Intoxicação aguda com sementes de Crotalaria spectabilis (Leg. Papilionoideae) em suínos

Relata-se necrose hepatocelular em suínos após consumo de ração que continha grãos de sorgo-granífero (Sorghum bicolor) acidentalmente contaminado com sementes de Crotalaria spectabilis. Morreram 76 suínos em quatro propriedades no município de Juscimeira, MT. Os sinais clínicos iniciaram-se 24-48 horas após o consumo da ração contaminada e foram caracterizados por depressão, letargia, apatia, inapetência, vômito, mucosas ictéricas ou pálidas, ascite, decúbito esternal, decúbito lateral com movimentos de pedalagem e convulsões, a evolução clínica foi de 48-60 horas seguida de morte. As Principais alterações macroscópicas foram fígado aumentado de tamanho com evidenciação do padrão lobular, ascite e hidrotórax com líquido de coloração amarelo avermelhado contendo filamentos com aspecto de fibrina, linfonodos aumentados e edema pulmonar interlobular. A doença foi reproduzida utilizando-se 16 suínos divididos em seis grupos que receberam sementes de C. spectabilis em diferentes doses. Necrose hepatocelular ocorreu em sete suínos, sendo dois que receberam doses diárias 2,5g/kg e cinco que receberam doses únicas de 5,0 e 9,5g/kg. Dez doses diárias de 0,5 e 1,25g/kg causaram fibrose hepática.

Evaluation of tear production with modified Schirmer tear test-1 during the neonatal period in cats

The study aimed to evaluate tear production by means of modified Schirmer tear tes-1 (mSTT-1) in neonate cats. Likewise, correlation between mSTT-1 and STT-1 was assessed in vitro. Standard SST strips were cut in half and after eye lid opening, tear production of neonates (n=15) was daily measured in both eyes (mSTT-1), until the 7th day, and at day 14, 21, and 28. Animals were daily weighted until 28 days of age. Results were compared statistically (P<0.05). During the first 7 days, the overall mSTT-1 mean was 0.76 wetting/minute. Significant differences between right and left eyes were not observed at any time point (P=1.00). Tear secretion increased significantly, from the 14th to 28th day, in comparison with 7 first days (P<0.05). Positive correlation between maturity parameters and tear secretion was observed (P<0.0001). Distance between slopes of each strip changed significantly (P<0.0001). It was concluded that tear secretion in the neonatal period of cats is very below the reference values described for young and adults of the same species. It is not possible to extrapolate results obtained with mSTT-1 to standard STT-1.

Occurrence of infection with Toxoplasma gondii and factors associated with transmission in broiler chickens and laying hens in different raising systems

Toxoplasmosis is a zoonotic disease caused by the protozoan Toxoplasma gondii. The aim of the present study was to determine the occurrence and identify the risk factors associated with transmission of T. gondii to chickens raised in different systems (free-ranged and confined) to produce eggs or meat. The 810 animals were allocated in two experimental groups according to the production system purpose: 460 broiler chickens (Group 1) and 350 layer chickens (Group 2). In order to analyze the possible factors involved in T. gondii infection in the chickens, an epidemiological questionnaire was developed for all properties.The serological detection of anti-Toxoplasma gondii antibodies was performed by Indirect Immunofluorescence (IFAT) and by Enzime Linked Imunossorbent Assay (ELISA). Since the agreement index (kappa) between these two serological techniques was considered high, 21.2% of the 810 animals were considered reactive. In Group 1, 12.2% (56/460) were positive, while in the Group 2 the positivity rate was 33.1% (116/350). The production system may be influencing the seropositivity of the animals in both groups. However, only in Group 2 it was possible to notice a statistically significant relationship between the breeding system and the frequency of positive sera. This result indicates that, at least for laying hens, the production system is directly involved in T. gondii infection. The contact with cats in Group 1 did not influence the distribution of seroreactive animals, but in Group 2 a significant relationship was observed. The occurrence of anti-T. gondii antibodies was high in both groups (broiler and posture chickens). Free-ranged chickens raised for egg production proved to be the most exposed group to the T. gondii infection. This can be related to the fact that these animals stay for longer periods in the farms, in direct contact with possibly contaminated soil by the presence of domestic cats.

Kartongin reunaimeytymän hallittavuus

Kuppikartongin yksi tärkeimmistä ominaisuuksista on reunaimeytymän vastustuskyky, joka tulee olla riittävällä tasolla laadun takaamiseksi. Koska yksinkertainen juomakuppi on bulkki¬tuote, ei sen raakareunaa kannata taloudellisuuden vuoksi suojata tätä varten kehitellyillä menetelmillä vaan itse kartongin tulee vastustaa nesteitä riittävässä määrin. Tämän diplomityön tarkoituksena oli selvittää hydrofobointiin käytettävän massaliiman (hartsi) sekä pintaliiman joukkoon annosteltavan lisäaineen välinen optimaalinen suhde parhaan vastustuskyvyn saavuttamiseksi. Lisäksi selvitettiin joidenkin liimapuristimen ajo-olosuhteiden vaikutusta pintaliiman pick-upiin sekä koneen pH-tason oikeellisuus. Jauhatuksen vaikutusta tutkittiin lähinnä historiatietojen avulla. Tutkimus koostui viidestä tehdasmittakaavaisesta koeajosta, joiden avulla selvitettiin muuttujien vaikutus sisäisellä reunaimeytymän määritysmenetelmällä sekä määrittä¬mällä koepisteistä kulloinkin mielenkiinnon kohteena olleet kemikaalipitoisuudet. Viimeisen koeajon koepisteet jalostettiin lisäksi valmiiksi kupeiksi. Käytetty reunaimeytymän määritysmenetelmä osoittautui virhealttiiksi eivätkä raakakartongista tehtyjen määritysten tulokset korreloineet kovinkaan voimakkaasti PE-päällystettyjen näytteiden kanssa. Menetelmän kehitystä on viety eteenpäin tämän työn rinnalla ja työ jatkuu edelleen. Lisäksi kartongin hartsipitoisuusmääritysten tuloksista paljastui ristiriitaisuuksia, joiden vuoksi menetelmää uusittiin voimakkaasti. Reunaimeytymän vastustuksen riittävyydeksi koneella käytettävien massaliima-annosten tulee olla vähintään valitulla nollatasolla kaikissa kerroksissa ja pintaliiman lisäaine tulee pitää käytössä. Mikäli lisäaine jätetään pois käytöstä, tulee massaliima-annokset olla hyvin korkeita, eikä tämäkään takaa täysin reunaimeytymätöntä lopputuotetta. Lisäaineen ollessa käytössä ei suuremmalla massaliima-annoksella ole puolestaan merkittävää vaikutusta. Konetta ajetaan nykyisin hyvin alhaisella pH-tasolla, mutta tason nostaminen aiheuttaa selvän liimauksen heikkenemisen. Liimapuristimelle tulevan radan kosteudella ja pintaliiman kuiva-aineella ei näyttäisi olevan vaikutusta kartongin reunaimeytymän vastustuskykyyn. Myöskään taustakerroksen koivun jauhatusasteella ei ole merkitystä alueella, jolla koneella operoidaan. CTMP-massan jauhatuksen tulee sen sijaan olla riittävä, jotta keskikerrokseen ei synny yksittäisiä, pitkiä imeytymiä.

Comparative anatomical study of the leg's nerves of Cebus (barbed capuchins) with baboons, chimpanzees and modern humans

The anatomical comparative studies among the primates are important for the investigation of ethology, evolution, taxonomy, and comprehension of tools by hominoids. Especially the anatomical knowledge of Cebus contributes to conservation of the species, and to development of surgical procedures and clinical treatments of these animals, as they frequently are victims of automobile accidents. Recent anatomical studies came to a wrong conclusion regarding behavioral traits of Cebus, ascribed to few data available in previous literature. Therefore, to provide anatomical data and to support the other sciences related to anatomy, and to develop surgical and/or clinical procedures, we described the nerves of the legs of Cebus foccusing on their position and trajectory, as wll as innerved muscles, and compared these results with those of humans and other primates. Eight adult capuchin specimens were used for this study. The anatomical comparative study of the leg's nerves of Cebus demonstrated that, in general, structural organization of the nerves is similar among the four primates analyzed here (Cebus, chimpanzees, baboons and humans), which might be attributed to the fact that the all four primates have similar body structures. However, nerve trajectory and muscles innervation in Cebus was more similar to baboons.

Evaluation of resistance in a selected field strain of Haemonchus contortus to ivermectin and moxidectin using the Larval Migration on Agar Test

Haemonchus contortus is one of the most common and economically significant causes of disease in small ruminants worldwide, and the control programs of parasitic nematodes - including H. contortus - rely mostly on the use of anthelmintic drugs. The consequence of the use of this, as the sole sanitary strategy to avoid parasite infections, was the reduction of the efficacy of all chemotherapeutic products with a heavy selection for resistance. The widespread of anthelmintic resistance and the difficulty of its early diagnosis has been a major concern for the sustainable parasite management on farms. The objective of this research was to determine and compare the ivermectin (IVM) and moxidectin (MOX) effect in a selected field strain of H. contortus with a known resistance status, using the in vitro larval migration on agar test (LMAT). Third stage larvae of the selected isolate were obtained from faecal cultures of experimentally infected sheep and incubated in eleven increasing diluted concentrations of IVM and MOX (6, 12, 24, 48, 96, 192, 384, 768, 1536, 3072 and 6144µg/mL). The dose-response sigmoidal curves were obtained using the R² value of >0.90 and the lethal concentration (LC50) dose for the tested anthelmintic drugs using a four-parameter logistic model. The LC50 value for MOX was significantly lower than IVM (1.253µg/mL and 91.06µg/mL), identifying the H. contortus isolate as considerably less susceptible to IVM compared to MOX. Furthermore, the LMAT showed a high consistency (p<0.0001) and provided to be a useful diagnostic tool for monitoring the resistance status of IVM and MOX in H. contortus field isolate, as well as it may be used for official routine drug monitoring programs under the Ministry of Agriculture (MAPA) guidance.

Development and application of polymerase chain reaction test for detection of Conidiobolus lamprauges

Conidiobolomycosis is a granulomatous disease caused by the fungus Conidiobolus spp. in humans and animals. Traditional technique for diagnosis of the disease is isolation of the agent associated with the presence of typical clinical signs and pathological conditions. The aim of this study was to describe the development of a specific polymerase chain reaction (PCR) test for Conidiobolus lamprauges to detect the fungus in clinical samples. Samples from suspected animals were collected and submitted to isolation, histopathological analysis and amplification by PCR. DNA from tissues was subjected to PCR with fungi universal primers 18S rDNA gene, and specific primers were designed based on the same gene in C. lamprauges that generated products of about 540 bp and 222 bp respectively. The culture was positive in 26.6% of clinical samples. The PCR technique for C. lamprauges showed amplification of DNA from fresh tissues (80%) and paraffin sections (44.4%). In conclusion, the PCR technique described here demonstrated a high sensitivity and specificity for detection of fungal DNA in tissue samples, providing a tool for the rapid diagnosis of C. lamprauges.

Development of a Real-time PCR test for porcine group A rotavirus diagnosis

Group A Rotavirus (RVA) is one of the most common causes of diarrhea in humans and several animal species. A SYBR-Green Real-Time polymerase chain reaction (PCR) was developed to diagnose RVA from porcine fecal samples, targeting amplification of a 137-bp fragment of nonstructural protein 5 (NSP5) gene using mRNA of bovine NADH-desidrogenase-5 as exogenous internal control. Sixty-five samples were tested (25 tested positive for conventional PCR and genetic sequencing). The overall agreement (kappa) was 0.843, indicating 'very good' concordance between tests, presenting 100% of relative sensitivity (25+ Real Time PCR/25+ Conventional PCR) and 87.5% of relative sensitivity (35- Real Time PCR/40- Conventional PCR). The results also demonstrated high intra- and inter-assay reproducibility (coefficient of variation ≤1.42%); thus, this method proved to be a fast and sensitive approach for the diagnosis of RVA in pigs.

A survey of the generation of ocean waves in a test basin

At present stage the analytical design of wave tolerance for floating structures and vessels is still imperfect due to the mutually complex and nonlinear phenomena between structures and waves. Wave tolerance design is usually carried out through iterative evaluations of results from model tests in a wave basin, and this is done in order to reach a final structural design. The wave generation has then become an important technology in the field of the coastal and ocean engineering. This paper summarizes the facilities of a test basin and a wave maker in Japan and also surveys the methodology of the generation of ocean waves in a test basin.

A Test Bed Applied Mobile Robot Navigation

It is presented a test bed applied to studies on dynamics, control, and navigation of mobile robots. A cargo ship scale model was chosen, which can be radio-controlled or operated autonomously through an embedded control system. A control program, which manages on board mission execution, is implemented on a microcontroller. Navigation is based on an electronic compass, which includes automatic compensation for pitch and roll motions. Heading control loop is based on this sensor, and on a rudder positioning system. A propulsion control system is also implemented. Typical manoeuvres as the turning test and "zig-zag", were implemented and tested. They are included on a manoeuvre library, and can be accessed independently or in combined modes. The embedded system is also in charge of signal acquisition and storing during the missions. It is possible to analyse experiments on identification of ship dynamics, control, and navigation, through the data transferred to a PC by serial communication. Navigation is going to be improved by including inertial sensors on board, and a DGPS. Preliminary tests are aimed to ship identification, and manoeuvrability, using free model tests. Future steps include extending this system for developing other mobile robots as, ROVs, AUVs, and aerial vehicles.

Design of a Test Stand for a Centrifugal Compressor

The goal of the Master’s thesis is to design a test stand for a centrifugal compressor. Different theoretical aspects of flow parameters measurements and test rigs built for the similar purposes in other research units are described in the theoretical part of the work. The process of components selection and the description of chosen components are given in the second part of the thesis. Besides measuring and control stages, the designed test stand has a closed-loop piping, an aftercooler and a surge tank. Overview and layout of the test rig is presented in the last chapter of the work.

Atividade alelopática em folhas de Tachigali myrmecophyla (Leg. - Pap.)

O uso de espécies florestais com atividade alelopática pode assegurar aos sistemas agroflorestais maior estabilidade, notadamente em relação à redução das espécies de plantas daninhas. Os objetivos deste trabalho foram isolar e identificar substâncias químicas produzidas pelo Tachigali myrmecophyla (tachi-preto) e caracterizar a atividade alelopática sobre a germinação de sementes e o crescimento de plântulas de duas espécies de plantas daninhas. Os bioensaios foram realizados em condições controladas de 25 ºC e fotoperíodos de 12 horas para germinação e de 25 ºC e fotoperíodo de 24 horas para o desenvolvimento de radícula e hipocótilo. Os extratos brutos e as frações foram analisados em concentração de 1,0 e 0,5%, e a substância, em concentrações de 5, 10, 15 e 20 mg L-1. O processo de isolamento permitiu a identificação da substância química 4,5-diidroblumenol A. Essa substância evidenciou atividade alelopática, cujos efeitos variaram em função da concentração, da espécie de planta daninha e do parâmetro da planta analisado. A intensidade dos efeitos alelopáticos esteve positivamente associada à concentração, com os efeitos mais intensos observados na concentração de 20 mg L-1. Independentemente do parâmetro analisado, os efeitos foram de maior magnitude na planta malícia. Comparativamente, o desenvolvimento da radícula se mostrou mais sensível aos efeitos da substância que o desenvolvimento do hipocótilo e a germinação das sementes.

El Marco Común Europeo de Referencia: su utilidad en la planificación y evaluación de un test de comprensión de lectura de ELE

Eurooppalainen viitekehys ja sen hyödyllisyys espanjan luetun ymmärtämisen testin suunnittelussa ja arvioinnissa Tämän pro gradu -tutkielman tavoitteena oli tutkia Eurooppalaista viitekehystä espanjan luetun ymmärtämisen testin suunnittelun ja arvioinnin pohjana. Työn teoriaosa koostuu kahdesta pääaiheesta: Eurooppalaisesta viitekehyksestä ja vieraalla kielellä lukemisesta. Viitekehys on 2000-luvun alussa julkaistu Euroopan neuvoston projekti, jonka tarkoituksena on näyttää suunta modernille kielten opetukselle Euroopassa. Teoksen ehkä kuuluisin osa ovat kielitaitoa mittaavat taitotasot, perinteisen asteikon mukaisesti A1 – C2. Muun muassa juuri taitotasojen avulla eurooppalaista kielten opiskelua ja opetusta on voitu yhtenäistää – esimerkiksi eri maiden oppilaitosten tutkintoja, kielikursseja ja kielitestejä pystytään nykyään vertailemaan helposti. Vieraalla kielellä lukeminen on ollut erittäin suosittu tutkimuksen kohde jo pitkään. Tässä tutkielmassa esitellään muutamia vieraan kielen lukemisen teorioita (kuten skeemateoria), malleja (kuten Rumelhartin malli) ja strategioita (Mendoza Fillolan strategiat). Lisäksi käsitellään vieraalla kielellä lukemisen ongelmia ja sitä, miten vieraalla kielellä lukemista voidaan opettaa. Empiirisessä osassa kuvaillaan tutkimusta, johon osallistui 35 tutkimushenkilöä jotka jaettiin kolmeen vertailuryhmään. Keskeisessä osassa empiiristä osiota on, testitulosten lisäksi, kuvaus Eurooppalaisen viitekehyksen toimivuudesta espanjan luetun ymmärtämisen testin suunnittelussa ja arvioinnissa. Testin tuloksista päätellen ryhmistä selvästi parhaiten suoriutui ryhmä A, joka koostui kielikeskuksen opiskelijoista. Huomattiin myös, että B- ja C-ryhmien sisäisissä kokonaistuloksissa oli enemmän hajontaa kuin A:n tuloksissa. Tutkimuksesta saatujen kokemusten perusteella todettiin, että Eurooppalainen viitekehys sisältää melko hyödyllisiä yleisen tason ohjeita ja muita lähtökohtia tällaisen testin suunnittelua ja arviointia varten. Teosta tulisi kuitenkin kehittää – konkreettiset ja selkeät esimerkit ja ohjeet tekisivät siitä huomattavasti käyttökelpoisemman. Eurooppalainen viitekehys näkyy varmasti yhä enemmän tulevaisuuden kielten oppimisessa ja opetuksessa. Myös meillä Suomessa viitekehystä arvostetaan: lähivuosina muun muassa ylioppilaskokeiden arvosanat saavat rinnalleen viitekehyksessä määritellyt taitotasot.

Power semiconductor nonlinearities in active du/dt output filtering

This doctoral thesis introduces an improved control principle for active du/dt output filtering in variable-speed AC drives, together with performance comparisons with previous filtering methods. The effects of power semiconductor nonlinearities on the output filtering performance are investigated. The nonlinearities include the timing deviation and the voltage pulse waveform distortion in the variable-speed AC drive output bridge. Active du/dt output filtering (ADUDT) is a method to mitigate motor overvoltages in variable-speed AC drives with long motor cables. It is a quite recent addition to the du/dt reduction methods available. This thesis improves on the existing control method for the filter, and concentrates on the lowvoltage (below 1 kV AC) two-level voltage-source inverter implementation of the method. The ADUDT uses narrow voltage pulses having a duration in the order of a microsecond from an IGBT (insulated gate bipolar transistor) inverter to control the output voltage of a tuned LC filter circuit. The filter output voltage has thus increased slope transition times at the rising and falling edges, with an opportunity of no overshoot. The effect of the longer slope transition times is a reduction in the du/dt of the voltage fed to the motor cable. Lower du/dt values result in a reduction in the overvoltage effects on the motor terminals. Compared with traditional output filtering methods to accomplish this task, the active du/dt filtering provides lower inductance values and a smaller physical size of the filter itself. The filter circuit weight can also be reduced. However, the power semiconductor nonlinearities skew the filter control pulse pattern, resulting in control deviation. This deviation introduces unwanted overshoot and resonance in the filter. The controlmethod proposed in this thesis is able to directly compensate for the dead time-induced zero-current clamping (ZCC) effect in the pulse pattern. It gives more flexibility to the pattern structure, which could help in the timing deviation compensation design. Previous studies have shown that when a motor load current flows in the filter circuit and the inverter, the phase leg blanking times distort the voltage pulse sequence fed to the filter input. These blanking times are caused by excessively large dead time values between the IGBT control pulses. Moreover, the various switching timing distortions, present in realworld electronics when operating with a microsecond timescale, bring additional skew to the control. Left uncompensated, this results in distortion of the filter input voltage and a filter self-induced overvoltage in the form of an overshoot. This overshoot adds to the voltage appearing at the motor terminals, thus increasing the transient voltage amplitude at the motor. This doctoral thesis investigates the magnitude of such timing deviation effects. If the motor load current is left uncompensated in the control, the filter output voltage can overshoot up to double the input voltage amplitude. IGBT nonlinearities were observed to cause a smaller overshoot, in the order of 30%. This thesis introduces an improved ADUDT control method that is able to compensate for phase leg blanking times, giving flexibility to the pulse pattern structure and dead times. The control method is still sensitive to timing deviations, and their effect is investigated. A simple approach of using a fixed delay compensation value was tried in the test setup measurements. The ADUDT method with the new control algorithm was found to work in an actual motor drive application. Judging by the simulation results, with the delay compensation, the method should ultimately enable an output voltage performance and a du/dt reduction that are free from residual overshoot effects. The proposed control algorithm is not strictly required for successful ADUDT operation: It is possible to precalculate the pulse patterns by iteration and then for instance store them into a look-up table inside the control electronics. Rather, the newly developed control method is a mathematical tool for solving the ADUDT control pulses. It does not contain the timing deviation compensation (from the logic-level command to the phase leg output voltage), and as such is not able to remove the timing deviation effects that cause error and overshoot in the filter. When the timing deviation compensation has to be tuned-in in the control pattern, the precalculated iteration method could prove simpler and equally good (or even better) compared with the mathematical solution with a separate timing compensation module. One of the key findings in this thesis is the conclusion that the correctness of the pulse pattern structure, in the sense of ZCC and predicted pulse timings, cannot be separated from the timing deviations. The usefulness of the correctly calculated pattern is reduced by the voltage edge timing errors. The doctoral thesis provides an introductory background chapter on variable-speed AC drives and the problem of motor overvoltages and takes a look at traditional solutions for overvoltage mitigation. Previous results related to the active du/dt filtering are discussed. The basic operation principle and design of the filter have been studied previously. The effect of load current in the filter and the basic idea of compensation have been presented in the past. However, there was no direct way of including the dead time in the control (except for solving the pulse pattern manually by iteration), and the magnitude of nonlinearity effects had not been investigated. The enhanced control principle with the dead time handling capability and a case study of the test setup timing deviations are the main contributions of this doctoral thesis. The simulation and experimental setup results show that the proposed control method can be used in an actual drive. Loss measurements and a comparison of active du/dt output filtering with traditional output filtering methods are also presented in the work. Two different ADUDT filter designs are included, with ferrite core and air core inductors. Other filters included in the tests were a passive du/dtfilter and a passive sine filter. The loss measurements incorporated a silicon carbide diode-equipped IGBT module, and the results show lower losses with these new device technologies. The new control principle was measured in a 43 A load current motor drive system and was able to bring the filter output peak voltage from 980 V (the previous control principle) down to 680 V in a 540 V average DC link voltage variable-speed drive. A 200 m motor cable was used, and the filter losses for the active du/dt methods were 111W–126 W versus 184 W for the passive du/dt. In terms of inverter and filter losses, the active du/dt filtering method had a 1.82-fold increase in losses compared with an all-passive traditional du/dt output filter. The filter mass with the active du/dt method was 17% (2.4 kg, air-core inductors) compared with 14 kg of the passive du/dt method filter. Silicon carbide freewheeling diodes were found to reduce the inverter losses in the active du/dt filtering by 18% compared with the same IGBT module with silicon diodes. For a 200 m cable length, the average peak voltage at the motor terminals was 1050 V with no filter, 960 V for the all-passive du/dt filter, and 700 V for the active du/dt filtering applying the new control principle.