995 resultados para CU-ZN
Resumo:
A produtividade dos pomares de cupuaçu na Amazônia tem experimentado lento declínio, provavelmente devido à diminuição da fertilidade do solo, requerendo adubações. Na ausência de recomendações técnicas para quantificar a demanda por nutrientes por essa cultura, o uso do Sistema Integrado de Diagnose e Recomendação (DRIS) pode representar uma alternativa para suprir essa necessidade. O objetivo deste trabalho foi avaliar os diagnósticos produzidos por diferentes fórmulas e critérios de interpretação dos índices DRIS em pomares de cupuaçu. Amostras foliares de 153 pomares foram analisadas para os nutrientes N, P, K, Ca, Mg, Zn, Mn, Cu e Fe e diagnosticadas por três fórmulas DRIS: Beaufils, Jones e Wadt e colaboradores. Na interpretação dos índices DRIS, utilizaram-se: o método DRIS Matéria Seca (M-DRIS), que separa os nutrientes em limitantes ou não limitantes, e o método do Potencial de Resposta à Adubação, o qual separa os nutrientes no estado nutricional de insuficientes, equilibrados ou em excesso. Foram também adotados níveis críticos para os teores dos nutrientes foliares em cupuaçueiros, oriundos da literatura. Os diagnósticos produzidos pelos diferentes critérios de interpretação dos índices DRIS não foram consistentes entre si ou em comparação com o método do nível crítico. A exceção foi a fórmula de Wadt e colaboradores que mostrou maior consistência entre os diagnósticos, independentemente do critério utilizado para sua interpretação. Os valores sugeridos para avaliação do estado nutricional pelo método do nível crítico não foram satisfatórios.
Resumo:
A utilização de métodos de diagnose nutricional para definição de teores ótimos e níveis críticos de nutrientes em tecidos vegetais tem se demonstrado promissora, desde que se conheçam suas limitações. Este trabalho teve como objetivo determinar as faixas normais de nutrientes para a cultura da laranjeira-pera em uma população, utilizando os métodos Chance Matemática (ChM), Sistema Integrado de Diagnose e Recomendação (DRIS) e Diagnose da Composição Nutricional (CND), além do Nível Crítico, pelo método de distribuição normal reduzida. O trabalho foi realizado no município de Bebedouro-SP, na Estação Experimental de Citricultura de Bebedouro. Utilizaram-se como base de dados teores totais de nutrientes de 50 amostras foliares e a produtividade da laranjeira-pera, oriundas de um experimento cujo fator de avaliação foram doses de calcário aplicadas superficialmente. Para o N, maior valor de ChM foi obtido pela classe 2 (23,6 a 24,7 g kg-1), com valores semelhantes aos obtidos pelo DRIS (22,1 a 24,0 g kg-1) e CND (22,1 a 23,9 g kg-1). Os valores inferiores dessas faixas normais concordam com o do nível crítico alcançado (22,7 g kg-1), sendo este muito próximo do proposto pela literatura. Para os nutrientes P, K, Mg, Zn e B, as faixas normais e os níveis críticos não se assemelharam aos descritos na literatura. Em relação aos nutrientes Ca, Fe, Mn e Cu, seus valores de faixa normal e nível crítico aproximaram-se dos recomendados, possivelmente devido à maior variação em seus teores. A utilização dos métodos propostos, em uma população, foi mais adequada quando houve maior variação nos teores dos nutrientes, além de possibilitar menor amplitude aos valores de faixas normais, quando comparados aos da faixa de terras suficientes encontrados na literatura.
Resumo:
Castor bean is a nutrient-demanding species, but there is still little information on its micronutrient requirements. The objectives of this study were to evaluate the effects of levels of B (2.5, 12.5 and 25.0 µmol L-1), Cu (0.05, 0.25 and 0.50 µmol L-1), Mn (0.2, 1.0 and 2.0 µmol L-1) and Zn (0.2, 1.0 and 2.0 µmol L-1) in a nutrient solution on plant B, Cu, Mn and Zn concentrations and uptake, vegetative growth and fruit yield of castor bean "Iris", grown in greenhouse. The experiment was arranged in a completely randomized block design with three replicates. The first deficiency symptoms were observed for B, followed by Zn, Cu and Mn. The main changes in the cell ultrastructure due to lack of B were thickening of the cell walls and middle lamellae, distorted chloroplasts and tightly stacked thylakoids, besides the absence of starch grains. The Mn, Zn and Cu deficiencies led to disruption of chloroplasts, disintegration of thylakoids and absence of amyloplasts. The concentration and uptake of B, Cu, Mn, and Zn in castor bean plants increased with micronutrient supply in the solution. Fruit yield was drastically reduced by B and Mn deficiencies. On the other hand, the dry matter yield of the shoot and root of castor bean plants was not. In the treatment with full nutrient solution, the leaves accumulated 56 and 48 % of the total B and Mn taken up by the plants, respectively, and the seeds and roots 85 and 61 % of the total Cu and Zn taken up, respectively. This shows the high demand of castor bean Iris for B and Mn for fruit yield.
Resumo:
Leaf analysis is the chemical evaluation of the nutritional status where the nutrient concentrations found in the tissue reflect the nutritional status of the plants. Thus, a correct interpretation of the results of leaf analysis is fundamental for an effective use of this tool. The purpose of this study was to propose and compare the method of Fertilization Response Likelihood (FRL) for interpretation of leaf analysis with that of the Diagnosis and Recommendation Integrated System (DRIS). The database consisted of 157 analyses of the N, P, K, Ca, Mg, S, Cu, Fe, Mn, Zn, and B concentrations in coffee leaves, which were divided into two groups: low yield (< 30 bags ha-1) and high yield (> 30 bags ha-1). The DRIS indices were calculated using the method proposed by Jones (1981). The fertilization response likelihood was computed based on the approximation of normal distribution. It was found that the Fertilization Response Likelihood (FRL) allowed an evaluation of the nutritional status of coffee trees, coinciding with the DRIS-based diagnoses in 84.96 % of the crops.
Resumo:
The spatial variability of soil and plant properties exerts great influence on the yeld of agricultural crops. This study analyzed the spatial variability of the fertility of a Humic Rhodic Hapludox with Arabic coffee, using principal component analysis, cluster analysis and geostatistics in combination. The experiment was carried out in an area under Coffea arabica L., variety Catucai 20/15 - 479. The soil was sampled at a depth 0.20 m, at 50 points of a sampling grid. The following chemical properties were determined: P, K+, Ca2+, Mg2+, Na+, S, Al3+, pH, H + Al, SB, t, T, V, m, OM, Na saturation index (SSI), remaining phosphorus (P-rem), and micronutrients (Zn, Fe, Mn, Cu and B). The data were analyzed with descriptive statistics, followed by principal component and cluster analyses. Geostatistics were used to check and quantify the degree of spatial dependence of properties, represented by principal components. The principal component analysis allowed a dimensional reduction of the problem, providing interpretable components, with little information loss. Despite the characteristic information loss of principal component analysis, the combination of this technique with geostatistical analysis was efficient for the quantification and determination of the structure of spatial dependence of soil fertility. In general, the availability of soil mineral nutrients was low and the levels of acidity and exchangeable Al were high.
Resumo:
The species Salix x rubens is being grown on the Southern Plateau of Santa Catarina since the 1940s, but so far the soil fertility requirements of the crop have not been assessed. This study is the first to evaluate the production profile of willow plantations in this region, based on the modified method of Summer & Farina (1986), for the recommendation of fertility levels for willow. By this method, based on the law of Minimum and of Maximum for willow production for the conditions on the Southern Plateau of Santa Catarina, the following ranges could be recommended: pH: 5.0-6.5; P: 12-89 mg dm-3; Mg: 3.2-7.5 mg; Zn: 5.0-8.3 mg dm-3; Cu: 0.8-4.6 mg dm-3; and Mn; 20-164 mg dm-3. The Ca/Mg ratio should be between 1.2 and 2.9. For K and Ca only the lower (sufficiency level), but not the upper threshold (excess) was established, with respectively 114 mg dm-3 and 5.3 cmol c dm-3. It was also possible to determine the upper threshold for Al and the Al/Ca ratio, i.e., 1.7 cmol c dm-3 and 0.28, respectively. For maximum yields, the clay in the soil surface layer should be below 320 g dm-3.
Resumo:
We study the effect of a magnetic field on the martensitic transition of a Cu-Al-Mn shape-memory alloy. The martensitic transition has been studied through resistance measurements under applied magnetic fields ranging from 0 to 50 kOe. Negative magnetoresistance showing an almost linear dependence with the square of the magnetization has been observed. This magnetoresistive effect is associated with the existence of small ferromagnetic Mn-clusters. Its strength and thermal dependence is different in both phases. The martensitic transition temperature is slightly increased and its spread in temperature significantly reduced upon increasing the field. These results show the existence of magnetoelastic coupling, which favors the nucleation of those martensitic variants with the easy magnetization axis aligned with the field.
Resumo:
Fertilizantes e corretivos, ao serem aplicados nos solos, fornecem micronutrientes como impurezas residuais da sua fabricação, os quais podem ser importantes fontes para as culturas. Em decorrência disso, o objetivo deste trabalho foi quantificar os teores dos micronutrientes Zn, Cu, Fe, Mn e Ni em fertilizantes e corretivos comercializados no Nordeste brasileiro, visando avaliar o potencial desses insumos no fornecimento indireto de micronutrientes às culturas agrícolas. Os insumos analisados neste estudo (24 amostras de fertilizantes e 26 de corretivos) foram coletados nos Estados da Bahia e Pernambuco pelo Ministério da Agricultura, Pecuária e Abastecimento (MAPA) e digeridos pelo método 3051A (USEPA, 1998). As determinações dos micronutrientes foram feitas por espectrofotometria de absorção atômica. Amostras de fertilizante SRM 695 (National Institute of Standards and Technology - NIST) e spikes foram adicionadas para controle de qualidade das análises. Os fertilizantes fosfatados, em geral, apresentaram maiores teores de micronutrientes do que os demais produtos testados. Os fertilizantes e corretivos avaliados representam uma fonte de micronutrientes ao solo que não pode ser desprezada. No entanto, a real disponibilidade desses elementos aportados ao solo necessita ser avaliada em estudos com plantas, pois fatores como solubilidade dos insumos, absorção pelas culturas, reações com o solo e perdas por precipitação e lixiviação devem ser considerados.
Resumo:
No Brasil, com a expansão da silvicultura clonal, o plantio de materiais genéticos mais produtivos e exigentes nutricionalmente tem aumentado o aparecimento de sintomas de deficiência de micronutrientes, principalmente de B, e, mais recentemente, de Cu e de Zn, sobretudo em áreas de Cerrado. Este trabalho teve por objetivo avaliar três métodos de determinação da disponibilidade de Zn (Mehlich-1, Mehlich-3 e DTPA pH 7,3) para mudas de eucalipto cultivadas em casa de vegetação, em amostras de seis solos de Cerrado, bem como a influência de propriedades do solo na eficiência desses extratores. Os tratamentos foram arranjados no esquema fatorial 6 x 5, correspondendo a seis solos e cinco doses de Zn (0, 2,5, 5, 10 e 20 mg dm-3), com quatro repetições, em blocos ao acaso. Os níveis críticos de Zn em solos de Cerrado, para o crescimento de mudas de eucalipto, são iguais ou inferiores a 0,23 e 0,05 mg dm-3, pelos extratores Mehlich-1 e DTPA, respectivamente. Os teores de Zn no solo pelos três extratores, assim como os teores e conteúdo na planta, aumentam com a elevação das doses adicionadas de Zn e são altamente correlacionados entre si. A avaliação da disponibilidade de Zn para mudas de eucalipto pode ser feita com qualquer um dos três extratores; entretanto, o Mehlich-1 é o mais recomendado, pela facilidade operacional deste método em relação aos outros e por ele já ser usado na grande maioria dos laboratórios do país.
Resumo:
High rates of phosphate fertilizers are applied to potato (Solanum tuberosum L.), which may cause antagonistic interactions with other nutrients and limit crop yields when over-supplied. The purpose of this study was to evaluate the influence of phosphorus (P) levels in nutrient solution on P use efficiency, nutritional status and dry matter (DM) accumulation and partitioning of potato plants cv. Ágata. The experiment was carried out in a greenhouse, arranged in a completely randomized block design with four replications. Treatments consisted of seven P levels in nutrient solution (0, 2, 4, 8, 16, 31, and 48 mg L-1). Plants were harvested after 28 days of growth in nutrient solution, and separated in roots, stems and leaves for evaluations. The treatment effects were analyzed by regression analysis. Phosphorus levels of up to 8 mg L-1 increased the root and shoot DM accumulation, but drastically decreased the root/shoot ratio of potato cv. Ágata. Higher P availability increased P concentration, accumulation and absorption efficiency, but decreased P use efficiency. Higher P levels increased the N, P, Mg, Fe, and Mn concentrations in roots considerably and decreased K, S, Cu, and Zn concentrations. In shoot biomass, N, P, K, and Ca concentrations were significantly increased by P applied in solution, unlike Mg and Cu concentrations. Although higher P levels (> 8 mg L-1) in nutrient solution increased P concentration, accumulation and absorption efficiency, the DM accumulation and partitioning of potato cv. Ágata were not affected.
Resumo:
This article reports positron annihilation spectroscopy and calorimetric measurements of the aging behavior in a Cu¿Al¿Be shape memory alloy. An excess of single vacancies is retained in the alloy as a result of a quench. All vacancies in excess disappear after long aging time, and a migration energy EM = 1.0±0.1 eV for this process has been found to be larger than in other Cu-based shape memory alloys. The good correlation found for the concentration of vacancies and the shift in the martensitic transition temperature demonstrates that, in Cu¿Al¿Be, changes in the transition after a quench are deeply related to the excess of vacancies.
Resumo:
Para o arroz irrigado, poucos trabalhos utilizam métodos de diagnose foliar desenvolvidos para as condições locais de clima, solo ou cultivares. O objetivo deste trabalho foi avaliar os métodos da Diagnose da Composição Nutricional e da Chance Matemática na definição dos padrões nutricionais de lavouras arrozeiras do Estado do Rio Grande do Sul. Resultados de produtividade de grãos e teores foliares de N, P, K, Ca, Mg, S, B, Cu, Fe, Mn, Zn e Mo de 356 lavouras arrozeiras cultivadas sob sistema de irrigação por inundação foram utilizados para a determinação das faixas de suficiência calculadas pelo método da Chance Matemática. As faixas de suficiência foram comparadas com valores críticos propostos pela literatura e com o intervalo de confiança do teor médio dos nutrientes em lavouras consideradas nutricionalmente equilibradas, identificadas pelo método Diagnose da Composição Nutricional. Observou-se pouca concordância entre os valores das faixas de suficiência indicados pelos métodos da Chance Matemática e da Diagnose da Composição Nutricional e os respectivos valores indicados na literatura. A faixa de teores foliares adequados, consistentes com maior produtividade média das lavouras arrozeiras, foi indicada ser de 23 a 28 g kg-1 para N; 11 a 14 g kg-1 para K; 1,4 a 2,0 g kg-1 para S; 6 a 12 mg kg-1 para B; e 70 a 200 mg kg-1 para Fe. Para os teores foliares de P, Ca, Mg, B, Cu, Mn e Zn e Mo nenhuma das faixas adequadas testadas indicou capacidade para distinguir as lavouras arrozeiras quanto à produtividade média.
Resumo:
The response of sugarcane to application of micronutrients is still not very well known. In view of the need for this information, the aim of this study was to evaluate the application of the micronutrients Zn, Cu, Mn, Fe, B, and Mo to plant cane in three soils, with and without application of filter cake. This study consisted of three experiments performed in the State of São Paulo, Brazil, (in Igaraçu do Tiete, on an Oxisol; in Santa Maria da Serra, on an Entisol, both in the 2008/2009 growing season; and in Mirassol, on an Ultisol, in the 2009/2010 growing season) in a randomized block design with four replications with a 8 x 2 factorial combination of micronutrients (1 - no application/control, 2 - addition of Zn, 3 - addition of Cu, 4 - addition of Mn 5 - addition of Fe, 6 - addition of B, 7 - addition of Mo, 8 - Addition of Zn, Cu, Mn, Fe, B, and Mo) and filter cake (0 and 30 t ha-1 of filter cake) in the furrow at planting. The application of filter cake was more efficient than of Borax in raising leaf B concentration to sufficiency levels for sugarcane in the Entisol, and it increased mean stalk yield in the Oxisol. In areas without filter cake application, leaf concentrations were not affected by the application of Zn, Cu, Mn, Fe, B, and Mo in the furrow at planting; however, Zn and B induced an increase in stalk and sugar yield in micronutrient-poor sandy soil.
Resumo:
The interest in crambe (Crambe abyssinica ) cultivation in Brazil is on the rise, whereas information on the nutrient requirements for this crop is scarce. The objective of this work was to evaluate the effect of nitrogen-phosphorus-potassium (N-P2O5-K2O formula 8:28:16) fertilization (0, 150, and 300 kg ha-1) on crambe shoot biomass production, grain and oil yields, and nutrient extraction and exportation in the second growing season after soybean. The experiment with a Haplorthox (Dystroferric Red Latosol) was carried out for two years in Botucatu, São Paulo State, Brazil. A randomized complete block design with eight replications was used. Fertilization with NPK at sowing increased the shoot biomass production, grain yield, grain oil content, as well as nutrient extraction and exportation at harvest. In the fertilized treatments, the average amounts of nutrients extracted per hectare were 91 kg K, 71 kg N, 52 kg Ca, 9.4 kg P, 9.4 kg Mg, 7.9 kg S, 2,348 g Fe, 289 g Zn, 135 g Mn, and 18.2 g Cu; while the average values of nutrient exportation per hectare were 54 kg N, 20 kg K, 12.3 kg Ca, 10 kg P, 6.6 kg S, 3.2 kg Mg, 365 g Zn, 60 g Fe, 50 g Mn, and 7.3 g Cu, with NPK fertilizer application.
Resumo:
Acid Mine Drainage (AMD) is one of the main environmental impacts caused by mining. Thus, innovative mitigation strategies should be exploited, to neutralize acidity and prevent mobilization of trace elements in AMD. The use of industrial byproducts has been considered an economically and environmentally effective alternative to remediate acid mine drainage. Therefore, the objective of this study was to evaluate the use of steel slag to mitigate acid mine drainage in a sulfidic material from a uranium mine, as an alternative to the use of limestone. Thus, increasing doses of two neutralizing agents were applied to a sulfidic material from the uranium mine Osamu Utsumi in Caldas, Minas Gerais State. A steel slag from the company ArcelorMittal Tubarão and a commercial limestone were used as neutralizing agents. The experiment was conducted in leaching columns, arranged in a completely randomized, [(2 x 3) + 1] factorial design, consisting of two neutralizing agents, three doses and one control, in three replications, totaling 21 experimental units. Electrical conductivity (EC), pH and the concentrations of Al, As, Ca, Cd, Cu, Fe, Mn, Ni, S, Se, and Zn were evaluated in the leached solutions. The trace element concentration was evaluated by ICP-OES. Furthermore, the CO2 emission was measured at the top of the leaching columns by capturing in NaOH solution and titration with HCl, in the presence of BaCl2. An increase in the pH of the leachate was observed for both neutralizing agents, with slightly higher values for steel slag. The EC was lower at the higher lime dose at an early stage of the experiment, and CO2 emission was greater with the use of limestone compared to steel slag. A decrease in trace element mobilization in the presence of both neutralizing agents was also observed. Therefore, the results showed that the use of steel slag is a suitable alternative to mitigate AMD, with the advantage of reducing CO2 emissions to the atmosphere compared to limestone.