Modified Block Adaptive Predictive Coder For Speech Processing

This thesis investigated the potential use of Linear Predictive Coding in speech communication applications. A Modified Block Adaptive Predictive Coder is developed, which reduces the computational burden and complexity without sacrificing the speech quality, as compared to the conventional adaptive predictive coding (APC) system. For this, changes in the evaluation methods have been evolved. This method is as different from the usual APC system in that the difference between the true and the predicted value is not transmitted. This allows the replacement of the high order predictor in the transmitter section of a predictive coding system, by a simple delay unit, which makes the transmitter quite simple. Also, the block length used in the processing of the speech signal is adjusted relative to the pitch period of the signal being processed rather than choosing a constant length as hitherto done by other researchers. The efficiency of the newly proposed coder has been supported with results of computer simulation using real speech data. Three methods for voiced/unvoiced/silent/transition classification have been presented. The first one is based on energy, zerocrossing rate and the periodicity of the waveform. The second method uses normalised correlation coefficient as the main parameter, while the third method utilizes a pitch-dependent correlation factor. The third algorithm which gives the minimum error probability has been chosen in a later chapter to design the modified coder The thesis also presents a comparazive study beh-cm the autocorrelation and the covariance methods used in the evaluaiicn of the predictor parameters. It has been proved that the azztocorrelation method is superior to the covariance method with respect to the filter stabf-it)‘ and also in an SNR sense, though the increase in gain is only small. The Modified Block Adaptive Coder applies a switching from pitch precitzion to spectrum prediction when the speech segment changes from a voiced or transition region to an unvoiced region. The experiments cont;-:ted in coding, transmission and simulation, used speech samples from .\£=_‘ajr2_1a:r1 and English phrases. Proposal for a speaker reecgnifion syste: and a phoneme identification system has also been outlized towards the end of the thesis.

" Nonlinear Signal Processing of Electroencephalogram .' Application in the Study of Neurodynamics. "

Interfacings of various subjects generate new field ofstudy and research that help in advancing human knowledge. One of the latest of such fields is Neurotechnology, which is an effective amalgamation of neuroscience, physics, biomedical engineering and computational methods. Neurotechnology provides a platform to interact physicist; neurologist and engineers to break methodology and terminology related barriers. Advancements in Computational capability, wider scope of applications in nonlinear dynamics and chaos in complex systems enhanced study of neurodynamics. However there is a need for an effective dialogue among physicists, neurologists and engineers. Application of computer based technology in the field of medicine through signal and image processing, creation of clinical databases for helping clinicians etc are widely acknowledged. Such synergic effects between widely separated disciplines may help in enhancing the effectiveness of existing diagnostic methods. One of the recent methods in this direction is analysis of electroencephalogram with the help of methods in nonlinear dynamics. This thesis is an effort to understand the functional aspects of human brain by studying electroencephalogram. The algorithms and other related methods developed in the present work can be interfaced with a digital EEG machine to unfold the information hidden in the signal. Ultimately this can be used as a diagnostic tool.

Prevalence and distribution of Salmonella serotypes in marketed broiler chickens and processing environment in Coimbatore City of southern India

Broiler chicken is gaining popularity among the consumers of India. Since poultry is recognised as a leading food vehicle for Salmonella contamination, the prevalence and distribution of Salmonella serotypes in broiler chickens and processing environments of retail outlets has been studied. In the present study 214 samples of broiler chicken and 311 environmental samples from cage were analysed for the presence of Salmonella. Of the various body parts of live chicken analysed prevalence varied from 1.4% in cloacca to 6.9% in crop region. Environmental samples from the cage showed higher prevalence of Salmonella ranging from0 to 16.67%. Apart from Salmonella enteritidis, which was the predominant Salmonella serotype in the chickens as well as in the environmental samples, other serotypes such as S. bareilly, S. cerro, S. mbandaka and S. moladewere also encountered. The results of the research calls for strict hygiene standards for retail broiler chicken processing outlets

Truncated VP28 as oral vaccine candidate against WSSV infection in shrimp: An uptake and processing study in the midgut of Penaeus monodon

Several oral vaccination studies have been undertaken to evoke a better protection against white spot syndrome virus (WSSV), amajor shrimp pathogen. Formalin-inactivated virus andWSSV envelope protein VP28 were suggested as candidate vaccine components, but their uptake mechanism upon oral delivery was not elucidated. In this study the fate of these components and of live WSSV, orally intubated to black tiger shrimp (Penaeus monodon) was investigated by immunohistochemistry, employing antibodies specific for VP28 and haemocytes. The midgut has been identified as the most prominent site of WSSV uptake and processing. The truncated recombinant VP28 (rec-VP28), formalin-inactivated virus (IVP) and live WSSV follow an identical uptake route suggested as receptor-mediated endocytosis that starts with adherence of luminal antigens at the apical layers of gut epithelium. Processing of internalized antigens is performed in endo-lysosomal compartments leading to formation of supra-nuclear vacuoles. However, the majority of WSSV-antigens escape these compartments and are transported to the inter-cellular space via transcytosis. Accumulation of the transcytosed antigens in the connective tissue initiates aggregation and degranulation of haemocytes. Finally the antigens exiting the midgut seem to reach the haemolymph. The nearly identical uptake pattern of the different WSSV-antigens suggests that receptors on the apical membrane of shrimp enterocytes recognize rec-VP28 efficiently. Hence the truncated VP28 can be considered suitable for oral vaccination, when the digestion in the foregut can be bypassed

Processing And Frozen Storage Characteristics Of Ray Fillets

Rays, belonging to the class Elasmobranchii, constitute a major fishery in many states in India like Tamil Nadu, Gujarat, Andhra Pradesh, Kerala and Maharashtra. The estimated landings are 21,700 tonnes per annum. Even though the meat of rays is nutritious and free from bones and spines, there is little demand for fresh meat due to the presence of a high urea content. The landings are mainly used for salt curing which fetches only very low prices for the producers. Urea nitrogen constituted the major component (50.8%) of the non-protein nitrogen of the meat. An attempt has been made to standat-dize the processing steps to reduce the urea levels in the meat before freezing by using different simple techniques like dipping the fillets in stagnant chilled water, dipping in chilled running water and dipping in stirred chilled running water. It was found that meat dipped in stirred running water for two hours reduced the urea level of the meat by 62%. The yield of the lateral fin fillets and caudal fin fillets vary with the size of the ray. The drip loss during frozen storage is found to be more in the case of samples frozen stored after the treatment for urea removal by the method of stirring in running water. The samples treated in stagnant chilled water had the lowest drip loss. The total nitrogen was higher in samples treated in stagnant chilled water and lowest in the samples treated in stirred running water. The overall acceptability was high in the case of samples treated with stirred running water and frozen stored

A Framework of Statistical Machine Translator from English to Malayalam

In this paper we describe the methodology and the structural design of a system that translates English into Malayalam using statistical models. A monolingual Malayalam corpus and a bilingual English/Malayalam corpus are the main resource in building this Statistical Machine Translator. Training strategy adopted has been enhanced by PoS tagging which helps to get rid of the insignificant alignments. Moreover, incorporating units like suffix separator and the stop word eliminator has proven to be effective in bringing about better training results. In the decoder, order conversion rules are applied to reduce the structural difference between the language pair. The quality of statistical outcome of the decoder is further improved by applying mending rules. Experiments conducted on a sample corpus have generated reasonably good Malayalam translations and the results are verified with F measure, BLEU and WER evaluation metrics

DNA Sequence Representation methods

DNA sequence representation methods are used to denote a gene structure effectively and help in similarities/dissimilarities analysis of coding sequences. Many different kinds of representations have been proposed in the literature. They can be broadly classified into Numerical, Graphical, Geometrical and Hybrid representation methods. DNA structure and function analysis are made easy with graphical and geometrical representation methods since it gives visual representation of a DNA structure. In numerical method, numerical values are assigned to a sequence and digital signal processing methods are used to analyze the sequence. Hybrid approaches are also reported in the literature to analyze DNA sequences. This paper reviews the latest developments in DNA Sequence representation methods. We also present a taxonomy of various methods. A comparison of these methods where ever possible is also done

Utilization of prawn waste for chitinase production by the marine fungus Beauveria bassiana by solid state fermentation

Prawn waste, a chitinous solid waste of the shell®sh processing industry, was used as a substrate for chitinase production by the marine fungus Beauveria bassiana BTMF S10, in a solid state fermentation (SSF) culture. The process parameters in¯uencing SSF were optimized. A maximum chitinase yield of 248.0 units/g initial dry substrate (U/gIDS) was obtained in a medium containing a 5:1 ratio (w/v) of prawn waste/sea water, 1% (w/w) NaCl, 2.5% (w/w) KH2PO4, 425±600 lm substrate particle size at 27 °C, initial pH 9.5, and after 5 days of incubation. The presence of yeast extract reduced chitinase yield. The results indicate scope for the utilization of shell®sh processing (prawn) waste for the industrial production of chitinase by using solid state fermentation.

Valorization of date palm (Phoenix dactylifera) fruit processing by-products and wastes using bioprocess technology – Review

The date palm Phoenix dactylifera has played an important role in the day-to-day life of the people for the last 7000 years. Today worldwide production, utilization and industrialization of dates are continuously increasing since date fruits have earned great importance in human nutrition owing to their rich content of essential nutrients. Tons of date palm fruit wastes are discarded daily by the date processing industries leading to environmental problems. Wastes such as date pits represent an average of 10% of the date fruits. Thus, there is an urgent need to find suitable applications for this waste. In spite of several studies on date palm cultivation, their utilization and scope for utilizing date fruit in therapeutic applications, very few reviews are available and they are limited to the chemistry and pharmacology of the date fruits and phytochemical composition, nutritional significance and potential health benefits of date fruit consumption. In this context, in the present review the prospects of valorization of these date fruit processing by-products and wastes’ employing fermentation and enzyme processing technologies towards total utilization of this valuable commodity for the production of biofuels, biopolymers, biosurfactants, organic acids, antibiotics, industrial enzymes and other possible industrial chemicals are discussed

Developing a Child Friendly Text-to-Speech System

This paper discusses the implementation details of a child friendly, good quality, English text-to-speech (TTS) system that is phoneme-based, concatenative, easy to set up and use with little memory. Direct waveform concatenation and linear prediction coding (LPC) are used. Most existing TTS systems are unit-selection based, which use standard speech databases available in neutral adult voices.Here reduced memory is achieved by the concatenation of phonemes and by replacing phonetic wave files with their LPC coefficients. Linguistic analysis was used to reduce the algorithmic complexity instead of signal processing techniques. Sufficient degree of customization and generalization catering to the needs of the child user had been included through the provision for vocabulary and voice selection to suit the requisites of the child. Prosody had also been incorporated. This inexpensive TTS systemwas implemented inMATLAB, with the synthesis presented by means of a graphical user interface (GUI), thus making it child friendly. This can be used not only as an interesting language learning aid for the normal child but it also serves as a speech aid to the vocally disabled child. The quality of the synthesized speech was evaluated using the mean opinion score (MOS).

Natural Rubber Latex Filler Masterbatch by Soap Sensitised Coagulation-Preparation, Processing and Evaluation

Sensitisation of natural rubber latex by addition of a small quantity of an anionic surfactant prior to the addition of a coacervant results in quick coagulation. The natural rubber prepared by the novel coagulation method shows improved raw rubber characteristics, better cure characteristics in gum and carbon black filled compounds and improved mechanical properties as compared to the conventionally coagulated natural rubber. Compounds based on dried masterbatches prepared by the incorporation of fluffy carbon black in different forms of soap sensitised natural rubber latices such as fresh latex, preserved field latex, centrifuged latex and a blend of preserved field latex and skim latex show improved cure characteristics and vucanizate properties as compared to an equivalent conventional dry rubber-fluffy carbon black based compound. The latex masterbatch based vulcanizates show higher level of crosslinking and better dispersion of filler. Vulcanizates based on fresh natural rubber latex- dual filler masterbatches containing a blend of carbon black and silica prepared by the modified coagulation process shows very good mechanical and dynamic properties that could be correlated to a low rolling resistance. The carbon black/silica/nanoclay tri-filler - fresh natural rubber latex masterbatch based vulcanizates show improved mechanical properties as the proportion of nanoclay increased up to 5 phr. The fresh natural rubber latex based carbon black-silica masterbatch/ polybutadiene blend vulcanizates show superior mechanical and dynamic properties as compared to the equivalent compound vulcanizates prepared from the dry natural rubber-filler (conventional dry mix)/polybutadiene blends

Modellbasiertes Service Level Management verteilter Anwendungssysteme

Zur Senkung von Kosten werden in vielen Unternehmen Dienstleistungen, die nicht zur Kernkompetenz gehören, an externe Dienstleister ausgelagert. Dieser Prozess wird auch als Outsourcing bezeichnet. Die dadurch entstehenden Abhängigkeiten zu den externen Dienstleistern werden mit Hilfe von Service Level Agreements (SLAs) vertraglich geregelt. Die Aufgabe des Service Level Managements (SLM) ist es, die Einhaltung der vertraglich fixierten Dienstgüteparameter zu überwachen bzw. sicherzustellen. Für eine automatische Bearbeitung ist daher eine formale Spezifikation von SLAs notwendig. Da der Markt eine Vielzahl von unterschiedlichen SLM-Werkzeugen hervorgebracht hat, entstehen in der Praxis Probleme durch proprietäre SLA-Formate und fehlende Spezifikationsmethoden. Daraus resultiert eine Werkzeugabhängigkeit und eine limitierte Wiederverwendbarkeit bereits spezifizierter SLAs. In der vorliegenden Arbeit wird ein Ansatz für ein plattformunabhängiges Service Level Management entwickelt. Ziel ist eine Vereinheitlichung der Modellierung, so dass unterschiedliche Managementansätze integriert und eine Trennung zwischen Problem- und Technologiedomäne erreicht wird. Zudem wird durch die Plattformunabhängigkeit eine hohe zeitliche Stabilität erstellter Modelle erreicht. Weiteres Ziel der Arbeit ist, die Wiederverwendbarkeit modellierter SLAs zu gewährleisten und eine prozessorientierte Modellierungsmethodik bereitzustellen. Eine automatisierte Etablierung modellierter SLAs ist für eine praktische Nutzung von entscheidender Relevanz. Zur Erreichung dieser Ziele werden die Prinzipien der Model Driven Architecture (MDA) auf die Problemdomäne des Service Level Managements angewandt. Zentrale Idee der Arbeit ist die Definition von SLA-Mustern, die konfigurationsunabhängige Abstraktionen von Service Level Agreements darstellen. Diese SLA-Muster entsprechen dem Plattformunabhängigen Modell (PIM) der MDA. Durch eine geeignete Modelltransformation wird aus einem SLA-Muster eine SLA-Instanz generiert, die alle notwendigen Konfigurationsinformationen beinhaltet und bereits im Format der Zielplattform vorliegt. Eine SLA-Instanz entspricht damit dem Plattformspezifischen Modell (PSM) der MDA. Die Etablierung der SLA-Instanzen und die daraus resultierende Konfiguration des Managementsystems entspricht dem Plattformspezifischen Code (PSC) der MDA. Nach diesem Schritt ist das Managementsystem in der Lage, die im SLA vereinbarten Dienstgüteparameter eigenständig zu überwachen. Im Rahmen der Arbeit wurde eine UML-Erweiterung definiert, die eine Modellierung von SLA-Mustern mit Hilfe eines UML-Werkzeugs ermöglicht. Hierbei kann die Modellierung rein graphisch als auch unter Einbeziehung der Object Constraint Language (OCL) erfolgen. Für die praktische Realisierung des Ansatzes wurde eine Managementarchitektur entwickelt, die im Rahmen eines Prototypen realisiert wurde. Der Gesamtansatz wurde anhand einer Fallstudie evaluiert.

Organic potatoes for processing

Drei Feldversuche auf zwei Standorten (DFH: 51°4, 9°4’, BEL: 52°2’, 8°08’) wurden in den Jahren 2002 bis 2004 durchgeführt, um den Einfluss der Vorfrucht, des Vorkeimens, der N- und K-Düngung und der Sorte auf Nährstoffverfügbarkeit, Gesamt- und sortierte Knollenerträge sowie die Qualität von Kartoffeln und deren Eignung für die industrielle Verarbeitung zu Pommes frites und Chips zu untersuchen. Bestimmt wurden die N- und K-Verfügbarkeit im Boden, die N- und K-Aufnahme von Kraut und Knollen, gesamte Frisch- und Trockenmasseerträge, sortierte Frischmasseerträge für die Verarbeitung, sowie die Gehalte der Knollen an Trockensubstanz und reduzierenden Zuckern. In einer sensorischen Prüfung wurden Qualitätsparameter von Pommes frites (Aussehen/Farbe, Textur und Geschmack/Geruch) bewertet, die gewichtet in einen Qualitätsindex eingingen. Die Qualität der Chips wurde maschinell durch den L-Wert (Helligkeit) des Produktes quantifiziert. Der Gehalt des Bodens an mineralisiertem Nitrat-Stickstoff hing von der Vorfrucht und dem Jahr ab. Nach Erbsen wurden zum Auflaufen der Kartoffeln in den Versuchsjahren 2003 und 2004 (187 und 132 kg NO3-N ha-1) die höchsten NO3-N-Werte in 0-60 cm Boden gemessen verglichen mit Kleegras (169 bzw. 108 kg NO3-N ha-1 oder Getreide (112 kg bzw. 97 kg NO3-N ha-1), obgleich die Differenz nicht in allen Fällen signifikant war. Entsprechend wurden nach Erbsen die höchsten Knollen-Frischmasseerträge (414 und 308 dt ha-1) geerntet. Dasselbe galt für die Trockenmasserträge, was belegt, dass der Trockensubstanzgehalt der Knollen bei verbesserter N-Versorgung nicht im selben Maße sinkt, wie der Frischmasseertrag steigt. Das Vorkeimen der Pflanzknollen führte zu einer rascheren phänologischen Entwicklung im Jugendstadium der Pflanze, beschleunigter Trockenmassebildung des Krautes und einer früheren Einlagerung von Assimilaten vom Kraut in die Knollen. Obwohl die positive Wirkung des Vorkeimens auf den Gesamtertrag bis Ende Juli (+ 26 in 2003 bzw. 34 dt ha-1 in 2004) im Jahr ohne Krautfäuleepidemie von den nicht vorgekeimten Varianten bis zur Endernte im September kompensiert wurde, konnte in diesem Jahr durch Vorkeimen dennoch ein erhöhter Ertragsanteil (+ 12%) der besonders nachgefragten Übergrößen (>50 mm für Pommes frites) erzielt werden. Die durchschnittliche Knollenmasse reagierte positiv auf Vorkeimen (+ 5,4 g), Sortenwahl (Sorte Agria) und ein erhöhtes N-Angebot (Leguminosenvorfrucht). Generell wurde deutlich, dass die Knollengesamterträge unter den Bedingungen des Ökologischen Landbaus (geringe bis mittlere Nährstoffversorgung, verkürzte Vegetationsdauer) sehr stark vom Anbaujahr abhängen. Die Ergebnisse belegen jedoch, dass organisch-mineralische N-K-Düngung den sortierten Ertrag an Knollen für die Verarbeitung signifikant erhöht: Höchste Gesamt- und sortierte Knollenfrischmasseerträge wurden nach kombinierter N (Horngrieß) und mineralischer K- (Kaliumsulfat) Gabe erzielt (348 dt ha-1 im Durchschnitt von 2002-2004). Im Gegensatz dazu kann eine Wirkung von Stallmist auf den Ertrag im Jahr der Ausbringung nicht unbedingt erwartet werden. Steigende Erträge nach Stallmistdüngung wurden lediglich in einem von drei Versuchsjahren (+58 dt ha-1) festgestellt und ließen sich eher auf eine K- als eine N-Wirkung zurückführen. Die Ergebnisse belegen, dass die Sortenwahl eine entscheidende Rolle spielt, wenn die Kartoffeln für die industrielle Verarbeitung zu den oben genannten Produkten angebaut werden. Insgesamt kann festgestellt werden, dass Kartoffelknollen aus ökologischen Anbauverfahren ausreichend hohe Trockensubstanzgehalte aufweisen, um für die Verarbeitung zu Pommes frites (>19%) geeignet zu sein und ohne dass dadurch die Konsistenz des Endproduktes gefährdet würde. Der Trockensubstanzgehalt der Referenzsorte für Chips, „Marlen“, unterschritt das in der Literatur geforderte Minimum für Chips von 23% lediglich, wenn die kombinierte Horngrieß-Kaliumsulfatdüngung zur Anwendung kam. Die Trockensubstanzgehalte der Knollen konnten durch Vorkeimen signifikant gesteigert werden und der Effekt war besonders groß (+1.2% absolut) in dem Jahr mit frühem Auftreten der Krautfäule (Phytophthora infestans), d.h. verkürzter Vegetationszeit. Die Knollen-Trockensubstanzgehalte waren in zwei von drei Experimenten nach Lagerung höher (+0.4 und 0.5% absolut) als noch zur Ernte. Sorten der sehr frühen und frühen Reifegruppe wiesen den größten relativen Anstieg der Gehalte an reduzierenden Zuckern (Glukose und Fruktose) während der Lagerung auf. Den mittelfrühen Sorten „Agria“ und „Marena“ hingegen kann aufgrund des von ihnen erreichten höchsten Qualitätsstandards (Pommes frites) zur Ernte eine sehr gute Eignung für die Bedingungen des Ökologischen Landbaus unterstellt werden. Die durchgehend beste Chipseignung wies die mittelfrühe Referenzsorte „Marlen“ auf. Insgesamt konnte nachgewiesen werden, dass durch gezielte Sortenwahl der Trockensubstanzgehalt und die Konzentration reduzierender Zucker, sowie die Qualität der Endprodukte (Pommes frites und Chips) gezielt beeinflusst werden kann. Im Gegensatz dazu haben acker- und pflanzenbauliche Maßnahmen wie Düngung, Wahl der Vorfrucht und Vorkeimen der Pflanzknollen einen eher geringen Einfluss. Dementsprechend sollte der Landwirt versuchen, durch die Wahl der Sorte den hohen Anforderungen der Industrie an die Rohware gerecht zu werden.

On-line analytical processing with conceptual information systems

A conceptual information system consists of a database together with conceptual hierarchies. The management system TOSCANA visualizes arbitrary combinations of conceptual hierarchies by nested line diagrams and allows an on-line interaction with a database to analyze data conceptually. The paper describes the conception of conceptual information systems and discusses the use of their visualization techniques for on-line analytical processing (OLAP).

Reuse in the development process of TOSCANA systems

TOSCANA is a graphical tool that supports the human-centered interactive processes of conceptual knowledge processing. The generality of the approach makes TOSCANA a universal tool applicable to a variety of domains. Only the so-called conceptual scales have to be designed for new applications. The presentation shows how the use of abstract scales allows the reuse of formerly defined conceptual scales. Furthermore it describes how thesauri and conceptual taxonomies can be integrated in the generation of conceptual scales.