1000 resultados para Degradação Ambiental
Resumo:
The environmental impact of detergents and other consumer products is behind the continued interest in the chemistry of the surfactants used. Of these, linear alkylbenzene sulfonates (LASs) are most widely employed in detergent formulations. The precursors to LASs are linear alkylbenzenes (LABs). There is also interest in the chemistry of these hydrocarbons, because they are usually present in commercial LASs (due to incomplete sulfonation), or form as one of their degradation products. Additionally, they may be employed as molecular tracers of domestic waste in the aquatic environment. The following aspects are covered in the present review: The chemistry of surfactants, in particular LAS; environmental impact of the production of LAS; environmental and toxicological effects of LAS; mechanisms of removal of LAS in the environment, and methods for monitoring LAS and LAB, the latter in domestic wastes. Classical and novel analytical methods employed for the determination of LAS and LAB are discussed in detail, and a brief comment on detergents in Brazil is given.
Resumo:
Iron, copper and lead distribution was evaluated in sediment cores from a disturbed mangrove area in Guanabara Bay: a core from a seaward site where mangrove vegetation was removed ~20 yr before sampling (MD); a core from an intermediate site with dead vegetation, apparently due to insect attack (MP), and a core from a landward site with living vegetation (MV). Metal concentrations showed increasing values seaward while organic matter content showed an inverse trend, displaying a negative correlation with metals. This unusual correlation indicates opposite sources, since metals come from the bay and the main OM origin is probably degraded mangrove vegetation. Plant cover loss seems to be a critical factor affecting metal accumulation, particularly due to changes in OM input.
Resumo:
Fundamental aspects of the conception and applications of ecomaterials, in particular porous materials in the perspective of green chemistry are discussed in this paper. General recommendations for description and classification of porous materials are reviewed briefly. By way of illustration, some case studies of materials design and applications in pollution detection and remediation are described. It is shown here how different materials developed by our groups, such as porous glasses, ecomaterials from biomass and anionic clays were programmed to perform specific functions. A discussion of the present and future of ecomaterials in green chemistry is presented along with important key goals.
Resumo:
Environmental concern is growing in the current days and there is global agreement to banish production and use of persistent organic pollutants (POP). The synthetic insecticides chlordecone and mirex, classified as POPs, have similar structures and they are potentially toxic. This work uses properties and physicochemical constants related to the pesticides and computational simulation to evaluate the leach phenomenon and persistency in soil. The largest tendency of persistence of the compound is found to be in the surface of soil, but even low concentration in water represents a high risk due to bioaccumulation in adipose tissue.
Resumo:
In order to ascertain the impact of agricultural activities on water quality of the Ribeira de Iguape River Basin in the state of São Paulo, surface water areas for catchment and drinking water have been characterized. The sampling period covered March/2002 - February/2003 and January/2004 at 10 different catchment points. SPE-LC-UV/Vis was used to monitor various pesticide classes such as carbamates, triazines and nitroanilines. The results revealed that water quality is associated with seasonal variation. Of 152 samples analyzed, only 24% showed the presence of pesticides, particulary during the wet season. High variability in pH, turbidity and color were observed.
Resumo:
Phosphorus geochemistry as a proxy of environmental estuarine processes at the Jaguaribe River, Northeastern Brazil. Sedimentation of different phosphorus geochemical fractions can characterize the natural or anthropogenic processes dominant in the watershed. Selective chemical extraction of different phosphorus geochemical forms in estuarine sediments showed the predominance of inorganic over organic forms suggesting an increase in inorganic phosphorus input from anthropogenic sources. Local hydrochemistry favors the dominance of inorganic ferric and carbonatic phosphorus. Ongoing changes in the estuarine throphy, from mesothrophic to euthrophic, may decrease the immobilization of these forms, increasing dissolved phosphorus and favoring euthrophy. Detritic phosphorus suggests a fluvial origin of this fraction and acts as a tracer of river influence upon the estuary.
Resumo:
Destruction of Padron® (dye and picloram) was evaluated using a photoreactor and a solar reactor. Photolysis was observed using only a germicide lamp (GL). Black light (BL) and H2O2 (172 mmol L-1) promoted a conversion of 49% and 6% of dye and picloram, respectively. Photocatalytic processes were more efficient using TiO2/GL (96%-dye; 60%-picloram) than TiO2/BL (44%-dye; 40%-picloram). Photolysis using sunlight was not observed during PadronÒ recirculation in the reactor constructed with four borosilicate tubes. Meanwhile, adding H2O2 resulted in 12% conversion of dissolved organic compounds. Finally, the most efficient mineralization (60%) was obtained using the Fenton reaction ( H2O2-176 mmol L-1; FeSO4x6H2O-90 mmol L-1) and sunlight.
Resumo:
A method for determining copper by solid phase spectrophotometry (SPS) was optimized using the Doehlert design. Copper(II) was sorbed on a styrene-divinylbenzene anion-exchange resin as a Cu(II)-1-(2-pyridylazo)-2-naphthol (PAN) complex, at pH 7.0. Resin phase absorbances at 560 and 800 nm were measured directly. The detection limit was found to be 2.5 µg L-1. The relative standard deviation on ten replicate determinations of 10 µg Cu(II) in 1000 mL samples was 1.1%. The linear range of the determination was 5.0-100 µg L-1. The method was applied successfully to the determination of Cu(II) in natural water and vegetable samples.
Resumo:
Electron stimulated ion desorption (ESID) and degradation studies of polypyrrole doped with dodecylsulfate (PPy/DS) deposited on FTO were performed using time-of-flight mass spectrometry (TOF-MS) for ion analysis. The results suggest a strong contribution from fragments of the dodecylsulfate hydrocarbon chain to the mass spectra. In the 650-1500 eV energy range the ion yield curves show maxima at about 600, 1200 and 1400 eV, which can be related to carbon, nitrogen and oxygen-containing fragments, respectively, and interpreted in terms of the Auger Stimulated Ion Desorption (ASID) mechanism. Degradation studies indicate rapid loss of heavier hydrocarbons and an increase of bulk and substrate fragments. Some degradation profiles suggest formation of new species.
Resumo:
En el presente artículo se hace un breve repaso de las circunstancias académicas, institucionales y de algunos de los avatares que han venido sucediendo hasta dar lugar a la constitución de la Asociación de Psicología Ambiental (PSICAMB) y sus primeros años. Junto a este recorrido, también se ha prestado atención a los trabajos que se han presentado en las doce jornadas y congresos bianuales que se han celebrado hasta la actualidad. Para ello se ha llevado a cabo un análisis de contenido de los 1065 títulos recogidos en estos eventos. Por lo que respecta al nivel de participación se observa que cada vez este es más alto tanto en el número trabajos presentados cómo en los autores que los avalan. Por lo que respecta al análisis de los títulos, se observó que las quince categorías utilizadas se subsumían en cinco: 'aspectos teóricos, conceptuales y metodológicos', 'medio construido' 'medio natural' la 'psicología de la conservación' 'los riesgos y los desastres'. Los resultados del análisis muestran un alto volumen en cada una de estas categorías salvo en el 'medio natural' y se observa como con el devenir de los años se ha ido prestando atención más a unos temas que a otros.
Resumo:
The importance of urban solid waste integrated systems is characterized by the several components of these systems, which are, basically, formed by physical, chemical and biological methods. This article, characterizes these methods and, which is also important, identifies the several and potential environmental impacts of those techniques. It's also extremely important to make a study of the economic rentability of those infrastructures and, also, characterize the quantitative energetic contributions of some components of these systems. This study was analysed and their results are presented in this article.
Resumo:
During short courses, 95 secondary school teachers from 49 state schools and 421 students from the Ribeirão Preto region (in Sao Paulo state, Brazil, with a population of 530,000) were asked to fill in different questionnaires. The points raised in the teacher's questionnaire were used as a guide to establish a continuous dialogue during the short courses. Most of the schools claimed to have some kind of environmental education (EE). Based on the questionnaires and dialogues we analyzed how the teachers' perceptions on EE reflect on the views secondary students hold about their own responsibility for preserving the environment. The role of universities in the preparation of chemistry teachers capable of effectively approaching EE is also discussed.
Resumo:
In this work Fenton and photo-Fenton processes for textile dye degradation were investigated using iron (II) immobilized in alginate spheres. Photomicrographs obtained by scanning electron microscopy showed an irregular and porous surface with a homogeneous distribution of iron. The Fenton process was used to evaluate the degradation efficiency of reactive dyes and this procedure showed a low degradation effect. The association of artificial visible light or solar radiation in the Fenton process (foto-Fenton process) showed degradation ratios of 70 and 80% respectively in 45 min. It was also observed that the iron-alginate matrix can be reused.
Resumo:
Three technologies were tested (TiO2/UV, H2O2/UV, and TiO2/H2O2/UV) for the degradation and color removal of a 25 mg L-1 mixture of three acid dyes: Blue 9, Red 18, and Yellow 23. A low speed rotating disc reactor (20 rpm) and a H2O2 concentration of 2.5 mmol L-1 were used. The dyes did not significantly undergo photolysis, although they were all degraded by the studied advanced oxidation processes. With the TiO2/H2O2/UV process, a strong synergism was observed (color removal reached 100%). Pseudo first order kinetic constants were estimated for all processes, as well as the respective apparent photonic efficiencies.