Heat for nothing or activity for free? Evidence and implications of activity-thermoregulatory heat substitution

If heat generated through activity can substitute for heat required for thermoregulation, then activity in cold environments may be energetically free for endotherms. Although the possibility of activity-thermoregulatory heat substitution has been long recognized, its empirical generality and ecological implications remain unclear. We combine a review of the literature and a model of heat exchange to explore the generality of activity-thermoregulatory heat substitution, to assess the extent to which substitution is likely to vary with body size and ambient temperature, and to examine some potential macroecological implications. A majority of the 51 studies we located showed evidence of activity-thermoregulatory heat substitution (35 of 51 studies), with 28 of 32 species examined characterized by substitution in one or more study. Among studies that did detect substitution, the average magnitude of substitution was 57%, but its occurrence and extent varied taxonomically, allometrically, and with ambient temperature. Modeling of heat production and dissipation suggests that large birds and mammals, engaged in intense activity and exposed to relatively warm conditions, have more scope for substitution than do smaller endotherms engaged in less intense activity and experiencing cooler conditions. However, ambient temperature has to be less than the lower critical temperature (the lower bound of the thermal neutral zone) for activity-thermoregulatory heat substitution to occur and this threshold is lower in large endotherms than in small endotherms. Thus, in nature, substitution is most likely to be observed in intermediate-sized birds and mammals experiencing intermediate ambient temperatures. Activity-thermoregulatory heat substitution may be an important determinant of the activity patterns and metabolic ecology of endotherms. For example, a pattern of widely varying field metabolic rates (FMR) at low latitudes that converges to higher and less variable FMR at high latitudes has been interpreted as suggesting that warm environments at low latitudes allow a greater variety of feasible metabolic niches than do cool, high-latitude environments. However, activity-thermoregulatory heat substitution will generate this pattern of latitudinal FMR variation even if endotherms from cold and warm climates are metabolically and behaviorally identical, because the metabolic rates of resting and active animals are more similar in cold than in warm environments. Activity-thermoregulatory heat substitution is an understudied aspect of endotherm thermal biology that is apt to be a major influence on the physiological, behavioral and ecological responses of free-ranging endotherms to variation in temperature.

A new gm-boosting current reuse CMOs folded cascode LNA

In this paper, a new gain enhancement technique which is recommended for folded cascode LNA structures at low voltage and low power applications is presented. In order to increase power gain, a new modified version of gm-boosting technique is employed which increases the power gain while consuming no extra power. The new topology shares its DC current at the folded stage in order to reduce power dissipation associated with the gm-boosting technique. The proposed technique reduces power dissipation almost 27%, additionally; other parameters such as power gain and noise figure have been slightly improved. In the proposed LNA, power gain and noise figure are15dB and 3.2dB respectively. It consumes 1.3mW under 0.6 supply voltage.

Polymer-metal schottky contact with direct-current outputs

A freestanding conducting polymer plate with one side forming a Schottky contact and the other side an Ohmic contact with two different metal electrodes can generate a DC voltage with an output current density as high as 218.6 μA cm(-2) upon mechanical deformation.

Estudo de galpões para a criação de frangos de corte, do ponto de vista higrotérmico, nas condições climáticas brasileiras

O trabalho enfoca o projeto de galpões para a criação de frangos de corte, do ponto de vista do seu desempenho térmico, nas condições climáticas brasileiras. Define as margens das condições têrmicas de rendimento, usando como indicador a conversão alimentar e, através da metodologia da especificação por desempenho, apresenta as características dos galpões, apontando as principais vias para a solução dos problemas higrotérmicos. No trabalho há uma revisão bibliográfica em relação ao tema da fisiologia das aves, no que se refere a produção e dissipação do calor corporal para o meio ambiente. Foi dado um enfoque à análise do tema de transmissão de calor, com o intuito de servir de guia para os estudos dos profissionais da área de Ciências Agrárias.

Análise dinâmica de solos submetidos à ação simultânea das três componentes da excitação na base rochosa

Durante a análise sísmica de estruturas complexas, o modelo matemático empregado deveria incluir não só as distribuicões irregulares de massas e de rigidezes senão também à natureza tridimensional da ecitação sísmica. Na prática, o elevado número de graus de liberdade involucrado limita este tipo de análise à disponibilidade de grandes computadoras. Este trabalho apresenta um procedimento simplificado, para avaliar a amplificação do movimento sísmico em camadas de solos. Sua aplicação permitiria estabelecer critérios a partir dos quais avalia-se a necessidade de utilizar modelos de interação solo-estrutura mais complexos que os utilizados habitualmente. O procedimento proposto possui as seguientes características : A- Movimento rígido da rocha definido em termos de três componentes ortagonais. Direção de propagação vertical. B- A ecuação constitutiva do solo inclui as características de não linearidade, plasticidade, dependência da história da carga, dissipação de energia e variação de volume. C- O perfil de solos é dicretizado mediante um sistema de massas concentradas. Utiliza-se uma formulação incremental das equações de movimento com integração directa no domínio do tempo. As propriedades pseudo-elásticas do solo são avaliadas em cada intervalo de integração, em função do estado de tensões resultante da acção simultânea das três componentes da excitação. O correcto funcionamento do procedimento proposto é verificado mediante análises unidimensionais (excitação horizontal) incluindo estudos comparativos com as soluções apresentadas por diversos autores. Similarmente apresentam-se análises tridimensionais (acção simultânea das três componentes da excitação considerando registros sísmicos reais. Analisa-se a influência que possui a dimensão da análise (uma análise tridimensional frente a três análises unidimensionais) na resposta de camadas de solos submetidos a diferentes níveis de exçitação; isto é, a limitação do Princípio de Superposisão de Efeitos.

A new perspective on the PPP hypothesis

This paper the stastistical properties of the real exchange rates of G-5 countries for the Bretton-Woods peiod, and draw implications on the purchasing power parity (PPP) hypothesis. In contrast to most previous studies that consider only unit root and stationary process to describe the real exchange tae, this paper also considers two in-between processes, the locally persistent process ans the fractionally integrated process, to complement past studies. Seeking to be consistent with tha ample evidence of near unit in the real exchange rate movements very well. This finding implies that: 1) the real exchange movement is more persistent than the stationary case but less persistent than the unit root case; 2) the real exchange rate is non-stationary but the PPP reversion occurs and the PPP holds in the long run; 3) the real exchange rate does not exhibit the secular dependence of the fractional integration; 4) the real exchange rate evolves over time in a way that there is persistence over a range of time, but the effect of shocks will eventually disappear over time horizon longer than order O (nd), that is, at finite time horizon; 5) shocks dissipation is fasters than predicted by the fractional integracion, and the total sum of the effects of a unit innovation is finite, implying that a full PPP reversion occurs at finite horizons. These results may explain why pasrt empirical estudies could not provide a clear- conclusion on the real exchange rate processes and the PPP hypothesis.

Designing single event upset mitigation techniques for large SRAM-Based FPGA components

This thesis presents the study and development of fault-tolerant techniques for programmable architectures, the well-known Field Programmable Gate Arrays (FPGAs), customizable by SRAM. FPGAs are becoming more valuable for space applications because of the high density, high performance, reduced development cost and re-programmability. In particular, SRAM-based FPGAs are very valuable for remote missions because of the possibility of being reprogrammed by the user as many times as necessary in a very short period. SRAM-based FPGA and micro-controllers represent a wide range of components in space applications, and as a result will be the focus of this work, more specifically the Virtex® family from Xilinx and the architecture of the 8051 micro-controller from Intel. The Triple Modular Redundancy (TMR) with voters is a common high-level technique to protect ASICs against single event upset (SEU) and it can also be applied to FPGAs. The TMR technique was first tested in the Virtex® FPGA architecture by using a small design based on counters. Faults were injected in all sensitive parts of the FPGA and a detailed analysis of the effect of a fault in a TMR design synthesized in the Virtex® platform was performed. Results from fault injection and from a radiation ground test facility showed the efficiency of the TMR for the related case study circuit. Although TMR has showed a high reliability, this technique presents some limitations, such as area overhead, three times more input and output pins and, consequently, a significant increase in power dissipation. Aiming to reduce TMR costs and improve reliability, an innovative high-level technique for designing fault-tolerant systems in SRAM-based FPGAs was developed, without modification in the FPGA architecture. This technique combines time and hardware redundancy to reduce overhead and to ensure reliability. It is based on duplication with comparison and concurrent error detection. The new technique proposed in this work was specifically developed for FPGAs to cope with transient faults in the user combinational and sequential logic, while also reducing pin count, area and power dissipation. The methodology was validated by fault injection experiments in an emulation board. The thesis presents comparison results in fault coverage, area and performance between the discussed techniques.

Síntese e caracterização de NiO-CGO para anodo e eletrólitos sólidos e base de Céria para SOFC

The direct use of natural gas makes the Solid Oxide Fuel Cell (SOFC) potentially more competitive with the current energy conversions technologies. The Intermediate Temperature SOFC (IT-SOFC) offer several advantages over the High Temperature SOFC (HT-SOFC), which includes better thermal compatibility among components, fast start with lower energy consumption, manufacture and operation cost reduction. The CeO2 based materials are alternatives to the Yttria Stabilized Zirconia (YSZ) to application in SOFC, as they have higher ionic conductivity and less ohmic losses comparing to YSZ, and they can operate at lower temperatures (500-800°C). Ceria has been doped with a variety of cations, although, the Gd3+ has the ionic radius closest to the ideal one to form solid solution. These electrolytes based in ceria require special electrodes with a higher performance and chemical and termomechanical compatibility. In this work compounds of gadolinia-doped ceria, Ce1-xGdxO2-δ (x = 0,1; 0,2 and 0,3), used as electrolytes, were synthesized by polymeric precursors method, Pechini, as well as the composite material NiO - Ce0,9Gd0,1O1,95, used as anode, also attained by oxide mixture method, mixturing the powders of the both phases calcinated already. The materials were characterized by X ray diffraction, dilatometry and scanning electronic microscopy. The refinement of the diffraction data indicated that all the Ce1-xGdxO2-δ powders were crystallized in a unique cubic phase with fluorite structure, and the composite synthesized by Pechini method produced smaller crystallite size in comparison with the same material attained by oxide mixture method. All the produced powders had nanometric characteristics. The composite produced by Pechini method has microstructural characteristics that can increase the triple phase boundaries (TPB) in the anode, improving the cell efficiency, as well as reducing the mass transport mechanism effect that provokes anode degradation

Influência do método de síntese e caracterização de pós compósitos de NiO- Ce1-xEuxO2-δ para anodos catalíticos de células a combustível

Fuel cells are electrochemical devices that convert chemical energy into electricity. Due to the development of new materials, fuel cells are emerging as generating clean energy generator. Among the types of fuel cells, categorized according to the electrode type, the solid oxide fuel cells (SOFC) stand out due to be the only device entirely made of solid particles. Beyond that, their operation temperature is relatively high (between 500 and 1000 °C), allowing them to operate with high efficiency. Another aspect that promotes the use of SOFC over other cells is their ability to operate with different fuels. The CeO2 based materials doped with rare earth (TR+3) may be used as alternatives to traditional NiO-YSZ anodes as they have higher ionic conductivity and smaller ohmic losses compared to YSZ, and can operate at lower temperatures (500-800°C). In the composition of the anode, the concentration of NiO, acting as a catalyst in YSZ provides high electrical conductivity and high electrochemical activity of reactions, providing internal reform in the cell. In this work compounds of NiO - Ce1-xEuxO2-δ (x = 0.1, 0.2 and 0.3) were synthesized from polymeric precursor, Pechini, method of combustion and also by microwave-assisted hydrothermal method. The materials were characterized by the techniques of TG, TPR, XRD and FEG-SEM. The refinement of data obtained by X-ray diffraction showed that all powders of NiO - Cex-1EuxO2-δ crystallized in a cubic phase with fluorite structure, and also the presence of Ni. Through the characterizations can be proved that all routes of preparation used were effective for producing ceramics with characteristics suitable for application as SOFC anodes, but the microwave-assisted hydrothermal method showed a significant reduction in the average grain size and improved control of the compositions of the phases

Características do pelame de vacas Holandesas em ambiente tropical: um estudo genético e adaptativo

As características do pelame (espessura da capa, comprimento médio dos pêlos, número de pêlos por unidade de área, densidade de massa dos pêlos, ângulo de inclinação dos pêlos com respeito a superfície da epiderme e diâmetro médio do pêlos) foram avaliadas em 973 vacas da raça Holandesa, entre novembro de 2000 e abril de 2001, numa área localizada 20cm abaixo da coluna vertebral, no centro do tronco, tanto nas malhas brancas como nas negras. As amostras de pêlos foram obtidas com um alicate comum adaptado. O método da Máxima Verossimilhança Restrita (REML) foi usado para estimar os componentes de variância e covariância sob modelo animal, sendo empregado o sistema MTDFREML. Os resultados mostraram que as características do pelame preto são diferentes das do branco, quando os animais são criados em ambiente tropical. O pelame preto apresentou-se menos denso, com pêlos mais curtos e grossos devido à maior necessidade de perder calor, enquanto que, o pelame branco é mais denso e com pêlos mais compridos, oferecendo uma melhor proteção contra à radiação solar direta. A seleção de vacas predominantemente negras pode ser uma boa escolha para aumentar a resistência do gado Holandês às condições do ambiente tropical, principalmente à radiação solar, quando esses animais são criados a campo, devido a que a epiderme sob esse tipo de malhas é altamente pigmentada. Tal seleção pode ser facilmente realizada, considerando a alta herdabilidade (h²=0,75) para a proporção de malhas negras. Esta seleção deve ser realizada no sentido de um pelame menos denso, com pêlos curtos e grossos favorecendo as perdas de calor sensível e calor latente.

Does low-protein diet improve broiler performance under heat stress conditions?

Nutrition for broilers under high temperatures is extremely important for brazilian broiler chicken industry because the amounts of consumed nutrients and environmental temperature have great effects on bird performance and carcass quality. Among diet nutrients, protein has the highest heat increment; thus, during many years, diets with low protein level were recommended in order to reduce heat production in broiler chickens under heat stress. However, reports have shown that low-protein diets have negative effects on broiler performance when environmental temperature is high, because during heat stress, low food intake associated to a low diet protein induce amino acid deficiencies. Other studies have shown that broilers fed low-protein diets increase their energy requirement for maintenance with higher heat production. Thus, with the growth of broiler industry in tropical areas more challenges need to be faced by the farmers. So, both the ambient and nutritional conditions ought to be well managed to avoid negative effects on poultry production once they can affect the metabolism (body heat production under low temperature and body heat dissipation under high temperature) with consequence on poultry performance (meat and eggs).

Fisiologia do estresse calórico e a utilização de eletrólitos em frangos de corte

Várias alterações metabólicas e fisiológicas são desencadeadas em frangos de corte submetidos a altas temperaturas ambientais, o que pode acarretar em grandes perdas no desempenho e na imunocompetência destas aves. Além das técnicas de controle ambiental estarem sendo freqüentemente empregadas para a redução do impacto negativo do estresse calórico sobre o desempenho das aves, outras medidas estão constantemente sendo estudadas. Nos últimos anos, o manejo nutricional adequado também tem demonstrado ser efetivo como medida preventiva para o estresse calórico, pois o funcionamento do sistema termorregulador do frango (produção de calor, rotas evaporativas e não evaporativas de dissipação de calor) pode ser influenciado pela dieta, em especial, o estabelecimento de adequados balanços eletrolíticos, devido a sua importância fisiológica no mecanismo do estresse calórico. Assim, os mecanismos nutricionais devem ser reavaliados como uma ferramenta no controle desta disfunção metabólica das aves.

Obtenção e caracterização de um compósito de poliuretano de mamona e pó de vidro para aplicações em insolantes térmicos

Thermal insulation is used to protect the heated or cooled surfaces by the low thermal conductivity materials. The rigid ricin polyurethane foams (PURM) are used for thermal insulation and depend on the type and concentration of blowing agent. Obtaining PURM occurs by the use of polyol, silicone, catalyst and blowing agent are pre -mixed, reacting with the isocyanate. The glass is reusable, returnable and recyclable heat insulating material, whose time of heat dissipation determines the degree of relaxation of its structure; and viscosity determines the conditions for fusion, operating temperatures, annealing, etc. The production of PURM composites with waste glass powder (PV) represents economical and renewable actions of manufacturing of thermal insulating materials. Based on these aspects, the study aimed to produce and characterize the PURM composites with PV, whose the mass percentages were 5, 10, 20, 30, 40 and 50 wt%. PURM was obtained commercially, while the PV was recycled from the tailings of the stoning process of a glassmaking; when the refining process was applied to obtain micrometer particles. The PURM + PV composites were studied taking into account the standard sample of pure PURM and the influence of the percentage of PV in this PURM matrix. The results of the chemical, physical and morphological characterization were discussed taking into account the difference in the microstructural morphology of the PURM+PV composites and the pure PURM, as well the results of the physicochemical, mechanical e thermophysical tests by values obtained of density, hardness, compressive strength, specific heat, thermal conductivity and diffusivity. In general, the structure of pure PURM showed large, elongated and regular pores, while PURM+PV composites showed irregular, small and rounded pores with shapeless cells. This may have contributed to reducing their mechanical strength, especially for PURM - PV50. The hardness and density were found to have a proportional relationship with the PV content on PURM matrix. The specific heat, thermal diffusivity and thermal conductivity showed proportional relationship to each other. So, this has been realized that the increasing the PV content on PURM matrix resulted in the rise of diffusivity and thermal conductivity and the decrease of the specific heat. However, the values obtained by the PURM composites were similar the values of pure PURM, mainly the PURM-PV5 and PURM-PV10. Therefore, these composites can be applied like thermal insulator; furthermore, their use could reduce the production costs and to preserve the environment