Comparative evaluation of inversion approaches of the radiative transfer model for estimation of crop biophysical parameters

The inversion of canopy reflectance models is widely used for the retrieval of vegetation properties from remote sensing. This study evaluates the retrieval of soybean biophysical variables of leaf area index, leaf chlorophyll content, canopy chlorophyll content, and equivalent leaf water thickness from proximal reflectance data integrated broadbands corresponding to moderate resolution imaging spectroradiometer, thematic mapper, and linear imaging self scanning sensors through inversion of the canopy radiative transfer model, PROSAIL. Three different inversion approaches namely the look-up table, genetic algorithm, and artificial neural network were used and performances were evaluated. Application of the genetic algorithm for crop parameter retrieval is a new attempt among the variety of optimization problems in remote sensing which have been successfully demonstrated in the present study. Its performance was as good as that of the look-up table approach and the artificial neural network was a poor performer. The general order of estimation accuracy for para-meters irrespective of inversion approaches was leaf area index > canopy chlorophyll content > leaf chlorophyll content > equivalent leaf water thickness. Performance of inversion was comparable for broadband reflectances of all three sensors in the optical region with insignificant differences in estimation accuracy among them.

Parametric Studies on Saltwater Intrusion into Coastal Aquifers for Anticipate Sea Level Rise

Saltwater intrusion into coastal aquifers is a global issue, exacerbated by increasing demands for freshwater in coastal regions. This study investigates into the parametric analysis on saltwater intrusion in a conceptual, coastal, unconfined aquifer considering wide range of freshwater draft and anticipated sea level rise. The saltwater intrusion under various circumstances is simulated through parametric studies using MODFLOW, MT3DMS and SEAWAT. The MODFLOW is used to simulate the groundwater flow system under changing hydro-dynamics in coastal aquifer. To simulate solute transport MT3DMS and SEAWAT is used. The saltwater intrusion process has direct bearing on hydraulic conductivity and inversely related to porosity. It may also be noted that increase in recharge rate considered in the study does not have much influence on saltwater intrusion. Effect of freshwater draft at locations beyond half of the width of the aquifer considered has marginal effect and hence can be considered as safe zone for freshwater withdrawals. Due to the climate change effect, the anticipated rise in sea level of 0.88 m over a century is considered in the investigation. This causes increase in salinity intrusion by about 25%. The combined effect of sea level rise and freshwater draft (C) 2015 The Authors. Published by Elsevier B.V.

Evaluating Methods to Predict Streamflow at Ungauged Sites using Regional Flow Duration Curves: A Case Study

Precise information on streamflows is of major importance for planning and monitoring of water resources schemes related to hydro power, water supply, irrigation, flood control, and for maintaining ecosystem. Engineers encounter challenges when streamflow data are either unavailable or inadequate at target locations. To address these challenges, there have been efforts to develop methodologies that facilitate prediction of streamflow at ungauged sites. Conventionally, time intensive and data exhaustive rainfall-runoff models are used to arrive at streamflow at ungauged sites. Most recent studies show improved methods based on regionalization using Flow Duration Curves (FDCs). A FDC is a graphical representation of streamflow variability, which is a plot between streamflow values and their corresponding exceedance probabilities that are determined using a plotting position formula. It provides information on the percentage of time any specified magnitude of streamflow is equaled or exceeded. The present study assesses the effectiveness of two methods to predict streamflow at ungauged sites by application to catchments in Mahanadi river basin, India. The methods considered are (i) Regional flow duration curve method, and (ii) Area Ratio method. The first method involves (a) the development of regression relationships between percentile flows and attributes of catchments in the study area, (b) use of the relationships to construct regional FDC for the ungauged site, and (c) use of a spatial interpolation technique to decode information in FDC to construct streamflow time series for the ungauged site. Area ratio method is conventionally used to transfer streamflow related information from gauged sites to ungauged sites. Attributes that have been considered for the analysis include variables representing hydrology, climatology, topography, land-use/land- cover and soil properties corresponding to catchments in the study area. Effectiveness of the presented methods is assessed using jack knife cross-validation. Conclusions based on the study are presented and discussed. (C) 2015 The Authors. Published by Elsevier B.V.

Enhanced sunlight photocatalytic activity of Ag3PO4 decorated novel combustion synthesis derived TiO2 nanobelts for dye and bacterial degradation

This study demonstrates the synthesis of TiO2 nanobelts using solution combustion derived TiO2 with enhanced photocatalytic activity for dye degradation and bacterial inactivation. Hydrothermal treatment of combustion synthesized TiO2 resulted in unique partially etched TiO2 nanobelts and Ag3PO4 was decorated using the co-precipitation method. The catalyst particles were characterized using X-ray diffraction analysis, BET surface area analysis, diffuse reflectance and electron microscopy. The photocatalytic properties of the composites of Ag3PO4 with pristine combustion synthesized TiO2 and commercial TiO2 under sunlight were compared. Therefore the studies conducted proved that the novel Ag3PO4/unique combustion synthesis derived TiO2 nanobelt composites exhibited extended light absorption, better charge transfer mechanism and higher generation of hydroxyl and hole radicals. These properties resulted in enhanced photodegradation of dyes and bacteria when compared to the commercial TiO2 nanocomposite. These findings have important implications in designing new photocatalysts for water purification.

Perceptions of priority issues in the conservation of biodiversity and ecosystems in India

We report on the results of a country-wide survey of people's perceptions of issues relating to the conservation of biodiversity and ecosystems in India. Our survey, mainly conducted online, yielded 572 respondents, mostly among educated, urban and sub-urban citizens interested in ecological and environmental issues. 3160 ``raw'' questions generated by the survey were iteratively processed by a group of ecologists, environmental and conservation scientists to produce the primary result of this study: a summarized list of 152 priority questions for the conservation of India's biodiversity and ecosystems, which range across 17 broad thematic classes. Of these, three thematic classes-''Policy and Governance'', ``Biodiversity and Endangered Species'' and ``Protection and Conservation''-accounted for the largest number of questions. A comparative analysis of the results of this study with those from similar studies in other regions brought out interesting regional differences in the thematic classes of questions that were emphasized and suggest that local context plays a large role in determining emergent themes. We believe that the ready list of priority issues generated by this study can be a useful guiding framework for conservation practitioners, researchers, citizens, policy makers and funders to focus their resources and efforts in India's conservation research, action and funding landscape. (C) 2015 Elsevier Ltd. All rights reserved.

Homing abilities of the tropical primitively eusocial paper wasp Ropalidia marginata

Compared to our extensive knowledge about the navigation and homing abilities of ants and bees, we know rather little about these phenomena in social wasps. Here, we report the homing abilities of the tropical primitively eusocial wasp Ropalidia marginata and the factors that affect their homing success. To determine from how far these wasps can return to their nests, we transported foragers blindfold and released them at gradually increasing distances from their nests in four cardinal directions. Their homing success was determined by checking their presence on their nests on three consecutive nights. All foragers (56 individuals, 115 releases) returned back from an area of 0.73 +/- A 0.25 km(2) on the day of release (minimal homing area), whereas 83.8 % of the foragers (217 individuals, 420 releases) returned when we enlarged the area of release to 6.22 +/- A 0.66 km(2) around their nests (maximal homing area). Of 66 releases, no wasps returned from beyond the maximal homing area. The minimal homing area might be familiar to the foragers because they probably routinely forage in this area and the maximal homing area represents the maximum distances from which the wasps are capable of returning to their nests, with or without familiarity.

In-doped multifilled n-type skutterudites with ZT=1.8

In this paper we maximize the thermoelectric (TE) figure of merit, ZT, of n-type skutterudites, (In,Sr,Ba,Yb)(y)Co4Sb12, via three different routes: (i) find the optimum fraction of In as fourth filler (ii) check the influence of powder particle, grain, and crystallite size on the TE properties and (iii) check thermal stability. Filled n-type (Sr, Ba, Yb)(y)Co4Sb12 was mixed in three different proportions with In0.4Co4Sb12, ball milled (regular or high-energy (HB) ball milling) and hot-pressed. Particle size analyses and SEM pictures of the broken surfaces of the hot pressed samples document that only HB produces uniform particles/grains with average crystallite sizes similar to 100 nm, proven by transmission electron microscopy. X-ray Rietveld refinements combined with EDX indicate that in all cases indium entered the icosahedral voids of the skutterudite. Temperature dependent physical properties of all three regularly ball-milled samples show that increasing In-content infers an increasing electrical resistivity, increasing Seebeck coefficient but a decreasing total thermal conductivity. Although ZT (823 K) is in the same range as for the sample without In, the ZT values in the whole temperature range are higher and consequently the TE-conversion efficiency, eta is at least 10% higher. Annealing the samples at 600 degrees C for three days shows minor changes in structure and thermoelectric properties, indicating TE stability. The HB sample, due to uniformly small particles, equally sized grains and crystallites, exhibits a high power factor (4.4 mW/m K-2 at 730 K) and a very low thermal conductivity leading to an outstanding high ZT = 1.8 at 823 K (eta(max) = 17.5%). (C) 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Crustal Evolution of Kolli-Massif, Southern India

Southern India is a collage of numerous crustal fragments formed since the Archean (2500 Ma ago) and reworked several times during the geological history. A close look at these terrains provides a window to understand the crustal evolutionary processes experienced by the continental crust in the past, such as crustal growth (formation of crust through addition of new magma) and crustal reworking (modification of an already existing crust). Here we discuss the evolutionary history of such a crustal fragment from the Southern Granulite Terrain (SGT) in peninsular India, namely Kolli-massif. Geology, structural deformation through time, and the implications in crustal assembly of southern India are exponded.

Homogeneous Hermitian holomorphic vector bundles and the Cowen-Douglas class over bounded symmetric domains

It is known that all the vector bundles of the title can be obtained by holomorphic induction from representations of a certain parabolic group on finite-dimensional inner product spaces. The representations, and the induced bundles, have composition series with irreducible factors. We write down an equivariant constant coefficient differential operator that intertwines the bundle with the direct sum of its irreducible factors. As an application, we show that in the case of the closed unit ball in C-n all homogeneous n-tuples of Cowen-Douglas operators are similar to direct sums of certain basic n-tuples. (c) 2015 Academie des sciences. Published by Elsevier Masson SAS. All rights reserved.

Measurement of Mechanical Properties of MEMS Materials

微电子机械系统（MEMS）技术的迅速崛起,推动了所用材料微尺度力学性能测试技术的发展.首先按作用方式将实验分成压痕/划痕、弯曲、拉伸、扭转四大类,系统介绍检测MEMS材料微尺度力学性能的微型试样、测试方法及其实验结果.测试材料主要有硅、氧化硅、氮化硅和一些金属.实验结果主要包括基本的力学性能参数如弹性模量、残余应力、屈服强度、断裂强度和疲劳强度等.最后,简要分析了未来的发展需求.

Influencia de diferentes periodos de destete en conejas primiparas en el municipio de Diriamba, Departamento de Carazo, Nicaragua

Este trabajo fue realizado en la Quinta "Myriam", ubicada en el municipio de Diriamba, departamento de Carazo, Nicaragua, propiedad del Dr. Jorge Ferreira. La ubicación geográfica del municipio está comprendida entre los 11° 50' y 12° 00' de Latitud Norte y entre los 86° 00' y 86° 15' de Longitud Oeste, cuenta con una elevación de 551 m.s.n.m., los datos meteorológicos de la zona en los últimos cuatro años (90-93) en cuanto a temperatura, humedad relativa y precipitación promedio fueron: 23.8 °C, 84% y 1184,5 mm respectivamente, (INETER, Departamento de Estadística, 1993). En el presente ensayo, se utilizó un diseño estadístico completamente aleatorizado (DCA), mediante el cual se evaluó el efecto de 3 tratamientos (15, 30 y 45 días de destete) sobre las variables Peso de la Camada al Destete (PCD), Peso de la Madre al Destete (PMD), Peso de la Madre al Segundo Parto (PSP), Ganancia Media Diaria del Parto 1 al Parto 2 (GMDp 1.P2) , con 4 repeticiones por tratamiento, éstas repeticiones estuvieron constituidas por conejas primíparas, las cuales tuvieron un peso que osciló entre 3 - 3.18 kg. y edad homogénea de 7 meses. Las variables fueron sometidas a la prueba de Duncan para determinar la superioridad en rango por tratamiento. Mediante el análisis de varianza se encontró que el efecto de los tratamientos resultó ser altamente significativo sobre la variable Peso de la Camada al Destete (PCD) (P0.01), significativo sobre las variables Peso de la Madre al Segundo Parto (PSP) y Ganancia Media Diaria del Parto 1 al Parto 2 (GMD p 1.P2) (P0.1) y no significativo sobre la variable Peso de la Madre al Destete (PMD) (NS). El efecto de la covariable Peso al Primer Parto (P1P) resultó ser altamente significativo sobre las variables Peso de la Madre al Destete (PMD) y Peso de la Madre al Segundo Parto (PSP) (P0.01). Después de someter las variables a la prueba de DUNCAN se encontraron los siguientes promedios por tratamiento: Peso de la Camada al Destete (PCD) ; T.15 días 1.538 kg P.V.(C), T.30 días 3.360 kg P.V. (B), T.45 días 4.523 kg P.V. (A), Peso de la Madre al Destete (PMD); T.15 días 3.649 kg P.V. (A) T.30 días 3.549 kg P.V. (A), T.45 dias 3.493 kg P.V.(A). Peso de la Madre al Segundo Parto (PSP); T.15 días 3. 449 kg P.V. (B), T.30 días 3.628 kg P.V. (AB), T.45 días 3.777 kg P.V.(A). Ganancia Media Diaria del Parto 1 al Parto 2 (GMD p 1.P2) T .15 días (2.071 g (B), T.30 días 2.718 g (AB), T.45 días 2. 975 g (A). Los promedios y desviaciones standard para las variables Ganancia Media Diaria del Parto 1 al Destete 1 (GMDp1-D1)y Ganancia Media Diaria del Destete l al Parto 2 (GMDD1.P2) por tratamiento fueron: GMD P1-D1; T.l5 días 3.84 g ± 0.50 g, T.30 días 2.54 g ± 0.64 g, T.45 días 2.37 g ± 0.72 g. GMD D1-P2; T.l5 días 2.26 g ± 0.54 g, T.30 días 3.17 g ± 0.74 g, T.45 días 3.93 g ± 0.28 g. Se encontró que el alimento tipo único suministrado a los animales bajo experimentación, cumplió con los requerimientos nutricionales de la especie estudiada. Los costos encontrados por hembra, por tratamiento, fueron C$ 197.21 destete de 15 días, C$ 220.28 destete de 30 días, C$ 243 .1.4 destete de 45 días. Los costos por gazapo destetado fueron de C$ 5.48 destete de 15 días, C$ 6.12 destete de 30 días, C$ 8.10 destete de 45 días.

Influencia de rotación de cultivos y métodos de control sobre la dinámica de las malezas y el crecimiento, desarrollo y rendimiento del sorgo (Sorghum bicolor (L) Moench) var. D-55)

En la Estación Experimental de Las Mercedes municipio de Managua, se inició en la época de postrera en 1991, un experimento de rotación de cultivos bajo diferentes niveles de control de malezas. El presente trabajo evaluó el efecto de los cultivos antecesores sorgo, maíz y pepino con tres niveles de control de malezas : químico, período crítico y limpias periódicas a la dinámica de la cenosis de malezas, crecimiento y rendimiento del cultivo sucesor sorgo. Cuando antecedió el pepino la abundancia de maleza fue mayor con 504 Ind/m2 reduciéndose considerablemente a la cosecha obteniendo una biomasa promedio de 133.9 gr/m2. Sucedió lo contrario con maíz como cultivo antecesor ya que al principio la abundancia fue de 201 Ind/m2 y se obtuvo la mayor biomasa con 259.8 gr/m2 y para sorgo-sorgo tuvo valores de 232 Ind/m2 y a la cosecha en menor valor en biomasa de sorgo 130.0 gr/m2. En el rendimiento se enmarcó una tendencia a favor de maíz como cultivo antecesor con 1878 Kg/ha de sorgo, mientras sorgo-sorgo obtuvo un rendimiento de 1839 Kg/ha comparándose con pepino como antecesor con 1832 Kg/ha de sorgo. Comparando los controles aquí hubo diferencias significativas y en mayor valor le correspondió al control químico con 2048.0 Kg/ha, control período crítico con 1786 Kg/ha y el menor valor le correspondió a limpia periódica con sólo 1715 Kg/ha. En el control período crítico presentó mayor abundancia la maleza al inicio con 444 Ind/m2, teniendo una reducción hasta 62 Ind/m2 en la cosecha. El control químico tuvo un comportamiento similar que el control período crítico con 295 Ind/m2, reduciendo al final del ciclo con 135 Ind/m2. El control limpias periódicas tuvo al inicio la menor abundancia con 200 Ind/m2, reduciendo a la cosecha a 3 Ind/m2.

Theoretical investigation of epitaxial deformation and the hcp-bcc transition of alkali metals

The deformation of alkali metals K, Rb, and Cs under epitaxial deformation is studied via the ab initio pseudopotential plane wave method using the local-density approximation. Under loading from the stable fee phase, metastable stares along directions [001], [111], and [201] are identified. One metastable state, presented at direction [201], has a very low symmetry in contrast to the planes [001] and [201]. Our results show that the softening direction and sequences of growth is significantly affected by the existence of the metastable states and magnitude of the energy barrier. The resulting softening sequences from soft to hard are [201], [110], [001], and [111] under biaxial compression and [001], [111], [201], and [110] under biaxial tension. An orthorhombic deformation path is used to investigate the fact, that the structure of the alkali films K and Cs evolve from the quasihexagonal structure into the (110)-oriented bcc structure, observed by experiments.

A comparison of winter pre-heating requirements for natural displacement and natural mixing ventilation

In winter, natural ventilation can be achieved either through mixing ventilation or upward displacement ventilation (P.F. Linden, The fluid mechanics of natural ventilation, Annual Review of Fluid Mechanics 31 (1999) pp. 201-238). We show there is a significant energy saving possible by using mixing ventilation, in the case that the internal heat gains are significant, and illustrate these savings using an idealized model, which predicts that with internal heat gains of order 0.1 kW per person, mixing ventilation uses of a fraction of order 0.2-0.4 of the heat load of displacement ventilation assuming a well-insulated building. We then describe a strategy for such mixing natural ventilation in an atrium style building in which the rooms surrounding the atrium are able to vent directly to the exterior and also through the atrium to the exterior. The results are motivated by the desire to reduce the energy burden in large public buildings such as hospitals, schools or office buildings centred on atria. We illustrate a strategy for the natural mixing ventilation in order that the rooms surrounding the atrium receive both pre-heated but also sufficiently fresh air, while the central atrium zone remains warm. We test the principles with some laboratory experiments in which a model air chamber is ventilated using both mixing and displacement ventilation, and compare the energy loads in each case. We conclude with a discussion of the potential applications of the approach within the context of open plan atria type office buildings.