Geomorphology and land development in the Maraca area of northern Roraima, Brazil.

The geomorphological materials and forms of the Maraca area of Roraima, Brazil are described, an their sgnificance for land development examined. Significant contrasts are noted in areas presently under rainforest and savanna vegetation. Lateritic gravels and extensive shetwash accumulations in savanna areas constrast with incipient or absent plinthite development, few gravels and limited evidence of colluvium under rainforest. Terrain is in general relatively highly-dissected. Slope profiles are characterised, particularly within the savanna zone, by a relatively steep lower concavity. These contrasts are sharply-demarcated by the present savanna/rainforest bondary, unexpectedly in view of the generally accepted hypothesis of repeated contraction an expansion of Amazonian rainforest throughout the Pleistocene. It is concluded that geomorphological conditions in the Maraca area are not favorable for land develoment.

FOOD CONCENTRATION AND TEMPERATURE EFFECTS ON LIFE CYCLE CHARACTERISTICS OF TROPICAL CLADOCERA (Daphnia gessneri Herbst, Diaphanosoma sarsi Richard, Moina reticulata (Daday)): I. DEVELOPMENT TIME

The effects of food concentration and temperature on embryonic and postem-bryonic duration of three tropical species, Daphnia gessneri(1.5mm), Diaphanosoma sarsi(1.2mm) and Moina reticulata(0.8mm), were investigated as part of life cycle studies which included growth, body size and reproduction. These are the very first experimental studies undertaken on these species. The long-term growth experiments were performed under controlled laboratory conditions at all combinations of temperature (22"C, 27"C and 32"C) and constant food concentration (0.03, 0.05, 0.10, 0.25, 0.50 and 1.00 mgC/L) of the unicellular green alga Scenedesmus acutus.Animals were examined twice daily throughout their life cycle from the neonate to third adult instar. In all three species, temperature exerted the most powerful influence on embryonic duration but there was also a smaller food effect. In D. gessneri,postembry-onic durations remained more or less the same at food levels 0.25 mgC/L but were influenced by temperature. At food concentrations of 0.1 mgC/L or lower, postembryonic durations became increasingly prolonged, particularly at high temperatures. This threshold concentration is affected by temperature: in D. gessneri,it was 0.1 mgC/L at 22oC and 27oC but higher at 32oC (between 0.25 and 0.50 mgC/L). At the same temperature of 27oC, the food threshold level varied between species: it was higher (0.25 mgC/L) for D. sarsiand lower (0.05 mgC/L) for M. reticulatacompared with D. gessneri(0.1 mgC/L). In both embryonic and postembryonic durations there is a body size effect as the absolute durations were longest in the largest species and shortest in the smallest species In all three species, prolongation of postembryonic duration at combinations of high temperature and lowered food levels was accompanied by increased number of juvenile instars.

The role of arl13b in cilia length regulation and in zebrafish development

RESUMO: Arl13b é uma importante proteína ciliar, presente em cílios primários e cílios móveis. Ratinhos mutantes para Arl13b têm comprimento dos cílios reduzido e defeitos nos B-túbulos dos cílios. Como consequência destes fenótipos, deficiências na Arl13b originam, em modelos animais, várias doenças congénitas, incluindo problemas no estabelecimento do eixo esquerda-direita, malformações cerebrais e deformações corporais. Nos seres humanos, deficiências na Arl13b levam a uma doença crónica congénita chamada Síndrome de Joubert. Por outro lado, a sobreexpressão de Arl13b origina cílios mais longos, no entanto existe uma ausência da caracterização dos fenótipos celulares e durante o desenvolvimento embrionário. Neste trabalho, quisemos explorar o efeito da sobre-expressão de Arl13b em embriões de peixezebra. Descobrimos que, ao nível ciliar, a sobre-expressão de Arl13b nas células aumenta o comprimento ciliar em cílios primários e móveis, no entanto, a esses cílios falta adequada acetilação da alfa-tubulina no citoesqueleto feito por microtúbulos. Os nossos resultados mostraram que esse efeito é específico de Arl13b sobre-expressão e quando se manipularam as enzimas responsáveis pela acetilação (Mec17) e pela de-acetilação (HDAC6) encontrámos uma sinergia potencial com ambas. Testámos ainda, que o aumento no comprimento ciliar não estava causalmente relacionado com a falta de acetilação, ou seja, os cílios com menos acetilação não eram necessariamente os mais longos. Também mostrámos que a sobre-expressão de Arl13b é capaz de restaurar o comprimento dos cílios em mutantes com cílios curtos e como isso pode ser explorado para um futuro potencial papel terapêutico para Arl13b. Em seguida, foi avaliado o impacto do aumento da quantidade de Arl13b no desenvolvimento embrionário do peixe-zebra. Observou-se que a sobre-expressão de Arl13b apresentava fenótipos muito fracos, quando comparados com a perda de função dos mutantes de Arl13b. Focados no inesperado fenótipo leve no estabelecimento do eixo esquerda-direita abordámos a questão através do estabelecimento de uma colaboração com matemáticos, descobrimos que os cílios mais longos que potencialmente têm a capacidade de movimentar mais fluido são atenuados por amplitudes de batimento menores, e, como resultado, estes longos cílios não prejudicam o movimento do fluido e consequentemente não afetam o estabelecimento dos padrões de esquerda-direita. Sugerimos assim que a Arl13b é um regulador chave, do comprimento ciliar. Descobrimos uma nova interação com as enzimas de acetilação/de-acetilação e levantamos novas hipóteses quanto aos mecanismos moleculares da função da Arl13b. Propomos um novo modelo para o mecanismo molecular da Arl13b na regulação do comprimento dos cílios onde podemos integrar os nossos resultados com os relatados na literatura. Este trabalho adiciona mais conhecimento para o mecanismo de ação da Arl13b e, portanto, fornece uma importante contribuição para o campo da investigação em cílios.---------------------------------------------------------------------------------------------------------------------- ABSTRACT: Arl13b is an important ciliary protein, present in primary and motile cilia. arl13b-/- mouse mutants have reduced cilia length and cilia B-tubule defects. As a consequence of these phenotypes, Arl13b loss of function animal models suffer from several congenital disorders including left-right problems, brain malformations and body deformations. In humans Arl13b depletion leads to a congenital chronic disease called Joubert Syndrome. On the other hand, overexpressing Arl13b leads to longer cilia but the characterization of the cellular and developmental phenotypes was missing. In this work we explore the effect of Arl13b overexpression in zebrafish embryos. We found that, at the ciliary level, Arl13b overexpression from 1 cell stage produces longer primary and motile cilia, but these cilia lack proper alpha tubulin acetylation of their microtubule cytoskeleton. Our results showed that this effect is specific from Arl13b overexpression and when we manipulated the enzymes responsible for acetylation, Mec17, and de-acetylation, HDAC6, we found a potential synergy of both mec17 knockdown and HDAC6 activity with Arl13b overexpression. We tested that the ciliary increase in length was not causally related to the lack of acetylation, meaning the more de-acetylated cilia were not necessarily the longer ones. We also showed that Arl13b overexpression is able to restore cilia length in short cilia mutants and how that may be explored to a potential future therapeutic role for Arl13b. Next, we evaluated the impact of increasing the amount of Arl13b in zebrafish embryonic development. We observed that Arl13b overexpression presented very mild phenotypes when compared to the loss of function mutants. We focused on the unexpected left-right mild phenotype and by establishing a mathematical modeling collaboration, we found out that the longer cilia generated force was attenuated by smaller beating amplitudes, and as a result, these long cilia were not impairing the cilia generated flow and the establishment of left-right patterning. We suggest that Arl13b is one key cilia length regulator. We disclosed a novel interaction with the acetylation / de-acetylation enzymes and raised new hypothesis as to the mechanisms of Arl13b function. We propose a new model for the Arl13b molecular mechanism of cilia length regulation where we integrate our findings with those reported in the literature. This work adds more knowledge to the Arl13b mechanism of action and therefore provides an important contribution to the cilia research field.

Development of biomimetic microengineered hydrogel fibers for tendon regeneration

Musculoskeletal diseases are one of the leading causes of disability worldwide. Tendon injuries are responsible for substantial morbidity, pain and disability. Tissue engineering strategies aim at translating tendon structure into biomimetic materials. The main goal of the present study is to develop microengineered hydrogel fibers through the combination of microfabrication and chemical interactions between oppositely charged polyelectrolytes. For this, methacrylated hyaluronic acid (MeHA) and chondroitin sulfate (MeCS) were combined with chitosan (CHT). Hydrogel fibers were obtained by injecting polymer solutions (either MeHA or MeHA/MeCS and CHT) in separate microchannels that join at a y-junction, with the materials interacting upon contact at the interface. To evaluate cell behavior, human tendon derived cells (hTDCs) were isolated from tendon surplus samples during orthopedic surgeries and seeded on top of the fibers. hTDCs adhered to the surface of the fibers, remaining viable, and were found to be expressing CD44, the receptor for hyaluronic acid. The synthesis of hydrogel fibers crosslinkable through both physical and chemical mechanisms combined with microfabrication technology allows the development of biomimetic structures with parallel fibers being formed towards the replication of tendon tissue architecture.

The Larval Development of Palaemonid Shrimps from the Amazon region reared In the laboratory. VII. Abbreviated development of Pseudopalaemon amazonensis Ramos-Porto, 1979 (Crustacea: Decapoda: Caridea)

Larval development of the freshwater shrimp Pseudopalaemon amazonensis Ramos-Porto was studied in the laboratory based on the offspring of ovigerous females collected in a small “terra-firme” forest stream near Manaus, Brazil. Ovigerous females with a mean total length of 36.5 ± 1.9 mm carried 13-19 eliptical, yolk-rich eggs measuring 2.55 ± 0.16 x 1.64 ± 0.11 mm. The larval period consisted of 3 benthie stages and the larvae accomplished metamorphosis after 7-8 days without feeding. The newly-hatched larva had sessile eyes and all appendages, except for the uropods; chelipeds were present as uniramous buds, but walking legs were fully developed and functional. Descriptions and illustrations of the 3 larval and first juvenile stages are presented.

Tendon regeneration through a scaffold-free approach: development of tenogenic magnetic hASCs sheets

Tendon's regeneration is limited, demanding for cell-based strategies to fully restore their functionality upon injury. The concept of magnetic force-based TE(1), generally using magnetic nanoparticles may enable, for example, stem cell stimulation and/or remote control over TE constructs. Thus, we originally propose the development of magnetic cell sheets (magCSs) with tenogenic capability, aimed at promoting tendon's regeneration. A Tenomodulin (TNMD+) subpopulation was sorted from human adipose stem cells (hASCs), using TNMD-coated immunomagnetic beads(2) and used as cell source for the development of magCSs. Briefly, cells were labeled with iron oxide composite particles (Micromod) and cultured for 7 days in α-MEM medium with or without magnetic stimulation provided by a magnetic device (nanoTherics). CSs were retrieved from the plates using magnet attraction as contiguous sheets of cells within its own deposited ECM.

Advancing tendon regeneration through the development of bio-stimulating tissue engineering approaches

Tendon tissue engineering (TE) requires tailoring scaffolds designs and properties to the anatomical and functional requirements of tendons located in different regions of the body. Cell sourcing is also of utmost importance as tendon cells are scarce. Recently, we have found that it is possible to direct the tenogenic differentiation of Amniotic fluid and Adipose tissue derived stem cells (hAFSCs and hASCs), and also that there are hASCs subpopulations that might be more prone to tenogenic differentiation. Nevertheless, biochemical stimulation may not be enough to develop functional TE substitutes for a tissue that is known to be highly dependent on mechanical loading.

Monitoring the early stiffness development in epoxy adhesives for structural strengthening

The present work aimed to assess the early-age evolution of E-modulus of epoxy adhesives used for Fibre-Reinforced Polymer (FRP) strengthening applications. The study involved adapting an existing technique devised for continuous monitoring of concrete stiffness since casting, called EMM-ARM (Elasticity Modulus Measurement through Ambient Response Method) for evaluation of epoxy stiffness. Furthermore, monotonic tensile tests according to ISO standards and cyclic tensile tests were carried out at several ages. A comparison between the obtained results was performed in order to better understand the performance of the several techniques in the assessment of stiffness of epoxy resins. When compared to the other methodologies, the method for calculation of E-modulus recommended by ISO standard led to lower values, since in the considered strain interval, the adhesive had a non-linear stress–strain relationship. The EMM-ARM technique revealed its capability in clearly identifying the hardening kinetics of epoxy adhesives, measuring the material stiffness growth during the entire curing period. At very early ages the values of Young׳s modulus obtained with quasi-static tests were lower than the values collected by EMM-ARM, due to the fact that epoxy resin exhibited a significant visco-elastic behaviour.

Development of benchmarks for operating costs and resources consumption to be used in healthcare building sustainability assessment methods

Since the last decade of the twentieth century, the healthcare industry is paying attention to the environmental impact of their buildings and therefore new regulations, policy goals and Buildings Sustainability Assessment (HBSA) methods are being developed and implemented. At the present, healthcare is one of the most regulated industries and it is also one of the largest consumers of energy per net floor area. To assess the sustainability of healthcare buildings it is necessary to establish a set of benchmarks related with their life-cycle performance. They are both essential to rate the sustainability of a project and to support designers and other stakeholders in the process of designing and operating a sustainable building, by allowing the comparison to be made between a project and the conventional and best market practices. This research is focused on the methodology to set the benchmarks for resources consumption, waste production, operation costs and potential environmental impacts related to the operational phase of healthcare buildings. It aims at contributing to the reduction of the subjectivity found in the definition of the benchmarks used in Building Sustainability Assessment (BSA) methods, and it is applied in the Portuguese context. These benchmarks will be used in the development of a Portuguese HBSA method.

Development of foam one-part geopolymers with enhanced thermal insulation performance and low carbon dioxide emissions

Buildings are responsible for more than 40% of the energy consumption and greenhouse gas emissions. Thus, increasing building energy efficiency is one the most cost-effective ways to reduce emissions. The use of thermal insulation materials could constitute the most effective way of reducing heat losses in buildings by minimising heat energy needs. These materials have a thermal conductivity factor, k (W/m.K) lower than 0.065 while other insulation materials such as aerated concrete can go up to 0.11. Current insulation materials are associated with negative impacts in terms of toxicity. Polystyrene, for example contains anti-oxidant additives and ignition retardants. In addition, its production involves the generation of benzene and chlorofluorocarbons. Polyurethane is obtained from isocyanates, which are widely known for their tragic association with the Bhopal disaster. Besides current insulation materials releases toxic fumes when subjected to fire. This paper presents experimental results on one-part geopolymers. It also includes global warming potential assessment and cost analysis. The results show that only the use of aluminium powder allows the production mixtures with a high compressive strength however its high cost means they are commercially useless when facing the competition of commercial cellular concrete. The results also show that one-part geopolymer mixtures based on 26%OPC +58.3%FA +8%CS +7.7%CH and 3.5% hydrogen peroxide constitute a promising cost efficient (67 euro/m3), thermal insulation solution for floor heating systems with low global warming potential of 443 KgCO2eq/m3.

Assessing the feasibility of impregnating phase change materials in lightweight aggregate for development of thermal energy storage systems

This paper assesses the feasibility of impregnation/encasement of phase change materials (PCMs) in lightweight aggregates (LWAs). An impregnation process was adopted to carry out the encasement study of two different PCMs in four different LWAs. The leakage of the impregnated/encased PCMs was studied when they were submitted to freeze/thawing and oven drying tests, separately. The results confirmed that, the impregnation/encasement method is effective with respect to the large thermal energy storage density, and can be suitable for applications were PCMs cannot be incorporated directly such as asphalt road pavements.

Development of sandwich panels of customized functionalities for the rehabilitation of the built patrimony

Considering that the future of the construction sector in most European countries will mainly lie in the renovation of the existing building stock, in the next coming years thousands of energy inefficient buildings will need renovation to force EU member states to reach the EU 2020 targets and implement the Energy Performance of Buildings Directive (EPBD). Seeing the actual crisis in the construction sector as an opportunity, this work aims to develop a concept for prefabricated customizable sandwich panels for the multifunctional renovation of buildings, focusing also on technological innovation. More than a conventional solution, this proposal aims to combine sustainable and recycled building materials, available technologies and systems with advanced design and manufacturing tools within an integrated and mass-customizable approach of advanced building renovation prefabricated solutions. The adoption of these new proposed solutions would improve the living standards of the inhabitants of our cities, reducing energy inefficiency and other existing construction/renovation problems, while enabling some advanced features like the incorporation of technical modules that could even monitor the building performance during its full lifetime and the living conditions of its occupants.