Pautas espaciales de la calidad material de vida : una lectura urbanoscópica de la metrópoli de Monterrey.

Tesis (Doctor en Filosofía con Orientación en Arquitectura y Asuntos urbanos) UANL, 2012.

Reducción del espesor del material dieléctrico base BaTiO? para capacitores.

Tesis (Doctor en Ciencias de la Ingeniería Mecánica con Especialidad en Materiales) UANL, 2011.

Simulación atomística de la fractura dinámica en un material frágil.

Tesis (Doctor en Ingeniería de Materiales) UANL, 2011.

Multidimensional Poverty and Material Deprivation

We examine the measurement of multidimensional poverty and material deprivation following the counting approach. In contrast to earlier contributions, dimensions of well-being are not forced to be equally important but different weights can be assigned to different dimensions. We characterize a class of individual measures reflecting this feature. In addition, we axiomatize an aggregation procedure to obtain a class of indices for entire societies allowing for different degrees of inequality aversion in poverty. We apply the proposed measures to European Union member states where the concept of material deprivation was initiated.

A detailed study of the lithiation of iron phosphate as well as the development of a novel synthesis of lithium iron silicate as cathode material for lithium-ion batteries

Dans cette thèse nous démontrons le travail fait sur deux matériaux de cathodes pour les piles lithium-ion. Dans la première partie, nous avons préparé du phosphate de fer lithié (LiFePO4) par deux méthodes de lithiation présentées dans la littérature qui utilisent du phosphate de fer (FePO4) amorphe comme précurseur. Pour les deux méthodes, le produit obtenu à chaque étape de la synthèse a été analysé par la spectroscopie Mössbauer ainsi que par diffraction des rayons X (DRX) pour mieux comprendre le mécanisme de la réaction. Les résultats de ces analyses ont été publiés dans Journal of Power Sources. Le deuxième matériau de cathode qui a été étudié est le silicate de fer lithié (Li2FeSiO4). Une nouvelle méthode de synthèse a été développée pour obtenir le silicate de fer lithié en utilisant des produits chimiques peu couteux ainsi que de l’équipement de laboratoire de base. Le matériau a été obtenu par une synthèse à l’état solide. Les performances électrochimiques ont été obtenues après une étape de broyage et un dépôt d’une couche de carbone. Un essai a été fait pour synthétiser une version substituée du silicate de fer lithié dans le but d’augmenter les performances électrochimiques de ce matériau.

Intertemporal Material Deprivation

Individual well-being is multidimensional and various aspects of the quality of life need to be jointly considered in its measurement. The axiomatic literature on the subject has proposed many indices of multidimensional poverty and deprivation and explored the properties that are at the basis of these measures. The purpose of this chapter is to add intertemporal considerations to the analysis of material deprivation. We employ the EU-SILC panel data set, which includes information on different aspects of well-being over time. EU countries are compared based on measures that take this additional intertemporal information into consideration. Journal of Economic Literature Classi cation No.: D63.

Under the roof and the pen of Elizabeth Willing Powel. Material culture, sociability, and letters in revolutionary and early republican Philadelphia

Ce mémoire a pour toile de fond Philadelphia à la fin du dix-huitième siècle et couvre les périodes de la Révolution américaine et les débuts de la République. Trois thèmes s’y entrelacent: la culture matérielle, la sociabilité, et l’agentivité des femmes. Ces trois thèmes sont explorés au travers de Elizabeth Willing Powel, une femme éduquée faisant partie de l’élite de Philadelphie, et des moyens avec lesquels elle s’auto-projetait auprès de la société au travers l’environnement matériel de sa maison – la Powel House – and au travers de sa correspondance. Elizabeth Powel était reconnue pour son intelligence, son art de la conversation et ses qualités d’hôtesse. Ce projet explore les interactions entre une femme de l’élite et son environnement matériel durant les périodes révolutionnaires et postrévolutionnaires. Le but est d’observer comment la culture matérielle représentait des positions sociales, culturelles et politiques. Ce mémoire observe les interactions sociales et les façons dont Elizabeth Powel se représente en société par une analyse de sa correspondance, analyse qui porte une attention particulière aux discours de Elizabeth sur les questions du rôle des femmes en société, de l’éducation des femmes. Enfin, ce mémoire explore comment la culture matérielle et l’écriture épistolaire étaient des vecteurs d’agentivité pour Elizabeth, des moyens de participer aux important changements qui transformaient la société américaine de la fin du dix-huitième siècle.

Polyaniline as an Automatic Beam Steering Material

This 'study' deals with a preliminary study of automatic beam steering properly in conducting polyaniline . Polyaniline in its undoped and doped .state was prepared from aniline by the chemical oxidative polymerization method. Dielectric properties of the samples were studied at S-band microwave frequencies using cavity perturbation technique. It is found that undoped po/vanihne is having greater dielectric loss and conductivity contpared with the doped samples. The beam steering property is studied using a perspex rod antenna and HP 85/OC vector network analyzer. The shift in the radiated beam is studied for different do voltages. The results show that polyaniline is a good nutterial far beam steering applications.

Recycling of NR Based Cured Latex Material Reclaimed with 2,2'-Dibenzamidodiphenyldisulphide in a TruckTire Tread Compound

It is observed that reclamation of natural rubber latex based rubber using 2,2'-dibenzamidodiphenvldisulphide as reclaiming agent is an optional methodology for recycling of waste latex rubber (WLR). For progressive replacement of virgin natural rubber by the reclaim, two alternatives curing system were investigated: adjustment or reduction of the curing system with increasing reclaim content, to compensate for the extra amount of curatives brought along by the reclaim. For fixed curing system, as if the reclaim were equivalent to virgin NR. The cure behavior, final crosslink density and distribution, mechanical properties, and dynamic viscoelastic properties of the blends with reclaimed WLR are measured and compared with the virgin compound. The morphology of the blends, sulfur migration, and final distribution are analyzed.The mechanical and dynamic viscoelastic properties deteriorate for both curing systems, but to a lesser extent for fixed curing system compared to adjusted curing system. With the fixed cure system, many properties like tensile strength and compression set do still deteriorate, but tan 6 and Mrrr„/Murxr, representative for the rolling resistance of tires are improved. On the other hand, with the adjusted cure system both mechanical and dynamic properties still deteriorate.

A Novel Radar-Absorbing-Material Based on EBG Structure

A navel ultra-thin radar-absorbing material (RAM) using metanwterials is presented and the absorption performance is examined. Due to the high-impedance property of the metamalerials. the thickness of the RAM is about several tenths of the center wavelength of the absorption band, which is considerably thinner than conventional absorbers. The absorption bandwidth of the RAM is about several hundred megahertz

A novel radar-absorbing-material based on EBG structure

An innovative phaseshifterless, wideband, micrustrip leaky-wave antenna with an electronically steerable dual-pencil-beam pattern in the H-plane is presented. The log-periodic geometry of the leaky slots of the antenna results in a wide bandwidth of 25.19%. The Jan beam can he steered up to 14° over the wide resonating band of the anteww. The beam is also steerable at a fixed frequency. by reactivelty loading the slots and a maximum steering angle of about 14° is ohserved. for different capacitor values with an improved bandwidth of 33 _i%. This concept is studied using passive components but it can be extended to varactors

Microwave Absorbing Material Using Rubber & Carbon

Development of a new type of microwave absorbing material using rubber latex and carbon. for application in the interior lining of anechoic chambers, has been reported. Absorption coefficients of different combinations were estimated at X and S bands and the results were presented graphically. A combination of 50% rubber latex, 40% carbon and 10% graphite is found to form an ideal microwave absorbing material in the X and s bands

Material Characterisation and Electro-Optical Studies of a Ferroelectric Liquid Crystal

Department of Electronics, Cochin University of Science and Technology

Characterization of Hydrothermally Annealed Low Temperature Bioactive Thin Film Coatings of Hydroxyapatite on TiAl6V4 Implant material

This thesis summarizes the results on the growth and characterisation of thin films of HA grown on TiAl6V4 (Ti) implant material at a lower substrate temperature by a combination of Pulsed laser deposition and a hydrothermal treatment to get sufficiently strong crystalline films suitable for orthopaedic applications. The comparison of the properties of the coated substrate has been made with other surface modification techniques like anodization and chemical etching. The in-vitro study has been conducted on the surface modified implants to assess its cell viability. A molecular level study has been conducted to analyze the adhesion mechanism of protein adhesion molecules on to HA coated implants.

Spray Pyrolysed CuInS2/In2S3 Solar Cell: Material Characterization and Device Fabrication

As emphasis towards sustainable and Renewable energy resources grows world-wide,interest in the capture and use of solar energy is increasing dramatically.Solar cells have been known and used for many years,but depletion of conventional energy resources resulted in the intensification of research on solar cells leading to new design and technique of fabrication.The current emphasis is directed towards high effiency inexpensive solar cells.This thesis includes deposition and characterization of CuInS2 and In2S3 thin films using chemical Spray Pyrolysis(CSP) technique.The optimum condition for these films to be used as absorber and buffer layer respectively in solar cells were thus found out.Solar cell with the stucture,ITO/CuInS2/In2S3/metal electrode was fabricated using these well-characterized films,which yielded an efficiency of 9.5%.