Avaliação in vitro de superfícies de titânio irradiadas com laser de Er,Cr:YSGG

Introduction: As a new alternative in the complementary treatment lasers teem different systems were employed in the decontamination of dental surfaces implants however, some systems have caused significant changes in its surface. Purpose: Analyze by Scanning Electron Microscopy (SEM) the effects of laser irradiation of Er,Cr: YSGG on different surfaces of titanium. Material and method: Study of 20 titanium discs, and 10 Machined Surface (MS) and 10 surfaces treated with acid (AC). The 10 discs with the same treatment were divided into two groups with five units each, the irradiation was performed in powers of 1 W and 2 W. Result: Showed that the irradiation with 1 W of power resulted in no significant morphological changes in the MS-irradiated compared to non-irradiated surfaces. In MS surfaces, minor changes were observed in the increase of 1000× when compared to non-irradiated surface. With 2 W of power, there were no significant morphological changes in the MS, compared to non-irradiated areas. In AC some changes were observed in the increase of X 1000, showing areas of wear suggestive of treatment and some areas with melting point. Conclusion: Considering the results and the parameters used in this study it was concluded that the Er, Cr: YSGG irradiation can be used for the machined surfaces of implants, but in acid-treated surfaces irradiation parameters should be more controlled.

Índice de estresse hídrico na cultura de cana-de-açúcar, em superfícies irrigadas sobre diferentes exposições e declividades

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Superfícies projetadas: uma simbiose dos processos criativo e executivo

This study aims to recognize the Surface Design as specialty hybrid and clarify the relationship between surface and design through projetual creative act and technical. The study shows that there projetual hybridity in the design of the Surface Design and the same occurs in two distinct stages: the creative phase , where the inherent design specialties together for their training , and executive process in which the diversity of technical information and construction procedures to assist the integration of design with other productive areas . Identify the products presented its projected surface condition , based on concepts checked the state of the art Surface Design was an action that enabled the verification of functional, aesthetic and symbolic object concepts . To evaluate this condition are presented six case studies to verify the levels of cooperation and implementation of the specialties of Design in objects that are highlighted by presenting different surfaces. Among the products are: DKR chair, bench Pai João, bench R540, Híbridos table, Facetas table and bench Xique-xique.

Estimativas da radiação difusa horária incidente em superfícies inclinadas com base na transmissividade atmosférica

Evaluated statistical equations estimates (based on radiometric fractions) of the hourly diffuse radiation incident on inclined surfaces for the North to 12.85, 22.85 and 32.85°, the climate and geographical conditions of Botucatu, SP. The database was generated from April/1998 to December/2007, with measures in the three tilted surfaces in different periods, but concomitant to the horizontal plane. In the validation of the equations were used indicative statistics MBE (mean absolute error), RMSE (square root mean square error) and index adjustment (d) for three inclinations and conditions of sky coverage. The increased angle of inclination of the surface led to increased scattering of hourly values for the coefficient of atmospheric transmissivity of diffuse radiation for inclined and horizontal surfaces. Estimates of diffuse radiation on the basis of hourly tilted horizontal global radiation occur for quadratic polynomial models, which adjust K'Dβ maximum values of between 0.14 and 0.30 for winter and summer when KTH varies between 0.40 and 0.66, indicating that energy, the highest values of diffuse radiation occur in partly cloudy sky conditions and / or partially open. The increase in atmospheric transmissivity decreases the performance of annual and monthly equations at all inclinations.

Buracos sônicos em superfícies esféricas

Pós-graduação em Física - IFT

Aplicação da teoria da confiabilidade em estacas escavadas de grande diâmetro para obtenção das superfícies resistentes de projeto

In this work, the author looks forward to develop a new method capable of incorporate the concepts of the Reliability Theory and Ruin Probability in Deep Foundations, in order to do a better quantification of the uncertainties, which is intrinsic in all geotechnical projects, meanly because we don't know all the properties of the materials that we work with. Using the methodologies of Decourt Quaresma and David Cabral, resistance surfaces have been developed utilizing the data achieved from the Standard Penetration Tests performed in the field of study, in conjecture with the loads defined in the executive project of the piles. The construction of resistance surfaces shows to be a very useful tool for decision making, no matter in which phase it is current on, projecting or execution. The surfaces were developed by Kriging (using the software Surfer® 12), making it easier to visualize the geotechnical profile of the field of study. Comparing the results, the conclusion was that a high safety factor doesn't mean higher security. It is fundamental to consider the loads and resistance of the piles in the whole field, carefully choosing the project methodology responsible to define the diameter and length of the piles

Aplicação da teoria da confiabilidade em estacas escavadas de grande diâmetro para obtenção das superfícies resistentes de projeto

In this work, the author looks forward to develop a new method capable of incorporate the concepts of the Reliability Theory and Ruin Probability in Deep Foundations, in order to do a better quantification of the uncertainties, which is intrinsic in all geotechnical projects, meanly because we don't know all the properties of the materials that we work with. Using the methodologies of Decourt Quaresma and David Cabral, resistance surfaces have been developed utilizing the data achieved from the Standard Penetration Tests performed in the field of study, in conjecture with the loads defined in the executive project of the piles. The construction of resistance surfaces shows to be a very useful tool for decision making, no matter in which phase it is current on, projecting or execution. The surfaces were developed by Kriging (using the software Surfer® 12), making it easier to visualize the geotechnical profile of the field of study. Comparing the results, the conclusion was that a high safety factor doesn't mean higher security. It is fundamental to consider the loads and resistance of the piles in the whole field, carefully choosing the project methodology responsible to define the diameter and length of the piles

Slice: experiência de gestão de um processo de projeto paramétrico, com superfícies complexas

O artigo apresenta uma reflexão sobre a gestão do processo de projeto paramétrico, com superfícies complexas, baseado em duas experiências realizadas no Instituto de Arquitetura e Urbanismo, da USP de São Carlos, pelo grupo de pesquisa Nomads.usp. SLICE é o resultado parcial de um pavilhão temporário, com superfícies complexas, desenvolvido por meio de projeto paramétrico e técnicas de fabricação digital. Utilizou-se o procedimento de uma pesquisa-ação2 com alunos de graduação e recém-formados em arquitetura, arquitetos do Nomads.usp e a indústria. Os experimentos apontaram para reflexões sobre algumas mudanças na gestão destes processos, para facilitar a viabilidade técnico-construtiva e gerar conhecimento nas áreas de projeto paramétrico, fabricação digital e gestão. O artigo tem caráter exploratório e o desafio é entender e avaliar a gestão do projeto paramétrico em relação a restrição de material, custo de execução e tempo de produção.

Absortâncias e emitâncias efetivas de superfícies: um método para estimá-las, um modelo experimental e exemplos de suas importâncias

Imperfeições, saliências e reentrâncias existentes nas superfícies típicas das edificações constituem obstáculos que podem alterar significativamente o comportamento delas em relação aos fluxos por radiação. Além de ampliar a área efetiva de troca de calor, criam sombras e reflexões, que não ocorreriam em. Assim, os procedimentos de cálculo, ao invés de considerar as superfícies perfeitamente lisas e planas, deveriam aplicar correções nas propriedades radiativas das superfícies. Denominam-se efetivas as absortâncias e emitâncias que resultam dessas correções. O presente artigo apresenta um método simples desenvolvido para avaliar essas influências e exemplifica a importância das correções acima mencionadas, apresentando resultados de simulações elaboradas no programa EnergyPlus para uma edificação de geometria simples, submetida ao longo de 1 ano ao clima da cidade de Brasília. Adotando-se absortâncias e emitâncias efetivas, os resultados das simulações revelam diferenças de até 2,8 ºC nas temperaturas internas do ar em relação às obtidas desprezando-se as influências que as ondulações das telhas exercem sobre os fluxos radiantes. Considerando o uso de condicionadores de ar, essa diferença pode representar uma variação de cerca de 30% nas estimativas de consumo de energia.