Industrial scale microwave processing of tomato juice using a novel continuous microwave system

This study evaluated the effect of an industrial scale continuous flow microwave volumetric heating system in comparison to conventional commercial scale pasteurisation for the processing of tomato juice in terms of physicochemical properties, microbial characteristics and antioxidant capacity. The effect against oxidative stress in Caco-2 cells, after in vitro digestion was also investigated. Physicochemical and colour characteristics of juices were very similar between technologies and during storage. Both conventional and microwave pasteurisation inactivated microorganisms and kept them in low levels throughout storage. ABTS⁺ values, but not ORAC, were higher for the microwave pasteurised juice at day 0 however no significant differences between juices were observed during storage. Juice processed with the microwave system showed an increased cytoprotective effect against H₂O₂ induced oxidation in Caco-2 cells. Organoleptic analysis revealed that the two tomato juices were very similar. The continuous microwave volumetric heating system appears to be a viable alternative to conventional pasteurisation.

A high-value, low-cost bubble continuous positive airway pressure system for low-resource settings:technical assessment and initial case reports

Acute respiratory infections are the leading cause of global child mortality. In the developing world, nasal oxygen therapy is often the only treatment option for babies who are suffering from respiratory distress. Without the added pressure of bubble Continuous Positive Airway Pressure (bCPAP) which helps maintain alveoli open, babies struggle to breathe and can suffer serious complications, and frequently death. A stand-alone bCPAP device can cost $6,000, too expensive for most developing world hospitals. Here, we describe the design and technical evaluation of a new, rugged bCPAP system that can be made in small volume for a cost-of-goods of approximately $350. Moreover, because of its simple design--consumer-grade pumps, medical tubing, and regulators--it requires only the simple replacement of a <$1 diaphragm approximately every 2 years for maintenance. The low-cost bCPAP device delivers pressure and flow equivalent to those of a reference bCPAP system used in the developed world. We describe the initial clinical cases of a child with bronchiolitis and a neonate with respiratory distress who were treated successfully with the new bCPAP device.

Study of oxidation and non-enzymatic glycosylation posttranslational modifications using a proteomic approach

A glicosilação não-enzimática e o stress oxidativo representam dois processos importantes visto desempenharem um papel importante no que respeita às complicações de vários processos patofisiológicos. No presente, a associação entre a glicosilação não-enzimática e a oxidação de proteínas é reconhecida como sendo um dos principais responsáveis pela acumulação de proteínas não-funcionais que, por sua vez, promove uma contínua sensibilização para um aumento do stress oxidativo ao nível celular. Embora esteja disponível bastante informação no que respeita aos dois processos e suas consequências ao nível estrutural e funcional, permanecem questões por esclarecer acerca do que se desenvolve ao nível molecular. Com o objectivo de contribuir para uma melhor compreensão da relação entre a glicosilação não-enzimática e a oxidação, proteínas modelo (albumina, insulina e histonas H2B e H1) foram submetidas a sistemas in vitro de glicosilação não-enzimática e oxidação em condições controladas e durante um período de tempo específico. A identificação dos locais de glicosilação e oxidação foi realizada através de uma abordagem proteómica, na qual após digestão enzimática se procedeu à análise por cromatografia líquida acoplada a espectrometria de massa tandem (MALDI-TOF/TOF). Esta abordagem permitiu a obtenção de elevadas taxas de cobertura das sequências proteicas, permitindo a identificação dos locais preferenciais de glicosilação e oxidação nas diferentes proteínas estudadas. Como esperado, os resíduos de lisina foram os preferencialmente glicosilados. No que respeita à oxidação, além das modificações envolvendo hidroxilações e adições de oxigénio, foram identificadas deamidações, carbamilações e conversões oxidativas específicas de vários aminoácidos. No geral, os resíduos mais afectados pela oxidação foram os resíduos de cisteína, metionina, triptofano, tirosina, prolina, lisina e fenilalanina. Ao longo do período de tempo estudado, os resultados indicaram que a oxidação teve início em zonas expostas da proteína e/ou localizadas na vizinhança de resíduos de cisteína e metionina, ao invés de exibir um comportamente aleatório, ocorrendo de uma forma nãolinear por sua vez dependente da estabilidade conformacional da proteína. O estudo ao longo do tempo mostrou igualmente que, no caso das proteínas préglicosiladas, a oxidação das mesmas ocorreu de forma mais rápida e acentuada, sugerindo que as alterações estruturais induzidas pela glicosilação promovem um estado pro-oxidativo. No caso das proteínas pré-glicosiladas e oxidadas, foi identificado um maior número de modificações oxidativas assim como de resíduos modificados na vizinhança de resíduos glicosilados. Com esta abordagem é realizada uma importante contribuição na investigação das consequências do dano ‘glico-oxidativo’ em proteínas ao nível molecular através da combinação da espectrometria de massa e da bioinformática.

Characterization of bioactive compounds of dealcoholized wine: valuation of distillation process

O vinho tinto é uma importante fonte de compostos fenólicos com atividade antioxidante e que estão relacionados com a prevenção de doenças cardiovasculares e cancro. Estes compostos são um sub-produto do processo de destilação vínica utilizado para produzir aguardente necessária para a produção de Vinho do Porto. Esta tese tem como objetivo valorizar os compostos fenólicos resultantes das destilarias de vinho, através do estudo da sua composição, das interações com o material polimérico do vinho, da sua estabilidade durante o armazenamento e avaliação dos seus potenciais efeitos biológicos in vitro. Isto irá permitir definir aplicações para estes compostos como ingredientes alimentares com propriedades funcionais. Dois vinhos tintos (RW1 e RW2) foram utilizados como fonte de compostos fenólicos. A fim de estudar estes compostos, cada vinho foi evaporado à pressão atmosférica, permitindo obter o respetivo vinho desalcolizado (DW1 e DW2). Os polissacarídeos e compostos fenólicos presentes nos vinhos desalcolizados foram fracionados por extração em fase sólida utilizando cartuchos C18 sep-pak. A fração hidrofóbica, rica em compostos fenólicos, foi separada em frações ricas em ácidos fenólicos, em procianidinas e em antocianinas, as quais foram usadas para avaliar a sua contribuição para a atividade antioxidante total e caracterização fenólica detalhada dos DW. Foram obtidas quantidades comparáveis de compostos fenólicos totais (1.3 g/L para RW1 e DW1, e 3.1 para RW2 e DW2), de taninos (1.2 g/L para RW1 e DW1 e 1.6 para RW2 e DW2) e de antocianinas (0.24 g/L para RW1 e DW1 e 0.41 para RW2 e DW2) para os vinhos e para os respetivos vinhos desalcolizados. A determinação da atividade antioxidante de RW e DW pelos métodos do DPPH e ABTS também originou valores semelhantes, permitindo inferir que o processo de destilação realizado não promoveu uma perda relevante de compostos fenólicos. A atividade antioxidante total de vinho deveu-se essencialmente à fração rica em antocianinas. Os dois DW foram dialisados para se obter o material polimérico dos vinhos (WPM1 e WPM2). O WPM1 e WPM2 apresentavam 1.1 e 1.3 g/L de material sólido, respetivamente. O WPM (WPM1 e WPM2) era composto por polissacarídeos (31 e 36%), proteínas (10 e 12%) e também por compostos fenólicos (32 e 43%). A análise de açúcares mostrou que as manoproteínas e as arabinogalactanas eram os principais polissacarídeos presentes. A extração do WPM com metanol deu origem a um material insolúvel em metanol (PMi) e a uma fração solúvel em metanol, que continuava a conter hidratos de carbono e compostos fenólicos, mostrando uma forte interação entre estes compostos. Para determinar a energia de ativação (Ea) da libertação dos compostos fenólicos de fracções de material polimérico do vinho, foram realizadas diálises do DW, WPM e PMi, utilizando-se quatro concentrações diferentes, a cinco temperaturas (5-40 °C). O valor da Ea foi 25 para o WPM e 61 kJ/mol para o PMi, mostrando que os compostos fenólicos do vinho podem estar associados de forma diferente à matriz polimérica e que uma fração pode estar, ainda, fortemente associada a esta matriz. A fim de avaliar a possível existência de interações seletivas com os compostos fenólicos, o WPM foi fracionado, permitindo a obtenção de uma fração rica em manoproteínas (MP), através de uma cromatografia de afinidade com concanavalina A e 3 frações ricas em arabinogalactanas (AG0, AG1 e AG2) obtidas por cromatografia de troca aniónica. Foi avaliada a difusão de nove antocianinas monoméricas através de uma membrana de diálise, em presença do WPM, e das frações ricas em MP e em AG. A diálise dos compostos fenólicos livres do vinho foi realizada como ensaio em branco. Todas as frações poliméricas mostraram capacidade para reter as antocianinas, embora em diferente extensão. Foi observada uma capacidade de retenção maior para as antocianinas acilglucosiladas do que para as antocianinas glucosiladas. A fração rica em AG teve uma maior contribuição para a capacidade de retenção das antocianinas pelo material polimérico vinho do que a fração rica em MP, principalmente quando as antocianinas estavam acetiladas. Com o objetivo de estudar formas para preservar, a longo prazo, as propriedades antioxidantes dos compostos fenólicos, o extrato de compostos fenólicos (PCE), em pó, foi armazenado em diferentes condições de luz e atmosfera, à temperatura ambiente durante 1 ano. Observou-se que o PCE armazenado no escuro, dentro de um exsicador sob atmosfera de azoto, preservou 95% da atividade antioxidante inicial. Também foram avaliadas as melhores condições para preservar as antocianinas quando em solução, armazenadas a duas temperaturas (5 e 30 ºC) durante 3 meses. A adição de 0.5 g/L de uma fração rica em polissacarídeos a um vinho armazenado a 30 ºC promoveu a proteção das antocianinas, especialmente das antocianinas cumaroiladas. Os potenciais efeitos biológicos dos compostos fenólicos foram avaliados em diferentes sistemas celulares in vitro utilizando as seguintes frações: WPM, WPS (polissacarídeos do vinho), WPC (compostos fenólicos do vinho), PA-E (fração rica em ácidos fenólicos), PR-E (fração rica em procianidinas) e APP-E (fração rica em antocianinas e procianidinas poliméricas). Foi observada uma maior viabilidade celular quando as células do carcinoma do cólon HT-29 foram expostas a dois agentes oxidantes (radiação UV e H2O2) em presença das frações PR-E e APP-E. Além disso, os extratos WPS, WPC, PR-E e APP-E mostraram propriedades anti-inflamatórias, avaliadas pela inibição da produção de NO por células de macrófagos RAW264.7, sendo o extrato APP-E (0.19 mg/mL) o que exibiu a maior capacidade anti-inflamatória. A fim de elucidar as propriedades antioxidantes dos extratos do vinho em células humanas, os glóbulos vermelhos (RBC) foram selecionados como um modelo metabolicamente simples. Os extratos WPM, WPS, WPC, PR-E, e APP-E mostraram efeito anti-hemolítico para a hemólise dos RBC provocada pelo peróxido de hidrogénio (H2O2) e pelo di-hidrocloreto de 2,2'-azo-bis(2-diaminopropano) (AAPH). Os resultados obtidos permitem concluir que o processo de desalcoolização dos vinhos à pressão atmosférica, preservou as principais características antioxidantes dos compostos fenólicos. Estes compostos podem contribuir para a defesa das células contra agentes oxidantes, nomeadamente por terem um potencial de atividades anti-inflamatória e anti-hemolítica, promovendo a viabilidade celular. A interação dos compostos fenólicos do vinho com o material polimérico permite inferir uma dosagem contínua e gradual das antocianinas vinho tinto após a sua ingestão, contribuindo para um período mais longo da sua exposição e, como consequência, dos seus potenciais benefícios para a saúde.

The effect of clock jitter on the performance of continuous-time delta-sigma ADC for GNSS signals

Next generation Global Navigation Satellite System (GNSS) receivers will operate in multiple navigation bands. An efficient way to achieve this with lower power and cost is to employ BandPass Sampling (BPS); nevertheless, the sampling operation injects large amounts of jitter noise, which degrades the performance of the receiver. Continuous–Time (CT) Delta–Sigma (ΔΣ) modulators are capable of suppressing this noise but the impact of clock jitter at the output of the Digital– to–Analog Converter (DAC) in the feedback path of the modulator should be taken into account. This paper presents an analytical approach for describing clock jitter in GNSS receivers when a CT–ΔΣ modulator is utilized for Analog–to–Digital Conversion (ADC). The validity of the presented approach is verified through time–domain simulations using a behavioural model of the fourth–order CT–ΔΣ modulator with 1–bit NRZ DAC feedback pulse.

Forecasting overseas visitors into the United Kingdom using continuous time and autoregressive fractional integrated moving average models with discrete data

This paper applies Gaussian estimation methods to continuous time models for modelling overseas visitors into the UK. The use of continuous time modelling is widely used in economics and finance but not in tourism forecasting. Using monthly data for 1986–2010, various continuous time models are estimated and compared to autoregressive integrated moving average (ARIMA) and autoregressive fractionally integrated moving average (ARFIMA) models. Dynamic forecasts are obtained over different periods. The empirical results show that the ARIMA model performs very well, but that the constant elasticity of variance (CEV) continuous time model has the lowest root mean squared error (RMSE) over a short period.

Characterization of metabolites of sweroside in rat urine using ultra-high-performance liquid chromatography combined with electrospray ionization quadrupole time-of-flight tandem mass spectrometry and NMR spectroscopy

Sweroside, a major active iridoid in Swertia pseudochinensis Hara, is recognized as an effective agent in the treatment of liver injury. Based on previous reports, the relatively short half-life (64 min) and poor bioavailability (approximately 0.31%) in rats suggested that not only sweroside itself but also its metabolites could be responsible for the observed hepato-protective effect. However, few studies have been carried out on the metabolism of sweroside. Therefore, the present study aimed at identifying the metabolites of sweroside in rat urine after a single oral dose (100 mg/kg). With ultra-high-performance liquid chromatography coupled with electrospray ionization quadrupole time-of-flight tandem mass spectrometry (UHPLC/Q-TOF-MS), the metabolic profile revealed 11 metabolites in rat urine, including phase I, phase II and aglycone-related products. The chemical structures of metabolites were proposed based on accurate mass measurements of protonated or deprotonated molecules and their fragmentation patterns. Our findings showed that the aglycone of sweroside (M05) and its glucuronide conjugate (M06) were principal circulating metabolites in rats. While several other metabolic transformations, occurring via reduction, N-heterocyclization and N-acetylation after deglycosylation, were also observed. Two metabolites (M05 and M06) were isolated from the rat urine for structural elucidation and identifcation of reaction sites. Both M05 and M06 were characterized by 1H, 13C and two-dimensional nuclear magnetic resonance (NMR) spectroscopy. UHPLC/Q-TOF-MS analysis has provided an important analytical platform to gather metabolic profile of sweroside.

A thin-layer chromatography-bioautographic method for detecting dipeptidyl peptidase IV inhibitors in plants

A thin-layer chromatography (TLC)-bioautographic method was developed with the aim to detect dipeptidyl peptidase IV (DPP IV) inhibitors from plant extracts. The basic principle of the method is that the enzyme (DPP IV) hydrolyzes substrate (Gly-Pro-p-nitroaniline) into p-nitroaniline (pNA), which diazotizes with sodium nitrite, and then reacts with N-(1-naphthyl) ethylenediamine dihydrochloride in turn to form a rose-red azo dye which provides a rose-red background on the TLC plates. The DPP IV inhibitors showed white spots on the background as they blocked enzymolysis of the substrate to produce pNA. The method was validated with respect to selectivity, sensitivity, linearity, precision, recovery, and stability after optimizing key parameters including plate type, time and temperature of incubation, concentration of substrate, enzyme and derivatization reagents, and absorption wavelength. The results showed good lineary within amounts over 0.01–0.1 μg range for the positive control, diprotin A, with the coefficient of determination (r2) = 0.9668. The limits of detection (LOD) and quantification (LOQ) were 5 and 10 ng, respectively. The recoveries ranged from 98.9% to 107.5%. The averages of the intra- and inter-plate reproducibility were in the range of 4.1–9.7% and 7.6–14.7%, respectively. Among the nine methanolic extracts of medicinal herbs screened for DPP IV inhibitors by the newly developed method, Peganum nigellastrum Bunge was found to have one white active spot, which was then isolated and identified as harmine. By spectrophotometric method, harmine hydrochloride was found to have DPP-IV inhibitory activity of 32.4% at 10 mM comparing to that of 54.8% at 50 μM for diprotin A.

Structure-inhibition relationship of phenylethanoid glycosides on angiotensin-converting enzyme using ultra-performance liquid chromatography-tandem quadrupole mass spectrometry

Angiotensin-converting enzyme (ACE) plays a critical role in rennin-angiotensin system. Recently, natural products isolated from herbal medicines revealed inhibitory effects against ACE which suggested their potential activities in regulating blood pressure. In this study, ACE inhibition (ACEI) of 21 phenylethanoid glycosides and related phenolic compounds were investigated by measuring the production of HA a rapid, sensitive, accurate and specific ultra-performance liquid chromatography-tandem quadrupole mass spectrometry (UPLC-MS/MS) method. The test compounds showed different inhibitory potencies on ACE ranging from 5.29 to 95.01% at 50 mM, and the compounds with ACEI higher than 50% were selected for further IC50 determination. The IC50 values were from 0.53 ± 0.04 to 15.035 ± 0.036 mM. The structure-inhibition relationship were then explored and the result showed that cinnamoyl groups played an essential role in ACEI of phenylethanoid glycosides. Furthermore, the sub-structures of increasing ACEI for phenylethanoid glycosides is more hydroxyls and less steric hindrance to chelate the active site Zn2+ of ACE. In summary, our results suggested that phenylethanoid glycosides are a widely available source of anti-hypertensive natural products and the information provided from structure-inhibition relationship study could aid the design of structurally modified phenylethanoid glycosides as anti-hypertensive drugs.

An FPGA based decimation filter processor design for real-time continuous-time Σ−Δ modulator performance measurement and evaluation

This paper reports on a Field Programmable Gate Array (FPGA) implementation as well as prototyping for real-time testing of a low complexity high efficiency decimation filter processor which is deployed in conjunction with a custom built low-power jitter insensitive Continuous Time (CT) Sigma-Delta (Σ-Δ) Modulator to measure and assess its performance. The CT Σ-Δ modulator/decimation filter cascade can be used in integrated all-digital microphone interfaces for a variety of applications including mobile phone handsets, wireless handsets as well as other applications requiring all-digital microphones. The work reported here concentrates on the design and implementation as well as prototyping on a Xilinx Spartan 3 FPGA development system and real-time testing of the decimation processing part deploying All-Pass based structures to process the bit stream coming from CT Σ-Δ modulator hence measuring in real-time and fully assessing the modulator's performance.

Analysis of six fungicides and one acaricide in still and fortified wines using solid-phase microextraction-gas chromatography/tandem mass spectrometry

A multiresidue gas chromatographic method for the determination of six fungicides (captan, chlorthalonil, folpet, iprodione, procymidone and vinclozolin) and one acaricide (dicofol) in still and fortified wines was developed. Solid-phase microextraction (SPME) was chosen for the extraction of the compounds from the studied matrices and tandem mass spectrometry (MS/MS) detection was used. The extraction consists in a solvent free and automated procedure and the detection is highly sensitive and selective. Good linearity was obtained with correlation coefficients of regression (R2) > 0.99 for all the compounds. Satisfactory results of repeatability and intermediate precision were obtained for most of the analytes (RSD < 20%). Recoveries from spiked wine ranged from 80.1% to 112.0%. Limits of quantification (LOQs) were considerably below the proposedmaximumresidue limits (MRLs) for these compounds in grapes and below the suggested limits for wine (MRLs/10), with the exception of captan.

The development and optimization of a modified single-drop microextraction method for organochlorine pesticides determination by gas chromatography-tandem mass spectrometry

We have developed a new method for single-drop microextraction (SDME) for the preconcentration of organochlorine pesticides (OCP) from complex matrices. It is based on the use of a silicone ring at the tip of the syringe. A 5 μL drop of n-hexane is applied to an aqueous extract containing the OCP and found to be adequate to preconcentrate the OCPs prior to analysis by GC in combination with tandem mass spectrometry. Fourteen OCP were determined using this technique in combination with programmable temperature vaporization. It is shown to have many advantages over traditional split/splitless injection. The effects of kind of organic solvent, exposure time, agitation and organic drop volume were optimized. Relative recoveries range from 59 to 117 %, with repeatabilities of <15 % (coefficient of variation) were achieved. The limits of detection range from 0.002 to 0.150 μg kg−1. The method was applied to the preconcentration of OCPs in fresh strawberry, strawberry jam, and soil.

Determination of total petroleum hydrocarbons in soil from different locations using infrared spectrophotometry and gas chromatography

Total petroleum hydrocarbons (TPH) are important environmental contaminants which are toxic to human and environmental receptors. Several analytical methods have been used to quantify TPH levels in contaminated soils, specifically through infrared spectrometry (IR) and gas chromatography (GC). Despite being two of the most used techniques, some issues remain that have been inadequately studied: a) applicability of both techniques to soils contaminated with two distinct types of fuel (petrol and diesel), b) influence of the soil natural organic matter content on the results achieved by various analytical methods, and c) evaluation of the performance of both techniques in analyses of soils with different levels of contamination (presumably non-contaminated and potentially contaminated). The main objectives of this work were to answer these questions and to provide more complete information about the potentials and limitations of GC and IR techniques. The results led us to the following conclusions: a) IR analysis of soils contaminated with petrol is not suitable due to volatilisation losses, b) there is a significant influence of organic matter in IR analysis, and c) both techniques demonstrated the capacity to accurately quantify TPH in soils, irrespective of their contamination levels.

Mass spectrometry parameters optimization for the 46 multiclass pesticides determination in strawberries with gas chromatography ion-trap tandem mass spectrometry

Multiclass analysis method was optimized in order to analyze pesticides traces by gas chromatography with ion-trap and tandem mass spectrometry (GC-MS/MS). The influence of some analytical parameters on pesticide signal response was explored. Five ion trap mass spectrometry (IT-MS) operating parameters, including isolation time (IT), excitation voltage (EV), excitation time (ET),maximum excitation energy or “q” value (q), and isolationmass window (IMW) were numerically tested in order to maximize the instrument analytical signal response. For this, multiple linear regression was used in data analysis to evaluate the influence of the five parameters on the analytical response in the ion trap mass spectrometer and to predict its response. The assessment of the five parameters based on the regression equations substantially increased the sensitivity of IT-MS/MS in the MS/MS mode. The results obtained show that for most of the pesticides, these parameters have a strong influence on both signal response and detection limit.Using the optimized method, a multiclass pesticide analysis was performed for 46 pesticides in a strawberry matrix. Levels higher than the limit established for strawberries by the European Union were found in some samples.