Análise paramétrica da estabilidade de falésias e estudo de caso da Ponta do Pirambu em Tibau do Sul/RN

The coastline from Rio Grande do Norte state is characterized for the presence of dunes and cliffs. The latter consist of slopes with height up to 40 meters and inclinations ranging from 30° to 90° wich horizontal. Thus, this dissertation had as objective the evaluation of the stability of cliff from Ponta do Pirambu in Tibau do Sul/RN, and the realization of a parametric study on the stability of a homogeneous cliff considering as variables the material's cohesion, the cliff height and the slope inclination. The study in Ponta do Pirambu considered yet the possibility of the existence of a colluvial cover with thickness ranging from 0.50 to 5.00 meters. The analyzes were performed by Bishop method, using GEO5 software. In parametric analysis were produced graphics that relate height cliff with the inclination, to safety factors equals to 1.00 and 1.50; besides graphics where it is possible easily get the lowest safety factor as from the cohesion, cliff height and its inclination. It was concluded that these graphs are very useful to preliminary analyzes, for the definition of critical areas in risk mappings in areas of cliffs and for determination of an equation for obtaining the lowest safety factor function of the strength parameters and of slope geometry. Regarding the cliff from Ponta do Pirambu, the results showed that the cliff is subject to superficial landslides located in the points where may there be the presence of colluvium with thicknesses greater than two meters. However, the cliff remains stable presenting the global safety factor equal or superior to 2.50 in the saturated condition.

Tensoativo derivado do ácido cítrico: síntese e aplicação em fluidos de perfuração de emulsão inversa

This work describes the synthesis and study of the application of a new surfactant (Triester Lipophilic – TEL) obtained by citric acid with octanol. It is reaction was followed by thin layer chromatography (TLC) and after purification the product was characterized by proton and 13 – carbon nuclear magnetic resonance spectroscopy ( H and 13C NMR), thermogravimetric analysis (TGA) and surface tension analysis of oil-in-water emulsions. The TEL performance as surfactant in ester, n-paraffin and biodiesel based drilling fluids on the 70/30 and 60/40 water- oil rations (WOR) was evaluated by comparative tests of two commercial products used in the fields. These drilling fluids were aged in roller oven at 200 0 F during 16 h. The rheological and electric stability measurements were carried out at 135 ºF, the phase separation was evaluated after seven days at rest and the filtrate volume of drilling fluids was determined at high temperature and high pressure. The rheological behavior of the drilling fluids was evaluated by the flow curves. The results showed that the drilling fluids studied here presented Binghamian behavior as well as the used in the oil fields. The laboratory tests showed that the TEL reduced the filtrate volume and promoted the enhance of the thermal and mechanical stabilities.

Desenvolvimento e caracterização de um eco-compósito de poliuretano de mamona e fibra de lã canina

The Sustainability has been evidence in the world today; organizations have sought to be more and more into this philosophy in their processes, whether products or attendance. In the present work were manufactured eco-composites with animal fiber (dog wool) that is currently discarded into the environment without any use. Project phases consisted on the initial treatment of fibers with alkaline solution (NaOH) at 0.05 mols for removal of impurities, developing methods to convert these fibers (reinforcement) blended with castor oil polyurethane (matrix) in eco-composite with different proportions (5%, 10%, 15% and 20%). Fiber properties were evaluated by analysis of SEM, XRD and FTIR. The composites were produced by compression molding with dimensions 30x30x1cm. For characterization of the composites the following tests were performed: mechanical (tensile, compression, shore hardness A) according the standards and testing water absorption, moisture regain and biodegradation. The analysis of thermal properties on fibers and composites were by TG, DSC, thermal conductivity, resistivity, heat capacity and thermal resistance. Analyzing the results of these tests, it was observed that the composite reinforced with 20% showed a better thermal performance between others composites and dimensional stability when compared to commercial thermal insulation. Also is possible to observe a balance in moisture absorption of the composite being shown with its higher absorption rate in this same sample (20%). The micrographs show the fiber interaction regions with polyurethane to fill the empty spaces. In hardness and compression testing can identify that with increasing percentage of the fiber material acquires a greater stiffness by making a higher voltage is used for forming necessary. So by the tests performed in eco-composites, the highest percentage of fiber used as reinforcement in their composition obtained a better performance compared to the remaining eco-composites, reaching values very close to the PU.

Novos protocolos teóricos utilizados nos estudos das ligações hidrogênio-hidrogênio, na estabilidade do tetraedrano, seus derivados e das reações de diels-alder e na quantificação da afinidade de fármacos

This thesis was performed in four chapters, at the theoretical level, focused mainly on electronic density. In the first chapter, we have applied an undergraduate minicourse of Diels-Alder reaction in Federal University of Rio Grande do Norte. By using computational chemistry tools students could build the knowledge by themselves and they could associate important aspects of physical-chemistry with Organic Chemistry. In the second chapter, we studied a new type of chemical bond between a pair of identical or similar hydrogen atoms that are close to electrical neutrality, known as hydrogen-hydrogen (H-H) bond. In this study performed with complexed alkanes, provides new and important information about their stability involving this type of interaction. We show that the H-H bond playing a secondary role in the stability of branched alkanes in comparison with linear or less branched isomers. In the third chapter, we study the electronic structure and the stability of tetrahedrane, substituted tetrahedranes and silicon and germanium parents, it was evaluated the substituent effect on the carbon cage in the tetrahedrane derivatives and the results indicate that stronger electron withdrawing groups (EWG) makes the tetrahedrane cage slightly unstable while slight EWG causes a greater instability in the tetrahedrane cage. We showed that the sigma aromaticity EWG and electron donating groups (EDG) results in decrease and increase, respectively, of NICS and D3BIA aromaticity indices. In addition, another factor can be utilized to explain the stability of tetra-tert-butyltetrahedrane as well as HH bond. GVB and ADMP were also used to explain the stability effect of the substituents bonded to the carbon of the tetrahedrane cage. In the fourth chapter, we performed a theoretical investigation of the inhibitory effect of the drug abiraterone (ABE), used in the prostate cancer treatment as CYP17 inhibitor, comparing the interaction energies and electron density of the ABE with the natural substrate, pregnenolone (PREG). Molecular dynamics and docking were used to obtain the CYP1ABE and CYP17-PREG complexes. From molecular dynamics was obtained that the ABE has higher diffusion trend water CYP17 binding site compared to the PREG. With the ONIOM (B3LYP:AMBER) method, we find that the interaction electronic energy of ABE is 21.38 kcal mol-1 more stable than PREG. The results obtained by QTAIM indicate that such stability is due a higher electronic density of interactions between ABE and CYP17

Indicador de inconformidades em instalações elétricas de baixa tensão

With the progress of devices technology, generation and use of energy ways, power quality parameters start to influence more significantly the various kinds of power consumers. Currently, there are many types of devices that analyze power quality. However, there is a need to create devices, and perform measurements and calculate parameters, find flaws, suggest changes, and to support the management of the installation. In addition, you must ensure that such devices are accessible. To maintain this balance, one magnitude measuring method should be used which does not require great resources processing or memory. The work shows that application of the Goertzel algorithm, compared with the commonly used FFT allows measurements to be made using much less hardware resources, available memory space to implement management functions. The first point of the work is the research of troubles that are more common for low voltage consumers. Then we propose the functional diagram indicate what will be measured, calculated, what problems will be detected and that solutions can be found. Through the Goertzel algorithm simulation using Scilab, is possible to calculate frequency components of a distorted signal with satisfactory results. Finally, the prototype is assembled and tests are carried out by adjusting the parameters necessary for one to maintain a reliable device without increasing its cost.

Desempenho agronômico, bromatológico e estabilidade fenotípica de sorgo silageiro em Uberlândia - MG

Sorghum (Sorghum bicolor (L.) Moench) is a good alternative to be used as silage, especially in places with water scarcity and high temperatures, due to their morphological and physiological characteristics. The appropriate management, as the ideal seeding time, interferes both productivity and the quality of silage. The work was conducted with the objective of evaluating the agronomic and bromatological performance of varieties and hybrids of silage sorghum and their phenotypic stability in two seasons, season and off-season, in the city of Uberlândia, Minas Gerais. The experiments were performed at Capim Branco Experimental Farm of Federal University of Uberlândia (UFU), located in the referred city. There were two sowing dates in the same experimental area, off-season (March to June 2014) and season (November 2014 to March 2015), and the varieties and hybrids were evaluated in both situations. The design was a randomized block with 25 treatments (hybrids and varieties of sorghum) and three replications. Agronomical and bromatological data were subjected to an analysis of variance; averages were grouped by Scott-Knott test at 5% of probability, through Genes computer program; and to estimate the stability, it was opted for Annicchiarico method. The flowering of cultivars, dry matter productivity, plant height, Acid Detergent Fiber (ADF), Neutral Detergent Fiber (NDF) and Crude Protein (CP) are affected by the environment and the variety. Regarding productivity and quality of the fiber, SF11 variety was superior, independent of the rated environment. In relation to the performance stability of dry matter, the varieties SF15, SF11, SF25, PROG 134 IPA, 1141572, 1141570 and 1141562 were highlighted. For the stability of the quality of fibers (FDA and FDN), the variety 1141562 stood out. The environment reduces the expression of characters “days of flowering”, “plant height” and “productivity of dry matter of hybrids”. From the 25 hybrids analyzed for productivity and stability of dry matter performance, seven were highlighted, regardless of the rated environment: Volumax commercial hybrid and experiments 12F39006, 12F39007, 12F37014, 12F39014, 12F38009 and 12F02006.

Efeito do exercício físico na estabilidade de membrana de eritrócitos

CHAPTER II - This study evaluated the effects of two different types of acute aerobic exercise on the osmotic stability of human erythrocyte membrane and on different hematological and biochemical variables that are associated with this membrane property. The study population consisted of 20 healthy and active men. Participants performed single sessions of two types of exercise. The first session consisted of 60 min of moderate-intensity continuous exercise (MICE). The second session, executed a week later, consisted of high-intensity interval exercise (HIIE) until exhaustion. The osmotic stability of the erythrocyte membrane was represented by the inverse of the salt concentration (1/H50) at the midpoint of the sigmoidal curve of dependence between the absorbance of hemoglobin and the NaCl concentration. The values of 1/H50 changed from 2.29 ± 0.1 to 2.33 ± 0.09 after MICE and from 2.30 ± 0.08 to 2.23 ± 0.12 after HIIE. In MICE has occurred an increase in the mean corpuscular volume, probably due to in vivo lysis of older erythrocytes, with preservation of cells that were larger and more resistant to in vitro lysis. The study showed that a single bout of acute exercise affected the erythrocyte osmotic stability, which increased after MICE and decreased after HIIE.

Efeito da geometria do implante dentário e do protocolo de fresagem óssea na estabilidade primária e na osseointegração inicial: estudo experimental em cães

CHAPTER 1 - This study histologically evaluated two implant designs: a classic thread design versus another specifically designed for healing chamber formation placed with two drilling protocols. Forty dental implants (4.1 mm diameter) with two different macrogeometries were inserted in the tibia of 10 Beagle dogs, and maximum insertion torque was recorded. Drilling techniques were: until 3.75 mm (regular-group); and until 4.0 mm diameter (overdrillinggroup) for both implant designs. At 2 and 4 weeks, samples were retrieved and processed for histomorphometric analysis. For torque and BIC (bone-to-implant contact) and BAFO (bone area fraction occupied), a general-linear model was employed including instrumentation technique and time in vivo as independent. The insertion torque recorded for each implant design and drilling group significantly decreased as a function of increasing drilling diameter for both implant designs (p<0.001). No significant differences were detected between implant designs for each drilling technique (p>0.18). A significant increase in BIC was observed from 2 to 4 weeks for both implants placed with the overdrilling technique (p<0.03) only, but not for those placed in the 3.75 mm drilling sites (p>0.32). Despite the differences between implant designs and drilling technique an intramembranous-like healing mode with newly formed woven bone prevailed. CHAPTER 2 - The objective of this preliminary histologic study was to determine whether the alteration of drilling protocols (oversized, intermediate, undersized drilling) present different biologic responses at early healing periods of 2 weeks in vivo in a beagle dog model. Ten beagle dogs were acquired and subjected to surgeries in the tibia 2 weeks before euthanasia. During surgery, 3 implants, 4 mm in diameter by 10 mm in length, were placed in bone sites drilled to 3.5 mm, 3.75 mm, and 4.0 mm in final diameter. The insertion and removal torque was recorded for all samples. Statistical significance was set to 95% level of confidence and the number of dogs was considered as the statistical unit for all comparisons. For the torque and BIC and BAFO, a general linear model was employed including instrumentation technique and time in vivo as independent. Overall, the insertion torque increased as a function of drilling diameter from 4.0 mm, to 3.75 mm, to 3.5 mm, with a significant difference in torque levels between all groups (p<0.001). Statistical assessment of BIC and BAFO showed significantly higher values for the 3.75 mm (recommended) drilling group was observed relative to the other two groups (p<0.001). Different drilling dimensions resulted in variations in insertion torque values (primary stability) and different pattern of healing and interfacial remodeling was observed for the different groups. CHAPTER 3 - The present study evaluated the effect of different drilling dimensions (undersized, regular, and oversized) in the insertion and removal torques of dental implants in a beagle dog model. Six beagle dogs were acquired and subjected to bilateral surgeries in the radii 1 and 3 weeks before euthanasia. During surgery, 3 implants, 4 mm in diameter by 10 mm in length, were placed in bone sites drilled to 3.2 mm, 3.5 mm, and 3.8 mm in final diameter. The insertion and removal torque was recorded for all samples. Statistical analysis was performed by paired t tests for repeated measures and by t tests assuming unequal variances (all at the 95% level of significance). Overall, the insertion torque and removal torque levels obtained were inversely proportional to the drilling dimension, with a significant difference detected between the 3.2 mm and 3.5 mm relative to the 3.8 mm groups (P < 0.03). Although insertion torque–removal torque paired observations was statis- tically maintained for the 3.5 mm and 3.8 mm groups, a significant decrease in removal torque values relative to insertion torque levels was observed for the 3.2 mm group. A different pattern of healing and interfacial remodeling was observed for the different groups. Different drilling dimensions resulted in variations in insertion torque values (primary stability) and stability maintenance over the first weeks of bone healing.

Utilização da transformada de wavelet para detecção de variações anormais de tensão em sistemas elétricos com geração distribuída

The increasing demand in electricity and decrease forecast, increasingly, of fossil fuel reserves, as well as increasing environmental concern in the use of these have generated a concern about the quality of electricity generation, making it well welcome new investments in generation through alternative, clean and renewable sources. Distributed generation is one of the main solutions for the independent and selfsufficient generating systems, such as the sugarcane industry. This sector has grown considerably, contributing expressively in the production of electricity to the distribution networks. Faced with this situation, one of the main objectives of this study is to propose the implementation of an algorithm to detect islanding disturbances in the electrical system, characterized by situations of under- or overvoltage. The algorithm should also commonly quantize the time that the system was operating in these conditions, to check the possible consequences that will be caused in the electric power system. In order to achieve this it used the technique of wavelet multiresolution analysis (AMR) for detecting the generated disorders. The data obtained can be processed so as to be used for a possible predictive maintenance in the protection equipment of electrical network, since they are prone to damage on prolonged operation under abnormal conditions of frequency and voltage.

A influência do amortecimento viscoelástico na estabilidade aeroelástica de painéis aeronáuticos

Since the creation of supersonic vehicles, during the Second World War, the engineers have given special attention to the interaction between the aerodynamic efforts and the structures of the aircrafts due to a highly destructive phenomenon called flutter in aeronautical panel. Flutter in aeronautical panels is a self-excited aeroelastic phenomenon, which can occurs during supersonic flights due to dynamic instability of inertia, elastic and aerodynamic forces of the system. In the flutter condition, when the critical aerodynamic pressure is reached, the vibration amplitudes of the panel become dynamically unstable and increase exponentially with time, affecting significantly the fatigue life of the existing aeronautical components. Thus, in this paper, the interest is to investigate the possibility of reducing the effects of the supersonic aeroelastic instability of rectangular plates by applying passive constrained viscoelastic layers. The rationale for such study is the fact that as the addition of viscoelastic materials provides decreased vibration amplitudes it becomes important to quantify the suppression of plate flutter coalescence modes that can be obtained. Moreover, despite the fact that much research on the suppression of panel flutter has been carried out by using passive, semi-active and active control techniques, very few of them are adapted to deal with the problem of estimating the flutter speeds of viscoelastic systems, since they must conveniently account for the frequency- and temperature-dependent behavior of the viscoelastic material. In this context, two different model of viscoelastic material are developed and applied to the model of sandwich plate by using finite elements. After the presentation of the theoretical foundations of the methodology, the description of a numerical study on the flutter analysis of a three-layer sandwich plate is addressed.

Avaliação da Capacidade Antioxidante e da Estabilidade Após Embalamento a Vácuo de Hambúrgueres de Pata-roxa (Scyliorhinus canicula).

Toneladas de pescado são desperdiçadas diariamente aquando do processamento do peixe e o hambúrguer de pata-roxa foi desenvolvido para reaproveitar esse pescado subvalorizado e para ser uma fonte nutricional rica em antioxidantes. No presente trabalho, pretendeu-se comprovar o potencial antioxidante antes e após o tratamento térmico do hambúrguer de pata-roxa, e o potencial citotóxico e antiproliferativo sobre um modelo celular do cancro da mama (MCF-7). Foi também observada a estabilidade do hambúrguer de pata-roxa embalado a vácuo e refrigerado. A extração dos compostos fitoquímicos foi realizada com solventes de polaridade distinta (água, metanol e diclorometano) e com diferentes durações do processo (12h e 24h). O tratamento térmico aplicado foi vinte minutos a 180ºC. O potencial antioxidante foi avaliado pela capacidade de redução do radical livre 1,1-difenil-2-picrilhidrazil (DPPH) e pela capacidade de redução de radicais de oxigénio (ORAC), e através da quantificação total de polifenóis (QTP) pelo método de Folin-Ciocalteu (FC). O potencial citotóxico e antiproliferativo foi avaliado na linha celular MCF-7, cujos resultados foram revelados por ensaios espectrofotométricos (método do brometo de 3- (4,5-dimetiltiazol-2-il)-2,5-difenil tetrazólio (MTT)) e fluorimétricos (método de acetoxi-metil éster de calceína (calceína-AM)). A estabilidade do hambúrguer de pataroxa em vácuo e refrigerado foi avaliada através do estudo microbiológico com metodologias de referência (contagens de “totais” e produtores de sulfureto de hidrogénio (H2S) aeróbios e anaeróbios, esporos de Clostridium sulfitos-redutores, enterobactérias, Escherichia coli e pesquisa de Salmonella spp.), da determinação do índice de ácido tiobarbitúrico (TBA) e da avaliação da cor do hambúrguer pelo sistema CIE-L*a*b*. Os ensaios de DPPH e ORAC comprovaram a atividade antioxidante do extrato de hambúrguer de pata-roxa (metanol, 12h) com 79,5% de redução do DPPH e 8603,01μmol ET/100g para amostras sem tratamento térmico, e 87,4% de redução do DPPH e 2567,27μmol ET/100g para amostras com tratamento térmico. Quanto ao conteúdo fenólico, os extratos (metanol, 12h) revelaram 17,13mg EAG/100g do hambúrguer cru e 31,81mg EAG/100g do hambúrguer cozinhado. A extração de 24 horas não aumentou a quantidade de compostos fitoquímicos presentes no extrato. O hambúrguer apenas revelou ainda um potencial citotóxico in vitro relevante na linha celular MCF-7 (1mg/mL, 24h).Apesar do abuso observado na temperatura de armazenamento em refrigeração (temperatura média de 10,3ºC), o hambúrguer de pata-roxa cru, quando submetido ao embalamento a vácuo, apresentou um aumento no período de vida útil de prateleira de 4 dias relativamente à pata-roxa. Foi detetada a presença de esporos de Clostridium sulfito-redutores e 1,0x101ufc E. coli por 1g de hambúrguer de pata-roxa. Não foi detetada a presença de Salmonella spp. O índice de TBA manteve-se estável, mas o hambúrguer de pata-roxa sofreu uma perda na vivacidade (Cab) e na tonalidade (hab) da cor ao fim de 6 dias em refrigeração. É necessário continuar o estudo para melhorar o novo produto alimentar funcional, mas o presente trabalho permitiu concluir que o hambúrguer de pata-roxa reúne as condições para ter um elevado potencial antioxidante, apresentar maior estabilidade em armazenamento e, em simultâneo, constituir uma solução para o desperdício de pescado.

Estabilidade de paredes duplas de alvenaria ensaios de eficiência do grampeamento

As paredes de alvenaria não-resistentes têm sido, ao longo do tempo, amplamente utilizadas em fachadas, principalmente como material de enchimento. Este tipo de paredes detêm um papel de elevada importância em sistemas complexos como são os edifícios, uma vez que, separam o interior do ambiente exterior desenrolando um papel chave no desempenho dos edifícios, bem como no conforto dos seus utilizadores. Numa tentativa de aumentar a eficiência energética dos edifícios, vários países têm vindo a utilizar paredes duplas de alvenaria, a fim de criar caixas de ar ou espaços para colocar materiais de isolamento. No entanto, se este tipo de construção não for bem aplicado pode conduzir a patologias ou até mesmo ao colapso das paredes para fora do plano, particularmente devido a forças extremas como os sismos. Esta dissertação tem como objetivo apresentar uma campanha experimental que foi desenvolvida, a fim de investigar a influência do grampeamento em paredes duplas de alvenaria quando submetidas a cargas de compressão. Durante o estudo foram construídos diferentes provetes de paredes duplas de alvenaria onde foram aplicados diferentes tipos e quantidades de grampos. Para além disso, os grampos foram colocados em diferentes posições nas paredes, levando a uma quantidade significativa de variáveis. As cargas axiais aplicadas nos provetes, com o uso de um macaco hidráulico, serviram para averiguar e avaliar o número ideal e posição dos grampos contribuindo, portanto, para entender o cuidado necessário na construção de paredes duplas de alvenaria.

Avaliação da estabilidade físico-química de óleo alimentar suplementado com extrato de carqueja

A prevenção da oxidação lipídica, uma das principais causas de degradação de óleos alimentares, pode ser efetuada pela adição de antioxidantes. A preocupação pelo consumo de alimentos mais saudáveis e isentos de aditivos sintéticos tem contribuído para a crescente procura de antioxidantes naturais provenientes de plantas, que possam substituir os antioxidantes sintéticos em óleos e gorduras alimentares. O presente estudo teve como objetivo avaliar o efeito da adição de extrato de carqueja (Pterospartum tridentatum), em concentrações diferentes (500 mg/kg e 1000 mg/kg), na estabilidade físico-química de óleo alimentar submetido a três ciclos de aquecimento (9 horas cada) a 180ºC e de óleo armazenado à temperatura ambiente durante 30 dias. O extrato de carqueja foi obtido por extração em etanol, tendo-se alcançado um rendimento de 60,2%±0,225. Determinou-se a capacidade antioxidante do extrato de carqueja por avaliação da capacidade de redução do radical 1,1-difenil-2-picrilhidrazil (DPPH) e pelo método de Folin-Ciocalteu. Os resultados demonstraram que o extrato tem uma atividade antioxidante de 61,7%±0,38 e um teor de compostos fenólicos de 22,4 mg de equivalentes de ácido gálico /g de extrato. A estabilidade físico-química do óleo alimentar foi estudada através da análise de diversos parâmetros, nomeadamente acidez, índice de peróxidos, índice de p-anisidina, absorvância no UV, índice de refração, cor e densidade. Os resultados evidenciaram um aumento de todos os parâmetros, com exceção da cor, ao longo do aquecimento do óleo bem como no seu armazenamento à temperatura ambiente. Este aumento foi mais relevante no óleo em processo de aquecimento uma vez que a 180ºC as reações de oxidação ocorrem mais rapidamente do que à temperatura ambiente. Observaram-se alterações mais acentuadas dos parâmetros físico-químicos no óleo sem extrato de carqueja comparativamente ao óleo suplementado com 500mg/kg e 1000mg/kg de extrato, comprovando-se o efeito do extrato de carqueja na redução da oxidação e, consequentemente, no aumento da estabilidade físico-química do óleo alimentar. O óleo suplementado com 1000mg/kg de extrato de carqueja revelou-se o mais estável à oxidação.

O estado como empregador de última instância: uma proposta de pleno emprego, estabilidade e condições dignas de trabalho para o Brasil

GOMES, Z. B. ; LOURENÇO, André Luís Cabral de . Atuação do Estado como empregador de última Instância: uma proposta para eliminar o desemprego estrutural do Brasil. In: Encontro Nacional de Economia Política, 13. 2008, João Pessoa/PB. Anais... João Pessoa: ENEP, 2008.

Estudo numérico e experimental da estabilidade e repartição de carga na tíbia na revisão da ATJ

Este estudo visou a realização de uma análise comparativa da estabilidade e transferência de carga do prato tibial na interface osso-cimento aquando da utilização de diferentes tipos de hastes (press-fit e cimentada) na revisão da artroplastia total do joelho (ATJ).