A Multi Bearer Adaptable Communication Demonstrator for Train-to-Ground IP Communication to Increase Resilience

Preprint version

Repensando la transferencia tecnológica: una reconsideración de la teoría del desarrollo, el Banco Mundial y la tecnología = Rethinking Technology Transfer: A Review of Development

Esta tesis es, ante todo, un examen de la progresión histórica de la Teoría del Desarrollo y de la relación entre Tecnología y Desarrollo desde el inicio enunciativo de las nociones sobre estados “desarrollados” y “subdesarrollados.” Con una revisión pormenorizada de los informes “working papers” del Banco Mundial de los últimos años de la década de los 90 sobre Tecnología y Desarrollo, la tesis tiene como base un estudio histórico que se extiende hasta el presente. Este trabajo es una crítica de las políticas de Desarrollo, y específicamente, una crítica de la ideología de los últimos 50 años, su enfoque pide que el lector examine cómo el Banco Mundial plantea, en el presente, la Transferencia Tecnológica. La tesis se pregunta si el Banco Mundial es un organismo “actualizado” acerca de su visión en torno al Desarrollo, y busca examinar como la Tecnología presenta desafíos significativos para el futuro de las Relaciones Internacionales, así como de las relaciones entre los estados ricos y los estados pobres tecnológicamente hablando.

What kind of European Banking Union? Bruegel Policy Contribution [2012/12?]June 25, 2012

This paper discusses the creation of a European Banking Union. First, we discuss questions of design. We highlight seven fundamental choices that decision makers will need to make: Which EU countries should participate in the banking union? To which categories of banks should it apply? Which institution should be tasked with supervision? Which one should deal with resolution? How centralised should the deposit insurance system be? What kind of fiscal backing would be required? What governance framework and political institutions would be needed? In terms of geographical scope, we see the coverage of the banking union of the euro area as necessary and of additional countries as desirable, even though this would entail important additional economic difficulties. The system should ideally cover all banks within the countries included, in order to prevent major competitive and distributional distortions. Supervisory authority should be granted either to both the ECB and a new agency, or to a new agency alone. National supervisors, acting under the authority of the European supervisor, would be tasked with the supervision of smaller banks in accordance with the subsidiarity principle. A European resolution authority should be established, with the possibility of drawing on ESM resources. A fully centralized deposit insurance system would eventually be desirable, but a system of partial reinsurance may also be envisaged at least in a first phase. A banking union would require at least implicit European fiscal backing, with significant political authority and legitimacy. Thus, banking union cannot be considered entirely separately from fiscal union and political union. The most difficult challenge of creating a European banking union lies with the short-term steps towards its eventual implementation. Many banks in the euro area, and especially in the crisis countries, are currently under stress and the move towards banking union almost certainly has significant distributional implications. Yet it is precisely because banks are under such stress that early and concrete action is needed. An overarching principle for such action is to minimize the cost to the tax payers. The first step should be to create a European supervisor that will anchor the development of the future banking union. In parallel, a capability to quickly assess the true capital position of the system’s most important banks should be created, for which we suggest establishing a temporary European Banking Sector Task Force working together with the European supervisor and other authorities. Ideally, problems identified by this process should be resolved by national authorities; in case fiscal capacities would prove insufficient, the European level would take over in the country concerned with some national financial participation, or in an even less likely adverse scenario, in all participating countries at once. This approach would require the passing of emergency legislation in the concerned countries that would give the Task Force the required access to information and, if necessary, further intervention rights. Thus, the principle of fiscal responsibility of respective member states for legacy costs would be preserved to the maximum extent possible, and at the same time, market participants and the public would be reassured that adequate tools are in place to address any eventuality.

Food-chain transfer of zinc from contaminated Urtica dioica and Acer pseudoplatanus L. to Microlophium carnosum and Drepanosiphum platanoidis Schrank

This study examines the food-chain transfer of Zn from two plant species, Urtica dioica (stinging nettle) and Acer pseudoplatanus (sycamore maple), into their corresponding aphid species, Microlophium carnosum and Drepanosiphum platanoidis. The plants were grown in a hydroponic system using solutions with increasing concentrations of Zn from 0.02 to 41.9 mg Zn/l. Above-ground tissue concentrations in U. dioica and M. carnosum increased with increasing Zn exposure (p < 0.001). Zn concentrations in A. pseudoplatanus also increased with solution concentration from the control to the 9.8 mg Zn/l solution, above which concentrations remained constant. Zn concentrations in both D. platanoidis and the phloem tissue of A. pseudoplatanus were not affected by the Zn concentration in the watering solution. It appears that A. pseudoplatanus was able to limit Zn transport in the phloem, resulting in constant Zn exposure to the aphids. Zn concentrations in D. platanoidis were around three times those in M. carnosum. Concentrations of Zn in two aphid species are dependant on species and exposure.

Temperature- and Pressure-induced Proton Transfer in the 1:1 Adduct Formed between Squaric Acid and 4,4 '-Bipyridine

We have applied a combination of spectroscopic and diffraction methods to study the adduct formed between squaric acid and bypridine, which has been postulated to exhibit proton transfer associated with a single-crystal to single-crystal phase transition at ca. 450 K. A combination of X-ray single-crystal and very-high flux powder neutron diffraction data confirmed that a proton does transfer from the acid to the base in the high-temperature form. Powder X-ray diffraction measurements demonstrated that the transition was reversible but that a significant kinetic energy barrier must be overcome to revert to the original structure. Computational modeling is consistent with these results. Modeling also revealed that, while the proton transfer event would be strongly discouraged in the gas phase, it occurs in the solid state due to the increase in charge state of the molecular ions and their arrangement inside the lattice. The color change is attributed to a narrowing of the squaric acid to bipyridine charge-transfer energy gap. Finally, evidence for the possible existence of two further phases at high pressure is also presented.

A fast radiative transfer model for the assimilation of water vapor radiances from the Kalpana very high resolution radiometer

A fast radiative transfer model (RTM) to compute emitted infrared radiances for a very high resolution radiometer (VHRR), onboard the operational Indian geostationary satellite Kalpana has been developed and verified. This work is a step towards the assimilation of Kalpana water vapor (WV) radiances into numerical weather prediction models. The fast RTM uses a regression‐based approach to parameterize channel‐specific convolved level to space transmittances. A comparison between the fast RTM and the line‐by‐line RTM demonstrated that the fast RTM can simulate line‐by‐line radiances for the Kalpana WV channel to an accuracy better than the instrument noise, while offering more rapid radiance calculations. A comparison of clear sky radiances of the Kalpana WV channel with the ECMWF model first guess radiances is also presented, aiming to demonstrate the fast RTM performance with the real observations. In order to assimilate the radiances from Kalpana, a simple scheme for bias correction has been suggested.

Estimating the spatial scales of regionalized variables by nested sampling, hierarchical analysis of variance and residual maximum likelihood

The variogram is essential for local estimation and mapping of any variable by kriging. The variogram itself must usually be estimated from sample data. The sampling density is a compromise between precision and cost, but it must be sufficiently dense to encompass the principal spatial sources of variance. A nested, multi-stage, sampling with separating distances increasing in geometric progression from stage to stage will do that. The data may then be analyzed by a hierarchical analysis of variance to estimate the components of variance for every stage, and hence lag. By accumulating the components starting from the shortest lag one obtains a rough variogram for modest effort. For balanced designs the analysis of variance is optimal; for unbalanced ones, however, these estimators are not necessarily the best, and the analysis by residual maximum likelihood (REML) will usually be preferable. The paper summarizes the underlying theory and illustrates its application with data from three surveys, one in which the design had four stages and was balanced and two implemented with unbalanced designs to economize when there were more stages. A Fortran program is available for the analysis of variance, and code for the REML analysis is listed in the paper. (c) 2005 Elsevier Ltd. All rights reserved.