Switching frequency variation control in hysteresis PWM controller for IM drives using variable parabolic bands for current error space phasor

Variation of switching frequency over the entire operating speed range of an induction motor (M drive is the major problem associated with conventional two-level three-phase hysteresis controller as well as the space phasor based PWM hysteresis controller. This paper describes a simple hysteresis current controller for controlling the switching frequency variation in the two-level PWM inverter fed IM drives for various operating speeds. A novel concept of continuously variable hysteresis boundary of current error space phasor with the varying speed of the IM drive is proposed in the present work. The variable parabolic boundary for the current error space phasor is suggested for the first time in this paper for getting the switching frequency pattern with the hysteresis controller, similar to that of the constant switching frequency voltage-controlled space vector PWM (VC-SVPWM) based inverter fed IM drive. A generalized algorithm is also developed to determine parabolic boundary for controlling the switching frequency variation, for any IM load. Only the adjacent inverter voltage vectors forming a triangular sector, in which tip of the machine voltage vector ties, are switched to keep current error space vector within the parabolic boundary. The controller uses a self-adaptive sector identification logic, which provides smooth transition between the sectors and is capable of taldng the inverter up to six-step mode of operation, if demanded by drive system. The proposed scheme is simulated and experimentally verified on a 3.7 kW IM drive.

A new approach for fault location identification in transmission system using stability analysis and SVMs

This paper presents a new approach to the location of fault in the high voltage power transmission system using Support Vector Machines (SVMs). A knowledge base is developed using transient stability studies for apparent impedance swing trajectory in the R-X plane. SVM technique is applied to identify the fault location in the system. Results are presented on sample 3-power station, a 9-bus system illustrate the implementation of the proposed method.

An intelligent approach using support vector machines for monitoring and identification of faults on transmission systems

Power system disturbances are often caused by faults on transmission lines. When faults occur in a power system, the protective relays detect the fault and initiate tripping of appropriate circuit breakers, which isolate the affected part from the rest of the power system. Generally Extra High Voltage (EHV) transmission substations in power systems are connected with multiple transmission lines to neighboring substations. In some cases mal-operation of relays can happen under varying operating conditions, because of inappropriate coordination of relay settings. Due to these actions the power system margins for contingencies are decreasing. Hence, power system protective relaying reliability becomes increasingly important. In this paper an approach is presented using Support Vector Machine (SVM) as an intelligent tool for identifying the faulted line that is emanating from a substation and finding the distance from the substation. Results on 24-bus equivalent EHV system, part of Indian southern grid, are presented for illustration purpose. This approach is particularly important to avoid mal-operation of relays following a disturbance in the neighboring line connected to the same substation and assuring secure operation of the power systems.

Hardness of approximation results for the problem of finding the stopping distance in Tanner graphs

Tanner Graph representation of linear block codes is widely used by iterative decoding algorithms for recovering data transmitted across a noisy communication channel from errors and erasures introduced by the channel. The stopping distance of a Tanner graph T for a binary linear block code C determines the number of erasures correctable using iterative decoding on the Tanner graph T when data is transmitted across a binary erasure channel using the code C. We show that the problem of finding the stopping distance of a Tanner graph is hard to approximate within any positive constant approximation ratio in polynomial time unless P = NP. It is also shown as a consequence that there can be no approximation algorithm for the problem achieving an approximation ratio of 2(log n)(1-epsilon) for any epsilon > 0 unless NP subset of DTIME(n(poly(log n))).

Component Inventory Costs in an Assembly Problem with Uncertain Supplier Lead-Times

We present a generic study of inventory costs in a factory stockroom that supplies component parts to an assembly line. Specifically, we are concerned with the increase in component inventories due to uncertainty in supplier lead-times, and the fact that several different components must be present before assembly can begin. It is assumed that the suppliers of the various components are independent, that the suppliers' operations are in statistical equilibrium, and that the same amount of each type of component is demanded by the assembly line each time a new assembly cycle is scheduled to begin. We use, as a measure of inventory cost, the expected time for which an order of components must be held in the stockroom from the time it is delivered until the time it is consumed by the assembly line. Our work reveals the effects of supplier lead-time variability, the number of different types of components, and their desired service levels, on the inventory cost. In addition, under the assumptions that inventory holding costs and the cost of delaying assembly are linear in time, we study optimal ordering policies and present an interesting characterization that is independent of the supplier lead-time distributions.

Comparative study on damage identification from lso-Eigen-Value-Change contours and smeared damage model

The paper proposes two methodologies for damage identification from measured natural frequencies of a contiguously damaged reinforced concrete beam, idealised with distributed damage model. The first method identifies damage from Iso-Eigen-Value-Change contours, plotted between pairs of different frequencies. The performance of the method is checked for a wide variation of damage positions and extents. The method is also extended to a discrete structure in the form of a five-storied shear building and the simplicity of the method is demonstrated. The second method is through smeared damage model, where the damage is assumed constant for different segments of the beam and the lengths and centres of these segments are the known inputs. First-order perturbation method is used to derive the relevant expressions. Both these methods are based on distributed damage models and have been checked with experimental program on simply supported reinforced concrete beams, subjected to different stages of symmetric and un-symmetric damages. The results of the experiments are encouraging and show that both the methods can be adopted together in a damage identification scenario.

The Proto-Lucianic Problem in 1 Samuel

The Lucianic text of the Septuagint of the Historical Books witnessed primarily by the manuscript group L (19, 82, 93, 108, and 127) consists of at least two strata: the recensional elements, which date back to about 300 C.E., and the substratum under these recensional elements, the proto-Lucianic text. Some distinctive readings in L seem to be supported by witnesses that antedate the supposed time of the recension. These witnesses include the biblical quotations of Josephus, Hippolytus, Irenaeus, Tertullian, and Cyprian, and the Old Latin translation of the Septuagint. It has also been posited that some Lucianic readings might go back to Hebrew readings that are not found in the Masoretic text but appear in the Qumran biblical texts. This phenomenon constitutes the proto-Lucianic problem. In chapter 1 the proto-Lucianic problem and its research history are introduced. Josephus references to 1 Samuel are analyzed in chapter 2. His agreements with L are few and are mostly only apparent or, at best, coincidental. In chapters 3 6 the quotations by four early Church Fathers are analyzed. Hippolytus Septuagint text is extremely hard to establish since his quotations from 1 Samuel have only been preserved in Armenian and Georgian translations. Most of the suggested agreements between Hippolytus and L are only apparent or coincidental. Irenaeus is the most trustworthy textual witness of the four early Church Fathers. His quotations from 1 Samuel agree with L several times against codex Vaticanus (B) and all or most of the other witnesses in preserving the original text. Tertullian and Cyprian agree with L in attesting some Hebraizing approximations that do not seem to be of Hexaplaric origin. The question is more likely of early Hebraizing readings of the same tradition as the kaige recension. In chapter 7 it is noted that Origen, although a pre-Lucianic Father, does not qualify as a proto-Lucianic witness. General observations about the Old Latin witnesses as well as an analysis of the manuscript La115 are given in chapter 8. In chapter 9 the theory of the proto-Lucianic recension is discussed. In order to demonstrate the existence of the proto-Lucianic recension one should find instances of indisputable agreement between the Qumran biblical manuscripts and L in readings that are secondary in Greek. No such case can be found in the Qumran material in 1 Samuel. In the text-historical conclusions (chapter 10) it is noted that of all the suggested proto-Lucianic agreements in 1 Samuel (about 75 plus 70 in La115) more than half are only apparent or, at best, coincidental. Of the indisputable agreements, however, 26 are agreements in the original reading. In about 20 instances the agreement is in a secondary reading. These agreements are early variants; mostly minor changes that happen all the time in the course of transmission. Four of the agreements, however, are in a pre-Hexaplaric Hebraizing approximation that has found its way independently into the pre-Lucianic witnesses and the Lucianic recension. The study aims at demonstrating the value of the Lucianic text as a textual witness: under the recensional layer(s) there is an ancient text that preserves very old, even original readings which have not been preserved in B and most of the other witnesses. The study also confirms the value of the early Church Fathers as textual witnesses.