Mechanical effects of the self-organization of dislocations and related critical characteristics

The effects of the dislocation pattern formed due to the self-organization of the dislocations in crystals on the macroscopic hardening and dynamic internal friction (DIF) during deformation are studied. The classic dislocation models for the hardening and DIF corresponding to the homogeneous dislocation configuration are extended to the case for the non-homogeneous one. In addition, using the result of dislocation patterning deduced from the non-linear dlislocation dynamics model for single slip, the correlation between the dislocation pattern and hardening as well as DIF is obtained. It is shown that in the case of the tension with a constant strain rate, the bifurcation point of dislocation patterning corresponds to the turning point in the stress versus strain and DIF versus strain curves. This result along with the critical characteristics of the macroscopic behavior near the bifurcation point is microscopically and macroscopically in agreement with the experimental findings on mono-crystalline pure aluminum at temperatures around 0.5T(m). The present study suggests that measuring the DIF would be a sensitive and useful mechanical means in order to study the critical phenomenon of materials during deformation.

Preparation and Tribological Studies of Stearic Acid Self-Assembled Monolayers on Polymer-Coated Silicon Surface

We present a good alternative method to improve the tribological properties of polymer films by chemisorbing a long-chain monolayer on the functional polymer surface. Thus, a novel self-assembled monolayer is successfully prepared on a silicon substrate coated with amino-group-containing polyethyleneimine (PEI) by the chemical adsorption of stearic acid (STA) molecules. The formation and structure of the STA-PEI film are characterized by means of contact-angle measurement and ellipsometric thickness measurement, and of Fourier transformation infrared spectrometric and atomic force microscopic analyses. The micro- and macro-tribological properties of the STA-PEI film are investigated on an atomic force microscope (AFM) and a unidirectional tribometer, respectively. It has been found that the STA monolayer about 2.1-nm thick is produced on the PEI coating by the chemical reaction between the amino groups in the PEI and the carboxyl group in the STA molecules to form a covalent amide bond in the presence of N,N'-dicyclohexylcarbodiimide (DCCD) as a dehydrating regent. By introducing the STA monolayer, the hydrophilic PEI polymer surface becomes hydrophobic with a water contact angle to be about 105degrees. Study of the time dependence of the film formation shows that the adsorption of PEI is fast, whereas at least 24 h is needed to generate the saturated STA monolayer. Whereas the PEI coating has relatively high adhesion, friction, and poor anti-wear ability, the STA-PEI film possesses good adhesive resistance and high load-carrying capacity and anti-wear ability, which could be attributed to the chemical structure of the STA-PEI thin film. It is assumed that the hydrogen bonds between the molecules of the STA-PEI film act to stabilize the film and can be restored after breaking during sliding. Thus, the self-assembled STA-PEI thin film might find promising application in the lubrication of micro-electromechanical systems (MEMS).

Scaling relationships in indentation of power-law creep solids using self-similar indenters

We use dimensional analysis to derive scaling relationships for self-similar indenters indenting solids that exhibit power-law creep. We identify the parameter that represents the indentation strain rate. The scaling relationships are applied to several types of indentation creep experiment with constant displacement rate, constant loading rate or constant ratio of loading rate over load. The predictions compare favourably with experimental observations reported in the literature. Finally, a connection is found between creep and 'indentation-size effect' (i.e. changing hardness with indentation depth or load).

Frequency characteristics and dynamical behaviors of self-modulation in vertical-cavity surface-emitting lasers

The frequency characteristics of a VCSEL with a quarter-wave plate (QWP) and an external reflector are investigated with the translation matrix of the vectorial field. Two series of eigenmode with a shift of half the free spectrum range are linearly polarized, respectively, along the neutral axes of QWP. We also numerically explore the polarization self-modulation phenomenon by using a vectorial laser equation and considering the inhomogeneous broadening of the gain medium. If the external cavity is so short that the shift is bigger than the homogeneous broadening, two stable longitudinal modes oscillate, respectively, on the neutral axes of QWP because they consume different carriers. With a long external cavity, the competition of the modes for the common carriers causes the intensity fluctuation of the modes with a period of one round-trip time of the external cavity.

A generalized self-consistent method accounting for fiber section shape

A three-phase confocal elliptical cylinder model is proposed for fiber-reinforced composites, in terms of which a generalized self-consistent method is developed for fiber-reinforced composites accounting for variations in fiber section shapes and randomness in fiber section orientation. The reasonableness of the fiber distribution function in the present model is shown. The dilute, self-consistent, differential and Mori-Tanaka methods are also extended to consider randomness in fiber section orientation in a statistical sense. A full comparison is made between various micromechanics methods and with the Hashin and Shtrikman's bounds. The present method provides convergent and reasonable results for a full range of variations in fiber section shapes (from circular fibers to ribbons), for a complete spectrum of the fiber volume fraction (from 0 to 1, and the latter limit shows the correct asymptotic behavior in the fully packed case) and for extreme types of the inclusion phases (from voids to rigid inclusions). A very different dependence of the five effective moduli on fiber section shapes is theoretically predicted, and it provides a reasonable explanation on the poor correlation between previous theory and experiment in the case of longitudinal shear modulus.

Extended self-similar scaling law of multi-scale eddy structure in wall turbulence

The longitudinal fluctuating velocity of a turbulent boundary layer was measured in a water channel at a moderate Reynolds number. The extended self-similar scaling law of structure function proposed by Benzi was verified. The longitudinal fluctuating velocity, in the turbulent boundary layer was decomposed into many multi-scale eddy structures by wavelet transform. The extended self-similar scaling law of structure function for each scale eddy velocity was investigated. The conclusions are I) The statistical properties of turbulence could be self-similar not only at high Reynolds number, but also at moderate and low Reynolds number, and they could be characterized by the same set of scaling exponents xi (1)(n) = n/3 and xi (2)(n) = n/3 of the fully developed regime. 2) The range of scales where the extended self-similarity valid is much larger than the inertial range and extends far deep into the dissipation range,vith the same set of scaling exponents. 3) The extended selfsimilarity is applicable not only for homogeneous turbulence, but also for shear turbulence such as turbulent boundary layers.

Efecto de policultivos repollo-arroz, repollo-zanahoria, repollo-frijol, repollo-cebolla sobre la entomofauna en el cultivo del repollo (Brassica oleraceae L.) híbrido Izalco

El experimento de campo se llevó a cabo en San Ignacio, municipio de la Concepción, departamento de Masaya con el objetivo de evaluar el efecto de policultivos (repollo-arroz, repollo-zanahoria, repollo-frijol y repollo-cebolla) sobre la palomilla de la col (Plutella xylostella L.) en el cultivo de repollo (Brassica oleracea L.) híbrido Izalco, además se evaluó un tratamiento en monocultivo de repollo y otro con aplicación de insecticida biológico dipel (Bacillus thuringiensis) para ser usados como testigo absoluto y relativo respectivamente. Las plagas predominantes durante el ensayo fueron Plutella Xylostella, Spodoptera sp., Ascia monuste y Afidos. En la etapa de crecimiento vegetativo (0-32 días después del trasplante, DDT),las población de Plutella xylostella fue baja, pero en la etapa de preformación de cabeza (32-64 DDT) la población se incrementó, los tratamientos que presentaron menores poblaciones fueron repollo-arroz, repollo + dipel seguido de repollo-cebolla. En la etapa de formación de cabeza (64-88 DDT) la incidencia de la plaga fue siempre alta en el monocultivo de repollo y repollo-frijol a excepción de los demás tratamientos, siendo esta la etapa de mayor importancia del cultivo. El uso de cultivos en asocio no ejerció ningún efecto sobre Ascia monuste, Spodoptera sp. y Afidos. En la incidencia de insectos benéficos sólo se encontró & ralas y sus poblaciones se mantuvieron a niveles bajos.

Evaluación del rendimiento agronómico de doce cultivares de repollo (Brassica oleracea L) y la incidencia de Plutella xylostella L, en la Estación experimental Raul González, valle de Sébaco, Matagalpa

El estudio se realizó en la Estación experimental Raúl González del valle de Sébaco de Junio a Septiembre de 1994. Con el objetivo de determinar las características agronómicas de cada cultivar de repollo (Brasica olearacea L), para resolver algunos problemas de pequeños y medianos productores que demandan cultivares con buen rendimiento y resistente a plagas y enfermedades. Se evaluaron las variedades: Gluckstadter Mittelfrüher, Yeshen, Migthy YR, Copenhagen Market, Conquest, Izalco, Fortuna, Grenadier, Discovery, Giant, Superette YR y Glory of Enkhuizen. El diseño utilizado fue de Bloques Completos al Azar (B.C.A) con cuatro repeticiones, evaluándose las variables de crecimiento y desarrollo del cultivo, así como lo relacionado al rendimiento agronómico y la incidencia de Plutella xylostella L. Los datos obtenidos se sometieron al análisis de varianza y a la prueba de Tukey. Las variedades de mejor crecimiento y desarrollo fueron: Yeshen, Migthy YR, Superette YR, Fortuna e Izalco. En las variables de calidad no se obtuvo diferencia significativa., sin embargo, los cultivares Superette YR, Izalco y Fortuna resultaron con el mayor índice de compactación. Respecto al rendimiento los cultivares Grenadier, Izalco y Fortuna obtuvieron el mayor porcentaje de formación de cabezas así como, el mayor peso de cabeza por hectárea. Los insecticidas utilizados para el manejo de P xylostella no lograron reducir sus poblaciones durante las etapas de preformación y llenado de cabezas. Al finalizar el ciclo del cultivo se presentó Xanthomonas campestris p. y campestris resultando tolerantes los cultivares Grenadier, Discovery, Izalco, Migthy YR y Fortuna; perdiendo casi la totalidad de su población las variedades: Glory of Enkhuizen, Copenhagen Market y Conquest.

Evaluación del rendimiento agronómico de seis cultivares de repollo (Brassica oleracea L.) en la Estación Experimental "San José de las Latas", Jinotega

En el presente trabajo se evaluó el rendimiento agronómico de seis cultivares Brassica oleracea L. var. caPitata; Summer Autumn, Mighty YR, Perfect Ball, Mighty, Yessen #-631-4, Yessen # 33-18. El ensayo se estableció en la estacion las " Latas " Ubicada en Jinotega a 1, 400 m.s.n.m. con una precipitación media anual de 2.291 mm, y una temperatura promedio 21.86 ºC. La siembra se realizó en época de primera del año 1990. Empleándose un diseño Bloques al Azar (BCA) Con De los resultados obtenidos, se encontró cultivares que presentaron mayor crecimiento y desarrollo estuvo en primer lugar el cultivar Summer Auttumn, en segundo la linea Yessen # 631-4, y en tercer lugar la linea Yessen # 33-18. Respecto a la calidad del producto comercial, sus variables se mantuvieron estadísticamente sin diferencias significativas a pesar de diferir en cultivares que no presentaron buen desarrollo. El cultivar Summer, menor consistencia, seguida de la línea Yessen # 33-18. Al evaluar el rendimiento, se encontró que el cultivar Summer Autumn y la linea Yessen # 631-4 obtuvieron los mejores promedios. Seguidos por el cultivar Mighty YR y la línea de Yessen # 33-18, aunque Mighty YR presento baja tolerancia a la bacteriosis (Xanthomonas campestris P.).