The corrosion inhibition mechanism of new rare earth cinnamate compounds — electrochemical studies

A combination of linear polarisation resistance (LPR) and cyclic potentiodynamic polarisation (CPP) measurements demonstrated that the lanthanum-4 hydroxy cinnamate compound could inhibit both the cathodic and anodic corrosion reactions on mild steel surfaces exposed to 0.01 M NaCl solutions. However, the dominating response was shown to vary with inhibitor concentration. At the concentrations for which the highest level of protection was achieved, both REM-4 hydroxy cinnamate (REM being lanthanum and mischmetal) displayed a strong anodic behaviour for mild steel and their inhibition performance, including their resistance against localised attack, improved with time.

Electrochemical impedance spectroscopy (EIS) measurements and modelling were carried out so as to propose a simple electrical model and correlate the extracted parameters to the inhibition mechanism put forward for REM-cinnamate based compounds. The results supported the high corrosion inhibition performance of the compounds as well as the build-up of a protective film with time. Based on a two-layer model the results suggested that the upper layer of the inhibitor film seemed to offer less resistance to the diffusion of electrochemically active species than the highly resistive inner layer at the film/metal interface.

Corrosion mitigation of mild steel by new rare earth cinnamate compounds

Corrosion rate measurements based on weight loss (i.e., mild steel immersed for seven days in 0.01 M NaCl) and linear polarization resistance (LPR) techniques have shown that even low concentrations (200 ppm) of cerium and lanthanum cinnamates are able to significantly inhibit corrosion. Of all the compounds investigated in this work Ce(4-methoxycinnamate)3· 2 H2O and La(4-methoxycinnamate)3· 2 H2O compounds exhibited the greatest inhibition and, in comparison with the component inhibitors, a synergy was clearly observed. The mechanism of corrosion inhibition was investigated using cyclic potentiodynamic polarization (CPP) measurements. The results suggest that La(4-nitrocinnamate)3· 2 H2O and Ce(4-methoxycinnamate)3· 2 H2O behave as mixed inhibitors and improve the resistance of steel against localized attack.

Boroxine ring compounds as dissociation enhancers in gel polyelectrolytes

In order to combine the advantages of both traditional gel electrolytes and polyelectrolytes, a novel polyelectrolyte which incorporates a boroxine ring-containing anion-trapping agent has been explored. Poly(lithium 2-acrylamido-2-methyl-1-propanesulfonate) (PAMPSLi), ethylene carbonate (EC) and tri(methoxyethoxyethoxyethoxy)boroxine (TME₃Bx) were combined to prepare various gel systems. The thermal properties and conductivities of these gels have been investigated. A conductivity of 10^−3.6 S cm⁻¹ at 20 °C has been achieved in a gel polyelectrolyte system with a molar ratio of [EC]:[TME3Bx]:[Li⁺]=24:1.7:1. Temperature-dependent NMR measurements indicated that a significant interaction exists between the boroxine ring and the polyelectrolyte.

The determination of bioactive compounds using HPLC with chemiluminescence detection

This dissertation investigated the selectivity and sensitivity of high performance liquid chromatography with various chemiluminescence detection protocols for the determination of biologically important compounds in beverages, wines and biomedical matrices. The work showed conclusively that this technology could successfully identify wines from different geographic locations and also monitor their maturation.

DIOXOLANE NORBORNANE / NORBORNENE COMPOUNDS SUITABLE AS ANTIMICROBIAL AGENTS TO TREAT BACTERIAL INFECTIONS

The invention provides a compound including : A core having a first face and a second face; A binding portion attached to the first face of the core, wherein the binding portion is capable of binding to an anionic group present in a cell membrane of a microorganism; and A hydrophobic portion attached to the second face of the core, wherein the hydrophobic portion is capable of interacting with the cell membrane of the microorganism; and The core comprises a dioxolane norbornane / norbornene of formula (II): Or a salt or ion thereof, wherein R' is a moiety forming part of a hydrophobic portion; R2 is a first binding portion; and R3 is a seconding binding portion. The invention also provides compositions including at least one such compound. The invention also provides methods and uses for treatment or prophylaxis of infection of a mammal by a microorganism, and methods and uses for treating or preventing contamination of a substrate by a microorganism, using the compounds and compositions.

Structure effect on the oxygen permeation properties of barium bismuth iron oxide membranes

In this work, we investigated the oxygen permeation properties of barium bismuth iron oxide within the family of [Ba_2−3xBi_3x−1][Fe_2xBi_1−2x]O_2+3x/2 for x = 0.17–0.60. The structure changed progressively from cubic to tetragonal and then to hexagonal as function of x in accordance with the different relative amounts of bismuth on A-site and B-site of ABO_3−δ perovskite lattices. We found that the oxygen flux and electrical conductivity correlated strongly, and it was prevalent for the cubic structure (x = 0.33–0.40) which conferred the highest oxygen flux of 0.59 ml min⁻¹ cm⁻² at 950 °C for a disk membrane x = 0.33 with a thickness of 1.2 mm. By reducing the thickness of the disk membrane to 0.8 mm, the oxygen flux increased to 0.77 ml min⁻¹ cm⁻², suggesting both surface kinetics and ion diffusion controlled oxygen flux, though the former was more prominent at higher temperatures. For disk membranes x = 0.45–0.60, the perovskite structure changed to tetragonal and hexagonal, and the oxygen flux was insignificant below 900 °C, clearly indicating electron conduction properties only. However, for two compositions with relatively high bismuth content, e.g. x = 0.55 and 0.60, there was a sudden and significant rise of oxygen permeability above 900 °C, by more than one order of magnitude. These materials changed conduction behavior from metallic to semiconductor at around 900 °C. These results suggest the advent of mixed ionic electronic conducting properties caused by the structure transition as bismuth ions changed their valence states to compensate for the oxygen vacancies formed within the perovskite lattices.

Identification and characterization of Kava-derived compounds mediating TNF-alpha suppression

There is a substantial unmet need for new classes of drugs that block TNF-α-mediated inflammation, and particularly for small molecule agents that can be taken orally. We have screened a library of natural products against an assay measuring TNF-α secretion in lipopolysaccharide-stimulated THP-1 cells, seeking compounds capable of interfering with the TNF-α-inducing transcription factor lipopolysaccharide-induced TNF-α factor. Among the active compounds were several produced by the kava plant (Piper mysticum), extracts of which have previously been linked to a range of therapeutic effects. When tested in vivo, a representative of these compounds, kavain, was found to render mice immune to lethal doses of lipopolysaccharide. Kavain displays promising pharmaceutical properties, including good solubility and high cell permeability, but pharmacokinetic experiments in mice showed relatively rapid clearance. A small set of kavain analogs was synthesized, resulting in compounds of similar or greater potency in vitro compared with kavain. Interestingly, a ring-opened analog of kavain inhibited TNF-α secretion in the cell-based assay and suppressed lipopolysaccharide-induced TNF-α factor expression in the same cells, whereas the other compounds inhibited TNF-α secretion without affecting lipopolysaccharide-induced TNF-α factor levels, indicating a potential divergence in mechanism of action.

Coagulation and nano-filtration: a hybrid system for the removal of lower molecular weight organic compounds (LMWOC)

The removal of lower molecular weight organic compounds (LMWOC) from water is of increasing concern. While, nano-fi ltration (NF) is a good option, it removes only a fraction of the LMWOC. In this paper, NF experiments were conducted to remove oxalic acid and diuron in combination with coagulation using poly-aluminum chloride (PAC) as the coagulant. The results showed that this hybrid treatment system was effective in removing oxalic acid where almost a 100% removal effi ciency of oxalic acid was achieved. However, using PAC as coagulant to remove diuron from water was not effective. In order to improve the removal efficiency of diuron, 0.02 M NaCl was added to diuron and a 40% increase in the removal of diuron was achieved. Higher removal of diuron was achieved when the solution was treated with reverse osmosis (RO) when compared to the nano-filtration.

Effect of natural organic compounds on the removal of organic carbon in coagulation and flocculation processes

Natural organic matter (NOM) in water contains organic compounds that are both hydrophobic and hydrophilic with a wide range of molecular weights. It is composed of non-homogeneous organic compounds such as humic substances, amino acids, sugars, aliphatic and aromatic acids, and other chemical synthetic organic matters. NOM in water is a major concern not only because of its contribution to the formation of disinfection by-products (DBPs) and taste and odor, but also its influence on the demand for coagulants and disinfectants, the removal efficiency of water treatment processes, etc. This research aims at identifying the influence of NOM in coagulation and flocculation processes in order to optimize the coagulation and flocculation conditions. In this study, pretreated pond water was used as the source water. It was observed from the experimental results that: (1) The optimum pH for coagulation to remove NOM is around 7. (2) The optimum alum dose at this pH can vary from 125-1,225 mgl-1 when the TOC is increased from 4 to 25 mgl-1. (3) The presence of secondary compounds such as Ca2+, Mg2+ divalent cations had no significant effect on the removal of organic matter. (4) The presence of clay increased the organic removal by 15%. (5) The organic compound with higher molecular weight has higher removal affinity in coagulation process. (6) Floc size and settling velocity of floc and sludge production all increased with the increase in NOM concentration. From the results of Capillary Suction Time (CST) tests, the floc formed with lower TOC readily released the water to make the dewatering process easier. (7) The organic removal efficiency was significantly different for natural water containing non-homogeneous organic compounds compared to the synthetic water containing humic acid only (homogeneous organic matter). For example, the NOM removal efficiency was 80% for the synthetic water containing humic acid with TOC of 7 mgl-1 at pH 7; but the NOM removal for the pretreated pond water was 60%.

Organic compounds present in the natural Amazonian aerosol : characterization by gas chromatography–mass spectrometry

[1] As part of the Large-Scale Biosphere-Atmosphere Experiment in Amazonia (LBA)-Cooperative LBA Airborne Regional Experiment (CLAIRE) 2001 campaign in July 2001, separate day and nighttime aerosol samples were collected at a ground-based site in Amazonia, Brazil, in order to examine the composition and temporal variability of the natural “background” aerosol. We used a high-volume sampler to separate the aerosol into fine (aerodynamic diameter, AD < 2.5 μm) and coarse (AD > 2.5 μm) size fractions and quantified a range of organic compounds in methanolic extracts of the samples by a gas chromatographic-mass spectrometric technique. The carbon fraction of the compounds could account for an average of 7% of the organic carbon (OC) in both the fine and coarse aerosol fractions. We observed the highest concentrations of sugars, sugar alcohols, and fatty acids in the coarse aerosol samples, which suggests that these compounds are associated with primary biological aerosol particles (PBAP) observed in the forest atmosphere. Of these, trehalose, mannitol, arabitol, and the fatty acids were found to be more prevalent at night, coinciding with a nocturnal increase in PBAP in the 2–10 μm size range (predominantly yeasts and other small fungal spores). In contrast, glucose, fructose, and sucrose showed persistently higher daytime concentrations, coinciding with a daytime increase in large fungal spores, fern spores, pollen grains, and, to a lesser extent, plant fragments (generally >20 μm in diameter), probably driven by lowered relative humidity and enhanced wind speeds/convective activity during the day. For the fine aerosol samples a series of dicarboxylic and hydroxyacids were detected with persistently higher daytime concentrations, suggesting that photochemical production of a secondary organic aerosol from biogenic volatile organic compounds may have made a significant contribution to the fine aerosol. Anhydrosugars (levoglucosan, mannosan, galactosan), which are specific tracers for biomass burning, were detected only at low levels in the fine aerosol samples. On the basis of the levoglucosan-to-OC emission ratio measured for biomass burning aerosol, we estimate that an average of ∼16% of the OC in the fine aerosol was due to biomass burning during CLAIRE 2001, indicating that the major fraction was associated with biogenic particles.