Análisis prospectivo del despliegue de redes de comunicaciones móviles LTE en nuevas bandas de frecuencia mediante el desarrollo de modelos tecnoeconómicos

El estándar LTE se ha posicionado como una de las claves para que los operadores de telecomunicación puedan abordar de manera eficiente en costes el crecimiento de la demanda de tráfico móvil que se prevé para los próximos años, al ser una tecnología más escalable en el núcleo de la red y más flexible en la interfaz radio que sus predecesoras. En este sentido, es necesario también que los reguladores garanticen un acceso al espectro radioeléctrico adecuado, equitativo y no discriminatorio, que permita un entorno estable para el despliegue de redes de comunicaciones móviles avanzadas. Además de la flexibilización del marco regulador del espectro radioeléctrico en Europa, que ha permitido el despliegue de nuevas tecnologías en las bandas de frecuencia históricas de GSM, se ha puesto a disposición espectro adicional para sistemas IMT en nuevas bandas de frecuencia, lo que ha planteando a su vez nuevos retos para la tecnología y la regulación. La fragmentación del espectro disponible para comunicaciones móviles ha impulsado el desarrollo de técnicas de agregación de portadoras en las nuevas versiones del estándar LTE, que permiten explotar mejor los recursos radio en su conjunto. No obstante, el espectro inferior a 1 GHz sigue siendo escaso, ya que el tráfico móvil aumenta y la banda de 900 MHz aún se utiliza para servicios GSM, lo que no ha conseguido sino agravar la disputa entre los servicios de radiodifusión terrestre y de comunicaciones móviles por la parte superior de la banda UHF. En concreto, la banda de 700 MHz se perfila como una de las próximas para aumentar el espectro disponible para los servicios en movilidad, si bien su liberación por parte de las actuales redes de Televisión Digital Terrestre presenta no pocas dificultades en los Estados miembros en los que ésta es la principal plataforma audiovisual de acceso gratuito, abriendo un debate sobre el modelo audiovisual a largo plazo en Europa. Por otro lado, las políticas públicas de promoción del acceso a la banda ancha rápida y ultrarrápida de la presente década han establecido objetivos ambiciosos para el año 2020, tanto en el ámbito europeo como en los diferentes Estados miembros. La universalización del acceso a redes de banda ancha de al menos 30 Mbps constituye uno de los principales retos. Las expectativas generadas por la tecnología LTE y la puesta a disposición de nuevas bandas de frecuencia hace posible que los servicios de acceso fijo inalámbrico adquieran especial relevancia ante los objetivos de política pública establecidos que, como ha sido reconocido en diversas ocasiones, no podrán lograrse sino con un compendio de diferente tecnologías. Para esta Tesis Doctoral se han desarrollado una serie modelos tecnoeconómicos con el objetivo de realizar un análisis prospectivo que evalúa tres casos de especial relevancia en el despliegue de redes LTE: en primer lugar, la valoración económica de la banda de 700 MHz; en segundo lugar, la evaluación de modelos de negocio y reducción de costes considerando tecnologías femtocelulares; y finalmente, la viabilidad de las redes LTE de acceso fijo inalámbrico para el cierre de la brecha digital en el acceso a la banda ancha de 30 Mbps. En relación con la aplicación del análisis tecnoeconómico para la valoración del espectro de 700 MHz, los resultados obtenidos ponen de manifiesto dos cuestiones fundamentales. En primer lugar, la necesidad de asignar a los operadores más espectro para satisfacer las previsiones de demanda de tráfico móvil a medio plazo. En segundo, existe una diferencia notable en los costes de despliegue de una red LTE cuando se dispone de espectro en frecuencias inferiores a 1 GHz y cuando no, pero esta diferencia de costes disminuye a medida que se añade nuevo espectro sub-1GHz. De esta manera, la atribución de la banda de 700 MHz a servicios de comunicaciones móviles supone una reducción relevante en los costes de despliegue si el operador no dispone de espectro en la banda de 800 MHz, pero no así si ya dispone de espectro en bandas bajas para el despliegue. En este sentido, puede concluirse que el precio que los operadores estarán dispuestos a pagar por el espectro de la banda de 700 MHz dependerá de si ya tienen disponible espectro en la banda de 800 MHz. Sin embargo, dado que la competencia por ese espectro será menor, los ingresos esperables en las licitaciones de esta nueva banda serán en general menores, a pesar de que para algunos operadores este espectro sería tan valioso como el de 800 MHz. En segundo lugar, en relación con el despliegue de femtoceldas pueden extraerse algunas conclusiones en términos de ahorro de costes de despliegue y también de cara a la viabilidad de los modelos de negocio que posibilitan. El ahorro que supone la introducción de femtoceldas en el despliegue de una red LTE frente al caso de un despliegue exclusivamente macrocelular se ha demostrado que es mayor cuanto menor es el ancho de banda disponible para la red macrocelular. En esta línea, para un operador convergente el despliegue de femtoceldas tiene sentido económico si el ancho de banda disponible es escaso (en torno a 2x10 MHz), que, en el caso de España, puede reflejar el caso de los operadores del segmento fijo que son nuevos entrantes en el móvil. Por otro lado, los modelos de acceso abierto son interesantes para operadores exclusivamente móviles, porque consiguen flexibilizar los costes sustituyendo estaciones base macrocelulares por el despliegue de femtoceldas, pero necesitan desplegarse en zonas con una densidad de población relativamente elevada para que éstas descarguen tráfico de varios usuarios de la red macrocelular simultáneamente. No obstante, las femtoceldas son beneficiosas en todo caso si es el usuario quien asume los costes de la femtocelda y el backhaul, lo que sólo parece probable si se integran en el modelo de negocio de comercialización de nuevos servicios. Por tanto, el despliegue de femtoceldas en buena parte de la casuística estudiada sólo tiene sentido si consiguen aumentar los ingresos por usuario comercializando servicios de valor añadido que necesiten calidad de servicio garantizada y exploten a la vez de esa forma su principal ventaja competitiva respecto a la tecnología WiFi. Finalmente, en relación con el papel de la tecnología LTE para la provisión de servicios de acceso fijo inalámbrico para la banda ancha de 30 Mbps, se ha desarrollado un modelo TD-LTE y mediante la metodología de análisis tecnoeconómico se ha realizado un estudio prospectivo para el caso de España. Los resultados obtenidos preciden una huella de cobertura de FTTH del 74% para 2020, y demuestran que una red TD-LTE en la banda de 3,5 GHz resulta viable para aumentar la cobertura de servicios de 30 Mbps en 14 puntos porcentuales. Junto con la consideración de la cobertura de otras redes, la cobertura de 30 Mbps de acuerdo a la viabilidad de los despliegues alcanzaría el 95% en España en el año 2020. Como resumen, los resultados obtenidos muestran en todos los casos la capacidad de la tecnología LTE para afrontar nuevos desafíos en relación con el aumento del tráfico móvil, especialmente crítico en las zonas más urbanas, y el cierre de la brecha digital en el acceso a la banda ancha rápida en las zonas más rurales. ABSTRACT The LTE standard has been pointed out as one of the keys for telecom operators to address the demand growth in mobile traffic foreseen for the next years in a cost-efficient way, since its core network is more scalable and its radio interface more flexible than those of its predecessor technologies. On the other hand, regulators need to guarantee an adequate, equitable and non-discriminatory access to radio spectrum, which enable a favorable environment for the deployment of advanced mobile communication networks. Despite the reform of the spectrum regulatory framework in Europe, which allowed for the deployment of new technologies in the historic GSM bands, additional spectrum has been allocated to IMT systems in new frequency bands, what in turn has set out new challenges for technology and regulation. The current fragmentation of available spectrum in very different frequency bands has boosted the development of carrier aggregation techniques in most recent releases of the LTE standard, which permit a better exploitation of radio resources as a whole. Nonetheless, spectrum below 1 GHz is still scarce for mobile networks, since mobile traffic increases at a more rapid pace than spectral efficiency and spectrum resources. The 900 MHz frequency band is still being used for GSM services, what has worsen the dispute between mobile communication services and terrestrial broadcasting services for the upper part of the UHF band. Concretely, the 700 MHz frequency band has been pointed out as one of the next bands to be allocated to mobile in order to increase available spectrum. However, its release by current Digital Terrestrial Television networks is challenging in Member States where it constitutes the main free access audiovisual platform, opening up a new debate around the audiovisual model in the long term in Europe. On the other hand, public policies of the present decade to promote fast and ultrafast broadband access has established very ambitious objectives for the year 2020, both at European and national levels. Universalization of 30 Mbps broadband access networks constitutes one of the main challenges. Expectations raised by LTE technology and the allocation of new frequency bands has lead fixed wireless access (FWA) services to acquire special relevance in light of public policy objectives, which will not be met but with a compendium of different technologies, as different involved stakeholders have acknowledged. This PhD Dissertation develops techno-economic models to carry out a prospective analysis for three cases of special relevance in LTE networks’ deployment: the spectrum pricing of the 700 MHz frequency band, an assessment of new business models and cost reduction considering femtocell technologies, and the feasibility of LTE fixed wireless access networks to close the 30 Mbps broadband access gap in rural areas. In the first place and regarding the application of techno-economic analysis for 700 MHz spectrum pricing, obtained results reveal two core issues. First of all, the need to allocate more spectrum for operators in order to fulfill mobile traffic demand in the mid-term. Secondly, there is a substantial difference in deployment costs for a LTE network when there is sub-1GHz spectrum available and when there is not, but this difference decreases as additional sub-1GHz spectrum is added. Thus, the allocation of 700 MHz band to mobile communication services would cause a relevant reduction in deployment costs if the operator does not count on spectrum in the 800 MHz, but not if it already has been assigned spectrum in low frequencies for the deployment. In this regard, the price operators will be willing to pay for 700 MHz spectrum will depend on them having already spectrum in the 800 MHz frequency band or not. However, since competition for the new spectrum will not be so strong, expected incomes from 700 MHz spectrum awards will be generally lower than those from the digital dividend, despite this spectrum being as valuable as 800 MHz spectrum for some operators. In the second place, regarding femtocell deployment, some conclusions can be drawn in terms of deployment cost savings and also with reference to the business model they enable. Savings provided by a joint macro-femto LTE network as compared to an exclusively macrocellular deployment increase as the available bandwidth for the macrocells decreases. Therefore, for a convergent operator the deployment of femtocells can only have economic sense if the available bandwidth is scarce (around 2x10 MHz), which might be the case of fix market operators which are new entrant in mobile market. Besides, open access models are interesting for exclusively mobile operators, since they make costs more flexible by substituting macrocell base stations by femtocells, but they need to be deployed relatively densely populated areas so that they can offload traffic from several macrocell users simultaneously. Nonetheless, femtocells are beneficial in all cases if the user assumes both femtocell and backhaul costs, which only seems probable if they are integrated in a business model commercializing new services. Therefore, in many of the cases analyzed femtocell deployment only makes sense if they increase revenues per user through new added value services which need from guaranteed quality of service, thus exploiting its main competitive advantage compared to WiFi. Finally, regarding the role of LTE technology in the provision of fixed wireless access services for 30 Mbps broadband, a TD-LTE model has been developed and a prospective study has been carried out through techno-economic methodology for the Spanish case. Obtained results foresee a FTTH coverage footprint of 74% households for 2020, and prove that a TD-LTE network in the 3.5 GHz band results feasible to increase 30 Mbps service coverage in additional 14 percentage points. To sum up, obtained results show LTE technology capability to address new challenges regarding both mobile traffic growth, particularly critical in urban zones, and the current digital divide in fast broadband access in most rural zones.

Influencia de la altura de lluvia en la atenuación por precipitación en comunicaciones por satélite

El objetivo principal de este Proyecto Fin de Grado es el estudio experimental de la atenuación, producida por las precipitaciones, en los enlaces Tierra – satélite en banda Ka. En particular, se ha realizado el estudio para una frecuencia de 19,701 GHz, que corresponde con la frecuencia de una de las balizas del satélite Hot Bird 13 de Eutelsat. Para la realización del estudio se dispone de datos experimentales recogidos por sondeos realizados en la estación meteorológica de Madrid - Barajas y de datos sinópticos. La primera parte del proyecto comienza con una descripción de los fundamentos teóricos de los distintos fenómenos que afectan a la propagación en un enlace por satélite, y se enumeran los distintos modelos de predicción más importantes. Posteriormente se describen en más detalle algunos modelos de predicción propuestos por la Unión Internacional de Telecomunicaciones (UIT). En la segunda parte del mismo se explica en detalle el proceso necesario para el procesado de los datos experimentales, con el fin de poder manejarlos de forma más sencilla a la hora de presentar los resultados pertinentes. En una tercera parte se recogen los resultados experimentales obtenidos para el caso de la altura de la isoterma a 0˚C y de la atenuación por lluvia. El capítulo dedicado al estudio de la altura de la isoterma a 0˚C se centra en obtener dicho dato a partir de los datos experimentales de los sondeos, que fueron procesados con anterioridad. Así mismo, se realizará una comparativa de estos datos experimentales con los proporcionados por la UIT en la Recomendación 839. En el capítulo dedicado al estudio de la atenuación producida por la lluvia se compararán los resultados obtenidos de forma experimental con los datos proporcionados por la UIT en la Recomendación 618. Por último se recoge en un capítulo las conclusiones obtenidas con la realización de este PFG y las líneas futuras de investigación. ABSTRACT. The main aim of this Final Degree Project is the experimental study of attenuation by precipitation, in links Earth – Ka band satellite. In particular, the study was performed at a frequency of 19.701 GHz, which corresponds to the frequency of one of the beacons of the satellite Hot Bird 13 (Eutelsat). There is experimental data and synoptic data provided, which was collected from surveys in the Madrid- Barajas weather station. The first part of the project outlines some theoretical foundations regarding different phenomena which affect propagation in a satellite link and includes the most important prediction models. Additionally, some prediction models proposed by the International Telecommunication Union (ITU) are outlined in detail. In the second part, the process for the processing of the experimental data is explained in detail. This process is necessary in order to be able to utilize the data more easily when presenting the results of this project. In the third part, the experimental results obtained in the study are presented for both cases: isotherm height at 0°C and rain attenuation. The chapter dedicated to the study of the isotherm height at 0°C focuses on obtaining the real isotherm height at 0°C from the experimental data processed previously. Furthermore, a comparison will be made between the experimental results and data proposed by ITU in Recommendation 839. The chapter dedicated to the study of rain attenuation focuses on making a comparison between the results from the experimental data and data proposed by ITU in Recommendation 618. Finally, there is a chapter which revises all the conclusions obtained throughout this project and provides recommendations for future research.

A Transportable Reflectarray Antenna for Satellite Ku-band Emergency Communications

The design of a Ku-band reconfigurable reflectarray antenna for emergency satellite communications is presented. Bidirectional high data rate satellite links are needed in emergency conditions where other telecommunication infrastructures are not available. In order to operate in this type of scenario, an antenna should be deployable, transportable, and easily repointable. The need of an automatic and fast satellite location and pointing system leads to a completely electronic reconfigurable antenna. The operative bandwidth is from 10.7 to 12.5 GHz for reception and from 14 up to 14.5 GHz for transmission (30% of relative bandwidth). The selected antenna architecture is based on a dual reflectarray system comprising a passive subreflectarray and an active main reflectarray made of reconfigurable 1-bit elementary cells based on PIN diodes.

Design of broadband transmitarray unit cells with comparative study of different numbers of layers

A generalized methodology to design low-profile transmitarray (TA) antennas made of several stacked layers with nonresonant printed phasing elements is presented. A study of the unit cell bandwidth, phase-shift range and tolerances has been conducted considering different numbers of layers. A structure with three metalized layers with capacitive and inductive elements enabling a phase range of nearly 360° and low insertion loss is introduced. A study of the four-layer structure shows improvement in the performance of the unit cells in terms of bandwidth from 2% to more than 20% and a complete phase coverage. Implementations on a flexible substrate of TAs with progressive phase shift operating at 19 GHz are used for validation.

Reflectarray antennas for dual polarization and broadband telecom satellite applications

A reflectarray antenna with improved performance is proposed to operate in dual-polarization and transmit-receive frequencies in Ku-band for broadcast satellite applications. The reflectarray element contains two orthogonal sets of four coplanar parallel dipoles printed on two surfaces, each set combining lateral and broadside coupling. A 40-cm prototype has been designed, manufactured, and tested. The lengths of the coupled dipoles in the reflectarray cells have been optimized to produce a collimated beam in dual polarization in the transmit and receive bands. The measured radiation patterns confirm the high performance of the antenna in terms of bandwidth (27%), low losses, and low levels of cross polarization. Some preliminary simulations at 11.95 GHz for a 1.2-m antenna with South American coverage are presented to show the potential of the proposed antenna for spaceborne antennas in Ku-band.

Calidad ambiental electromagnética : atenuación de las radiaciones electromagnéticas en los espacios habitados

La perspectiva del arquitecto en calidad ambiental, y salud en un contexto sostenible, se amplía al considerar las radiaciones electromagnéticas no ionizantes en el diseño arquitectónico. En ese sentido, además del confort higrotérmico, acústico, lumínico y de la calidad del aire, se podría considerar el confort electromagnético de un lugar. Dado que existe gran controversia en cuales han de ser los límites de exposición a radiaciones electromagnéticas no ionizantes, establezco como punto de referencia los valores límite más restrictivos, que son los recomendados por la norma SBM-2008, desarrollada por el Institut für Baubiologie & Oekologie Neubeuern (IBN)1. Se plantean como hipótesis que podemos modificar el entorno electromagnético con materiales de construcción y geometría; y que determinados trazados geométricos tienen la capacidad de reducir el impacto de los campos electromagnéticos sobre los organismos vivos. El objetivo consiste en demostrar experimentalmente que podemos trabajar sobre la calidad ambiental electromagnética de un espacio, a través de la elección de materiales de construcción y trazados geométricos, intentando demostrar que existe una relación causa - efecto entre ambos. La metodología plantea tres aproximaciones experimentales, cada una con un tipo de radiación electromagnética, pues se pretende abarcar las situaciones que comúnmente se pueden presentar en un entorno habitado, ya sea urbano o rural. La primera aproximación trata sobre las alteraciones del campo geomagnético natural (nT / m) provocadas por los materiales de construcción. Utilizo el geomagnetómetro BPM 2010, para realizar un ensayo con cuatro tipos de materiales de distinta procedencia: origen vegetal muy poco procesado (corcho aglomerado negro) y más procesado (OSB), origen derivado del petróleo (tablero rígido de poliuretano) y de origen mineral metálico (chapa minionda). De la lectura de los datos se observa relación causa-efecto entre los materiales de construcción estudiados y las modificaciones que pueden ejercer sobre el campo magnético de un lugar. A continuación se estudia el entorno de radiación electromagnética artificial a baja frecuencia (3 Hz a 3 kHz) y a alta frecuencia, (800 MHz a 10 GHz) en vivienda y en oficina utilizando unas geometrías concretas: las tarjetas de corrección de radiaciones. Estas tarjetas se ubican en paramentos verticales y horizontales de un espacio sometido a radiación propia de un entorno urbano. Se concluye que en una habitación inciden múltiples variables simultáneas muy difíciles de trabajar por separado y que aparentemente no se pueden identificar cambios significativos en las mediciones con y sin las tarjetas de corrección de radiaciones. A continuación estudio el entorno de radiación electromagnética artificial a baja frecuencia asociada a la red de distribución eléctrica. Para poder ver cómo este entorno electromagnético lo podemos modificar, utilizo las tarjetas de corrección de radiaciones ubicadas en relación directa con organismos vivos, por un lado germinados de semillas de haba mungo sometidas a campos electromagnéticos complejos a alta y baja frecuencia, propios de una oficina; y por otro lado germinados de semillas de haba mungo, sometidas a campos electromagnéticos puros a 50 Hz, sin influencias de radiación a alta frecuencia. Se concluye que se observa relación causa - efecto entre los trazados geométricos estudiados y su capacidad para reducir el impacto de los campos electromagnéticos a altas y bajas frecuencias sobre las semillas de haba mungo. También utilizo las tarjetas de corrección de radiaciones en un ensayo normalizado en el laboratorio de bioelectromagnetismo del Hospital Universitario Ramón y Cajal, con células de neuroblastoma humano. Se concluye que se observa relación causa - efecto entre los trazados geométricos estudiados y su capacidad para reducir el impacto de los campos electromagnéticos de 50 Hz Y 100 μT sobre células de neuroblastoma humano y además disminuyen la velocidad de proliferación celular respecto del grupo de células de control. Finalmente se estudia el entorno de radiación electromagnética artificial a alta frecuencia, asociado a comunicaciones inalámbricas. Para ello realizo simulaciones con el software CST Studio, sobre las tarjetas de corrección de radiaciones a alta frecuencia. A la luz de los datos se observa relación causa - efecto entre el trazado geométrico estudiado y su capacidad para reducir radiaciones electromagnéticas de alta frecuencia. Se comprueba además que, las tarjetas de corrección de radiaciones disminuyen la intensidad de la radiación acercándose a los límites de exposición establecidos por el instituto de la biología de la construcción alemán, que podrían estar señalando los estándares de biocompatibilidad. ABSTRACT The perspective of the architect in environmental quality, and health in a sustainable context is extended to consider non-ionizing electromagnetic radiation in architectural design. In that sense, besides the hygrothermal, acoustic, lighting and air quality comfort, the electromagnetic comfort of an indoor space could be considered. There is still great controversy about which should be the limits of exposure to nonionizing electromagnetic radiation, as a benchmark, the more restrictive limits are considered, by the SBM- 2008 standard, developed by the Institut für Baubiologie & Oekologie Neubeuern (IBN). The hypotheses that arise are the following: the electromagnetic environment can be modified by using certain construction materials and geometry; and certain geometric design have the ability to reduce the impact of electromagnetic fields on living organisms. The aim is to demonstrate experimentally that we can work on electromagnetic environmental quality of a indoor space, by using certain construction materials and geometric design, trying to demonstrate a cause - effect relationship between them. The methodology raises three experimental approaches, each with a type of radiation, it is intend to cover situations commonly may occur in an inhabited environment, whether urban or rural. The first approach discusses the alteration of the natural magnetic field (nT / m) caused by the building materials. Geomagnetometre BPM 2010 is used for conducting a test with four types of materials from different sources: vegetable origin less processing (black agglomerate cork) and vegetable origin more processed (OSB), petroleum origin (rigid polyurethane board) and metallic origin (miniwave plate). It is observed across the data information that exist cause-effect relationship between the construction materials studied and the modifications that they can exercise on the magnetic field of a place. Then I study the environment of artificial electromagnetic radiation at low frequency (3 Hz to 3 kHz) and high frequency (800 MHz to 10 GHz) in housing and office, using some specific geometries: correcting radiation cards. These cards are placed in vertical and horizontal surfaces of an indoor space concerned by radiation. I conclude that an indoor space is affected by multiple simultaneous variables difficult to work separately and apparently it is not possible identify significant changes in measurements with and without correcting radiation cards. Then the artificial electromagnetic environment of low-frequency radiation associated with the electricity distribution network is studied. To see how the electromagnetic environment can be changed, correcting radiation cards are placed directly related to living organisms. On one hand, mung bean seeds subject to complex electromagnetic fields at low and high frequency, typical of an office; and on the other hand mung bean seeds, subjected to pure electromagnetic fields at 50 Hz, no influenced by high frequency radiation. It is observed that exist cause-effect relationship between the geometric design and their ability to reduce the impact of electromagnetic fields at high and low frequencies that arrives on on mung bean seeds. The correcting radiation cards were also used in a standard test in the bioelectromagnetics laboratory of Ramón y Cajal University Hospital, on human neuroblastoma cells. It is observed that exist cause-effect relationship between the geometric design and their ability to reduce the impact of electromagnetic fields at 50 Hz and 100 μT on human neuroblastoma cells and also decrease the rate of cell proliferation compared to the group of cells control. Finally the artificial electromagnetic radiation environment at high frequency associated with wireless communications was studied. Simulations with CST Study software were made to determine the behavior of correcting radiation cards in high-frequency. It is observed across the data information that exist causeeffect relationship between the geometric design and the ability to reduce the levels of high-frequency electromagnetic radiation. It also checks that radiation correcting cards decrease the intensity of radiation approaching exposure limits established by Institut für Baubiologie & Oekologie Neubeuern (IBN), which could be signaling biocompatibility standards.

High-frequency, spin-label EPR of nonaxial lipid ordering and motion in cholesterol-containing membranes

The EPR spectra of spin-labeled lipid chains in fully hydrated bilayer membranes of dimyristoyl phosphatidylcholine containing 40 mol % of cholesterol have been studied in the liquid-ordered phase at a microwave radiation frequency of 94 GHz. At such high field strengths, the spectra should be optimally sensitive to lateral chain ordering that is expected in the formation of in-plane domains. The high-field EPR spectra from random dispersions of the cholesterol-containing membranes display very little axial averaging of the nitroxide g-tensor anisotropy for lipids spin labeled toward the carboxyl end of the sn-2 chain (down to the 8-C atom). For these positions of labeling, anisotropic 14N-hyperfine splittings are resolved in the gzz and gyy regions of the nonaxial EPR spectra. For positions of labeling further down the lipid chain, toward the terminal methyl group, the axial averaging of the spectral features systematically increases and is complete at the 14-C atom position. Concomitantly, the time-averaged 〈Azz〉 element of the 14N-hyperfine tensor decreases, indicating that the axial rotation at the terminal methyl end of the chains arises from correlated torsional motions about the bonds of the chain backbone, the dynamics of which also give rise to a differential line broadening of the 14N-hyperfine manifolds in the gzz region of the spectrum. These results provide an indication of the way in which lateral ordering of lipid chains in membranes is induced by cholesterol.

Molecular dynamics of a grid-mounted molecular dipolar rotor in a rotating electric field

Classical molecular dynamics is applied to the rotation of a dipolar molecular rotor mounted on a square grid and driven by rotating electric field E(ν) at T ≃ 150 K. The rotor is a complex of Re with two substituted o-phenanthrolines, one positively and one negatively charged, attached to an axial position of Rh\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \setlength{\oddsidemargin}{-69pt} \begin{document} \begin{equation*}{\mathrm{_{2}^{4+}}}\end{equation*}\end{document} in a [2]staffanedicarboxylate grid through 2-(3-cyanobicyclo[1.1.1]pent-1-yl)malonic dialdehyde. Four regimes are characterized by a, the average lag per turn: (i) synchronous (a < 1/e) at E(ν) = |E(ν)| > Ec(ν) [Ec(ν) is the critical field strength], (ii) asynchronous (1/e < a < 1) at Ec(ν) > E(ν) > Ebo(ν) > kT/μ, [Ebo(ν) is the break-off field strength], (iii) random driven (a ≃ 1) at Ebo(ν) > E(ν) > kT/μ, and (iv) random thermal (a ≃ 1) at kT/μ > E(ν). A fifth regime, (v) strongly hindered, W > kT, Eμ, (W is the rotational barrier), has not been examined. We find Ebo(ν)/kVcm−1 ≃ (kT/μ)/kVcm−1 + 0.13(ν/GHz)1.9 and Ec(ν)/kVcm−1 ≃ (2.3kT/μ)/kVcm−1 + 0.87(ν/GHz)1.6. For ν > 40 GHz, the rotor behaves as a macroscopic body with a friction constant proportional to frequency, η/eVps ≃ 1.14 ν/THz, and for ν < 20 GHz, it exhibits a uniquely molecular behavior.

Structure and evolution of the compact radio source in NGC 1275.

Investigations of the fine-scale structure in the compact nucleus of the radio source 3C 84 in NGC 1275 (New General Catalogue number) are reported. Structural monitoring observations beginning as early as 1976, and continuing to the present, revealed subluminal motions in a jet-like relatively diffuse region extending away from a flat-spectrum core. A counterjet feature was discovered in 1993, and very recent nearly simultaneous studies have detected the same feature at five frequencies ranging from 5 to 43 GHz. The counterjet exhibits a strong low-frequency cutoff, giving this region of the source an inverted spectrum. The observations are consistent with a physical model in which the cutoff arises from free-free absorption in a volume that surrounds the core but obscures only the counterjet feature. If such a model is confirmed, very-long-baseline radio interferometry observations can then be used to probe the accretion region, outside the radio jet, on parsec scales.

Subparsec-scale structure and evolution of Centaurus A (NGC5128).

We present a series of 8.4-GHz very-long-baseline radio interferometry images of the nucleus of Centaurus A (NGC5128) made with a Southern Hemisphere array, representing a 3.3-year monitoring effort. The nuclear radio jet is approximately 50 milliarcseconds in extent, or at the 3.5-megaparsec distance of NGC5128, approximately 1 parsec in length. Subluminal motion is seen and structural changes are observed on time scales shorter than 4 months. High-resolution observations at 4.8 and 8.4 GHz made in November 1992 reveal a complex morphology and allow us to unambiguously identify the self-absorbed core located at the southwestern end of the jet.

The nuclear jet and counterjet region of the radio galaxy Cygnus A.

Very-long-baseline interferometry images of the nuclear region of the radio galaxy Cygnus A reveal a pronounced "core" and a knotty jet and counterjet. The knots are moving away from the core at apparent speeds which are subluminal for h = 1 [h = H0/100 km.s-1.Mpc-1;1 parsec (pc) = 3.09 x 10(16)m] and about c for h = 0.5. The jet is aligned with the outer, kiloparsec-scale jet to within 2 degrees. The counterjet has a total flux density at 5 GHz of about one-fifth of that of the jet. In the context of the twin relativistic jet model for active galactic nuclei, the jet in Cygnus A is oriented at an angle to our line of sight of 35-80 degrees and 55-85 degrees, and the intrinsic velocity of the jet fluid is 0.4-0.6c and 0.6-1c for h = 1 and h = 0.5, respectively.

Very-long-baseline radio interferometry (VLBI) observations of gamma-ray blazars: results from millimeter-VLBI observations.

VLBI observations of the extremely gamma-bright blazar PKS 0528+134 at 8, 22, 43, and 86 GHz reveal a strongly bent one-sided-core jet structure with at least three moving and two apparently stationary jet components. At the highest observing frequencies the brightest and most compact jet component (the VLBI core) is unresolved with an upper limit to its size of approximately 50 microarcsec corresponding to approximately 0.2 parsec [H0 = 100 km.s-1.Mpc-1 (megaparsec-1), q0 = 0.5, where H0 is Hubble constant and q0 is the deceleration parameter]. Two 86-GHz VLBI observations performed in 1993.3 and 1994.0 reveal a new jet component emerging with superluminal speed from the core. Linear back-extrapolation of its motion yields strong evidence that the ejection of this component is related to an outburst in the millimeter regime and a preceding intense flare of the gamma-flux density observed in early 1993. This and the radio/optical "light curves" and VLBI data for two other sources (S5 0836+710 and 3C 454.3) suggest that the observed gamma-radiation might be Doppler-boosted and perhaps is closely related to the physical processes acting near the "base" of the highly relativistic jets observed in quasars.

Superluminal sources.

Predictions for the apparent velocity statistics under simple beaming models are presented and compared to the observations. The potential applications for tests of unification models and for cosmology (source counts, measurements of the Hubble constant H0 and the deceleration parameter q0) are discussed. First results from a large homogeneous survey are presented. The data do not show compelling evidence for the existence of intrinsically different populations of galaxies, BL Lacertae objects, or quasars. Apparent velocities betaapp in the range 1-5 h-1, where h = H0/100 km.s-1.Mpc-1 [1 megaparsec (Mpc) = 3.09 x 10(22) m], occur with roughly equal frequency; higher values, up to betaapp = 10 h-1, are rather more scarce than appeared to be the case from earlier work, which evidently concentrated on sources that are not representative of the general population. The betaapp distribution suggests that there might be a skewed distribution of Lorentz factors over the sample, with a peak at gammab approximately 2 h-1 and a tail up to at least gammab approximately 10 h-1. There appears to be a clearly rising upper envelope to the betaapp distribution when plotted as a function of observed 5-GHz luminosity; a combination of source counts and the apparent velocity statistics in a larger sample could provide much insight into the properties of radio jet sources.