U-Pb geochronology and Nd isotope contributions to the interpretation of a peculiar ring massif: the Santa Eulália plutonic complex (SW Iberia, Portugal)

The Santa Eulalia plutonic complex (SEPC) is a late-Variscan granitic body placed in the Ossa-Morena Zone. The host rocks of the complex belong to metamorphic formations from Proterozoic to Lower Paleozoic. The SEPC is a ring massif (ca. 400 km2 area) composed by two main granitic facies with different colours and textures. From the rim to the core, there is (i) a peripheral pink medium- to coarse-grained granite (G0 group) involving large elongated masses of mafic and intermediate rocks, from gabbros to granodiorites (M group), and (ii) a central gray medium-grained granite (G1 group). The mafic to intermediate rocks (M group) are metaluminous and show wide compositions: 3.34–13.51 wt% MgO; 0.70–7.20 ppm Th; 0.84–1.06 (Eu/Eu*)N (Eu* calculated between Sm and Tb); 0.23–0.97 (Nb/Nb*)N (Nb* calculated between Th and La). Although involving the M-type bodies and forming the outer ring, the G0 granites are the most differentiated magmatic rocks of the SEPC, with a transitional character between metaluminous and peraluminous: 0.00–0.62 wt% MgO; 15.00–56.00 ppm Th; and 0.19–0.42 (Eu/Eu*)N ; 0.08–0.19 (Nb/Nb*)N [1][2]. The G1 group is composed by monzonitic granites with a dominant peraluminous character and represents the most homogeneous compositional group of the SEPC: 0.65–1.02 wt% MgO; 13.00–16.95 ppm Th; 0.57–0.70 (Eu/Eu*)N ; 0.14–0.16 (Nb/Nb*)N . According to the SiO2 vs. (Na2O+K2O–CaO) relationships, the M and G1 groups predominantly fall in the calc-alkaline field, while the G0 group is essencially alkali-calcic; on the basis of the SiO2 vs. FeOt/(FeOt+MgO) correlation, SEPC should be considered as a magnesian plutonic association [3]. New geochronological data (U-Pb on zircons) slightly correct the age of the SEPC, previously obtained by other methods (290 Ma, [4]). They provide ages of 306  2 Ma for the M group, 305  6 Ma for the G1 group, and 301  4 Ma for the G0 group, which confirm the late-Variscan character of the SEPC, indicating however a faintly older emplacement, during the Upper Carboniferous. Recent whole-rock isotopic data show that the Rb-Sr system suffered significant post-magmatic disturbance, but reveal a consistent set of Sm-Nd results valuable in the approach to the magmatic sources of this massif: M group (2.9 < Ndi < +1.8); G1 group (5.8 < Ndi < 4.6); G0 group (2.2 < Ndi < 0.8). These geochemical data suggest a petrogenetic model for the SEPC explained by a magmatic event developed in two stages. Initially, magmas derived from long-term depleted mantle sources (Ndi < +1.8 in M group) were extracted to the crust promoting its partial melting and extensive mixing and/or AFC magmatic evolution, thereby generating the G1 granites (Ndi < 4.6). Subsequently, a later extraction of similar primary magmas in the same place or nearby, could have caused partial melting of some intermediate facies (e.g. diorites) of the M group, followed by magmatic differentiation processes, mainly fractional crystallization, able to produce residual liquids compositionally close to the G0 granites (Ndi < 0.8). The kinetic energy associated with the structurally controlled (cauldron subsidence type?) motion of the G0 liquids to the periphery, would have been strong enough to drag up M group blocks as those occurring inside the G0 granitic ring.

Mafic and felsic plutonism in the Elvas region (SW Iberia, Portugal): two distinct Nd isotope sources and geodynamics

The occurrence of mafic (mainly gabbros and diorites) and felsic (syenites and granites) rocks, in close spatial association, in the Elvas region, at the northern part of the Ossa-Morena Zone, could be interpreted as a single bimodal (alkaline) plutonic complex. However, in spite of scarce isotopic (Sm-Nd) data, the co-magmatic origin of both rock groups (mafic and felsic) has already been questioned [1]. Based on the mineral chemistry of primary clinopyroxenes (Di–Hd, %En: 45.5 – 27.2) and representative whole-rock analyses, gabbros and diorites of the Elvas massif show a transitional character between alkaline and non-alkaline fields and wide compositions: SiO2 (42.47 – 58.00 wt%); TiO2 (0.24 – 1.68 wt%); Y/Nb (4.0 – 10.7); Th (0.1 – 6.8 ppm); Zr (18.6 – 576.9 ppm). The felsic group is composed by highly differentiated rocks which correspond to distinct levels of silica saturation and alkalinity. Peralkaline syenites usually present sodic (riebeckite) and sodic-calcic (aegirine-augite, ferrowinchite) inosilicates and reveal quite variable compositions: SiO2 (57.50 – 72.07 wt%); TiO2 (0.10 – 1.45 wt%); Th (1.7 – 67.0 ppm); Zr (133.0 – 4800.0 ppm). The alkaline granites show hedenbergite as the characteristic inosilicate, presenting relatively common compositions: SiO2 (61.85 – 78.06 wt%); TiO2 (0.21 – 0.58 wt%); Th (11.8 – 38.4 ppm); Zr (317.3 – 1234.6 ppm) [2]. Recent Sm-Nd isotopic results, on a total of 18 whole-rock samples (6 mafites and 12 felsites), allow new and more consistent interpretation concerning the petrogenesis of these plutonic rocks. Assuming an age of 490 Ma [3], the felsic rocks provide (0.6 < Nd490 < 4.3), similar to other contemporary (per)alkaline rocks of this region [4], reflecting magmatic extractions from time-integrated depleted mantle sources followed by variable and incomplete mixing (and/or AFC-type) processes with enriched, probably crustal sources. This alkaline/peralkaline magmatism is thought to represent the main regional record of the rifting event which presumably led to the opening of the Rheic Ocean. On the other hand, the mafic plutonic rocks of the Elvas massif cannot represent the magmatic precursors of these syenites and granites as they show completely distinct Nd isotopic ratios (3.7 < Nd490 < 1.2) indicating important contribution of long-term enriched (crustal) sources. Instead, considering the age and the Nd isotopic signature of other mafic plutonic unit emplaced nearby (the Campo Maior massif: ca. 370 Ma; 6.0 < Nd370 < 5.2) [5], and recalculating the isotopic ratios of the Elvas massif for the same age (4.3 < Nd370 < 1.6), it is plausible to consider that these plutons (Campo Maior and Elvas) can be coeval and representative of the Variscan magmatism in this region. In such hypothesis, the differences between these isotopic values could be explained, on a time-integrated basis, either by magmatic sources for the Elvas massif less enriched in LREE than the sources involved in the Campo Maior massif, or, if both plutonites share similar depleted mantle sources, by magmatic differentiation paths considerably affected by crustal contamination processes, which reached higher degrees in the Campo Maior massif.

Effects of synthetic conditions on the structural, stability and ion conducting properties of Li0.30(La0.50Ln0.50)0.567TiO3 (Ln= La, Pr, Nd) solid electrolytes for rechargeable lithium batteries

The structure, thermal stability, morphology and ion conductivity of titanium perovskites with the general formula Li3xLn2/3−xTiO3 (Ln = rare earth element; 3x= 0.30) are studied in the context of their possible use as solid electrolyte materials for lithium ion batteries. Materials are prepared by a glycine-nitrate method using different sintering treatments, with a cation-disorder-induced structural transition from tetragonal to cubic symmetry, detected as quenching temperature increases. SEM images show that the average grain size increases with increasing sintering temperature and time. Slightly higher bulk conductivity values have been observed for quenched samples sintered at high temperature. Bulk conductivity decreases with the lanthanide ion size. A slight conductivity enhancement, always limited by grain boundaries, is observed for longer sintering times. TDX measurements of the electrolyte/cathode mixtures also show a good stability of the electrolytes in the temperature range of 30-1100ºC.

Nuevas cromitas de composición La1-xMxCr0.9Ni0.1O3(M=Sr, ND, Ca; x<0.3) con tamaño de A y desorden fijados, para su uso como ánodos de pilas SOFCs

Póster presentado en el XIV Congreso Nacional de Materiales (CNMAT) en Gijón (España), del 8 al 10 de Junio de 2016

Nd-Sr isotopes, diatom and biogenic opal content of Pliocene sediments from IODP Site 318-U1361

Warm intervals within the Pliocene epoch (5.33-2.58 million years ago) were characterized by global temperatures comparable to those predicted for the end of this century (Haywood and Valdes, doi:10.1016/S0012-821X(03)00685-X) and atmospheric CO2 concentrations similar to today (Seki et al., 2010, doi:10.1016/j.epsl.2010.01.037; Bartoli et al., 2011, doi:10.1029/2010PA002055; Pagani et al., 2010, doi:10.1038/ngeo724). Estimates for global sea level highstands during these times (Miller et al., 2012, doi:10.1130/G32869.1) imply possible retreat of the East Antarctic ice sheet, but ice-proximal evidence from the Antarctic margin is scarce. Here we present new data from Pliocene marine sediments recovered offshore of Adélie Land, East Antarctica, that reveal dynamic behaviour of the East Antarctic ice sheet in the vicinity of the low-lying Wilkes Subglacial Basin during times of past climatic warmth. Sedimentary sequences deposited between 5.3 and 3.3 million years ago indicate increases in Southern Ocean surface water productivity, associated with elevated circum-Antarctic temperatures. The geochemical provenance of detrital material deposited during these warm intervals suggests active erosion of continental bedrock from within the Wilkes Subglacial Basin, an area today buried beneath the East Antarctic ice sheet. We interpret this erosion to be associated with retreat of the ice sheet margin several hundreds of kilometres inland and conclude that the East Antarctic ice sheet was sensitive to climatic warmth during the Pliocene.

Dysprosium transport in Nd-Fe-B pellets

The addition of heavy rare earth (RE) elements to Nd2Fe14B based magnets to form (Nd,Dy)2Fe14B is known to increase the coercivity and high temperature performance required for hybrid vehicle electric motors and other extreme temperature applications. Attempts to conserve heavy rare earth elements for high temperature (RE)2Fe14B based magnets have led to the development of a grain boundary diffusion process for bulk magnets. This process relies on transport of a heavy rare earth, such as Dy, into a bulk Nd2Fe14B magnet along pores, a low volume fraction of eutectic liquid along grain boundary grain triple junctions and grain boundaries. This enriches the grain surfaces in Dy through the thickness of the bulk magnet, leading to larger increases coercivity with a smaller Dy concentration than can be achieved with homogeneous alloys. Attempts to carry out the same process during sintering require significant control of Dy transport efficiency. The macroscopic transport of Dy in Nd2.7Fe14B1.4 based powder packs is studied using a 'layered' pellet, where Nd2.7Fe14B1.4powder is an interlayer and Dy source as a center layer. The sintering of this layered pellet provided evidence for very large effective diffusion lengths aided by Dy rich liquid flow through connected porosity. Approaches to controlling Dy transportation include decreasing the liquid phase transport capability of the powder pack by increasing the melting point of the Dy source and the decreasing amount of RE rich liquid in the powder packs. The solid-liquid reaction is studied in which melt spun Nd2.7Fe14B1.4 ribbons are PVD coated with Dy-Fe eutectic composition and then thermally treated. The resulting microstructure from the reaction between Dy-Fe eutectic coating and Nd2.7Fe14B1.4 ribbon is interpreted as support for a proposed dissolution/reprecipitation process between solid and liquid phases. The estimate the diffusion coefficient and the effective diffusion length of Dy sources in Nd2.7Fe14B1.4 layered pellets and melt spun ribbons were obtained from the calculation of Fick's second law combined with EDS results from the experiment. The results indicate that the effective diffusion coefficient of Dy in the layered pellets is higher than the diffusion in ribbons due to its higher porosity than ribbons.

Immunity Response of Gumboro and ND Vaccination Result which Given with Time Spacing in Broiler Chicken

An experiment was planed to know  the possibility of negative effect on Gumboro vaccination program. This program has a possibility to cause “Sick” condition on fabrious bursal of broiler chicken. From that case, it need time spacing for subsequent vaccination program, for instance ND vaccination program.  Time spacing is very importance to broiler chicken for recovering that “Sick” condition because of Gumboro vaccination effect. The purpose of his research was to know the best time spacing between Gumboro and ND vaccination program on broiler chicken. An experimental  method was used in this research, and the material used was 216 broiler chickens. A 3x4 factorial arrangement (Gumboro vaccination as factor A and ND vaccination  as factor B) with three broiler chickens per unit and six replicates of each treatment combination was used in the  research. Variables tested of  this experiment HI ND antibody titer, body weight  of 4 weeks old, and the symptom appeared after vaccination program. Anava was used to analyze the data obtained and used orthogonal polynomial for subsequent analysis. The research  results showed that the best time spacing was eight days and there was no symptom  appeared after  Gumboro  vaccination program. There were no significantly influence of vaccination treatments on broiler chicken health and body weight. (Animal Production 3(2): 67-73 (2001) Key Words: Vaccination, symptom, antibody

Maternal Antibody of DOC Pelung from Combine ND-Vaccinated Hen

A research entitled “Maternal Antibody of Pelung Day Old Chicken From Combine ND-Vaccinated Hen” has been done at Deddy Farm, Brebes. The materials were 25 hens and 5 cocks parental Pelung and 50 DOC (day old chick) hatched from those parent. Completely Randomized Design was performed in this experiment. The treatment consists of double dosages of inactive ND vaccine, active ND vaccine and cloned ND vaccine. The parameter was the immunity response on the parents and maternal antibody titer of the raised DOC. The results showed that; (1) one dosage of inactive ND vaccine combined with one dosage of active ND vaccine on Pelung chicken, yielding the best immunity response on the parent. The raised DOC also indicates the best maternal antibody titer, (2) giving two dosages of either inactive or active ND vaccine on the parent and the DOC could be analyzed alternatively to obtain a good immunityresponse, (3) the use of one dosage cloned-ND vaccine and one dosage of inactive or active ND vaccine on Pelung chicken yielding a low immunity response on the parent and the raised DOC. (Animal Production 5(1): 11-18 (2003) Key words : Vaccination, Immunity, Maternal, Antibody, Pelung, Chicken

Some Remarks on the Approximation of Transitional Density in Stochastic Differential Equations

Aijt-Sahalia (2002) introduced a method to estimate transitional probability densities of di®usion processes by means of Hermite expansions with coe±cients determined by means of Taylor series. This note describes a numerical procedure to ¯nd these coe±cients based on the calculation of moments. One advantage of this procedure is that it can be used e®ectively when the mathematical operations required to ¯nd closed-form expressions for these coe±cients are otherwise infeasible.