Apert syndrome: Factors involved in the cognitive development

Apert syndrome is characterized by craniosynostosis, symmetric syndactyly and other systemic malformations, with mental retardation usually present. The objective of this study was to correlate brain malformations and timing for surgery with neuropsychological evaluation. We also tried to determine other relevant aspects involved in cognitive development of these patients such as social classification of families and parents' education. Eighteen patients with Apert syndrome were studied, whose ages were between 14 and 322 months. Brain abnormalities were observed in 55.6% of them. The intelligence quotient or developmental quotient values observed were between 45 and 108. Mental development was related to the quality of family environment and parents' education. Mental development was not correlated to brain malformation or age at time of operation. In conclusion, quality of family environment was the most significant factor directly involved in mental development of patients with Apert syndrome.

Influence of light curing source on microhardness of composite resins of different shades

Introduction: The evolution of light curing units can be noticed by the different systems recently introduced. The technology of LED units promises longer lifetime, without heating and with production of specific light for activation of camphorquinone. However, further studies are still required to check the real curing effectiveness of these units. Purpose: This study evaluated the microhardness of 4 shades (B-0.5, B-1, B-2 and B-3) of composite resin Filtek Z-250 (3M ESPE) after light curing with 4 light sources, being one halogen (Ultralux - Dabi Atlante) and three LED (Ultraled - Dabi Atlante, Ultrablue - DMC and Elipar Freelight - 3M ESPE). Methods: 192 specimens were distributed into 16 groups, and materials were inserted in a single increment in cylindrical templates measuring 4mm x 4mm and light cured as recommended by the manufacturer. Then, they were submitted to microhardness test on the top and bottom aspects of the cylinders. Results: The hardness values achieved were submitted to analysis of variance and to Tukey test at 5% confidence level. It was observed that microhardness of specimens varied according to the shade of the material and light sources employed. The LED appliance emitting greater light intensity provided the highest hardness values with shade B-0.5, allowing the best curing. On the other hand, appliances with low light intensity were the least effective. It was also observed that the bottom of specimens was more sensitive to changes in shade. Conclusion: Light intensity of LED light curing units is fundamental for their good functioning, especially when applied in resins with darker shades.

Longitudinal photographic observation of the occurrence of bubbles in pit and fissure sealants

The purpose of this study was to employ photographic evaluation to observe the presence or absence of bubbles in pit and fissure sealants Concise and Prisma Shield, at 7 days, 18 months, 36 months and 11 years after accomplishment of treatment. Methods: A hematoxylin-based staining solution was applied to the occlusal surface at the study periods, which allowed assessment of the sealing material on the surface. All occlusal surfaces were photographed and the photographs corresponding to each period were subjected to photographic evaluation. Results: There was statistically significant difference only at 18 months, with a significantly higher number of specimens with bubbles for the Prisma Shield sealant compared to the Concise, whereas the groups were similar at all other study periods. On the other hand, separate analysis of subsequent periods of the sealants did not reveal any significant difference. Conclusions: According to the results of the present longitudinal investigation, it may be concluded that the sealing materials showed that bubbles came into and went out with time. However, this fact did not interfere with its clinical purpose, provided the remaining material covers the expected region of pits and fissures.

Desenvolvimento de núcleos de Apis mellifera alimentados com suplemento aminoácido vitamínico, Promotor L

The development in the area of creates was studied of 14 nuclei with four mass off cells from the division of nine beehives of africanized Apis mellifera honeybees, distributed in two treatments: TPL - nuclei fed with inverted sugar + 3.5ml of the vitaminic amino acid supplement (Promotor L® ), composition for six nuclei and TAI - nuclei fed with composed inverted sugar for eight nuclei. The nuclei had been fed weekly in individual feeder's type tray, and the evaluations carried through in four periods, totalizing 74 days. The treatments had not presented significant difference, being that, number the TPL presented area of creates inferior to TAI (233.63 versus. 273.02cm 2, respectively). How much to the periods the four was superior (P<0.05) to the first and as second, being that the third did not present significant difference (P<0.05) in relation to the others. The use of the TAI was economically more favorable in relation to the TPL in R$0.21 in relation to the cost for production of 1kg of food.

Atributos químicos do solo e produtividade do milho afetados por corretivos e manejo do solo

A field experiment was carried out in the Lageado Experimental Farm belonging to the São Paulo State University - UNESP, Campus of Botucatu, SP, in a distrophic Nitosoil in 1997/98. The objective was to compare the effects of magnesium termophosphate; termophosphate + lime; termophosphate + phosphogypsum + sugarcane vinnace application on the chemical characteristics of the soil and on the corn (Zea mays L.) yield cultivated in no-tillage and conventional tillage systems. The Crotalaria juncea was cultivated as mulch-producing to make possible the establishment of the tillage systems. The mean modifications in the soil fertility were due to aplication of the magnesium termophosphate. The differences between the two tillage systems, related to crop productivity, were associated to the smaller N content in the corn leaf in the no-tillage system.

Calling sites and acoustic partitioning in species of the Hyla nana and rubicundula groups (Anura, Hylidae)

We analysed spatial and acoustic partitioning among four species of Hyla belonging to two species-groups: nana (H. nana and H. sanborni) and rubicundula (H. elianeae and H. jimi). Field activities were conducted at three permanent ponds, from 1998 through 2001. Four attributes of the calling sites were analysed: perch height, distance of the perch from the edge of the pond, type of perch (vegetation) and the individual's position on the perch. There was extensive overlap in the four calling-site variables analysed. However, we found spatial segregation did occur in calling site height and the distance of perches from pond edges. Bioacoustic analyses revealed behavioural differences among species in calling activity, both time of onset and peak calling in chorus. There was acoustic partitioning among species the fundamental frequency of the advertisement calls, principally as a function of the temporal structure (e.g. note duration, rate of note repetition, duration and rate of repetition of the calling pulses). We propose that differences in physical attributes of calling site and in characteristics of calls allow these species to exist in sympatry.

Regional hydroclimatic variability and Brazil's 2001 energy crisis

Purpose - This paper seeks to address the issue of persistent and widespread drought conditions during 2000 and 2001, which were the apparent cause of the decline of water levels in the reservoirs of Brazilian hydroelectric power plants. Design/methodology/approach - This issue is addressed here through a case study of the hydroclimatology of the Paraíba river basin, in Southeast Brazil, home to four large multi-purpose operational reservoirs. Findings - The data analysis shows that neither changes in the frequency nor magnitude of extreme hydrological events (droughts and floods) nor in annual rainfall amounts can be detected from the existing climate record. The explanation is consistent with the fact that the terrestrial water and energy cycles are tightly, and non-linearly, coupled through evapotranspiration. Research limitations/implications - Therefore small change in the seasonality of rainfall can have a significant impact on the basin's overall hydrologic regime, and thus on the availability of water resources. Originality/value - Often, adaptation and resilience to climate variability are discussed in the context of catastrophic events such as floods and droughts. This study suggests that a different type of impacts, those associated with subtle, yet persistent changes of seasonality in the terrestrial water cycle, cannot be ignored in studies of long-term sustainability of water resources. © Emerald Group Publishing Limited.

Velocardiofacial syndrome with a rare t(2;22)

Rearrangements involving chromosomes 2 and 22 were described not only as acquired abnormalities in a variety of human neoplasias but also in the constitutional karyotype suggesting the existence of a greater fragility in some specific regions in these chromosomes. Patients with DiGeorge and Velocardiofacial syndromes have a deletion on 22q11 leading to haploinsufficiency for one or more gene(s). We report a patient with velocardiofacial syndrome in which cytogenetic and fluorescence in situ hybridization analysis showed a rare t(2;22) and deletion in the 22q11 region. © 2007 Lippincott Williams & Wilkins, Inc.

Paracoccidioidomycosis: No genetic damage in human peripheral blood cells of patients assessed by single-cell gel (comet) assay

Paracoccidioidomycosis is a systemic fungal infection caused by Paracoccidioides brasiliensis. As infectious diseases can cause DNA damage, the authors aimed at analyzing DNA breakage in peripheral blood cells of patients with paracoccidioidomycosis by using the comet assay. The results suggested that paracoccidioidomycosis does not cause genotoxicity.

Measurement of sealant surface area by clinical/computerized analysis: 11-year results.

OBJECTIVE: To analyze the clinical behavior of 2 pit and fissure sealants through clinical/computerized evaluation. METHOD AND MATERIALS: Occlusal sealants were placed on maxillary and mandibular first and second premolars according to a split-mouth design. All premolars were sealed with either Concise (3M Espe) or Prisma Shield (Caulk/Dentsply) sealant agents. A hematoxylin-based staining solution was applied on the occlusal surface 7 days, 18 months, 36 months, and 11 years after occlusal sealing to allow checking of the sealant material on the surface. At each analysis time all occlusal surfaces were photographed, and the photographs corresponding to each time period were analyzed with SigmaScan 4.0 Software. The alterations of the sealed area of each sealant were analyzed with the software and recorded. Next, the measurements of the areas were tabulated and analyzed according to each period. Analysis of variance (ANOVA), with parts subdivided into time, and the t test, with a significance level of 5%, were used. RESULTS: The greatest sealed area was maintained by the sealant Concise. However, over the course of 11 years, all sealants began to show the same level of alteration in sealed area. CONCLUSION: The sealing materials showed alteration in sealed area over time, but they were efficient in controlling caries lesion formation on premolar pits and fissures.

Fatty acid production by four strains of Mucor hiemalis grown in plant oil and soluble carbohydrates

Four Mucor hiemalis strains (M1, M2, M3 and M4), isolated from soil at a depth of 0 - 15 cm in the Juréia-Itatins Ecology Station (JIES), in the state of São Paulo, Brazil and were evaluated for the production of γ-linolenic (GLA) and other unsaturated fatty acids. Five growth variables (temperature, pH, carbon source, nitrogen source, and vegetable oils) were studied. Liquid media containing 2% vegetable oil (palm oil, canola oil, soybean oil, sesame oil, or sunflower oil) or 2% carbohydrate (fructose, galactose, glycerol, glucose, lactose, maltose, sucrose, sorbitol or xylose) and 1% yeast extract as a nitrogen source were used. The greatest biomass production was observed with M3 and M4 strains in palm oil (91.5 g l -1) and sunflower oil (68.3 g l -1) media, respectively. Strain M4 produced greater quantities of polyunsaturated acids in medium containing glucose. The GLA production in the M4 biomass was 1,132.2 mg l -1 in glucose medium. Plant oils were inhibitors of fatty acid production by these strains. © 2007 Academic Journals.

Uso de indicadores hidrológicos para classificação de trechos de estradas florestais quanto ao escoamento superficial

Forest roads are frequently pointed as source of environmental problems related to erosion and they also influence harvest cost due to maintenance operations. Roads not well designed are sources of hydrological problems on catchments and the current attention to sustainability of forest exploration projects point out to the need of diagnostics tools for guiding the redesign of the road system. At this study, runoff hydrological indicators for forest road segments were assessed in order to identify critical points of erosion and water concentration on soils. A road network of a forest production area was divided into 252 road segments that were used as observations of four variables: mean terrain slope, main segment slope, LS factor and topographic index. The data analysis was based on descriptive statistics for outliers' identification, principal component analysis and for variability study between variables and between observations, and cluster analysis for similar segments groups' identification. The results allowed classifying roads segments into five mains road types: road on the ridge, on the valley, on the slopes, on the slopes but in a contour line and on the steepest slope. The indicators were able to highlight the most critical segments that differ of others and are potential sources of erosion and water accumulation problems on forest roads. The principal component analysis showed two main variability sources related to terrain topographic characteristics and also road design, showing that indicators represent well those elements. The methodology seems to be appropriated for identification of critical road segments that need to be redesigned and also for road network planning at new forest exploration projects.

The generation of scenes in mixed reality environments using the chromakey technique

A classic problem in the development of Mixed Reality systems is the registration. The correct alignment between virtual objects and the real elements is extremely important for the coherent composition of the resultant scene. Considering this context, this paper describes an approach for the composition of scenes in Mixed Reality environments using the chromakey technique for the extraction of real objects. After that, the scene is mounted in a coherent way related to the depth in OpenGL framebuffer for posterior rendering. ©2007 IEEE.

Avaliação da remoção de sedimentos pela operação de nivelamento de estradas florestais

The forest roads construction inevitably causes environmental impacts to adjacent ecosystems and streams. Also the routine activities of roads maintenance may similarly cause environmental impacts of about the same magnitude. The material scraped from the roadway by the motor grader is usually distributed along the roadsides, from where it may easily be washed out toward the streams. Therefore, quantifying the amount of sediments removed during road maintenance activities may provide important information of this stream sedimentation potential. For this purpose, three forest roads were divided in 30 m long segments, marked with leveled stakes. A nylon thread was then stretched across the leveled stakes and the distance from the nylon thread to the road surface was measured before and after the mechanical scraping of the road. The average removal of sediments was of 2,13 cm. Considering the mean density of soil 1,6 g cm -3, the average removal of sediments was of 341 t ha -1 of road. Considering still a 3,9 m wide and 150 m long road as an example, the total amount of removed sediments would be around 19,9 t. Road maintenance, therefore, must be well planned in order to avoid or minimize stream sedimentation.