Mixing apples with oranges? Partisanship and active labour market policies in Europe

There are competing theoretical expectations and conflicting empirical results concerning the impact of partisanship on spending on active labour market policies (ALMPs). This paper argues that one should distinguish between different ALMPs. Employment incentives and rehabilitation programmes incentivize the unemployed to accept jobs. Direct job creation reduces the supply of labour by creating non-commercial jobs. Training schemes raise the human capital of the unemployed. Using regression analysis this paper shows that the positions of political parties towards these three types of ALMPs are different. Party preferences also depend on the welfare regime in which parties are located. In Scandinavia, left-wing parties support neither employment incentives nor direct job creation schemes. In continental and Liberal welfare regimes, left-wing parties oppose employment incentives and rehabilitation programmes to a lesser extent and they support direct job creation. There is no impact of partisanship on training. These results reconcile the previously contradictory findings concerning the impact of the Left on ALMPs.

The politics of in-work benefits: The case of the ‘active income of solidarity’ in France

In-work benefits have been introduced in a number of Bismarckian welfare regimes in a context of austerity despite being targeted at politically weak constituents and representing a deviation from prevailing welfare institutions. This article addresses this puzzle by looking at the introduction in 2008 of an in-work benefit scheme in France, the Active Income of Solidarity. The analysis reveals that this reform was the result of a cross-cutting alliance between the conservative party and employers, as well as parts of the socialist party and the union movement. The alliance was possible thanks to actors’ multiple interpretations of the reform. The reform was difficult to oppose given its support by experts and public opinion and because it entailed an increase in revenues for low-income workers.

An optically transparent thin-layer electrochemical cell for the study of vibrational circular dichroism of chiral redox-active molecules

An optically transparent thin-layer electrochemical (OTTLE) cell with a locally extended optical path has been developed in order to perform vibrational circular dichroism (VCD) spectroscopy on chiral molecules prepared in specific oxidation states by means of electrochemical reduction or oxidation. The new design of the electrochemical cell successfully addresses the technical challenges involved in achieving sufficient infrared absorption. The VCD-OTTLE cell proves to be a valuable tool for the investigation of chiral redox-active molecules.

Tracking the momentum flux of a CME and quantifying its influence on geomagnetically induced currents at Earth

We investigate a coronal mass ejection (CME) propagating toward Earth on 29 March 2011. This event is specifically chosen for its predominately northward directed magnetic field, so that the influence from the momentum flux onto Earth can be isolated. We focus our study on understanding how a small Earth-directed segment propagates. Mass images are created from the white-light cameras onboard STEREO which are also converted into mass height-time maps (mass J-maps). The mass tracks on these J-maps correspond to the sheath region between the CME and its associated shock front as detected by in situ measurements at L1. A time series of mass measurements from the STEREO COR-2A instrument is made along the Earth propagation direction. Qualitatively, this mass time series shows a remarkable resemblance to the L1 in situ density series. The in situ measurements are used as inputs into a three-dimensional (3-D) magnetospheric space weather simulation from the Community Coordinated Modeling Center. These simulations display a sudden compression of the magnetosphere from the large momentum flux at the leading edge of the CME, and predictions are made for the time derivative of the magnetic field (dB/dt) on the ground. The predicted dB/dt values were then compared with the observations from specific equatorially located ground stations and showed notable similarity. This study of the momentum of a CME from the Sun down to its influence on magnetic ground stations on Earth is presented as a preliminary proof of concept, such that future attempts may try to use remote sensing to create density and velocity time series as inputs to magnetospheric simulations.

Analysis and modeling of active occupancy of the residential sector in Spain: an indicator of residential electricity consumption

The growing energy consumption in the residential sector represents about 30% of global demand. This calls for Demand Side Management solutions propelling change in behaviors of end consumers, with the aim to reduce overall consumption as well as shift it to periods in which demand is lower and where the cost of generating energy is lower. Demand Side Management solutions require detailed knowledge about the patterns of energy consumption. The profile of electricity demand in the residential sector is highly correlated with the time of active occupancy of the dwellings; therefore in this study the occupancy patterns in Spanish properties was determined using the 2009–2010 Time Use Survey (TUS), conducted by the National Statistical Institute of Spain. The survey identifies three peaks in active occupancy, which coincide with morning, noon and evening. This information has been used to input into a stochastic model which generates active occupancy profiles of dwellings, with the aim to simulate domestic electricity consumption. TUS data were also used to identify which appliance-related activities could be considered for Demand Side Management solutions during the three peaks of occupancy.

The dependent variable problem in quantitative studies of Active Labour Market Programmes: uncovering hidden dynamics?

The question of what explains variation in expenditures on Active Labour Market Programs (ALMPs) has attracted significant scholarship in recent years. Significant insights have been gained with respect to the role of employers, unions and dual labour markets, openness, and partisanship. However, there remain significant disagreements with respects to key explanatory variables such the role of unions or the impact of partisanship. Qualitative studies have shown that there are both good conceptual reasons as well as historical evidence that different ALMPs are driven by different dynamics. There is little reason to believe that vastly different programs such as training and employment subsidies are driven by similar structural, interest group or indeed partisan dynamics. The question is therefore whether different ALMPs have the same correlation with different key explanatory variables identified in the literature? Using regression analysis, this paper shows that the explanatory variables identified by the literature have different relation to distinct ALMPs. This refinement adds significant analytical value and shows that disagreements are at least partly due to a dependent variable problem of ‘over-aggregation’.

Essays on labour market dualisation in Western Europe: active labour market policies, temporary work regulation and inequality

European labour markets are increasingly divided between insiders in full-time permanent employment and outsiders in precarious work or unemployment. Using quantitative as well as qualitative methods, this thesis investigates the determinants and consequences of labour market policies that target these outsiders in three separate papers. The first paper looks at Active Labour Market Policies (ALMPs) that target the unemployed. It shows that left and right-wing parties choose different types of ALMPs depending on the policy and the welfare regime in which the party is located. These findings reconcile the conflicting theoretical expectations from the Power Resource approach and the insider-outsider theory. The second paper considers the regulation and protection of the temporary work sector. It solves the puzzle of temporary re-regulation in France, which contrasts with most other European countries that have deregulated temporary work. Permanent workers are adversely affected by the expansion of temporary work in France because of general skills and low wage coordination. The interests of temporary and permanent workers for re-regulation therefore overlap in France and left governments have an incentive to re-regulate the sector. The third paper then investigates what determines inequality between median and bottom income workers. It shows that non-inclusive economic coordination increases inequality in the absence of compensating institutions such as minimum wage regulation. The deregulation of temporary work as well as spending on employment incentives and rehabilitation also has adverse effects on inequality. Thus, policies that target outsiders have important economic effects on the rest of the workforce. Three broader contributions can be identified. First, welfare state policies may not always be in the interests of labour, so left parties may not always promote them. Second, the interests of insiders and outsiders are not necessarily at odds. Third, economic coordination may not be conducive to egalitarianism where it is not inclusive.

Following the creation of active gold nanocatalysts from phosphine-stabilized molecular clusters

The phosphine-stabilised gold cluster [Au6(Ph2P-o-tolyl)6](NO3)2 is converted into an active nanocatalyst for the oxidation of benzyl alcohol through low-temperature peroxide-assisted removal of the phosphines, avoiding the high-temperature calcination process. The process was monitored using in-situ X-ray absorption spectroscopy, which revealed that after a certain period of the reaction with tertiary butyl hydrogen peroxide, the phosphine ligands are removed to form nanoparticles of gold which matches with the induction period seen in the catalytic reaction. Density functional theory calculations show that the energies required to remove the ligands from the [Au6Ln]2+ increase significantly with successive removal steps, suggesting that the process does not occur at once but sequentially. The calculations also reveal that ligand removal is accompanied by dramatic re-arrangements in the topology of the cluster core.

Parameter spaces of environmental fields responsible for cyclone development from tropics to extratropics

Objective cyclone tracking applied to a 30-yr reanalysis dataset shows that cyclone development in the summer and autumn seasons is active in the tropics and extratropics and inactive in the subtropics. To understand this geographically bimodal distribution of cyclone development associated with tropical and extratropical cyclones quantitatively, the direct relationship between cyclone types and their environments are assessed by using a parameter space of environmental variables [environmental parameter space (EPS)]. The number of cyclones is analyzed in terms of two different factors: the environmental conditions favorable for cyclone development and the area size that satisfies the favorable condition. The EPS analysis is mainly conducted for two representative environmental parameters that are commonly used for cyclone analysis: potential intensity for tropical cyclones and baroclinicity for extratropical cyclones. The geographically bimodal distribution is attributed to the high sensitivity of the cyclone development to the change in the environmental fields from tropics to extratropics. In addition, the bimodal distribution is partly attributed to the rapid change in the environmental fields from tropics to extratropics. The EPS analysis also shows that other environmental parameters, including relative humidity and vertical velocity, may enhance the contrast between the tropics (extratropics) and subtropics, whereas they are not essential for determining cyclone types. The relationship between cyclones and their environments is found to be similar between the hemispheres in the EPS, although the geographical distribution, particularly the longitudinal uniformity, is markedly different between the hemispheres.

Automated identification and tracking of polar-cap plasma patches at solar minimum

A method of automatically identifying and tracking polar-cap plasma patches, utilising data inversion and feature-tracking methods, is presented. A well-established and widely used 4-D ionospheric imaging algorithm, the Multi-Instrument Data Assimilation System (MIDAS), inverts slant total electron content (TEC) data from ground-based Global Navigation Satellite System (GNSS) receivers to produce images of the free electron distribution in the polar-cap ionosphere. These are integrated to form vertical TEC maps. A flexible feature-tracking algorithm, TRACK, previously used extensively in meteorological storm-tracking studies is used to identify and track maxima in the resulting 2-D data fields. Various criteria are used to discriminate between genuine patches and "false-positive" maxima such as the continuously moving day-side maximum, which results from the Earth's rotation rather than plasma motion. Results for a 12-month period at solar minimum, when extensive validation data are available, are presented. The method identifies 71 separate structures consistent with patch motion during this time. The limitations of solar minimum and the consequent small number of patches make climatological inferences difficult, but the feasibility of the method for patches larger than approximately 500 km in scale is demonstrated and a larger study incorporating other parts of the solar cycle is warranted. Possible further optimisation of discrimination criteria, particularly regarding the definition of a patch in terms of its plasma concentration enhancement over the surrounding background, may improve results.

The role of soil microbes in the global carbon cycle: tracking the below-ground microbial processing of plant-derived carbon for manipulating carbon dynamics in agricultural systems.

It is well known that atmospheric concentrations of carbon dioxide (CO2) (and other greenhouse gases) have increased markedly as a result of human activity since the industrial revolution. It is perhaps less appreciated that natural and managed soils are an important source and sink for atmospheric CO2 and that, primarily as a result of the activities of soil microorganisms, there is a soil-derived respiratory flux of CO2 to the atmosphere that overshadows by tenfold the annual CO2 flux from fossil fuel emissions. Therefore small changes in the soil carbon cycle could have large impacts on atmospheric CO2 concentrations. Here we discuss the role of soil microbes in the global carbon cycle and review the main methods that have been used to identify the microorganisms responsible for the processing of plant photosynthetic carbon inputs to soil. We discuss whether application of these techniques can provide the information required to underpin the management of agro-ecosystems for carbon sequestration and increased agricultural sustainability. We conclude that, although crucial in enabling the identification of plant-derived carbon-utilising microbes, current technologies lack the high-throughput ability to quantitatively apportion carbon use by phylogentic groups and its use efficiency and destination within the microbial metabolome. It is this information that is required to inform rational manipulation of the plant–soil system to favour organisms or physiologies most important for promoting soil carbon storage in agricultural soil.

Visual sensor fusion for active security in robotic industrial environments

This work presents a method of information fusion involving data captured by both a standard CCD camera and a ToF camera to be used in the detection of the proximity between a manipulator robot and a human. Both cameras are assumed to be located above the work area of an industrial robot. The fusion of colour images and time of light information makes it possible to know the 3D localization of objects with respect to a world coordinate system. At the same time this allows to know their colour information. Considering that ToF information given by the range camera contains innacuracies including distance error, border error, and pixel saturation, some corrections over the ToF information are proposed and developed to improve the results. The proposed fusion method uses the calibration parameters of both cameras to reproject 3D ToF points, expressed in a common coordinate system for both cameras and a robot arm, in 2D colour images. In addition to this, using the 3D information, the motion detection in a robot industrial environment is achieved, and the fusion of information is applied to the foreground objects previously detected. This combination of information results in a matrix that links colour and 3D information, giving the possibility of characterising the object by its colour in addition to its 3D localization. Further development of these methods will make it possible to identify objects and their position in the real world, and to use this information to prevent possible collisions between the robot and such objects.

Note: Active optical detection of cloud from a balloon platform

A disposable backscatter instrument is described for optical detection of cloud in the atmosphere from a balloon-carried platform. It uses an ultra-bright light emitting diode (LED) illumination source with a photodiode detector. Scattering of the LED light by cloud droplets generates a small optical signal which is separated from background light fluctuations using a lock-in technique. The signal to noise obtained permits cloud detection using the scattered LED light, even in daytime. The response is interpreted in terms of the equivalent visual range within the cloud. The device is lightweight (150 g) and low power (∼30 mA), for use alongside a conventional meteorological radiosonde.