991 resultados para Apparel industry
Resumo:
The ability of building information modeling (BIM) to positively impact projects in the AEC through greater collaboration and integration is widely acknowledged. This paper aims to examine the development of BIM and how it can contribute to the cold-formed steel (CFS) building industry. This is achieved through the adoption of a qualitative methodology encompassing a literature review, exploratory interviews with industry experts, culminating in the development of e-learning material for the sector. In doing so, the research team have collaborated with one of the United Kingdom’s largest cold-formed steel designer/fabricators. By demonstrating the capabilities of BIM software and providing technical and informative videos in its creation, this project has found two key outcomes. Firstly, to provide invaluable assistance in the transition from traditional processes to a fully collaborative 3D BIM as required by the UK Government under the “Government Construction Strategy” by 2016 in all public sector projects. Secondly, to demonstrate BIM’s potential not only within CFS companies, but also within the AEC sector as a whole. As the flexibility, adaptability and interoperability of BIM software is alluded to, the results indicate that the introduction and development of BIM and the underlying ethos suggests that it is a key tool in the development of the industry as a whole.
Resumo:
Knowledge on the life span of the riveting dies used in the automotive industry is sparse. It is often the case that only when faulty products are produced are workers aware that their tool needs to be changed. This is of course costly both in terms of time and money. Responding to this challenge, this paper proposes a methodology which integrates wear and stress analysis to quantify the life of a riveting die. Experiments are carried out to measure the applied load required to split a rivet. The obtained results (i.e. force curves) are used to validate the wear mechanisms of the die observed using scanning electron microscopy. Sliding, impact, and adhesive wears are observed on the riveting die after a certain number of riveting cycles. The stress distribution on the die during riveting is simulated using a finite element (FE) approach. In order to confirm the accuracy of the FE model, the experimental force results are compared with the ones produced from FE simulation. The maximum and minimum von Mises' stresses generated from the FE model are input into a Goodman diagram and an S-N curve to compute the life of the riveting die. It is found that the riveting die is predicted to run for 4 980 000 cycles before failure.
Resumo:
This investigation aims to characterise the damping properties of the nonwoven materials with potential applications in automotive and aerospace industry. Nonwovens are a popular choice for many applications due to their relatively low manufacturing cost and unique properties. It is known that nonwovens are efficient energy dispersers for certain applications such as acoustic damping and ballistic impact. It is anticipated that these energy absorption properties could eventually be used to provide damping for mechanical vibrations. However the behaviour of nonwovens under dynamic load and vibration has not been investigated before. Therefore we intend to highlight these aspects of the behaviour of the nonwovens through this research. In order to obtain an insight to the energy absorption properties of the nonwoven fabrics, a range of tests has been performed. Forced vibration of the cantilever beam is used to explore damping over a range of resonance modes and input amplitudes. The tests are conducted on aramid, glass fibre and polyester fabrics with a range of area densities and various coatings. The tests clarified the general dynamic behaviour of the fabrics tested and the possible response in more real application condition as well. The energy absorption in both thickness and plane of the fabric is tested. The effects of the area density on the results are identified. The main absorption mechanism is known to be the friction. The frictional properties are improved by using a smaller fibre denier and increasing fibre length, this is a result of increasing contact surface between fibres. It is expected the increased friction result in improving damping. The results indicate different mechanism of damping for fiber glass fabrics compared to the aramid fabrics. The frequency of maximum efficiency of damping is identified for the fabrics tested. These can be used to recommend potential applications.
Resumo:
The crisis that spread worldwide since 2007 started from the financial sector and ended to affect also real economy. This process has attracted the attention of many scholars seeking to study its causes and impacts. Notwithstanding many works on this topic, the impact of the crisis on specific industries is still rather unexplored. The present work seeks to address this issue by analyzing the confectionery industry, with particular emphasis for Italian market leaders, Ferrero S.p.A. and Perfetti Van Melle S.r.l.. The aim of the study is to assess if they have been successful in tackling the crisis, keeping a satisfactory level of profitability associated to a good financial health notwithstanding ongoing difficulties. Moreover, we seek to analyze the strategies the companies employed to survive the crisis. The concern of the paper is both quantitative and qualitative. Thus, we calculated a complete set of indicators using a specific methodology for financial statement analysis which has been conceived especially for studying Italian firms; these data have been integrated with other information retrieved from the annual reports of the companies (especially the notes to the accounts and the directors’ report). The analysis highlights that both the firms benefit from a good financial health, with Perfetti Van Melle presenting a large amount of liquidity. On the contrary, liquidity should be the main concern of Ferrero because of an excessive reliance on current liabilities. Both the firms have a good level of profitability, even if Perfetti Van Melle’s one is decreasing. The key-strategies for the success of these firms are ongoing investments in state-of-the-art plant and machinery, an increasing use of equity as the main source of funding, along with huge investments in research and advertising.
Resumo:
Background: A previous review showed that high stress increases the risk of occupational injury by three- to five-fold. However, most of the prior studies have relied on short follow-ups. In this prospective cohort study we examined the effect of stress on recorded hospitalised injuries in an 8-year follow-up.
Methods: A total of 16,385 employees of a Finnish forest company responded to the questionnaire. Perceived stress was measured with a validated single-item measure, and analysed in relation recorded hospitalised injuries from 1986 to 2008. We used Cox proportional hazard regression models to examine the prospective associations between work stress, injuries and confounding factors.
Results: Highly stressed participants were approximately 40% more likely to be hospitalised due to injury over the follow-up period than participants with low stress. This association remained significant after adjustment for age, gender, marital status, occupational status, educational level, and physical work environment.
Conclusions: High stress is associated with an increased risk of severe injury.
Resumo:
The concept of green concrete has been progressively introduced in concrete technology. At the same time, new generations of superplasticisers have become widely available and self-compacting concrete is being increasingly implemented. The aim of this research is to study the impact that different sustainable materials have on both fresh and hardened properties of Self-Compacting Fibre Reinforced Concrete (SCFRC) in order to implement their use in a precast concrete company. Different combinations of cement, mineral additions (active and inert), polypropylene fibres, superplasticisers, and aggregates have been considered. Fresh state performance has been assessed by means of: slump flow test, V-funnel, and J-ring. Concrete compressive strength values at different ages have been retained as representative of the material's performance in its hardened state. All these properties have been correlated with SCFRC proportioning parameters. The importance of interactions between mineral additions and between these and superplasticiser is emphasised, as well as the different consequences of using powders as cement replacement or as mineral additions.
Optimisation of Environment-friendly SCFRC mixes use in precast Concrete Industry (PDF Download Available). Available from: http://www.researchgate.net/publication/263304799_Optimisation_of_Environment-friendly_SCFRC_mixes_use_in_precast_Concrete_Industry [accessed Jun 5, 2015].
Resumo:
Due to the high degree of international and economic integration across the globe, the 2007 global financial crisis quickly spread, causing recessions and widespread credit restrictions in advanced nations. During recessions, economic fluctuations cause dramatic changes to the market structure of industries, in particular, that of the construction sector. These structural changes can be further influenced by government strategies and policies; which if used incorrectly, can serve to fuel and exacerbate downturns. In contrasting form, during an economic recession, government strategies and policies can also be used to aid in exiting such economic turbulence. From an extensive review of literature it became apparent that very little research offered a comprehensive and systematic overview of Irish and UK construction related government policies and strategies adopted during recessions; hence the emergence of this topic. As part of an ongoing research PhD, the purpose of this paper is to collate and group Irish and UK Government strategies and policies adopted for the construction sector during the recession period 2007-2013; resulting in the establishment of a construction industry development framework and a taxonomic framework. The results reveal serious problems with the national strategic plan for the Irish construction industry, given that there is no overseeing body or target dates for implementation of the proposed actions. Furthermore, both countries failed to prioritize the proposed key actions within their strategic plans. The findings of this paper can be applied in the context of the construction sector to address shortcomings in the respective sub-sectors, while also aiding policy makers and company executives in mapping out future strategic milestones.
Resumo:
Nanotechnology has emerged as a technological advancement that could develop and transform the entire agri-food sector, with the potential to increase agricultural productivity, food security and economic growth for industries. Though as still a relatively new concept there are concerns over its safety, regulation and acceptance by the industry and consumers. This review set out to address the implications of nanotechnology for the agri-food industry by examining the potential benefits, risks and opportunities. Existing scientific gaps in knowledge are believed to be a prohibitive factor in addition to uncertainties in the level of awareness and attitudes towards the use of nanotechnology by the industry.
Resumo:
G-protein coupled receptors (GPCRs) are the targets of over half of all prescribed drugs today. The UniProt database has records for about 800 proteins classified as GPCRs, but drugs have only been developed against 50 of these. Thus, there is huge potential in terms of the number of targets for new therapies to be designed. Several breakthroughs in GPCRs biased pharmacology, structural biology, modelling and scoring have resulted in a resurgence of interest in GPCRs as drug targets. Therefore, an international conference, sponsored by the Royal Society, with world-renowned researchers from industry and academia was recently held to discuss recent progress and highlight key areas of future research needed to accelerate GPCR drug discovery. Several key points emerged. Firstly, structures for all three major classes of GPCRs have now been solved and there is increasing coverage across the GPCR phylogenetic tree. This is likely to be substantially enhanced with data from x-ray free electron sources as they move beyond proof of concept. Secondly, the concept of biased signalling or functional selectivity is likely to be prevalent in many GPCRs, and this presents exciting new opportunities for selectivity and the control of side effects, especially when combined with increasing data regarding allosteric modulation. Thirdly, there will almost certainly be some GPCRs that will remain difficult targets because they exhibit complex ligand dependencies and have many metastable states rendering them difficult to resolve by crystallographic methods. Subtle effects within the packing of the transmembrane helices are likely to mask and contribute to this aspect, which may play a role in species dependent behaviour. This is particularly important because it has ramifications for how we interpret pre-clinical data. In summary, collaborative efforts between industry and academia have delivered significant progress in terms of structure and understanding of GPCRs and will be essential for resolving problems associated with the more difficult targets in the future.