1000 resultados para Características físicas e químicas de frutos
Resumo:
Provide data and information on watershed becomes important since the knowledge of their physical characteristics, land use, etcetera, allows for better planning and sustainable use of economically, socially and environmentally in this area. The investigation of the physical environment has been commonly given with the use of geoprocessing, which has proved a very efficient tool. Within this context, this research aims at analyzing the river basin Punaú (located in the cities of Touros, Rio do Fogo and Pureza, state of Rio Grande do Norte) in several aspects, using geoprocessing as a tool of work, to provide information about the entire watershed. Specifically, this study aimed to update pre-existing maps, such as geological, geomorphological and land use, generating map of environmental vulnerability, under the aspect of erosion susceptibility of the area, generating map of legal incompatibility, identifying areas that are already being employed in breach of environmental legislation; propose solutions to the occupation of the river basin Punaú, focused on environmental planning. The methodology was based on the use of geoprocessing tools for data analysis and to make maps of legal incompatibility and environmental vulnerability. For the first map was taken into account the environmental legislation regarding the protection of watersheds. For the vulnerability analysis, the generated map was the result of crossing the maps of geology, geomorphology, soils and land use, having been assigned weights to different attributes of thematic maps, generating a map of environmental vulnerability in relation to susceptibility to erosion. The analysis results indicate that agriculture is the most significant activity in the basin, in total occupied area, which confers a high degree of environmental vulnerability in most of the basin, and some agricultural areas eventually develop in a manner inconsistent with Brazilian environmental legislation. It is proposed to consider deploying a measure of revitalization of the watershed in more critical areas and conservation through mitigation measures on the causes of environmental degradation, such as protection of water sources, protection and restoration of riparian vegetation, protection of permanent preservation areas, containment of erosion processes in general, and others listed or not in specific laws, and even the establishment of a committee of basins in the area
Resumo:
The proposal of this research is to analyze the convergence between fashion and communication shown on the materiality of the print media, and how the language from the supporter influences on the production of sense by the target market. Made real in the research corpus comprised of six ffw>>mag! magazines from the year 2011. The applied conceptual mechanism tries to investigate the production of sense from the physical attributes before interpreting the message s content, to do so, the Materiality of Communication is used, which offers an investigative apparatus of the media in its material shape, and those as influences in the communicative acts and processes. Methodologically, we adopt the Peircean Semiotics Theory, for its study focus on the analysis of the possible processes of production of sense. Through Semiotics we achieve the interpretative levels that allow us to clarify the questionings that come from the research s objectives, identifying and tracing the cognitive and intelligibility schemes bound to the media speeches of materiality. The analysis coordinated to the concepts and theories employed in this study point to a confirmation that the materiality of the reviewed media communicates to the readers in the same intensity as its content, provides a preview of the content and notifies the intentions of the publication. In the commercial way, characterizing the target audience it craves, and also in the conceptual way, demonstrating the ideas it wants to communicate. Where the convergence between communication and fashion unfolds as the materiality of the media by the choice of the materials and finishing options, and mainly by the selection and manipulation of technical images and colors from the cycles of fashion
Resumo:
Men and women express different preferences for ideal romantic partners. These preferences seem to vary with the level of involvement and commitment expected for the relationship and the perceptions people have about themselves. The current work was developed to expand the findings related to this subject, investigating the market perception of romantic relationships and the effect of context on self-assessment and preferences for romantic partners. For this purpose, 753 undergraduate, Brazilian and American, were enrolled between March 2010 and November 2012 and took part in at least one of the four studies that compose this research, performing the assessment of specific stimulus-subject descriptions. Studies one and two addressed Brazilian and American samples to respectively describe female and male expectations on human mating market. It was observed that individuals from both the genders expect positive assortative mating within couples, that each trait is not evaluated independently, and, in addition to biological predispositions, factors as environmental local constrains and cultural values may also affect mating expectations. The contrasts between the samples showed that Americans valued physical-attractiveness and social-status in describing the same-gender subjects and their expected partners, while Brazilians valued social-skills. Another expectation was also identified for both genders: physically attractive women and men of high-status were expected to be paired to each other. Study three addressed males and females expectations regarding which characteristics are most relevant in ensuring desirable partnerships for same-gender individuals. The results showed that men and women can be grouped together by having similar expectations. However, the group mainly composed of men considered status characteristics as the most important attributes, while the groups mostly composed of women indicated that social skills or physical characteristics as the most important in appealing to a desirable partner. Finally, study four investigated the effect of social comparison on self-perception and mate preferences, revealing that individuals were aware of the attributes valued by the opposite-gender and that self-perception was affected by the attributes of other people. In sum, this work evidenced that romantic relationships can be interpreted as a biological market and that the value of the attributes in the romantic mating marketplace are associated with reproductive relevance of the characteristics.
Resumo:
The intention of the present study was to analyze the adequacy of the playground of elementary schools, according to the point of view of the child student, direct user of this type of environment, what estimated its critical in respect to these spaces and aimed at to contribute for its improvement. Many studies have analyzed the quality of the physical environment available for activities of leisure in specific places for children, focusing in the influence of the physical space in the interpersonal relationships and the comfort and satisfaction generated by the physical characteristics of these spaces. Concern with scholar environment, specially the interest on playgrounds, has been subject of recent studies; however, little attention has been given to the opinion of the user-child in relation to this school environment. In this inquiry of the playground of two state schools of 1ª to 4ª series of elementary school in the city of Piracicaba, SP, was used: assystematics observations, photographic register of the studied environments, interviews with child-users and behavioral mapping. The main subjects resulting from the analysis of the interviews content were: adaptation, density and interpersonal relationships, and infantile confinement. The results revealed the unsatisfactory conditions of the courtyards, in respect to person-environment relationship. The children demonstrated to be critical, creative and responsible when answering questions related to the quality of the school courtyard. This finding confirms previous studies and leads to the conclusion that the child, as the direct user, should be included as an excellent source of consultation in the planning of the constructed environment
Resumo:
Perovskite-like ceramic materials present the general formula ABO3, where A is a rare earth element or an alkaline metal element, and B is a transition metal. These materials are strong candidates to assume the position of cathode in Solid Oxide Fuel Cells (SOFC), because they present thermal stability at elevated temperatures and interesting chemical and physical properties, such as superconductivity, dieletricity, magnetic resistivity, piezoelectricity, catalytic activity and electrocatalytic and optical properties. In this work the cathodes of Solid Oxide Fuel Cells with the perovskite structure of La1-xSrxMnO3 (x = 0.15, 0.22, 0.30) and the electrolyte composed of zirconia-stabilized-yttria were synthesized by the Pechini method. The obtained resins were thermal treatment at 300 ºC for 2h and the obtained precursors were characterized by thermal analysis by DTA and TG / DTG. The powder precursors were calcined at temperatures from 450 to 1350ºC and were analyzed using XRD, FTIR, laser granulometry, XRF, surface area measurement by BET and SEM methods. The pellets were sintered from the powder to the study of bulk density and thermal expansion
Resumo:
Hybrid systems formed from polymers and transition metals have now their physical and chemical properties extensively investigated for use in electronic devices. In this work, Titanium Dioxide (TiO2) from the precursor of titanium tetrabutoxide and the composite system Poly(Ethylene Glycol)-Titanium Dioxide (TiO2-PEG) were synthesized by sol-gel method. The PEG as acquired and TiO2 and composites powders were analyzed by X-Ray Diffraction (XRD), Spectroscopy in the Infrared region with Fourier transform (IRFT), Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM) and Electrochemical Impedance Spectroscopy (EIS). In the XRD analysis were observed in the TiO2 crystal faces of one of its polymorphs - anatase phase, crystal planes in Poly (Ethylene Glycol) with considerable intensity and in the composite systems the mixture of crystal faces of their precursors isolated and reduction of crystallinity. The TG / DTG suggested increasing the thermal instability of PEG in the composite powders as TiO2 is incorporated into the system. Spectral analysis presented in the infrared overlapping bands for the polymer and metal oxide, reducing the intensity of symmetric stretching of ligand groups in the main chain polymer and angular deformations; were observed using SEM micrographs of the morphological changes suffered by composite systems with the variation of the oxide concentration. Analyses by impedance spectroscopy indicated that the increased conductivity in composite occurs in line with the addition of the metal oxide concentration in the composite system
Resumo:
The separation oil-water by the use of flotation process is characterized by the involvement between the liquid and gas phases. For the comprehension of this process, it s necessary to analyze the physical and chemical properties command float flotation, defining the nature and forces over the particles. The interface chemistry has an important role on the flotation technology once, by dispersion of a gas phase into a liquid mixture the particles desired get stuck into air bubbles, being conduced to a superficial layer where can be physically separated. Through the study of interface interaction involved in the system used for this work, was possible to apply the results in an mathematical model able to determine the probability of flotation using a different view related to petroleum emulsions such as oil-water. The terms of probability of flotation correlate the collision and addition between particles of oil and air bubbles, that as more collisions, better is the probability of flotation. The additional probability was analyzed by the isotherm of absorption from Freundlich, represents itself the add probability between air bubbles and oil particles. The mathematical scheme for float flotation involved the injected air flow, the size of bubbles and quantity for second, the volume of float cell, viscosity of environment and concentration of demulsifier. The results shown that the float agent developed by castor oil, pos pH variation, salt quantity, temperature, concentration and water-oil quantity, presented efficient extraction of oil from water, up to 95%, using concentrations around 11 ppm of demulsifier. The best results were compared to other commercial products, codified by ―W‖ and ―Z‖, being observed an equivalent demulsifier power between Agflot and commercial product ―W‖ and superior to commercial product ―Z‖
Resumo:
The contamination by metal ions has been occurring for decades through the introduction of liquid effluent not treated, mainly from industrial activities, rivers and lakes, affecting water quality. For that the effluent can be disposed in water bodies, environmental standards require that they be adequately addressed, so that the concentration of metals does not exceed the limits of standard conditions of release in the receptor. Several methods for wastewater treatment have been reported in the literature, but many of them are high cost and low efficiency. The adsorption process has been used as effective for removal of metal ions. This paper presents studies to evaluate the potential of perlite as an adsorbent for removing metals in model solution. Perlite, in its natural form (NP) and expanded (EP), was characterized by X-ray fluorescence, X-ray diffraction, surface area analysis using nitrogen adsorption (BET method), scanning electron microscopy and Fourier transform infrared spectroscopy. The physical characteristic and chemical composition of the material presented were appropriate for the study of adsorption. Adsorption experiments by the method of finite bath for model solutions of metal ions Cr3+, Cu2+, Mn2+ and Ni2+ were carried out in order to study the effect of pH, mass of the adsorbent and the contact time on removal of ions in solution. The results showed that perlite has good adsorption capacity. The NP has higher adsorption capacity (mg g-1) than the EP. According to the values of the constant of Langmuir qm (mg g-1), the maximum capacity of the monolayer was obtained and in terms of proportion of mass, we found the following order experimental adsorption: Cr3+ (2.194 mg g- 1) > Ni2+ (0.585 mg g-1) > Mn2+ (0.515 mg g-1) > Cu2+ (0.513 mg g-1) and Cr3+ (1.934 mg g-1)> Ni2+ (0.514 mg g-1) > Cu2+ (0.421 mg g-1) > Mn2+ (0.364 mg g-1) on the NP and EP, respectively. The experimental data were best fitted the Langmuir model compared to Freundlich for Cu2+, Mn2+ and Ni2+. However, for the Cr3+, both models fit the experimental data
Resumo:
The development of computers and algorithms capable of making increasingly accurate and rapid calculations as well as the theoretic foundation provided by quantum mechanics has turned computer simulation into a valuable research tool. The importance of such a tool is due to its success in describing the physical and chemical properties of materials. One way of modifying the electronic properties of a given material is by applying an electric field. These effects are interesting in nanocones because their stability and geometric structure make them promising candidates for electron emission devices. In our study we calculated the first principles based on the density functional theory as implemented in the SIESTA code. We investigated aluminum nitride (AlN), boron nitride (BN) and carbon (C), subjected to external parallel electric field, perpendicular to their main axis. We discuss stability in terms of formation energy, using the chemical potential approach. We also analyze the electronic properties of these nanocones and show that in some cases the perpendicular electric field provokes a greater gap reduction when compared to the parallel field
Resumo:
The research area is located on the county of Tibau do Sul, in the east coast of Rio Grande do Norte State, about 80km south of the capital Natal. The tourism represents the main income activity and Pipa beach is the most visited beach in the city, annually receives a large influx of domestic and foreign tourists. Some recent studies have reported the occurrence of coastal erosion in this littoral, being the main objective of the research, analyze the existing coastal erosion, through two methodologies, the geoenvironmental mapping and beach morphodynamics. The geoenvironmental mapping was done from oblique aerial photographs and field visits, which sought to carry out first the geomorphological mapping, with the purpose of analyzing features that suggest susceptible areas to erosion, as areas without protection of natural dunes, marine terraces, or sandstones (beach-rocks and ferruginous sandstones), areas with the presence of gullies and stretches where the sea-cliffs were in direct contact with the action of the sea, representing the beginning of the beach profile. In the morphodynamic study sought to carry out the survey of the physical and morphological characteristics, the analysis of sediment grain of the beaches and finally the analysis of the morphodynamic parameters to generate a table of risk to erosion by sector of the beach. The morphodynamic parameters were defined by the methodology proposed by Short (2006), in which considers different patterns of dynamism on beaches with characteristics favorable and unfavorable to erosive profiles. The maps indicated different levels of risk to the segments of the beaches analyzed, suggesting risk to erosion low and low to moderate only in areas north and northwest of the beaches of Madeiro and Curral, and levels of moderate and high risk sectors in the south and southeast of these beaches . The beach of Pipa showed moderate levels of risk and moderate to high at the ends and high risk to erosion in the central portion. The study of the coastal environment, its morphological evolution, and areas with problems of erosion, are of fundamental importance to assist coastal management policies, giving grants for planning activities undertaken in these regions
Resumo:
Objetivou-se avaliar a qualidade da carne por meio da determinação da composição centesimal e das características físicas da paleta e do lombo de 20 cordeiros mestiços Ideal, não-castrados (NC) e castrados (C), submetidos a fotoperíodos curto, de 12 horas (FC), e longo, de 18 horas (FL). Os animais foram divididos ao acaso em esquema fatorial 2 x 2 (condição sexual x fotoperíodo), em quatro tratamentos (NC em FC; C em FC; NC em FL; e C em FL), com cinco repetições, sendo terminados em confinamento individual até que atingissem 37 kg de PV. A qualidade da carne foi determinada em amostras da paleta e do músculo Longissimus lumborum (LL). Os mais baixos teores de umidade e os mais altos de EE, tanto na paleta como no lombo, foram determinados na carne dos animais castrados. O fotoperíodo longo influenciou significativamente os teores de EE e proteína total do músculo LL. A capacidade de retenção de água foi afetada pelo FL, no qual foram encontrados percentuais mais baixos. Não houve efeito do fotoperíodo nem da condição sexual sobre a capacidade de absorção de água e a perda de peso por cozimento do músculo LL. Os valores de força de cisalhamento (FoCi) na carne de cordeiros NC e dos submetidos ao FL foram superiores aos da carne dos animais castrados ou expostos ao FC.
Resumo:
O experimento objetivou avaliar as alterações físicas, produção de ovos e mortalidade de codornas poedeiras alimentadas por diferentes períodos com milho moído após muda forçada. Utilizou-se um delineamento inteiramente ao acaso, com três tratamentos (0, 4 e 7) dias de alimentação com milho moído e quatro repetições de 30 aves por parcela para análise do peso vivo e mortalidade e duas aves por parcela para análise das características físicas. Os resultados mostraram involução do aparelho reprodutivo até o quarto dia após muda forçada. Após sete dias, as aves alimentadas com ração de produção atingiram o peso que possuíam antes da muda forçada, e aos onze dias, as aves alimentadas com milho moído por sete dias não haviam ainda recuperado o peso de aparelho reprodutivo existente antes da muda forçada.
Resumo:
Os tubarões enfrentam muitos obstáculos para sobreviver nos primeiros anos de vida e muitas espécies ocupam áreas de berçário. Embora estimativas de sobrevivência, particularmente para jovens, sejam essenciais para acessar, monitorar e manejar efetivamente populações animais, existem poucos cálculos destas estimativas para populações de tubarões e poucas estimativas baseadas em métodos diretos para estes animais em suas áreas de berçário. Métodos de marcação e recaptura foram utilizados no presente estudo para estimar o tamanho populacional e a sobrevivência de jovens tubarões-limão (Negaprion brevirostris) em uma área de berçário na Reserva Biológica do Atol das Rocas, Brasil. Os indivíduos foram amostrados entre 1999 e 2003 e as estimativas de tamanho populacional variaram entre 12 a 100 indivíduos jovens e a taxa de sobrevivência entre 24 e 54%, com média de 44,6% durante o período de amostragem mais robusto. A população destes tubarões jovens diminuiu ao longo de nosso estudo, ainda que as taxas de sobrevivência tenham aumentado durante o mesmo período. Mesmo um nível moderado de pesca e a remoção de fêmeas maduras em áreas adjacentes podem afetar dramaticamente pequenas populações de tubarões num berçário pequeno e isolado como o Atol das Rocas. As taxas de sobrevivência e tamanho populacional relativamente mais baixos em Rocas podem ser resultado das diferenças nas características físicas deste berçário, comparadas a outros utilizados pela espécie no Atlântico norte-ocidental. Tais parâmetros comparativamente mais baixos no Atol das Rocas sugerem a fragilidade da população jovem de tubarões-limão neste berçário.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
El desarrollo acelerado del polo cerámico de Santa Gertrudes (provincia de São Paulo) en la década de 90, fue causado principalmente por la localización privilegiada de la materia prima asociada al desarrollo tecnológico, las grandes reservas, el acceso fácil por autopistas que facilitan la distribución de los productos y la proximidad de los grandes centros consumidores. Este desarrollo facilitó que este Polo tuviera un boom en el inicio de 2007 en la fase de madurez con una producción de 367 millones de metros cuadrados, transformándose así en el mayor polo cerámico de las Américas. de acuerdo con los estudios geológicos realizados en este trabajo, las rocas de la Formación Corumbataí, origen de la materia prima usada en el polo cerámico, fueron clasificadas en cinco litofacies: maciza, laminada, intercalada I, intercalada II y alterada. Estas litofacies, por sus características mineralógicas y químicas, fueron consideradas arcillas illíticas con porcentaje medio de fundentes. Tomando como referencia las Normas para baldosas cerámicas, las características cerámicas obtenidas en el laboratorio demostraron que la mayoría de la materia prima es compatible con el grupo BIIb (Absorción de agua entre 6 y 10%).