Families of the traumatically brian-injured : a case study approach to perceptions of quality of service, degree of satisfaction, and family needs /

The purpose of this qualitative research study was to foster an understanding of the rehabilitation counselling practice offamilies of the brain-injured. Specifically, the study explores the perceptions of stakeholders in regards to the degree of satisfaction with the quality of service received. Questionnaires were administered, and semi-structured, openended interviews were conducted, with six participating families (n=8). Preliminary data were collected via two instruments: (i) the Family Participant Questionnaire, consisting of participants' sample characteristics, information pertaining to the history of the family, details of the injury, and information relating to the type, use, and need offamily services utilized; and (ii) the Community Integration Questionnaire, a measurement of the degree of social displacementllevel of community integration of the injured family member. Utilizing the procedural steps outlined by Colaizzi's (1978) method of protocol analysis, recommendations for a future program based on related and current family needs are discussed in detail. Substantiating and supporting information are offered to rehabilitation practitioners, educational planners, and policymakers alike, concerning the degree of satisfaction with rehabilitative service, and the means of improving upon the overall quality of health care to families of the brain-injured. Implications for clinical practice and research are also raised for discussion.

Far infrared reflectance and optical properties of organic superconductor (TMTSF)2ClO4 /

Polarized reflectance measurements of the quasi I-D charge-transfer salt (TMTSFh CI04 were carried out using a Martin-Puplett-type polarizing interferometer and a 3He refrigerator cryostat, at several temperatures between 0.45 K and 26 K, in the far infrared, in the 10 to 70 cm- 1 frequency range. Bis-tetramethyl-tetraselena-fulvalene perchlorate crystals, grown electrochemically and supplied by K. Behnia, of dimensions 2 to 4 by 0.4 by 0.2 mm, were assembled on a flat surface to form a mosaic of 1.5 by 3 mm. The needle shaped crystals were positioned parallel to each other along their long axis, which is the stacking direction of the planar TMTSF cations, exposing the ab plane face (parallel to which the sheets of CI04 anions are positioned). Reflectance measurements were performed with radiation polarized along the stacking direction in the sample. Measurements were carried out following either a fast (15-20 K per minute) or slow (0.1 K per minute) cooling of the sample. Slow cooling permits the anions to order near 24 K, and the sample is expected to be superconducting below 1.2 K, while fast cooling yields an insulating state at low temperatures. Upon the slow cooling the reflectance shows dependence with temperature and exhibits the 28 cm- 1 feature reported previously [1]. Thermoreflectance for both the 'slow' and 'fast' cooling of the sample calculated relative to the 26 K reflectance data indicates that the reflectance is temperature dependent, for the slow cooling case only. A low frequency edge in the absolute reflectance is assigned an electronic origin given its strong temperature dependence in the relaxed state. We attribute the peak in the absolute reflectance near 30 cm-1 to a phonon coupled to the electronic background. Both the low frequency edge and the 30 cm-1 feature are noted te shift towards higher frequcncy, upon cntering the superconducting state, by an amount of the order of the expected superconducting energy gap. Kramers-Kronig analysis was carried out to determine the optical conductivity for the slowly cooled sample from the measured reflectance. In order to do so the low frequency data was extrapolated to zero frequency using a Hagen-Ru bens behaviour, and the high frequency data was extended with the data of Cao et al. [2], and Kikuchi et al. [3]. The real part of the optical conductivity exhibits an asymmetric peak at 35 cm-1, and its background at lower frequencies seems to be losing spectral weight with lowering of the temperature, leading us to presume that a narrow peak is forming at even lower frequencies.

Federal-provincial relations and the environment : attaining sustainable development through cooperation /

A study of intergovernmental relations in the area of the environment will determine whether the current Canadian federal structure represents a dangerous impediment to the promotion of sustainable development. This paper examines the interjurisdictional quagmire that has developed from the fact that authority over the environment is a functionally concurrent field for the two orders of government. A history of federal-provincial relations in the area of environmental protection is followed by an analysis of the advantages and disadvantages associated with competitive and cooperative federalism. For the purpose of this paper, cooperative federalism is characterized by the presence of a formal institutional system to facilitate interaction between politicians and bureaucrats from both orders of government. Competitive federalism is defined as a system that lacks a formal institutional structure to promote discussion and coordination between federal and provincial officials in a specific field of interest. Last, I examine thirty sustainable development issues following the structure established in Agenda 21 to determine the impact of the present federal system on the development of these objectives. This study concludes that Canadian federalism is not a dangerous impediment to the promotion of sustainable development. Cooperative federalism in a form that does not eliminate the ability of governments to revert to competition promotes the emergence of an institutional system that facilitates information-sharing and discussion between the two orders of government, thus leading to coordinated efforts in the field of the environment. Respect for the current division of powers in this area is also essential to the cohesiveness of Canadian society. Policy-makers and advocates for a sustainable society should focus on working within the present system.

Flow injection analysis (FIA) determination of lead by hydride generation in banded coral skeletons /

A flow injection hydride generation direct current plasma atomic emission spectrometric (FI-HG-DCP-AES) method was developed for the determination of lead at ng.ml-l level. Potassium ferricyanide (K3Fe(CN)6) was used along with sodium tetrahydroborate(III) (NaBH4) to produce plumbane (PbH4) in an acid medium. The design of a gas-liquid separator (hydride generator) was tested and the parameters of the flow injection system were optimized to achieve a good detection limit and sample throughput. The technique developed gave a detection limit of 0.7 ng.ml-l(3ob). The precision at 20 ng.ml"* level was 1.6 % RSD with 1 1 measurements (n=l 1). Volume of sample loop was 500 |J.l. A sample throughput of 120 h"^ was achieved. The transition elements, Fe(II), FeOH), Cd(n), Co(II), Mn(n), Ni(II) and Zn(n) do not interfere in this method but 1 mg,l'l Cu(II) will suppress 50 % of the signal from a sample containing 20 ng.ml'l Pb. This method was successfully applied to determine lead in a calcium carbonate (CaC03) matrix of banded coral skeletons from Si-Chang Island in Thailand.

Foraging ecology and parental behaviour in the common tern (Sterna hirundo)

One component of successful parenting is related to efficiency in foraging behaviour. The relationships among chick feeding, the size and type of food package, and length of parental foraging trips has not been well studied in seabirds. In addition, relatively few data have been collected on the activities of seabirds when foraging away from the nest site. The objectives of this study were: (1) to contrast productivity, feeding rate, and attendance patterns of individuals carrying a novel transmitter with a control group of birds; (2) to use radio-telemetry to assess the variability in foraging locations within and between individual male Common Terns; (3) to determine the seasonal variation in chick diet; (4) to determine for each transmittered bird, the relationships among the foraging patterns, parental behaviour, and seasonal reproductive success. The study took place over two years (1990-91) on a concrete breakwater 1 km offshore on Lake Erie near Port Colbome, Ontario. Ten pairs of terns in 1990 and 12 pairs in 1991 were radio-tracked by boat or car during the chick rearing stage. Concurrent behavioural observations documented the time each sex spent foraging or at the nest. The frequency and prey species composition of feeds to chicks were also recorded. The transmitters had negligible effects on the feeding frequency and brood attendance patterns of transmitter carrying birds. Peak nesting transmittered birds in 1990 and 1991 exhibited some inter-individual variability in foraging locations, however intraindividual variability was low. Birds foraged primarily to the west and northwest of the colony. Late nesters exhibited greater inter-individual variability, however intra-individual variability remained low for most birds. Neither group demonstrated sufficient variability to support the regular use of this colony as an "information centre". Individual transmittered birds had unique and predictable foraging patterns, and corresponding differences in feeding frequencies and brood attendance patterns, yet productivity was essentially equal between nests due to the impact and importance of stochastic events. Individuals that were recaptured in 1991 exhibited very similar foraging patterns to 1990, suggesting littie variability between years. Conservation of foraging patterns between years may have potential implications for mate choice decisions in future breeding seasons. Prey species delivered to chicks differed between morning and evening for peak and late nesters in 1990, but not 1991. Peak nesters in 1990 fed significantiy more Rainbow Smelt fOsmerus mordM) than Emerald Shiner (Notropis atherinoidesV this trend was reversed for late nesters who also fed large numbers of unidentified larval fish. No significant differences were found in 1991. Seasonal changes in prey species delivered to chicks is believed to be attributable to the temperature tolerances of the smelt and shiners, and the presence of large schools of larval fish during the late nesting season.

From Fordism to neoconservatism : free trade and Canadian industrial policy in an era of globalism /

Nothing today affects the lives of people in countries throughout the industrialized and developing world as much as international trade. Nowhere is this more true than in Canada. Canada's involvement in international trade has a long history dating back to 1854 when it was a British colony. As a major trading country, Canada has always adopted a proactive industrial policy which has been largely responsible for its relative economic prosperi ty. But, wi th businesses now free to invest and divest under the terms of the CUFTA and the NAFTA, the most fundamental concerns for Canadians, in a borderless world, are what powers will the Canadian government have to shape industrial policy, and to what extent can Canada continue as a viable nationstate if it can no longer control its national economy? These are important concerns because, in world without borders, the adjustment process becomes more volatile and more difficult to manage. The CUFTA and the NAFTA not only create the rules for conducting trade, but they also establish a set of new rules for the Canadian government that will diminish its power. As a member of a new North American trading bloc, Canada will find itself subject to a set of forces requiring analysis beyond participation in a conventional free trade area. Because many of the traditional levers of government will now be subject to external control imposed by these agreements, Canada will not be able to mount certain policies in the future that it has relied on in the past. This reality limits the pro-active role of the Canadian state to use policies and programmes for the country's immediate national development. What this thesis attempts is an examination of the evolution of Canadian industrial policy, in effect, the transi tion from Fordism to Neoconservatism, and an assessment of Canada's future as a nation-state as it tries to find security and improved access in a free trade arrangement. Unless Canada takes steps to neutralize the asymmetry of power between itself and the United States through adjustment programmes, it is the contention of this thesis that its economic future is anything but stable.

From protest to powerlessness : a Marxist analysis of the Ontario NDP /

Using Marxist state theory as an analytical framework, this thesis explains the problems faced by the Ontario New Democratic Party government (1990-1995) in implementing a social democratic agenda. Not only was the government constrained in its ability to implement progressive policy, but it was also pushed to implement a Social Contract (involving legislated wage cuts to public sector employees) that alienated the party's base of support, making it more difficult for the party to organize in the future. Although this study relies predominantly on a reinterpretation of existing research on the topic, some primary research is used in the analysis, including interviews with members of the labour movement and former MPPs and analysis of the news media's treatment of the party/ government. Historical and class analytical perspectives are used to explain the evolution of the ONDP's structure and policies, as well as to assess the relative strength of the working class and its ability to support a social democratic political agenda. It was found that the ONDP' s unwillingness to develop a long term plan for social democracy, and its inability to act as a mass party or to build a strong working class movement, made it more difficult for the party to succeed when it formed the government. Moreover, the class nature of the capitalist state, along with pressure exerted by a well mobilized capitalist class, worked to limit the government' s options.

FT-IR and MAS NMR analysis of montmorillonite K10 supported MF2 reagents and their activity as catalysis /

ZnF2, CdF2, and CUF2 have been adsorbed onto the surface of montmorillonite K10, and the infrared and 19F, 27 AI, and 29Si MAS NMR spectra of the reagents over a range of loadings have been obtained. CUF2 was observed to attack the Si02 layer and form the complex CuSiF6, Zn F2 tends to attack the aluminium oxide layer, in which Zn isomorphously replaces AI, and forms AIF3 and AIF4 - complexes. All the spectroscopic evidence ruled out the formation of any AI-F and/or Si-F free species as CdF2 is adsorbed on the surface of montmorillonite K10. The reactivity of MF2-K10 reagents towards Friedel-Crafts benzylation of benzene with benzyl chloride varied from one reagent to another. ZnF2-K10 was observed to be the most reactive and CUF2 was the least reactive.

Geochemistry and mineralogical association of heavy metal contaminants in fine grained sediment, Welland River, Southern Ontario /

This investigation of geochemistry and mineralogy of heavy metals in fine grained (<63^m) sediment of the Welland River was imdertaken to: 1) describe metal dispersion patterns relative to a source, identify minerals forming and existing at the outfall region and relate sediment particle size to chemistry; 2) to delineate sample handling, preparation and evaluate, modify and develop analytical methods for heavy metal analysis of complex environmental samples. Ajoint project between Brock University and Geoscience Laboratories was initiated to test a contaminated site of the Welland River at the base of Atlas Speciality Steels Co. Methods were developed and utilized for particle size separation and two acid extraction techniques: 1) Partial extraction; 2) Total extraction. The mineralogical assessment identified calcite, dolomite, quartz and clays. These minerals are typical of the carbonate-shale rock basement of the Niagara Peninsula. Minerals such as, mullite and ferrocolumbite were found at the outfall region. These are not typical of the local geology and are generally associated with industrial pollutants. Partial and total extraction techniques were used to characterize the sediments based on chemical distribution, elemental behaviour and analytical differences. The majority of elements were lower in concentration in the partial extraction technique; suggesting these elements are bound in an acid extractable phase (exchangeable, organic and carbonate phases). The total extraction technique yielded higher elemental concentrations taking difficult oxides and silicates into solution. Geochemical analyses of grain size separates revealed that heavy metal (Co, Ni, V, Mn, Fe, Ba) concentrations did not increase with decreasing grain size. This is a function of the anthropogenic mill scale input into the river. The background elements (Sc, Y, Sr, Mg, Al and Ti) showed an increase in concentration to the finest grain size suggesting that it is directly related to the local mineralogy and geology. Dispersion patterns ofmetals fall into two distinct categories: 1) the heavy metals (Co, Cu, Ni, Zn, V and Cr), and 2) the background elements (Be, Sc, Y, Sr, Al and Ti). The heavy metals show a marked increase in the outfall region, while the background elements show a significant decrease at the outfall. This pattern is attributed to a "dilution effect" ofthe natural sediments by the anthropogenic mill scale sediments. Multivariant statistical analysis and correlation coefficient matrix results clearly support these results and conclusions. These results indicate the outfall region ofthe Welland River is highly contaminated with to heavy metals from the industrialized area of Welland. A short distance downstream, the metal concentrations return to baseline geochemical levels. It appears, contaminants rapidly come out of suspension and are deposited in close proximity to the source. Therefore, it is likely that dredging the sediment from the river may cause resuspension of contaminated sediments, but may not distribute the sediment as far as initially anticipated.