MOS and bipolar gated thyristor: A thyristor with IGBT switching characteristics

The IGBT has become the device of choice in many high-voltage-power electronic applications, by virtue of combining the ease of MOS gate control with an acceptable forward voltage drop. However, designers have retained an interest in MOS gated thyristor structures which have a turn-off capability. These offer low on-state losses as a result of their latching behaviour. Recently, there have been various proposals for dual-gate devices that have a thyristor on-state with IGBT-like switching. Many of these dual gated structures rely on advanced MOS technology, with inherent manufacturing difficulties. The MOS and bipolar gated thyristor offers all the advantages of dual gated performance, while employing standard IGBT processing techniques. The paper describes the MBGT in detail, and presents experimental and simulation results for devices based on realistic commercial processes. It is shown that the MBGT represents a viable power semiconductor device technology, suitable for a diverse range of applications. © IEE, 1998.

Improving discharge characteristics of indirect integral collector storage systems with multi-element storage

Desired performance of unpressurized integral collector storage systems hinges on the appropriate selection of storage volume and the immersed heat exchanger. This paper presents analytical results expressing the relation between storage volume, number of heat exchanger transfer units and temperature limited performance. For a system composed of a single storage element, the limiting behavior of a perfectly stratified storage element is shown to be superior to a fully-mixed storage element, consistent with more general analysis of thermal storage. Since, however, only the fully-mixed limit is readily obtainable in a physical system, the present paper also examines a division of the storage volume into separate compartments. This multi-element storage system shows significantly improved discharge characteristics as a result of improved elemental area utilization and temperature variation between elements, comparable in many cases to a single perfectly-stratified storage element. In addition, the multi-element system shows increased robustness with respect to variations in heat exchanger effectiveness and initial storage temperature.

The influence of peel angle on the mechanics of peeling flexible adherends with arbitrary load-extension characteristics

The peel test is commonly used to determine the strength of adhesive joints. In its simplest form, a thin flexible strip which has been bonded to a rigid surface is peeled from the substrate at a constant rate and the peeling force which is applied to the debonding surfaces by the tension in the tape is measured. Peeling can be carried out with the peel angle, i.e. the angle made by the peel force with the substrate surface, from any value above about 10° although peeling tests at 90 and 180° are most common. If the tape is sufficiently thin for its bending resistance to be negligibly small then as well as the debonding or decohesion energy associated with the adhesive in and around the point of separation, the relation between the peeling force and the peeling angle is influenced both by the mechanical properties of the tape and any pre-strain locked into the tape during its application to the substrate. The analytic solution for a tape material which can be idealised as elastic perfectly-plastic is well established. Here, we present a more general form of analysis, applicable in principle to any constitutive relation between tape load and tape extension. Non-linearity between load and extension is of increasing significance as the peel angle is decreased: the model presented is consistent with existing equations describing the failure of a lap joint between non-linear materials. The analysis also allows for energy losses within the adhesive layer which themselves may be influenced by both peel rate and peel angle. We have experimentally examined the application of this new analysis to several specific peeling cases including tapes of cellophane, poly-vinyl chloride and PTFE. © 2005 Elsevier Ltd. All rights reserved.

Evaluation of biochemical characteristics of a traditional salt fermented fish product of northeast India with special reference to its flavour components

'Lona ilish', is a traditional salt fermented fish product, widely consumed and very popular in north-east part of India and Bangladesh. It is prepared exclusively from a high fat fish, Hilsa (Tenualosa) ilisha. 'Lona ilish' was prepared in the laboratory following traditional process. After 150 days of fermentation, a better quality 'lona ilish' was obtained. Biochemical characteristics of market sample was estimated and compared with the laboratory prepared one. A variation in biochemical composition was observed. Sensory quality of the final product of laboratory prepared 'lona ilish' was compared with the market sample and found that the laboratory prepared product scored better than the market sample. The moisture (49.89%) and salt (15.48%) of the final product was found to be satisfactory for stability of the 'lona ilish' at ambient temperature. Analysis of volatile compounds of 'lona ilish' was done using GC-MS. It was concluded that, aldehydes, ketones and esters may possibly contribute characteristic aromas to the overall flavour of the salt fermented hilsa.

Management of the nile perch, Lates niloticus, fishery in Lake Victoria in light of the changes in its life history characteristics

Nile perch, Lates niloticus Linnaeus, 1758, is a predatory fish of high commercial and recreational value. It can grow to a length of 2 m and a weight of 200 kg. In Uganda, Nile perch was originally found only in Lake Albert and the River Nile below Murchison Falls. The species is, however, widely distributed in Africa, occurring in the Nile system below Murchison Falls, the Congo, Niger, Volta, Senegal and in Lakes Chad and Turkana (Greenwood 1966).

Scale characteristics in relation to size in cichlid fish, Oreochromis mossambicus

Teleostean scale characteristics like length, width, number of circuli, primary radii, secondary radii and ctenii were studied to delineate its relationship with total length in a euryhaline fish, Oreochromis mossambicus (perciformes: cichlidae). Statistical analysis proved a positive correlation between the scale characteristics and fish size. The characteristics of midlateral scales indicated that these scales appeared first during squamation chronology. Further observations also indicated that differences in salinity could modify the morphometries of scales.

Cephalopod fishery at Kakinada along the east coast of India: Resource characteristics and stock assessment of Loligo duvauceli ·

At Kakinada along the east coast of India, cephalopods were exploited by trawls. Fishery occurred round the year with peak during August-October. Peak abundance and fishery of cuttlefishes coincides with this period, whereas for squids it is during March-May. Cephalopod production continued to increase initially with fishing effort, until 1995, but declined thereafter despite increased fishing effort and expansion of fishing to deeper waters. Fishery, growth, mortality, recruitment pattern and exploitation rates of Loligo duvauceli were studied. Nearly 97% of their catch was by zero year groups. They attain sexual maturity and spawn during the first year itself. Spawning occurred round the year with peak during December-February. Exploitation rate of the species is large, 0.741 compared to Emax (0.44). This indicated that their stock is under heavy fishing pressure and subjected to over-exploitation. Stock also exhibited declining trend over the years during 1995-'99. These necessitate immediate attention to avoid coHapse of the stock and fishery.

Fishery, population characteristics and stock assessment of cuttlefishes, Sepia aculeata and Sepia pharaonis at Kakinada along the east coast of India

Cuttlefishes were exploited exclusively by trawls along the coast. Growth, recruitment, mortality and exploitation rates of Sepia aculeata and Sepia pharaonis were studied. Fishery of the former was supported mainly by zero year and the latter by zero and one + age groups. Both attain sexual maturity during the first year itself and spawn during August-March with peak during November-December. Natural mortality of S.aculeata was 2.22, fishing mortality 2.34 and total mortality 4.56. It was 1.69, 1.97 and 3.66 respectively for S.pharaonis. Exploitation rate was 0.52 and Emax 0.72 for S.aculeata and it was 0.54 and 0.76 respectively for S.pharaonis. Their mortality and exploitation rates indicated that stock remains under-exploited and have considerable scope for improving the production. However, both stock and catch exhibited wide annual fluctuation with declining trend during the period. These necessitated immediate attention including measures to minimise juvenile exploitation for improving stock and fishery.

Morphometric characteristics and meristic traits of Tilapia zillii from three major dams of a southwestern state, Nigeria

Tilapia zillii was examined in three major dams in Ekiti State, Nigeria (Ureje dam, Ado, Egbe dam and Ero dam) for their morphometric characteristics and meristic traits. The results showed that the average body weight of the fish sampled were 145.86±50.06g in Ado, 30.19±9.35g in Egbe and 40.58±52.30g in Ero dam. Average total lengths were 21.29±3.20cm, 12.32±1.74cm and 11.24±1.56cm for Ado, Egbe and Ero dam respectively. The relationship between average weight and length of T. zillii showed that Y=15.202X-179.33 (R2=0.7181), Y=4.40049±-24.075 (R2=0.6708) and Y=2.6676X10.596 (R2=0.0063) for Ado, Egbe and Ero dam respectively. The results on headlength, total length, body weight and standard length and pre-pelvic distance are significantly different at 95% among the T.zillii of the three dams. There was no significant difference in the meristic traits of the T. zillii of the three dams. The population size of T.zillii in the three dams was just too small compared to other species of fish hence the need to assess the stock of fish in these dams critically for the encouragement of proper fishing activities in these dams.

Development of intermediate moisture marinated fish product and its storage characteristics

An attempt was made to prepare an intermediate moisture (around 44% moisture) marinated (pH around 4) fish product. Fillets from Sciaenid fish (each fish weighing 70-80 gm) were dipped in a solution containing 7% acetic acid, 20% common salt and 1% propionic acid for 2 hours. After soaking, the soaked fillets were partially dried to about 44% moisture. Three effective hurdles like low pH (by using 7% acetic add and 1% propionic acid), low water activity (by using 20% salt and partially drying the fillets) and preservative (1% propionic add), were used to prepare a shelf-stable product at room temperature. The dried product was sprayed with 0.0 5% BHA in 50% alcohol and further dried for 10 minutes to remove added water and alcohol, thereby another hurdle (preservative) against fat oxidation. The product was packed in 300 gauge polythene bags and stored in transparent screw cap plastic jars. Fortnightly samples were drawn and subjected to biochemical, bacteriological and organoleptic evaluation to study its storage characteristics. The product was in good acceptable form up to 4 months at ambient temperature. The product needed one hour soaking in water with two changes of water in between to make it free from excess salt and acid smell.

Studies on frozen storage characteristics of fillets from six species of fresh water fishes

Frozen storage characteristics of fillets from six major species of fresh water fishes namely, Labeo rohita, Catla catla, Cirrhina mrigala, Labeo calbasu, Mystus seenghala, and Wallago attu are reported. The biochemical, bacteriological and organoleptic changes in the frozen fillets during storage at -18°C have been followed systematically. Compared to the two species of fresh water cat fishes, the four species of carps studied, had a slightly better storage life. From the organoleptic point of view, fillets of Cirrhina mrigala had the best shelf life.

Ice storage characteristics of fresh and brined shark fillets

Ice storage characteristics of fresh and brined fillets from fresh shark (Carcharias melanopterus) were studied in and out of contact with ice for more than two weeks. Changes occurring in biochemical constituents, physical qualities and bacterial counts of the fillets are reported. Shelf life of brined fillets out of contact with ice was considerably longer than that of control samples tinder similar conditions. Icing of shark fillets is suggested as a method for the removal of urea on a commercial scale.

Study on regional differences in soil-water characteristics and their relevance to aquaculture productivity and fish disease

A total of 45 ponds used for fish polyculture were investigated in three zones of Bangladesh to identify the differences among the zones in respect to aqua-ecology, culture practices, fish productivity and health management. Four hundred and fifty fish from three zones were clinically examined by naked eye and histopathology. Out of total number of fish examined, 45 fish from Dhaka zones were examined for parasites and bacteria in addition to histopathology. Faded and haemorrhagic gill, skin, fin, scale loss and lesions were observed during fish examination. Aeromonas spp. Pseudomonas spp. and Streptococcus spp. were isolated respectively from 56%, 46% and 39% affected fish. Among the five water quality parameters analyzed, the highest average hardness and alkalinity respectively were recorded in Rajshahi (156 ppm and 142 ppm) followed by Dhaka (146 ppm and 132 ppm) and Chittagong (81 ppm and 90 ppm). The highest average pH was recorded in Mymensingh (7.52) followed by Rajshahi (7.13) and Chittagong (7.05). Water holding capacity of soil in Rajshahi zone was poor compared to other zones and farmers were found to be reluctant to fish farming.