Wave propagation in a micropolar fluid contained in a visco-elastic membrane

The aim of the paper is to investigate the propagation of a pulse in a micropolar fluid contained in a visco-elastic membrane. It was undertaken with a view to study how closely we can approximate the flow of blood in arteries by the above model. We find that for large Reynolds number, the effect of micropolarity is hardly perceptible, whereas for small Reynolds numbers it is of considerable importance.

The Raman spectrum of boric acid

The Raman spectrum of crystalline boric acid is recorded using mercuryλ2537 excitation. Fifteen Raman lines, three of them belonging to the lattice spectrum, are reported. Satisfactory assignments of all the observed Raman frequencies are made using the available X-ray crystal structure data. From the presence of a new high frequency Raman band at about 3420 cm.−1 it is suggested that there might be a small number of long, weak O-H....O hydrogen bonds in the crystal, in addition to the hydrogen bonds of moderate strength reported from X-ray diffraction data.

Role of entropy in the stability of cobalt titanates

The standard molar Gibbs free energy of formation of Co2TiO4, CoTiO3,and CoTi2O5 as a function of temperature over an extended range (900 to 1675) K was measured using solid-state electrochemical cells incorporating yttria-stabilized zirconia as the electrolyte, with CoO as reference electrode and appropriate working electrodes. For the formation of the three compounds from their component oxides CoO with rock-salt and TiO2 with rutile structure, the Gibbs free energy changes are given by:Delta(f)G degrees((ox))(Co2TiO4) +/- 104/(J . mol(-1)) = -18865 - 4.108 (T/K)Delta(f)G degrees((ox))(CoTiO3) +/- 56/(J . mol(-1)) = -19627 + 2.542 (T/K) Delta(f)G degrees((ox))(CoTi2O5) +/- 52/(J . mol(-1)) = -6223 - 6.933 (T/K) Accurate values for enthalpy and entropy of formation were derived. The compounds Co2TiO4 with spinel structure and CoTi2O5 with pseudo-brookite structure were found to be entropy stabilized. The relatively high entropy of these compounds arises from the mixing of cations on specific crystallographic sites. The stoichiometry of CoTiO3 was confirmed by inert gas fusion analysis for oxygen. Because of partial oxidation of cobalt in air, the composition corresponding to the compound Co2TiO4 falls inside a two-phase field containing the spinet solid solution Co2TiO4-Co3O4 and CoTiO3. The spinel solid solution becomes progressively enriched in Co3O4 with decreasing temperature. (c) 2010 Elsevier Ltd. All rights reserved.

Painehaavapotilaille tehtyjen hoitointerventioiden määrä ja tulokset HYKS:n plastiikkakirurgian klinikassa

Keräsimme ICD-10 koodilla L89 HYKS:n plastiikkakirurgian klinikassa hoidetuista 401:stä potilaasta hoitotiedot vuosilta 2000-2008. Plastiikkakirurgiseen leikkaukseen ja hoidon arvioon päätyneiden potilaiden keski-ikä oli 60,3 (18-97v.). Painehaavan riskitekijät selvitettiin. Yksittäisistä riskitekijöistä yleisimpiä olivat paraplegia ( n=77; 17% ) ja diabetes/ASO tauti ( n=53; 12 % ). Yhteensä painehaavaleikkauksia tehtiin 347 , joista revisioleikkauksia 108 ja varsinaisia sulkuleikkauksia oli 239. Keskimäärin potilaat tarvitsivat 1.7 operaatiota. Leikatuista painehaavoista gradus III- haavoja oli 35,1% ; n= 84 ja gradus IV 25,5% ; n= 61, pinta-ala haavoilla oli keskimäärin 30,5 cm2. Istuinkyhmyjen ja sacrumin painehaavat olivat potilasaineistossamme yleisiä (20% ja 27% operoiduista painehaavoista). Gradus III haavoja leikattiin keskimäärin 1,6 kertaa ja gradus IV haavoja keskimäärin 2,0 kertaa. Postoperatiivisia poliklinikkakäyntejä tarvittiin keskimäärin 2,3, gradus III painehaavapotilailla 2,0 ja gradus IV potilailla 2,6 käyntiä. Leikkausmenetelmistä eri kielekerekonstruktiot olivat selkeästi eniten käytetty leikkausmenetelmä painehaavaleikkauksissa: 58 % rekonstruktioleikkauksista suoritettiin käyttäen jonkinlaista iho- lihaskielekettä. (134 sanaa)

Nonlinear aeroelasticity of rotating and flapping wings - a review

The interaction between large deflections, rotation effects and unsteady aerodynamics makes the dynamic analysis of rotating and flapping wing a nonlinear aeroelastic problem. This problem is governed by nonlinear periodic partial differential equations whose solution is needed to calculate the response and loads acting on vehicles using rotary or flapping wings for lift generation. We look at three important problems in this paper. The first problem shows the effect of nonlinear phenomenon coming from piezoelectric actuators used for helicopter vibration control. The second problem looks at the propagation on material uncertainty on the nonlinear response, vibration and aeroelastic stability of a composite helicopter rotor. The third problem considers the use of piezoelectric actuators for generating large motions in a dragonfly inspired flapping wing. These problems provide interesting insights into nonlinear aeroelasticity and show the likelihood of surprising phenomenon which needs to be considered during the design of rotary and flapping wing vehicle

Kelan opintoetuustilasto 2009/10

Kelan opintoetuustilasto 2009/10 -julkaisu sisältää keskeiset tiedot Kelan maksamista opintotuista ja koulumatkatuista sekä Kelan myöntämästä aikuiskoulutustukeen liittyvästä opintolainan valtiontakauksesta. Julkaisu tarjoaa tilastoja näiden etuuksien saajista ja maksetuista euromääristä. Opintotuesta esitetään myös opintolainoja, korkeakouluopiskelijoiden ateriatukea ja opintolainavähennystä koskevia tietoja.

Essays on Stock Market Reactions to New Information

A functioning stock market is an essential component of a competitive economy, since it provides a mechanism for allocating the economy’s capital stock. In an ideal situation, the stock market will steer capital in a manner that maximizes the total utility of the economy. As prices of traded stocks depend on and vary with information available to investors, it is apparent that information plays a crucial role in a functioning stock market. However, even though information indisputably matters, several issues regarding how stock markets process and react to new information still remain unanswered. The purpose of this thesis is to explore the link between new information and stock market reactions. The first essay utilizes new methodological tools in order to investigate the average reaction of investors to new financial statement information. The second essay explores the behavior of different types of investors when new financial statement information is disclosed to the market. The third essay looks into the interrelation between investor size, behavior and overconfidence. The fourth essay approaches the puzzle of negative skewness in stock returns from an altogether different angle than previous studies. The first essay presents evidence of the second derivatives of some financial statement signals containing more information than the first derivatives. Further, empirical evidence also indicates that some of the investigated signals proxy risk while others contain information priced with a delay. The second essay documents different categories of investors demonstrating systematical differences in their behavior when new financial statement information arrives to the market. In addition, a theoretical model building on differences in investor overconfidence is put forward in order to explain the observed behavior. The third essay shows that investor size describes investor behavior very well. This finding is predicted by the model proposed in the second essay, and hence strengthens the model. The behavioral differences between investors of different size furthermore have significant economic implications. Finally, the fourth essay finds strong evidence of management news disclosure practices causing negative skewness in stock returns.

Personnel Managers and Crisis Situations. Emotion-handling Strategies

This study focuses on personnel managers in crisis situations. The interviewed personnel managers referred to emotions as a central element to be dealt with in a crisis. However, until recently, the exploration of emotions in organisational life has been de-emphasised or ignored. This study aims to bring to the surface aspects of personnel work that have so far been neglected or remained invisible. It specifically examines how personnel managers handle employees’ and their own emotions in a crisis. Based on the interviews, a number of emotional episodes were constructed. They describe the type and context of the crisis and the person(s) whose emotions are handled. The main findings of the study are the five emotion-handling strategies that could be constructed from the data. The negotiation-like manner in which personnel managers handled emotions in crisis situations proved especially interesting. They were actually negotiating emotional value for their organisations. Further, they handled their own emotions within the frame of two logics of appropriateness labelled mothering and guide-following. The episodes described also enabled identification of the values enacted by the personnel managers in handling emotions. The study provides descriptive information on emotion handling, a current and relevant feature in the practice of personnel management. It seeks to offer a frame for developing practical principles that can be helpful in a crisis. It also offers the opportunity to consider a variety of difficult situations that personnel managers may confront in their work.

Increasing Knowledge Focus - a Means for Entrepreneurs to Remain on a Growth Path: Essays on the Role and Nature of Knowledge Management in Finnish SMEs (summary section only)

This study explores the role and nature of knowledge management (KM) in small and medium-sized companies (SMEs). Even though the role of knowledge as a competitive advantage is commonly recognized in the SME sector, almost no attention has been paid to the managing and developing of knowledge in SMEs. This thesis consists of three different sub-studies that were reported in four individual essays. The results of the questionnaire study indicate that nearly all companies that responded to the questionnaire (N = 108) found intangible assets, i.e. knowledge resources to be their main source of competitive advantage. However, only less than a third of the companies actively deal with knowledge management. The results also indicate a significant correlation between activity in knowledge management and sustainable organic growth of the company. The interview study (N = 10) explored the context and motives of the SMEs for managing their intangible assets, and the concrete practices of knowledge management. It turned out that KM facilitated change management, clarification of the vision and new strategy formulation. All the interviewed companies were aiming at improved innovation process, new ways of doing business and attaining an increased “knowledge focus” in their business. Nearly all also aspired to grow significantly. Thus, KM provides a strategy for these SMEs to guarantee their survival and sustainability in the turbulent markets. The action research was a process to assess and develop intangible resources in three companies. The experienced benefits were the clarification of future focus and strategy, creation of a common language to discuss strategic issues within the company, as well as improved balance of different categories of intangible assets. After the process all the case companies had developed in the chosen key areas. Thus, by systematic knowledge management the implementation of new strategic orientation (knowledge focusing) was facilitated. The findings can be summarized in two main points. First, knowledge management seems to serve the purpose of change, renewal and new strategic orientation in the SMEs. It also seems to be closely related to organic growth and innovation. All of these factors can be considered dimensions of entrepreneurship. Second, the conscious development of intangible assets can increase the balance of different categories of intangible assets and the overall knowledge focusing of business. In the case companies, this in turn facilitated the path to the improved overall performance.

Studies on design, fabrication and reliability assessment of embedded passives on a high-density interconnect (HDI) organic substrate using a sequential build-up process

One of the foremost design considerations in microelectronics miniaturization is the use of embedded passives which provide practical solution. In a typical circuit, over 80 percent of the electronic components are passives such as resistors, inductors, and capacitors that could take up to almost 50 percent of the entire printed circuit board area. By integrating passive components within the substrate instead of being on the surface, embedded passives reduce the system real estate, eliminate the need for discrete and assembly, enhance electrical performance and reliability, and potentially reduce the overall cost. Moreover, it is lead free. Even with these advantages, embedded passive technology is at a relatively immature stage and more characterization and optimization are needed for practical applications leading to its commercialization.This paper presents an entire process from design and fabrication to electrical characterization and reliability test of embedded passives on multilayered microvia organic substrate. Two test vehicles focusing on resistors and capacitors have been designed and fabricated. Embedded capacitors in this study are made with polymer/ceramic nanocomposite (BaTiO3) material to take advantage of low processing temperature of polymers and relatively high dielectric constant of ceramics and the values of these capacitors range from 50 pF to 1.5 nF with capacitance per area of approximately 1.5 nF/cm(2). Limited high frequency measurement of these capacitors was performed. Furthermore, reliability assessments of thermal shock and temperature humidity tests based on JEDEC standards were carried out. Resistors used in this work have been of three types: 1) carbon ink based polymer thick film (PTF), 2) resistor foils with known sheet resistivities which are laminated to printed wiring board (PWB) during a sequential build-up (SBU) process and 3) thin-film resistor plating by electroless method. Realization of embedded resistors on conventional board-level high-loss epoxy (similar to 0.015 at 1 GHz) and proposed low-loss BCB dielectric (similar to 0.0008 at > 40 GHz) has been explored in this study. Ni-P and Ni-W-P alloys were plated using conventional electroless plating, and NiCr and NiCrAlSi foils were used for the foil transfer process. For the first time, Benzocyclobutene (BCB) has been proposed as a board level dielectric for advanced System-on-Package (SOP) module primarily due to its attractive low-loss (for RF application) and thin film (for high density wiring) properties.Although embedded passives are more reliable by eliminating solder joint interconnects, they also introduce other concerns such as cracks, delamination and component instability. More layers may be needed to accommodate the embedded passives, and various materials within the substrate may cause significant thermo -mechanical stress due to coefficient of thermal expansion (CTE) mismatch. In this work, numerical models of embedded capacitors have been developed to qualitatively examine the effects of process conditions and electrical performance due to thermo-mechanical deformations.Also, a prototype working product with the board level design including features of embedded resistors and capacitors are underway. Preliminary results of these are presented.

Construction and use of linear regression models for processor performance analysis

Processor architects have a challenging task of evaluating a large design space consisting of several interacting parameters and optimizations. In order to assist architects in making crucial design decisions, we build linear regression models that relate Processor performance to micro-architecture parameters, using simulation based experiments. We obtain good approximate models using an iterative process in which Akaike's information criteria is used to extract a good linear model from a small set of simulations, and limited further simulation is guided by the model using D-optimal experimental designs. The iterative process is repeated until desired error bounds are achieved. We used this procedure to establish the relationship of the CPI performance response to 26 key micro-architectural parameters using a detailed cycle-by-cycle superscalar processor simulator The resulting models provide a significance ordering on all micro-architectural parameters and their interactions, and explain the performance variations of micro-architectural techniques.