992 resultados para Experimental Realization
Resumo:
By employing a continuous-wave (CW) Ti:sapphire tunable laser as a pumping source and a Cr4+:YAG single crystal as the saturable absorber (SA), a passively Q-switched Nd:YAG ceramic laser has been demonstrated at room temperature. With an absorbed pumping power of 541 mW at 808 nm, an average output power of 61 mW at 1064 nm has been obtained with 3.5 mu J pulse energy, 15 ns pulse width and 18.18 kHz repetition rate, and the corresponding slope-efficiency is 15%. The relationships between the pulse width, repetition rate, average output power, pulse energy, and peak power on the absorbed pumping power for different initial transmission of the Cr4+:YAG SA are discussed separately. The Nd:YAG ceramic is one of the most promising laser materials for compact, efficient, all-solid-state pulsed lasers.
Caracterización experimental del comportamiento dinámico de un accionamiento de máquina herramienta.
Resumo:
[ES]El objetivo de este proyecto es validar experimentalmente una serie de modelos que caracterizan el comportamiento de un accionamiento de máquina herramienta de husillo a bolas. El proyecto aparece como respuesta a un problema de precisión que se percibe en máquinas herramienta con pórticos y columnas verticales de varios metros. Para ello, es necesario diseñar un prototipo de esta máquina herramienta y un modelo de 3 grados de libertad (con un programa numérico y un simulador). Este modelo debe ser validado por medidas internas y externas para predecir como una columna real actuaria bajo condiciones predeterminadas.
Resumo:
[ES]El objetivo de este proyecto es el desarrollo de un sistema de adquisición y tratamiento de señales analógicas para la medida experimental de la posición y aceleración. Por un lado, la adquisición de señales se llevará a cabo mediante una placa electrónica programable llamada “Arduino”. Por otro lado, haciendo uso de la plataforma LabVIEW, se creará un programa para analizar dichas señales. Se medirán señales analógicas provenientes de diferentes sensores (inclinómetros y acelerómetros).
Resumo:
Phase locking of a two-dimensional fiber laser array is experimentally demonstrated by using a self-imaging resonator and a spatial filter. The stable beam profiles of in-phase mode and out-of-phase mode are observed by controlling the position of spatial filter. The phase locking fiber array with in-phase mode has produced 26 W coherent output. An antisymmetric eigenmode is also observed in our experiments. The phase locking is not sensitive to power variations among the pump beams and the configuration has the ability to repair a missing element. (C) 2008 American Institute of Physics.
Resumo:
The effect of laser fluence on the crystallization of amorphous silicon irradiated by a frequency-doubled Nd:YAG laser is studied both theoretically and experimentally. An effective numerical model is set up to predict the melting threshold and the optimized laser fluence for the crystallization of 200-nm-thick amorphous silicon. The variation of the temperature distribution with time and the melt depth is analyzed. Besides the model, the Raman spectra of thin films treated with different fluences are measured to confirm the phase transition and to determine the optimized fluence. The calculating results accord well with those obtained from the experimental data in this research. (C) 2008 Elsevier Ltd. All rights reserved.
Resumo:
We study the nonlinear photonics of rare-earth-doped oxyfluoride nanophase vitroceramics (FOV), oxyfluoride glass (FOG), and ZBLAN fluoride glass. We found that an interesting fluorescence intensity inversion phenomenon between red and green fluorescence occurs from Er(0.5)Yb(3):FOV The dynamic range Sigma of the intensity inversion between red and green fluorescence of Er(0.5)Yb(3):FOV is about 5.753 x 10(2), which is 100 to 1000 times larger than those of other materials. One of the applications of this phenomenon is double-wavelength fluorescence falsification-preventing technology, which is proved to possess the novel antifriction loss and antiscribble properties. (c) 2007 Optical Society of America.
Resumo:
Large numbers of fishing vessels operating from ports in Latin America participate in surface longline fisheries in the eastern Pacific Ocean (EPO), and several species of sea turtles inhabit the grounds where these fleets operate. The endangered status of several sea turtle species, and the success of circle hooks (‘treatment’ hooks) in reducing turtle hookings in other ocean areas, as compared to J-hooks and Japanese-style tuna hooks (‘control’ hooks), prompted the initiation of a hook exchange program on the west coast of Latin America, the Eastern Pacific Regional Sea Turtle Program (EPRSTP)1. One of the goals of the EPRSTP is to determine if circle hooks would be effective at reducing turtle bycatch in artisanal fisheries of the EPO without significantly reducing the catch of marketable fish species. Participating fishers were provided with circle hooks at no cost and asked to replace the J/Japanese-style tuna hooks on their longlines with circle hooks in an alternating manner. Data collected by the EPRSTP show differences in longline gear and operational characteristics within and among countries. These aspects of the data, in addition to difficulties encountered with implementation of the alternating-hook design, pose challenges for analysis of these data.
Resumo:
Experimental fishing at S. Lazaro Bank, Mozambique is reported, during which stocks of pelagic and big demersal species as well as the most suitable gears and crafts for their commercial fishing were studied.
Resumo:
An account is given of activities undertaken during the project, which was concerned with the development of tuna fisheries using rod and live bait, in Mozambique. Major tuna species present in the area are described, and fishing gear and methods used outlined, detailing also catch composition and live bait utilized.