Microencapsulation of tuna oil fortified with the multiple lipophilic ingredients vitamins A, D3, E, K2, curcumin and coenzyme Q10

Complex coacervates of gelatin and sodium hexametaphosphate (SHMP) was used to microencapsulate tuna oil fortified with the multiple functional lipophilic ingredients, vitamin A, D3, E, K2, curcumin and coenzyme Q10. An emulsion homogenization speed of 15,000 rpm for 15 min resulted in low surface oil content (0.08%), high encapsulation efficacy (99.84%) and encapsulation yield (96.59%), with a significantly enhanced oxidative stability index (6.23 h). The Fourier transform infrared spectra showed that there was no observable oxidation of the oil during microencapsulation. This study shows that microencapsulation using complex coacervation is suitable for stabilizing multiple bioactive lipophilic ingredients.

Using otolith microchemistry and shape to assess the habitat value of oil structures for reef fish

Over 7500 oil and gas structures (e.g. oil platforms) are installed in offshore waters worldwide and many will require decommissioning within the next two decades. The decision to remove such structures or turn them into reefs (i.e. 'rigs-to-reefs') hinges on the habitat value they provide, yet this can rarely be determined because the residency of mobile species is difficult to establish. Here, we test a novel solution to this problem for reef fishes; the use of otolith (earstone) properties to identify oil structures of residence. We compare the otolith microchemistry and otolith shape of a site-attached coral reef fish (Pseudanthias rubrizonatus) among four oil structures (depth 82-135 m, separated by 9.7-84.2 km) on Australia's North West Shelf to determine if populations developed distinct otolith properties during their residency. Microchemical signatures obtained from the otolith edge using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) differed among oil structures, driven by elements Sr, Ba and Mn, and to a lesser extent Mg and Fe. A combination of microchemical data from the otolith edge and elliptical Fourier (shape) descriptors allowed allocation of individuals to their 'home' structure with moderate accuracy (overall allocation accuracy: 63.3%, range: 45.5-78.1%), despite lower allocation accuracies for each otolith property in isolation (microchemistry: 47.5%, otolith shape: 45%). Site-specific microchemical signatures were also stable enough through time to distinguish populations during 3 separate time periods, suggesting that residence histories could be recreated by targeting previous growth zones in the otolith. Our results indicate that reef fish can develop unique otolith properties during their residency on oil structures which may be useful for assessing the habitat value of individual structures. The approach outlined here may also be useful for determining the residency of reef fish on artificial reefs, which would assist productivity assessments of these habitats.

A computational search for lipases that can preferentially hydrolyze long-chain omega-3 fatty acids from fish oil triacylglycerols

Consumption of long-chain omega-3 fatty acids is known to decrease the risk of major cardiovascular events. Lipases, a class of triacylglycerol hydrolases, have been extensively tested to concentrate omega-3 fatty acids from fish oils, under mild enzymatic conditions. However, no lipases with preference for omega-3 fatty acids selectivity have yet been discovered or developed. In this study we performed an exhaustive computational study of substrate-lipase interactions by docking, both covalent and non-covalent, for 38 lipases with a large number of structured triacylglycerols containing omega-3 fatty acids. We identified some lipases that have potential to preferentially hydrolyze omega-3 fatty acids from structured triacylglycerols. However omega-3 fatty acid preferences were found to be modest. Our study provides an explanation for absence of reports of lipases with omega-3 fatty acid hydrolyzing ability and suggests methods for developing these selective lipases.

Fabrication of superhydrophobic surfaces by smoke deposition and application in oil-water separation

 Utilizing the smoke emitted by discarded silicone combustion, a simple method of smoke deposition is presented for fabricating a superhydrophobic surface with outstanding water repellence, which exhibited a water contact angle of 164 ± 0.8° and a sliding angle of lower than 1°. In addition, the as-prepared surface possesses favourable heat, water impact and water immersion stabilities. Oil leakages seriously endanger both the environment and the social economy. By this simple smoke deposition method, a selective-wettability copper mesh has been fabricated to separate oil-water mixtures. The smoke-deposited mesh achieved a high separation efficiency of over 93% for various oils, and showed excellent reusability, maintaining a high separation efficiency over 10 cycles. The water repellence of the used mesh can be refreshed by recoating with silicone and smoke deposition. This work provides a new strategy to utilize discarded silicone to fabricate superhydrophobic surfaces and oil-water separation meshes.

Lipid profiles, in vitro digestion and oxidative stability of mutton bird oil

The lipid profile, in vitro digestion and oxidative stability of mutton bird oil were investigated. Wax ester, triacylglycerol and sterol were the major lipids present as determined using capillary chromatography with flame ionisation detector (Iatroscan). Fatty acid analysis by gas chromatography (GC) showed that wax esters had a higher total omega-3 fatty acids content including EPA, DPA and DHA than TAGs (31 % and 24 %, respectively). In TAGs, 13C nuclear magnetic resonance (NMR) data showed that EPA was statistically positioned at sn-1,3 and sn-2, while DHA was preferentially at sn-2. In vitro digestion using porcine pancreatic lipase resulted in 75 % of TAG and 10 % wax ester hydrolysis in 120 min. As reflected in the measured conjugated dienes (CD) and thiobarbituric acid reactive substances (TBARS) values during accelerated oxidation at 60 °C for 5 days, the oil was relatively stable against oxidation considering its high omega-3 content.

Marginal efficiencies of long chain-polyunsaturated fatty acid use by barramundi (Lates calcarifer) when fed diets with varying blends of fish oil and poultry fat

An experiment was conducted with barramundi (Lates calcarifer) juveniles to examine the marginal efficiency of utilisation of long chain-polyunsaturated fatty acids (LC-PUFA). A series of five diets with blends of fish (anchovy) oil and poultry fat (F100:P0, F60:P40, F30:P70, F15:P85, F0:P100) were fed to 208. ±. 4.1. g fish over a 12-week period. The replacement of fish oil with poultry fat had no impact on growth performance (average final weight of 548.3. ±. 10.2. g) or feed conversion (mean = 1.14. ±. 0.02). Analysis of the whole body composition showed that the fatty acid profile reflected that of the fed diet. However it was also shown that there was a disproportional retention of some fatty acids relative to others (notably LOA, 18:2n-6 and LNA, 18:3n-3). By examining the body mass independent retention of different fatty acids with differential levels of intake of each, the marginal efficiencies of the use of these nutrients by this species were able to be determined. The differential retention of fatty acids in the meat was also examined allowing the determination of oil blending strategies to optimise meat n-3 LC-PUFA levels.

Bead milling for lipid recovery from thraustochytrid cells and selective hydrolysis of Schizochytrium DT3 oil using lipase

Marine microalgae present a renewable alternative source for sustainable production of omega-3 fatty acids, as compared to conventional sources such as krill oil and fish oil. In this study, we optimised a method for lipid extraction from marine thraustochytrids using a bead mill and enzymatic concentration of omega-3 fatty acids from the thraustochytrid oil. The optimised lipid extraction conditions were, bead size 0.4-0.6μm, 4500rpm, 4min of processing time at 5g biomass concentration. The maximum lipid yield (% dry weight basis) achieved at optimum conditions were 40.5% for Schizochytrium sp. S31 (ATCC) and 49.4% for Schizochytrium sp. DT3 (in-house isolate). DT3 oil contained 39.8% docosahexaenoic acid (DHA) as a percentage of lipid, a higher DHA percentage than S31. Partial hydrolysis of DT3 oil using Candida rugosa lipase was performed to enrich omega-3 polyunsaturated fatty acids (PUFAs) in the glyceride portion. Total omega-3 fatty acid content was increased to 88.7%.

An anti-biodegradable hydrophobic sulfonate-based acrylamide copolymer containing 2,4-dichlorophenoxy for enhanced oil recovery

We report here a novel anti-biodegradable hydrophobic acrylamide copolymer that was prepared from acrylamide, acrylic acid, sodium 3-(allyloxy)-2-hydroxypropane-1-sulfonate and N-allyl-2-(2,4-dichlorophenoxy) acetamide using the 2,2'-azobis(2-methylpropionamide) dihydrochloride initiation system. Subsequently, the copolymer was characterized by FT-IR, 1H NMR, TG-DTG and water-solubility. And the biodegradability test indicated that the copolymer was not deemed to be readily biodegradable via a closed bottle test established by the Organization for Economic Co-operation and Development (OECD 301 D). Meanwhile the copolymer could significantly enhance the viscosity of the aqueous solution in comparison with partially hydrolyzed polyacrylamide. A viscosity retention of 51.9% indicated the result of a dramatic improvement of temperature tolerance. And then the excellent salt resistance, shear resistance, viscoelasticity, long-term stability of the copolymer could be obtained, which provides a good theoretical foundation for the application in enhanced oil recovery. In addition, this copolymer exerted stronger mobility control ability with a resistance factor of 22.1 and a residual resistance factor of 5.0, and superior ability for enhanced oil recovery of 12.9%. Hence, the copolymer has potential application for enhanced oil recovery in high-temperature and high-salinity reservoirs.

A novel water-soluble hydrophobically associating polyacrylamide based on oleic imidazoline and sulfonate for enhanced oil recovery

3-(2-(2-Heptadec-8-enyl-4,5-dihydro-imidazol-1-yl)ethylcarbamoyl)acrylic acid (NIMA), 3-(diallyl-amino)-2-hydroxypropyl sulfonate (NDS), acrylamide (AM) and acrylic acid (AA) were successfully utilized to prepare novel acrylamide-based copolymers (named AM/AA/NIMA and AM/AA/NDS/NIMA) which were functionalized by a combination of imidazoline derivative and/or sulfonate via redox free-radical polymerization. The two copolymers were characterized by infrared (IR) spectroscopy, 1H nuclear magnetic resonance (1H NMR), viscosimetry, pyrene fluorescence probe, thermogravimetry (TG) and differential thermogravimetry (DTG). As expected, the polymers exhibited excellent thickening property, shear stability (viscosity retention rate 5.02% and 7.65% at 1000 s-1) and salt-tolerance (10:000 mg L-1 NaCl: viscosity retention rate up to 17.1% and 10.2%) in comparison with similar concentration partially hydrolyzed polyacrylamide (HPAM). The temperature resistance of the AM/AA/NDS/NIMA solution was also remarkably improved and the viscosity retention rate reached 54.8% under 110 °C. According to the core flooding tests, oil recovery could be enhanced by up to 15.46% by 2000 mg L-1 of the AM/AA/NDS/NIMA brine solution at 80 °C.

Thermally stable imidazoline-based sulfonate copolymers for enhanced oil recover

Novel imidazoline-based sulfonate copolymers (noted PAMDSCM and PAMPSCM) were successfully prepared by copolymerization of acrylamide (AM), acrylic acid (AA), 1-acrylamido ethyl-2-oleic imidazoline (ACEIM) with the sodium salts of 3-(diallyl-amino)-2-hydroxypropyl (NDS) or 2-acrylamido-2-methylpropane sulfonic acid (AMPS), respectively. The copolymers were characterized by infrared (IR) spectroscopy, 1H nuclear magnetic resonance (1H NMR) spectroscopy, pyrene fluorescence probe spectroscopy, viscosimetry and thermogravimetry (TG). Both PAMDSCM and PAMPSCM copolymers had excellent high-temperature tolerance in comparison with the same concentration of HPAM, and the residual viscosities were 32.0 mPa s and 31.3 mPa s (viscosity retention rates were 38.8% and 37.1%) at 140 °C, respectively. The copolymers possessed superior long-term thermal stability and their residual viscosity rates were up to 81.8% and 63.8% (52.9 mPa s and 47.1 mPa s) lasting 1.5 hours at 100 °C and 170 s-1, respectively.

Asymmetric oil shocks and external balances of major oil exporting and importing countries

This study investigates the effects of oil price shocks on three measures of oil exporters' and oil importers' external balances: total trade balance, oil trade balance and non-oil trade balance. We employ three second-generation heterogeneous linear panel models and one recently developed non-linear panel estimation technique that allows for cross-sectional dependence. With respect to 28 major oil exporting countries, an increase in oil prices leads to an improved real oil trade balance, although it is detrimental to non-oil and total trade balances. This finding might be due to the expenditure effect arising from increases in proceeds from oil exports. A decrease in oil prices is found to be beneficial for both total and oil trade balances in these oil exporting countries. Forty major oil importers seem to be increasingly shielded from positive oil shocks over the 1970s and 1980s; however, they must worry about oil price declines. A decline in oil prices has a negative impact on both total and real oil trade balances resulting from increased oil imports in emerging economies. Hence, a decline in oil prices is beneficial to oil exporters due to the quantity effect outweighing the price effect, while for oil importers a stable oil price is more desirable than a price decline. These results are important to take into account if we are to gain a full understanding on the magnitude of the trade and macroeconomic effects of oil price changes and what the policy responses should be.

Gulf of Mexico's Offshore Oil Platform Wind Potential

There are over 6000 natural resource drilling platforms in the Gulf of Mexico, all of which will become obsolete once their deposits are extracted. This study examined one of the possible alternate uses for these platforms, wind power potential. Using ArcGIS the number of platforms was reduced by weighting their distance from National Data Buoy Center wind speed collection points and water depth. Calculations were done to assess the optimal sites remaining, as well as provide an estimate of the energy potential for each site. Data for this project was obtained from the Minerals Management Service (MMS), United States Geological Service (USGS), and National Data Buoy Center (NDBC). A major limitation of this project was a lack of NDBC wind speed buoys, creating large data gaps and excluding many oil rigs that have otherwise high energy potential.

Gestão pela qualidade total no serviço de recursos humanos da Petrobrás: uma avaliação de sua implantação

Este trabalho procurou avaliar a implantação de Gestão pela Qualidade Total - GQT no Serviço de Recursos Humanos - SEREC da Petrobrás, através de uma pesquisa de campo, dentro de um contexto historicista. O problema identificado para a pesquisa foi: quais as possibilidades e dificuldades da implantação da Gestão pela Qualidade Total no SEREC ? Com o intuito de melhor subsidiar a pesquisa, foram estudados os conceitos acerca da formação do petróleo, do gás natural e do xisto; foram resumidamente explicadas cada uma das principais atividades desenvolvidas pela Petrobrás; foram aborbados alguns aspectos históricos que envolveram a sua origem. Em seguida estudou-se a evolução da função RH na Petrobrás, desde a sua criação até o final de 1995. Trataram-se os aspectos que envolveram a implantação da GQT no SEREC, inicialmente percorrendo os princípios e acontecimentos que nortearam sua implantação na Petrobrás-holding. Ao final, analisou-se a pesquisa de campo.