Simulation of Severe Slugging Formation and Control in Offshore Riser

In this paper, available elimination techniques are assessed. OLGA2000 software is used to simulate severe slugging formation mechanism in certain offshore riser. The simulation results show that pressure fluctuations of riser base and riser top is very large and severe slugging easily forms. Sensibility analysis shows that the measures and methods which include properly reducing pipe riser diameter, reducing water cut increasing terminal pressure, decreasing the height and inclination of riser and increasing GOR can eliminate or control severe slugging in riser pipe.

Formation and Structure of Composite Coating of HAD and Micro-Plasma Oxidation on A3 Steel

Composite coatings were obtained on A3 steel by hot dipping aluminum(HAD) at 720 degreesC for 6 min and micro-plasma oxidation (MPO) in alkali electrolyte. The surface morphology, element distribution and interface structure of composite coatings were studied by means of XRD, SEM and EDS. The results show that the composite coatings obtained through HAD/MPO on A3 steel consist of four layers. From the surface to the substrate, the layer is loose Al2O3 ceramic, compact Al2O3 ceramic, At and FeAl intermetallic compound layer in turn. The adhesions among all the layers are strengthened because the ceramic layer formed at the At surface originally, FeAl intermetallic compound layer and substrate are combined in metallurgical form through mutual diffusion during HAD process. Initial experiment results disclose that the anti-corrosion performance and wear resistance of composite coating are obviously improved through HAD/MPO treatment.

Chemical equilibrium analysis and CFD simulation of coal combustion and NOx formation

A full two-fluid model of reacting gas-particle flows with an algebraic unified second-order moment (AUSM) turbulence-chemistry model is used to simulate Beijing coal combustion and NOx formation. The sub-models are the k-epsilon-kp two-phase turbulence model, the EBU-Arrhenius volatile and CO combustion model, the six-flux radiation model, coal devolatilization model and char combustion model. The blocking effect on NOx formation is discussed. In addition, the chemical equilibrium analysis is used to predict NOx concentration at different temperature. Results of CID simulation and chemical equilibrium analysis show that, optimizing air dynamic parameters can delay the NOx formation and decrease NOx emission, but it is effective only in a restricted range. In order to decrease NOx emission near to zero, the re-burning or other chemical methods must be used.

Numerical Solution for Polymer Transient Flows in a Circle Bounded Composite Formation

A new numerical model for transient flows of polymer solution in a circular bounded composite formation is presented in this paper. Typical curves of the wellbore transient pressure are yielded by FEM. The effects of non-Newtonian power-law index, mobility and boundary distance have been considered. It is found that for the mobility ratio larger than 1, which is favorable for the polymer flooding, the pressure derivative curve in log-log form rises up without any hollow. On the other hand, if the pressure derivative curve has a hollow and then is raised up, we say that the polymer flooding fails. Finally, the new model has been extended to more complicated boundary case.

Nanocrystalline Formation during Mechanical Attrition of Cobalt

The nanocrystalline (nc) formation was studied in cobalt (a mixture of c (hexagonal close packed) and gamma (face-centered cubic) phases) subjected to surface mechanical attrition treatment. Electron microscopy revealed the operation of {10(1) over bar 0}< 11(2) over bar 0 > prismatic and {0001}< 11(2) over bar 0 > basal slip in the E phase, leading to the successive subdivision of grains to nanoscale. In particular, the dislocation splitting into the stacking faults was observed to occur in ultrafine and nc grains. By contrast, the planar dislocation arrays, twins and martensites were evidenced in the gamma phase. The strain-induced gamma ->epsilon martensitic transformation was found to progress continuously in ultrafine and nc grains as the strain increased. The nc formation in the gamma phase was interpreted in terms of the martensitic transformation and twinning.

Formation of dendritic nanostructures in Pyrex glass anodically bonded to silicon coated with an aluminum thin film

Anodic bonding with thin films of metal or alloy as an intermediate layer, finds increasing applications in micro/nanoelectromechanical systems. At the bonding temperature of 350 degrees C, voltage of 400 V, and 30 min duration, the anodic bonding is completed between Pyrex glass and crystalline silicon coated with an aluminum thin film with a thickness comprised between 50 and 230 nm. Sodium-depleted layers and dendritic nanostructures were observed in Pyrex 7740 glass adjacent to the bonding interface. The sodium depletion width does not increase remarkably with the thickness of aluminum film. The dendritic nanostructures result from aluminum diffusion into the Pyrex glass. This experimental research is expected to enhance the understanding of how the depletion layer and dendritic nanostructures affect the quality of anodic bonding. (C) 2007 Elsevier B.V. All rights reserved.

Pendleton Artificial Reef: annual progress report presented to Southern California Edison Company

(PDF contains 82 pages.)

Influence of Training Set Selection in Artificial Neural Network-Based Propagation Path Loss Predictions

This paper analyzes the use of artificial neural networks (ANNs) for predicting the received power/path loss in both outdoor and indoor links. The approach followed has been a combined use of ANNs and ray-tracing, the latter allowing the identification and parameterization of the so-called dominant path. A complete description of the process for creating and training an ANN-based model is presented with special emphasis on the training process. More specifically, we will be discussing various techniques to arrive at valid predictions focusing on an optimum selection of the training set. A quantitative analysis based on results from two narrowband measurement campaigns, one outdoors and the other indoors, is also presented.

Técnicas de Inteligencia Artificial integradas en una aplicación de gestión para una casa rural en JQueryMobile y Protégé Frames.

Este proyecto plantea el reto de realizar una aplicación web para la gestión y control de una casa rural desde dispositivos móviles como smartphones y tabletas, con una interfaz de propietario para gestionar de manera dinámica las diferentes partes de la misma, así como la inclusión de una zona de niños donde se aplicarán tecnologías de Inteligencia Artificial en concreto representación del conocimiento mediante “frames”, donde se permitirá a los usuarios realizar preguntas al sistema para intentar adivinar un árbol que previamente la propietaria de la casa rural habrá establecido. El objetivo no es elaborar un sistema experto, tarea que requeriría muchas más horas que las que corresponden a un proyecto de fin de carrera, sino comprobar la posibilidad de integración de estas herramientas en una aplicación orientada a dispositivos móviles. Se emplearán las funcionalidades de HTML5 para la inclusión de la “zona explorador” donde los niños podrán geo localizar árboles, así como su posterior búsqueda a modo de GPS donde los usuarios podrán ver donde está situado el árbol que desean buscar y su posición actual, la cual se irá actualizando automáticamente.

Expected Fair Allocation in Farsighted Network Formation

I consider cooperation situations where players have network relations. Networks evolve according to a stationary transition probability matrix and at each moment in time players receive payoffs from a stationary allocation rule. Players discount the future by a common factor. The pair formed by an allocation rule and a transition probability matrix is called expected fair if for every link in the network both participants gain, marginally, and in discounted, expected terms, the same from it; and it is called a pairwise network formation procedure if the probability that a link is created (or eliminated) is positive if the discounted, expected gains to its two participants are positive too. The main result is the existence, for the discount factor small enough, of an expected fair and pairwise network formation procedure where the allocation rule is component balanced, meaning it distributes the total value of any maximal connected subnetwork among its participants. This existence result holds for all discount factors when the pairwise network formation procedure is restricted. I finally provide some comparison with previous models of farsighted network formation.

Artificial fertilization of the eggs, and rearing and identification of the larvae of the anchoveta, Cetengraulis mysticetus

ENGLISH: The anchoveta, Cetengraulis mysticetus (Günther), is an important bait fish used to capture tunas in the Eastern Tropical Pacific Ocean. Contributions to the early life history of this species in the Gulf of Panama were made by Simpson (1959), who was able to identify deductively the planktonic egg of the anchoveta from 10 other anchovy eggs concurrently present. He also reared these planktonic eggs in the laboratory and described the resultant larvae to the age of 48 hours after hatching. Because of the lack of differences among the anchovy larvae, this description does not permit the identification of anchoveta larvae from those of other engraulid species. Furthermore, while adult specimens are easily recognized, up to the present it has not been possible to extend the identification of the juvenile anchoveta to specimens smaller than about 25 mm. The purpose of this study, therefore, was to identify anchoveta from the time of hatching to about 25 mm. SPANISH: La anchoveta, Cetengraulis mysticetus (Günther), es un importante pez de carnada que se emplea en la captura de los atunes en el Océano Pacífico Oriental Tropical. Simpson (1959) logró identificar deductivamente el huevo planctónico de la anchoveta al separarlo de otros diez huevos de anchoas que se encuentran al mismo tiempo, contribuyendo de esta manera a conocer los primeros estados de la historia natural de esta especie en el Golfo de Panamá. El también estableció un criadero en el laboratorio con estos huevos planctónicos y describió las larvas resultantes hasta la edad de 48 horas después de la eclosión. Debido a que no hay diferencias entre las larvas de las anchoas, esta descripción no permite identificar las larvas de la anchoveta de las otras especies de engráulidos. Más aun, a pesar de que los especímenes adultos son fácilmente reconocibles, hasta ahora no ha sido posible identificar la anchoveta juvenil de menos de unos 25 mm. Consecuentemente, el propósito del presente estudio ha sido el de identificar al anchoveta desde el momento de la eclosión hasta que tiene unos 25 mm.