Shrinkage induced stretchable micro-wrinkled reduced graphene oxide composite with recoverable conductivity

A novel thermo-mechanical shrinking method is reported to fabricate a three dimensional (3D) stretchable and highly conductive micro-wrinkled reduced graphene oxide (MWrGO) supported on an elastic polydimethylsiloxane (PDMS) substrates. This 3D rGO architecture not only increases the specific area for more electrons to pass through but also bestows stretchability to the conductive pathway. The structural change of micro-wrinkles has been monitored by an in situ straining microscopy. The electrical conductivity of the samples remained fairly constant and stayed above 25 S/m under low deformation (no more than 30% strain) for up to 500 mechanical stretching-release cycles. Additionally, the MWrGO/PDMS composite can be stretched bi-axially because the shrinking process itself is isotropic. This MWrGO based stretchable composite with stable electrical properties and long life span could form a new platform of stretchable electronics.

Haptic virtual reality training environment for micro-robotic cell injection

Micro-robotic cell injection is typically performed manually by a trainedbio-operator, and success rates are often low. To enhance bio-operator performance during real-time cell injection, our earlier work introduced a haptically-enabled micro-robotic cell injection system. The system employed haptic virtual fixtures to provide haptic guidance according to articular performance metrics. This paper extends the work by replicating the system within a virtual reality (VR) environment for bio-operator training. Using the virtual environment, the bio-operator is able to control the virtual injection process in the same way they would with the physical haptic micro-robotic cell injection system, while benefiting from the enhanced visualisation capabilities offered by the 3D VR environment. The system is achieved using cost-effective components offering training at much lower cost than using the physical system.

Keyboard control method for virtual reality micro-robotic cell injection training

The rapid development of virtual reality offers significant potential for skills training applications. Our ongoing work proposes virtual reality operator training for the micro-robotic cell injection procedure. The interface between the operator and the system can be achieved in many different ways. The computer keyboard is ubiquitous in its use for everyday computing applications and also commonly utilized in virtual reality systems. Based on the premise that most people have experience in using a computer keyboard, as opposed to more sophisticated input devices, this paper considers the feasibility of using a keyboard to control the micro-robot for cell injection. In this study, thirteen participants underwent the experimental evaluation. The participants were asked to perform three simulated trial sessions in a virtual micro-robotic cell injection environment. Each session consisted of ten cell injection trials and relevant data for each trial were recorded and analyzed. Results showed participants' performance improvement after the three sessions. It was also observed that participants intuitively controlled multiple axes of the micro-robot simultaneously despite the absence of instruction on how to do so. This continued throughout the experiments and suggests skills transfer from other keyboard based interactions. Based on the results provided, it is suggested that keyboard control is a feasible, simple and low-cost control method for the virtual micro-robot.

Creating cycling-friendly environments for children: which micro-scale factors are most important? An experimental study using manipulated photographs

BACKGROUND: Increasing participation in transportation cycling represents a useful strategy for increasing children's physical activity levels. Knowledge on how to design environments to encourage adoption and maintenance of transportation cycling is limited and relies mainly on observational studies. The current study experimentally investigates the relative importance of micro-scale environmental factors for children's transportation cycling, as these micro-scale factors are easier to change within an existing neighborhood compared to macro-scale environmental factors (i.e. connectivity, land-use mix, …). METHODS: Researchers recruited children and their parents (n = 1232) via 45 randomly selected schools across Flanders and completed an online questionnaire which consisted of 1) demographic questions; and 2) a choice-based conjoint (CBC) task. During this task, participants chose between two photographs which we had experimentally manipulated in seven micro-scale environmental factors: type of cycle path; evenness of cycle path; traffic speed; traffic density; presence of speed bumps; environmental maintenance; and vegetation. Participants indicated which route they preferred to (let their child) cycle along. To find the relative importance of these micro-scale environmental factors, we conducted Hierarchical Bayes analyses. RESULTS: Type of cycle path emerged as the most important factor by far among both children and their parents, followed by traffic density and maintenance, and evenness of the cycle path among children. Among parents, speed limits and maintenance emerged as second most important, followed by evenness of the cycle path, and traffic density. CONCLUSION: Findings indicate that improvements in micro-scale environmental factors might be effective for increasing children's transportation cycling, since they increase the perceived supportiveness of the physical environment for transportation cycling. Investments in creating a clearly designated space for the young cyclist, separated from motorized traffic, appears to be the most effective way to increase perceived supportiveness. Future research should confirm our laboratory findings with experimental on-site research.

Haptic technology for micro-robotic cell injection training systems — a review

Currently, the micro-robotic cell injection procedure is performed manually by expert human bio-operators. In order to be proficient at the task, lengthy and expensive dedicated training is required. As such, effective specialized training systems for this procedure can prove highly beneficial. This paper presents a comprehensive review of haptic technology relevant to cell injection training and discusses the feasibility of developing such training systems, providing researchers with an inclusive resource enabling the application of the presented approaches, or extension and advancement of the work. A brief explanation of cell injection and the challenges associated with the procedure are first presented. Important skills, such as accuracy, trajectory, speed and applied force, which need to be mastered by the bio-operator in order to achieve successful injection, are then discussed. Then an overview of various types of haptic feedback, devices and approaches is presented. This is followed by discussion on the approaches to cell modeling. Discussion of the application of haptics to skills training across various fields and haptically-enabled virtual training systems evaluation are then presented. Finally, given the findings of the review, this paper concludes that a haptically-enabled virtual cell injection training system is feasible and recommendations are made to developers of such systems.

Design of a virtual reality training system for micro-robotic cell injection

This paper discusses the design of a virtual reality (VR) training system for micro-robotic cell injection. A brief explanation of cell injection and the challenges associated with the procedure are first presented. This is followed by discussion of the skills required by the bio-operator to achieve successful injection, such as accuracy, trajectory and applied force. The design of the VR system which includes the visual display, input controllers, mapping strategies, haptic guidance and output data is then discussed. Initial evaluation of the VR system is presented including analysis and discussion based on conducted user evaluations. Finally, given the findings of the initial evaluation, this paper concludes that an effective haptically-enabled virtual cell injection training system is feasible, and recommendations for improvement and future work are given.

Experiences in developing a micro-payment system for peer-to-peer networks

Micro-payment systems are an important part of peer-to-peer (P2P) networks and address the "free-rider" problem in most existing content sharing systems. To address this issue, the authors have developed a new micro-payment system for content sharing in P2P networks called P2P-Netpay. This is an offline, debit based protocol that provides a secure, flexible, usable and reliable credit service. This article compares micro-payment with non-micro-payment credit systems for file sharing applications and finds that this approach liberates the "free-rider" problem. The authors analyse the heuristic evaluation performed by a set of evaluators and present directions for research aiming to improve the overall satisfaction and efficiency of the proposed model.

A contribuição dos relacionamentos interorganizacionais no processo de aprendizagem em gestão empresarial: Um estudo em micro e pequenas empresas do Polo Design Center

Dissertação de Mestrado apresentada como exigência parcial para a obtenção do título de Mestre em Administração no Programa de Mestrado em Administração da Universidade Municipal de São Caetano do Sul.

O uso comercial da internet por micro, pequenas e médias empresas de Porto Alegre : um estudo exploratório sobre as empresas do trade point Porto Alegre

Uma grande evolução aconteceu no mundo com o surgimento da Internet. Ela causou um espantoso aumento das comunicações, que passaram a ser em tempo real e com uma abrangência mundial. Foi a democratização da informação. A Internet serve como uma grande ferramenta para as empresas, principalmente com a globalização dos mercados, fenômeno que cresce cada dia mais e atinge a todos. A globalização fez com que as organizações se tornassem globais, e a Internet funciona como um elo de ligação entre empresas, fornecedores e consumidores. Este trabalho consistiu na realização de uma pesquisa survey exploratória com o objetivo de verificar e descrever o uso potencial da Internet como ferramenta de auxílio à realização de negócios de caráter global, nas micro, pequenas e médias empresas de Porto Alegre. A amostra das empresas pesquisadas foi extraída do Trade Point Porto Alegre, por ser essa uma entidade que tem por objetivo auxiliar as empresas a realizarem operações globais. Com relação ao mercado global, o trabalho identificou que quase todas as empresas acreditam que ele tenha oportunidades de negócios. Os principais meios para entrar nesse mercado são a participação em feiras e rodadas de negócios, contato pessoal e o Trade Point. A Internet já está disseminada no meio empresarial, todas as empresas já a conhecem, e boa parte das empresas realizam operações que podem ser auxiliadas pela rede, como comunicação, promoção de produtos e acompanhamento pós-venda. Identificou-se que as microempresas são as que menos acreditam no mercado internacional, mas apontaram que a Internet pode ajudá-las em suas atividades. Já as pequenas empresas são as que atuam no mercado internacional e acreditam que a Internet possa ajudá-las em algumas atividades. Por fim, as médias empresas, também atuam no mercado internacional, principalmente com as exportações, e são as que já estão utilizando a Internet. O Trade Point se mostrou um serviço bem requisitado pelas empresas, principalmente as que atuam com o comércio internacional. As principais vantagens citadas foram a centralização de informações e a geração de novos negócios.

Otimização de equipes de prestação de serviços : um estudo de caso na área de suporte à micro informática

Essa dissertação aborda o tema simulação de serviços. É apresentada abordagem para estudo de empresas prestadoras de serviços a partir da ótica de avaliação e otimização de produtividade, custos operacionais e lead-time. A abordagem proposta foi desenvolvida com base em estudo de caso realizado junto à empresa Scherer Informática, que atua na área de manutenção de computadores. Os cenários gerados e as simulações dos serviços prestados foram realizados com o suporte de software específico para a modelagem de serviços: o Servicemodel. O estudo possibilitou a empresa conhecer: (i) o melhor dimensionamento das equipes de front office e back office, (ii) a melhor distribuição dos funcionários, que conduz a maior produtividade, (iii) a melhor qualificação da equipe, que minimiza custos operacionais, e, (iv) a análise do lead-time, que permitiu identificar as operações críticas e estabelecer um plano de melhorias visando agilizar o atendimento ao cliente. As etapas observadas no estudo de caso constituem uma abordagem para a otimização de serviços, que considera produtividade, custos operacionais e lead-time. Devido à generalidade das etapas propostas, a abordagem pode ser adaptada para o uso em outras empresas, subsidiando decisões relativas à melhoria dos processos de prestação de serviços.