle into female rats demonstrated that at least some of the osteoblasts of the healed bone were derived from donor muscle. Gene activated fat also healed critical sized defects, but less quickly than muscle and with more variability. Anti-adenovirus antibodies were not detected. Pilot studies in a rabbit osteochondral defect model demonstrated the promise of this technology for healing cartilage defects. Further development of these methods should provide ways to heal bone and cartilage more expeditiously, and at lower cost, than is presently possible.

Retooling Chinese primary school teachers to use technology creatively to promote innovation and problem solving skills in science classrooms

This paper reports on the initial phase of a Professional Learning Program (PLP) undertaken by 100 primary school teachers in China that aimed to facilitate the development of adaptive expertise in using technology to facilitate innovative science teaching and learning such as that envisaged by the Chinese Ministry of Education’s (2010-2020) education reforms. Key principles derived from literature about professional learning and scaffolding of learning informed the design of the PLP. The analysis of data revealed that the participants had made substantial progress towards the development of adaptive expertise. This was manifested not only by advances in the participants’ repertoires of Subject Matter Knowledge and Pedagogical Content Knowledge but also in changes to their levels of confidence and identities as teachers. By the end of the initial phase of the PLP, the participants had coalesced into a professional learning community that readily engaged in the sharing, peer review, reuse and adaption, and collaborative design of innovative science learning and assessment activities. The findings from the study indicate that those engaged in the development of PLPs for teachers in China need to take cognizance of certain cultural factors and traditions idiosyncratic to the Chinese educational system. A set of revised principles is then presented to inform the future design and implementation of PLPs for teachers in China.