Construction of 2D transparent micromodels in polyester resin with porosity similar to carrots

Microscopic visualization, especially in transparent micromodels, can provide valuable information to understand the transport phenomena at pore scale in different process occurring in porous materials (food, timber, soils, etc.). Micromodels studies focus mainly on the observation of multi-phase flow, which presents a greater proximity to reality. The aim of this study was to study the process of flexography and its application in the manufacture of polyester resin transparent micromodels and its application to carrots. Materials used to implement a flexo station for micromodels construction were thermoregulated water bath, exposure chamber to UV light, photosensitive substance (photopolymer), RTV silicone polyester resin, and glass plates. In this paper, data on size distribution of a particular kind of carrot we used, and a transparent micromodel with square cross-section as well as a Log-normal pore size distribution with pore radii ranging from 10 to 110 µm (average of 22 µm and micromodel size of 10 × 10 cm) were built. Finally, it stresses that it has successfully implemented the protocol processing 2D polyester resin transparent micromodels.

Evaluation of Petrifilm™ system compared with traditional methodology in count of indicators of sanitary-hygienic quality and pathogenic microorganisms in sheep milk

The objective of this study was to evaluate the applicability of the Petrifilm™ plates to enumerate microbial groups in sheep milk. Samples of sheep milk (n = 30) were plated simultaneously, to enumerate mesophilic aerobes, total coliforms, lactic acid bacteria, Staphylococcus aureus and Escherichia coli, using convencional reference protocols and Petrifilm™ plates. The results were compared using McNemar's test, linear regression and ANOVA (p < 0,05). The results demonstrated good significant between conventional methodologies and Petrifilm™ plates. Further, the Petrifim™ STX for counting S. aureus had higher recoverability of bacteria compared with the conventional methodology. Based on the results obtained and in view of the ease and rapidity procedures results, Petrifim ™ plates may be considered as alternatives for microbiological testing in sheep milk.

Prevalence of Listeria monocytogenes in poultry meat

Abstract The objectives of this study were i) to isolate Listeria spp. and Listeria monocytogenes in broiler wing meat samples, ii) to confirm the isolates by PCR, based on prs and hly A gene sequences, iii) to determine the seasonal and monthly distribution of the isolates. A total of 120 broiler wing meat samples (60 packaged pieces wrapped using strech film in styrofoam plates and 60 unpackaged pieces) bought from different markets in Hatay province were analysed. Listeria spp. was isolated from 57 (47.5%) out of 120 samples. Fifty-four, out of 57 Listeria spp. isolates were identified as L. monocytogenes. L. monocytogenes was isolated from the samples collected during the spring, winter, summer, and autumn at the levels of 26.6%, 40%, 53.3%, 60%, respectively. In this study, the isolation rates were found to be the highest in autumn, while the isolation rates were found to be the lowest in spring. As a consequence, high prevalence of Listeria spp. and L. monocytogenes in poultry wing meat samples may pose a risk for human health. We consider that with obeying the rules of good hygiene practices (GHP), good manufacturing practices (GMP) and HACCP can minimize the contamination with Listeria spp.

Construction of a supercritical fluid extraction (SFE) equipment: validation using annatto and fennel and extract analysis by thin layer chromatography coupled to image

Abstract The present work describes setting up a laboratory unit for supercritical fluid extraction. In addition to its construction, a survey of cost was done to compare the cost of the homemade unit with that of commercial units. The equipment was validated using an extraction of annatto seeds’ oil, and the extraction and fractionation of fennel oil were used to validate the two separators; for both systems, the solvent was carbon dioxide. The chemical profiles of annatto and fennel extracts were assessed using thin layer chromatography; the images of the chromatographic plates were processed using the free ImageJ software. The cost survey showed that the homemade equipment has a very low cost (~US$ 16,000) compared to commercial equipment. The extraction curves of annatto were similar to those obtained in the literature (yield of 3.8% oil). The separators were validated, producing both a 2.5% fraction of fennel seed extract rich in essential oils and another extract fraction composed mainly of oleoresins. The ImageJ software proved to be a low-cost tool for obtaining an initial evaluation of the chemical profile of the extracts.

Simulation and material calibration of ultra high strength steel (UHSS) S960 welded joint under static tensile test utilizing finite element method (FEM)

The aim of this work was to calibrate the material properties including strength and strain values for different material zones of ultra-high strength steel (UHSS) welded joints under monotonic static loading. The UHSS is heat sensitive and softens by heat due to welding, the affected zone is heat affected zone (HAZ). In this regard, cylindrical specimens were cut out from welded joints of Strenx® 960 MC and Strenx® Tube 960 MH, were examined by tensile test. The hardness values of specimens’ cross section were measured. Using correlations between hardness and strength, initial material properties were obtained. The same size specimen with different zones of material same as real specimen were created and defined in finite element method (FEM) software with commercial brand Abaqus 6.14-1. The loading and boundary conditions were defined considering tensile test values. Using initial material properties made of hardness-strength correlations (true stress-strain values) as Abaqus main input, FEM is utilized to simulate the tensile test process. By comparing FEM Abaqus results with measured results of tensile test, initial material properties will be revised and reused as software input to be fully calibrated in such a way that FEM results and tensile test results deviate minimum. Two type of different S960 were used including 960 MC plates, and structural hollow section 960 MH X-joint. The joint is welded by BöhlerTM X96 filler material. In welded joints, typically the following zones appear: Weld (WEL), Heat affected zone (HAZ) coarse grained (HCG) and fine grained (HFG), annealed zone, and base material (BaM). Results showed that: The HAZ zone is softened due to heat input while welding. For all the specimens, the softened zone’s strength is decreased and makes it a weakest zone where fracture happens while loading. Stress concentration of a notched specimen can represent the properties of notched zone. The load-displacement diagram from FEM modeling matches with the experiments by the calibrated material properties by compromising two correlations of hardness and strength.

Pulsed laser deposition of YBa2Cu3O7-[delta]/PrBa2Cu3O7-[delta] /

The process of depositing thin films by the use of pulsed laser deposition (PLD) has become a more widely used technique for the growth of substances in a thin film form. Pulsed laser deposition allows for the stoichiometric film growth of the target which is of great significance in the deposition of High Temperature Superconducting materials. We will describe a system designed using an excimer laser and vaccum chamber in which thin films and superlattices of YBa2Cuj07_i, PrBa2Cu307_i, and YBajCujOr-j/ PrBajCusOr-^ were deposited on SrTiOs. Results of resistivity measurements using the four probe technique will be shown.

Isolation and characterization of a chitinase-secreting mutant of mortierella pusilla with altered interaction with the mycoparasite piptocephalis virginiana

Mortierella pusilla is a susceptible host and supports good growth of the mycoparasite, Piptocephalis virginiana. Uninucleate spores of M. pusilla were sUbjected to N-methyl-N'-nitro-nitrosoguanidine (MNNG). To attain a high mutation frequency , a 1o-minute exposure to 10 mg/ml MNNG was used and lead to the survival of about 10 % of the spores. The exposed spores then were plated on chitin or milk plates. Approximately 30,000 colonies were examined after mutagenesis on the screening media. A strain, MUT23 , with abnormal slow growth morphology was found to delay parasitism by £. virginiana. The particular morphology was not due to auxotrophy, because this strain displayed normal hyphae when glucose was used as the sole carbon source. One interesting phenomenon was that MUT23 showed an extensive clearing zone around the colony on colloidal chitin agar after 20-25 d. On the same conditions, wild type strain did not show this phenotype. In addition, the MUT23 strain produced the same normal hypha as the wild type strain when it was grown on colloidal chitin agar. The MUT23 was also able to produce more spores on colloidal chitin agar than on malt-yeast extract and minimal media. The parasite germ tubes formed appressoria at the point of contact on the cell surface of wild type and MUT23 grown for 6 days cell surface but not on the cel surface of MUT23 grown for 2 days. Thus, interaction between MUT23 strain and the mycoparasite was dependent on MUT23 age. The effect of MUT23 filtrate on germination of the parasite was tested. Lysis of germinated spores of the parasite were observed in concentrated MUT23 filtered solution. MUT23 was compared to the wild type strain for their chitinase production in sUbmerged culture. The chitinase isozymes of both wild type and MUT23 were shown by immunoblotting. Eight distinct chitinase molecules were detected. MUT23 showed markedly higher chitinase activity than the wild type cultured in chitin-containing medium. Maximum chitinase activities of MUT23 were 13.5 fold higher at 20 day of the culture then that of wild type.

Naval Occurrences of the Late War Between Great Britain and the United States of America- 1817

Full title is "A Full and Correct Account of the Chief Naval Occurrences of the Late War Between Great Britain and the United States of America; preceded by a Cursory Examination of the American Accounts of their Naval Actions Fought Previous to that Period: to Which is Added an Appendix; with Plates" This is an expanded version of author William James' pamphlet "An Inquiry into the Merits of the Principal Naval Actions between Great Britain and the United States." (Halifax, Nova Scotia, 1816) In this work he discussed how American ships, during the War of 1812, were larger and more heavily armed and manned than those of the British. He therefore, stated that American victories were due only to their greater numerical force and not their superior seamanship. Naval Occurrences is a thorough documentation of the naval operations from the British perspective that addresses contradictions and inconsistencies within the American official documents as well as political and media accounts. This is perhaps his motivation for the words "Corrected Account" within the title. James' sentiments towards the US most likely sprouted from being held prisoner while visiting in 1812. (He was falsely accused of being a renegade seeking revenge on the US.) In 1813, he escaped to Halifax where he began writing on various naval topics. James became one of the leading authorities on British Naval History.

Niagara River and Falls from Lake Erie to Lake Ontario : a series of one hundred and fifty-three original etchings (1886)

A portfolio of 50 folio and 103 vignette etchings, printed on fine china paper, which has been pressed into a sturdy hand-made paper. The plates were printed by J.H. Daniels of Boston in black, brown, sepia or blue ink. All prints are dated, numbered, and signed or initialed in the plate by Sangster, and the folio prints have pencil signatures. Vol. 1. Vignettes (nos. 1-53) -- vol. 2. Vignettes (nos. 54-103) -- vol. 3. Plates (vol. 1 and 2, nos. 1-50).

Niagara River and Falls from Lake Erie to Lake Ontario : a series of one hundred and fifty-three original etchings (1886) Vol.2

A portfolio of 50 folio and 103 vignette etchings, printed on fine china paper, which has been pressed into a sturdy hand-made paper. The plates were printed by J.H. Daniels of Boston in black, brown, sepia or blue ink. All prints are dated, numbered, and signed or initialed in the plate by Sangster, and the folio prints have pencil signatures. Vol. 1. Vignettes (nos. 1-53) -- vol. 2. Vignettes (nos. 54-103) -- vol. 3. Plates (vol. 1 and 2, nos. 1-50).

Niagara River and Falls from Lake Erie to Lake Ontario : a series of one hundred and fifty-three original etchings (1886) Vol. 3

A portfolio of 50 folio and 103 vignette etchings, printed on fine china paper, which has been pressed into a sturdy hand-made paper. The plates were printed by J.H. Daniels of Boston in black, brown, sepia or blue ink. All prints are dated, numbered, and signed or initialed in the plate by Sangster, and the folio prints have pencil signatures. Vol. 1. Vignettes (nos. 1-53) -- vol. 2. Vignettes (nos. 54-103) -- vol. 3. Plates (vol. 1 and 2, nos. 1-50).