A comparative generational analysis of a cultural event

Like most products, special events are marketed to specific target markets. One such event, however, held in Melbourne, Australia, in May 2005, was marketed more broadly to the Melbourne community. The cultural event was developed to stimulate discussion, which one social commentator noted is currently deficient …‘there is a prevailing element of defensiveness, wariness and caution in our public discourse’ (Jones, 2005). The event sought to fill this void in community life and encouraged members of cross-sections of the community to participate in the event. One evaluative measure of success of the event was, therefore, the post-consumption evaluations of attendees. By using generational segments (ie. Traditionalists, Baby-boomers, Generation X and the Millennials) as the bases of comparison, few statistically significant differences were found with regard to post-consumption evaluations of the event. It is, therefore, not unreasonable to conclude that the event was successful in that the generational segments were generally homogenous with regard to the post-consumption evaluations of the event. The results, however, provide opportunities for improvement in the event’s marketing and management in the future.

The effects of exercise and adipose tissue lipolysis on plasma adiponectin concentration and adiponectin receptor expression in human skeletal muscle

Objective: It has been suggested that adiponectin regulates plasma free fatty acid (FFA) clearance by stimulating FFA uptake and/or oxidation in muscle. We aimed to determine changes in plasma adiponectin concentration and adiponectin receptor 1 and 2 mRNA expression in skeletal muscle during and after prolonged exercise under normal, fasting conditions (high FFA trial; HFA) and following pharmacological inhibition of adipose tissue lipolysis (low FFA trial; LFA). Furthermore, we aimed to detect and locate adiponectin in skeletal muscle tissue. Methods: Ten subjects performed two exercise trials (120 min at 50% VO2max). Indirect calorimetry was used to determine total fat oxidation rate. Plasma samples were collected at rest, during exercise and during post-exercise recovery to determine adiponectin, FFA and glycerol concentrations. Muscle biopsies were taken to determine adiponectin protein and adiponectin receptor 1 and 2 mRNA expression and to localise intramyocellular adiponectin. Results: Basal plasma adiponectin concentrations averaged 6.57±0.7 and 6.63±0.8 mg/l in the HFA and LFA trials respectively, and did not change significantly during or after exercise. In the LFA trial, plasma FFA concentrations and total fat oxidation rates were substantially reduced. However, plasma adiponectin and muscle adiponectin receptor 1 and 2 mRNA expression did not differ between trials. Immunohistochemical staining of muscle cross-sections showed the presence of adiponectin in the sarcolemma of individual muscle fibres and within the interfibrillar arterioles. Conclusion: Plasma adiponectin concentrations and adiponectin receptor 1 and 2 mRNA expression in muscle are not acutely regulated by changes in adipose tissue lipolysis and/or plasma FFA concentrations. Adiponectin is abundantly expressed in muscle, and, for the first time, it has been shown to be present in/on the sarcolemma of individual muscle fibres.

Korean 'Chung-soh' and Australian contemporary dance

This project investigated a characteristic concept of Korean culture, "Chung-soh", to develop an understanding a 'Korean-ness' in dance and of how "Chung-soh" informs cross-cultural dance processes involving Korean and Australian artists. At the same time the author developed her artistic identity through investigating and understanding her dance practice. The DVDs contain 2 works choreographed by the author: Cross sections and Embryo.

Polyethylene terephthalate (PET) bulk film analysis using C60+, Au3+, and Au+ primary ion beams

The damage characteristics of polyethylene terephthalate (PET) have been studied under bombardment by C₆₀+, Au₃+ and Au+ primary ions. The observed damage cross-sections for the three ion beams are not dramatically different. The secondary ion yields however were significantly enhanced by the polyatomic primary ions where the secondary ion yield of the [M + H]+ is on average 5× higher for C₆₀+ than Au₃+ and 8× higher for Au₃+ than Au+. Damage accumulates under Au+ and Au₃+ bombardment while C₆₀+ bombardment shows a lack of damage accumulation throughout the depth profile of the PET thick film up to an ion dose of 1 ~ 10¹⁵ ions cm⁻². These properties of C₆₀+ bombardment suggest that the primary ion will be a useful molecular depth profiling tool.

Relationship between indices of adiposity obtained by peripheral quantitative computed tomography and dual-energy X-ray absorptiometry in pre-pubertal children

Background/Aim: The study investigated the relationship between indices of adiposity measured by peripheral quantitative computed tomography (pQCT) and dual-energy X-ray absorptiometry (DXA) in pre-pubertal children.

Subjects and methods: DXA-derived per cent body fat (%BF) was measured in 284 boys and 288 girls, aged 7–10 years. Cross-sections of the forearm (n=427) and lower leg (n=560) were obtained by pQCT to measure total cross-sectional area of the limb (Total CSA), Muscle CSA, Fat CSA, %Fat CSA (Fat CSA/Total CSA×100) and muscle density.

Results: Peripheral QCT-derived %Fat CSA in the forearm and lower leg correlated strongly with DXA-derived %BF (r=0.83–0.89, p<0.01) in both boys and girls. However, forearm and lower leg %Fat CSA were higher than whole body %BF by 5% and 10%, respectively. A better prediction of whole-body %BF was achieved by including %Fat CSA, muscle density and height into a hierarchical regression model. Using sex-specific regression equations, 87.7% of the boys and 83.7% of the girls had a predicted %BF within 3% units of the %BF obtained by DXA.

Conclusion: In pre-pubertal children, pQCT measures of adiposity are strongly associated with whole-body per cent body fat. This reproducible method could be an alternative technique to estimate body composition in this population.

Exercise loading and cortical bone distribution at the tibial shaft

Cortical bone is not a uniform tissue, and its apparent density [cortical volumetric density (vBMD)] varies around the bone cross-section as well as along the axial length of the bone. It is not yet known, whether the varying vBMD distribution is attributable to modulation in the predominant loads affecting bone. The aim of the present study was to compare the cortical bone mass distribution through the bone cortex (radial distribution) and around the center of mass (polar distribution) among 221 premenopausal women aged 17–40 years representing athletes involved in high impact, odd impact, high magnitude, repetitive low impact, repetitive non-impact sports and leisure time physical activity (referent controls). Bone cross-sections at the tibial mid-diaphysis were assessed with pQCT. Radial and polar vBMD distributions were analyzed in three concentric cortical divisions within the cortical envelope and in four cortical sectors originating from the center of the bone cross-section. MANCOVA, including age as a covariate, revealed no significant group by division/sector interaction in either radial or polar distribution, but the mean vBMD values differed between groups (P < 0.001). The high and odd-impact groups had 1.2 to 2.6% (P < 0.05) lower cortical vBMD than referents, in all analyzed sectors/divisions. The repetitive, low-impact group had 0.4 to 1.0% lower (P < 0.05) vBMD at the mid and outer cortical regions and at the anterior sector of the tibia. The high magnitude group had 1.2% lower BMD at the lateral sector (P < 0.05). The present results generate a hypothesis that the radial and polar cortical bone vBMD distributions within the tibial mid-shaft are not modulated by exercise loading but the mean vBMD level is slightly affected.

Direction-specific diaphyseal geometry and mineral mass distribution of tibia and fibula: A pQCT study of female athletes representing different exercise loading types

Bones adapt to prevalent loading, which comprises mainly forces caused by muscle contractions. Therefore, we hypothesized that similar associations would be observed between neuromuscular performance and rigidity of bones located in the same body segment. These associations were assessed among 221 premenopausal women representing athletes in high-impact, odd-impact, highmagnitude, repetitive low-impact, and repetitive nonimpact sports and physically active referents aged 17–40 years. The whole group mean age and body mass were 23 (5) and 63 (9) kg, respectively. Bone cross sections at the tibial and fibular mid-diaphysis were assessed with peripheral quantitative computed tomography (pQCT). Density-weighted polar section modulus (SSI) and minimal and maximal crosssectional moments of inertia (Imin, Imax) were analyzed. Bone morphology was described as the Imax/Imin ratio. Neuromuscular performance was assessed by maximal power during countermovement jump (CMJ). Tibial SSI was 31% higher in the high-impact, 19% in the odd-impact, and 30% in the repetitive low-impact groups compared with the reference group (P\0.005). Only the high-impact group differed from the referents in fibular SSI (17%, P\0.005). Tibial morphology differed between groups (P = 0.001), but fibular morphology did not (P = 0.247). The bone-bygroup interaction was highly significant (P\0.001). After controlling for height, weight, and age, the CMJ peak power correlated moderately with tibial SSI (r = 0.31, P\0.001) but not with fibular SSI (r = 0.069, P = 0.313). In conclusion, observed differences in the association between neuromuscular performance and tibial and fibular traits suggest
that the tibia and fibula experience different loading

Modelling the combined effect of grain size and grain shape on plastic anisotropy of metals

Within each columnar grain of a metallic film, the resistance to dislocation glide varies in function of the orientation of the slip plane with regard to the grain long axis. Plastic slip is impeded across grain boundaries and this contributes to the anisotropy of the overall mechanical response. A simplified (Taylor-type) crystal plasticity model is proposed that accounts for such effect of grain shape on the slip system selection. Assuming that dislocation density gradients are normal to the grain boundaries, backstresses developed at the onset of plasticity are estimated based on two definitions of the effective grain boundary spacing ‘‘seen’’ by individual slip systems. The first one reduces to the mean area-to-perimeter ratio of cross-sections of the grain cut parallel to the slip plane. Closed-form expressions of the average backstresses developed inside grains with spheroidal shapes are introduced in the crystal hardening law. The model reproduces the very high plastic anisotropy of electro-deposited pure iron with a strong c-fiber and a refined columnar grain structure [Yoshinaga, N., Sugiura, N., Hiwatashi, S., Ushioda, K., Kada, O., 2008. Deep drawability of electro-deposited pure iron having an extremely sharp h111i//ND texture. ISIJ Int. 48, 667–670]. It also provides valid estimates of the texture development and the influence of grain size on the yield strength.

The reliability of muscle biopsies taken from vastus lateralis

The purpose of this study was to examine whether a single biopsy sample of vastus lateralis could provide an accurate estimate of capillary density (CD) which is indicative of the entire muscle, or whether capillary density is distributed unevenly and varies with muscle depth. Whole muscle cross sections of vastus lateralis were excised post mortem (n=11) for analysis of capillary density at three muscle depths, (superficial, mid and deep regions). Muscle thickness varied widely (17–79mm) across subjects. The distribution of CD throughout the depth of the muscle was homogeneous in 8 subjects, but in 3 subjects it was heterogeneous (p<0.05). In 3 of these subjects there was a significant (p<0.05) effect of sample depth on CD. These data indicate that tissue from a single biopsy will not adequately represent the CD of the entire vastus lateralis in some individuals. Single biopsies from unspecified muscle depth, have routinely been used to estimate CD and fibre type in vastus lateralis. The present study indicates that a more reliable method of analysis would be to use the tissue from two needle biopsies taken at the superficial and deep portions of the muscle from a group of at least 10 subjects. Sampling theory analysis supported this conclusion.

Focused ion beam milling of carbon nanotube yarns and bucky-papers : correlating their internal structure with their macro-properties

Focused ion beam (FIB) milling through carbon nanotube (CNT) yarns and bucky-papers followed by scanning electron microscopy has recently emerged as a powerful tool for eliciting details of their internal structure. The internal arrangement of CNTs in bucky-papers and yarns directly affects their performance and characteristics. Consequently this information is critical for further optimisation of these structures and to tailor their properties for specific applications. This chapter describes in detail FIB milling of CNT yarns and bucky-papers and gives a range of examples where FIB milling has enabled a better understanding of how processing conditions and treatments affect the internal structure. Emphasis is placed on how FIB milling elucidates the influence of fabrication conditions on the internal arrangement of CNTs and how this influences the material's macroscopic properties.

Qualitative spectroscopic characterization of the matrix-silane coupling agent interface across metal fibre reinforced ion exchange resin composite membranes

The characterization of novel metal reinforced electro-dialysis ion exchange membranes, for water desalination, by attenuated total reflectance Fourier transform infrared spectroscopy mapping is presented in this paper. The surface of the porous stainless steel fibre meshes was treated in order to enhance the amount of surface oxide groups and increase the material hydrophilicity. Then, the metal membranes were functionalized through a sol-gel reaction with silane coupling agents to enhance the affinity with the ion exchange resins and avoid premature metal oxidation due to redox reactions at the metal-polymer interface. Polished cross sections of the composite membranes embedded into an epoxy resin revealed interfaces between metallic frameworks and the silane layer at the interface with the ion exchange material. The morphology of the metal-polymer interface was investigated with scanning electron microscopy and Fourier transform infrared micro-spectroscopy. Fourier transform infrared mapping of the interfaces was performed using the attenuated total reflectance mode on the polished cross-sections at the Australian Synchrotron. The nature of the interface between the metal framework and the ion exchange resin was shown to be homogeneous and the coating thickness was found to be around 1 μm determined by Fourier transform infrared micro-spectroscopy mapping. The impact of the coating on the properties of the membranes and their potential for water desalination by electro-dialysis are also discussed.

An extension of the flower pattern diagram for roll forming

The initial process design of a roll forming system is often based on the traditional ‘flower pattern diagram’. In this diagram, the cross sections of the strip at each roll stand are superimposed on a single plane; the diagram is a 2D representation of the 3D process. In the present work, the flower pattern is extended into three dimensions. To demonstrate the method, the forming path or trajectory of a point at the edge of the strip during forming a V-section is considered. The forming path is a surface curve that lies on a cylindrical surface having its axis along the machine axis. This surface is unwrapped to give its plane development and important features of the forming process can be determined and are readily interpreted from this plane curve. It is shown that at any stage in the process, the axial strain and the curvature of the sheet adjacent to the point are dependent on the slope of the trajectory in this plane projection. This new diagram, which apparently has not been used previously, provides a useful initial method of examining the roll forming process and optimising the flower pattern. The model is purely geometric, as is the original flower pattern approach, and does not include the effect of material behaviour. The concept is applied to several cases available in the literature. It shows that the lowest level of shape defect in the part is achieved when the trajectory of the strip edge follows the shortest line length between the start and finish of forming, leading to the least longitudinal strain introduced in the flange. This trend is in agreement with previous experimental observations, suggesting that the analytical model proposed may be applied for early process design and optimisation before time-consuming numerical analysis is performed.

Fabrication of polymeric microchannels with focused and defocused CO2 lasers

 The control of energy distribution or energy intensity inside a laser spot using a defocusing method enables the formation of high-quality microchannels of multiple cross-sections in polycarbonate. Moreover, a thermal mathematical model of the process was developed to aid understanding of the process and to allow channel topology prediction.

Inovação e capital humano: uma aplicação de testes de cointegração em dados em painel

O objetivo do trabalho é investigar a relação de longo prazo entre capital e inovação, utilizando técnicas econométricas mais recentes, com dados em painel. Diversos testes alternativos de cointegração foram utilizados, como testes com coeficientes comuns e idiossincráticos entre os cross-sections (testes de Pedroni, de Kao e de Fischer), e testes onde a hipótese de cointegração é nula (teste de McCoskey e Kao), incluindo testes com quebras estruturais (teste de Westerlund). As conclusões principais são a evidência forte de que estoque de capital humano afeta de forma significativa o número de inovações. Tabém foram encontradas evidências de que a hierarquia de educação importe para o aumento de inovações.

What causes violent crime?

This study uses a new data set of crime ratesfor a large sample of countriesfor the period 1970- 1994, based on information from the United Nations World Crime Surveys, to ana/yze the determinants ofnational homicide and robbery rates. A simple model of the incentives to commit crimes is proposed, which explicit/y considers possible causes of the persistence of crime over time (criminal inertia). Several econometric mode/s are estimated, attempting to capture the . determinonts of crime rates across countries and over time. The empirical mode/s are first run for cross-sections and then applie'd to panel data. The former focus on erplanatory variables that do not change markedly over time, while the panel data techniques consider both the eflect of the business cyc1e (i.e., GDP growth rate) on the crime rate and criminal inertia (accountedfor by the inclusion of the /agged crime rate as an explanatory variable). The panel data techniques a/so consider country-specific eflects, the joint endogeneity of some of the erplanatory variables, and lhe existence of some types of measurement e"ors aJjlicting the crime data. The results showthat increases in income inequality raise crime rates, dete"ence eflects are significant, crime tends to be counter-cyclical, and criminal inertia is significant even after controlling for other potential determinants of homicide and robbery rates.