“Of Spitzenkandidaten and European Leaders”: Is the new 2014 "politicized” Presidency of the Commission going to be a real step forward in the EU legitimization process?

Thanks to ART.17.7 of the Lisbon Treaty, the European Council now has to “take into account” the results of EP Elections when selecting a candidate for the role of Commission President. The European Parliament has grabbed the opportunity to launch the first electoral race for spitzenkandidaten to the Presidency. Is this the start of a new democratizing (and thus, politicizing) process for the European Union? This dissertation will try to give a possible answer to the dilemma by constructing a comprehensive framework around EP Elections 2014 that will involve both the Commission and the Parliament and an analysis of the debate beyond legal provisions and the possibility of a politicized presidency of the Commission.

Regenerated cellulose ultrafiltration membranes in the treatment of pulp and paper mill process waters

Ultrafiltration (UF) is widely applied in different separation processes in the pulp and paper industry. The growing need to protect the environment, a lack of pure water and an interest in producing high-value chemicals from compounds present in process waters will probably lead to an increase in the use of UF in the pulp and paper industry. The efficiency and cost-effectiveness of a UF process depends on the applied membrane. The membrane should have a high and stable filtration capacity, a particular selectivity and a long operational lifetime. To meet these requirements a membrane should have a low fouling tendency. In addition, it should withstand the prevailing operational and chemical conditions. This thesis evaluates the performance and applicability of the regenerated cellulose (RC) membranes 00030T and C2 in the treatment of pulp and paper mill process waters based on the requirements above. The results demonstrated that both the tested RC membranes fulfilled well the requirement of high filtration capacity. In addition, in the filtration of a paper mill clear filtrate (CF) the RC membranes were not as greatly affected by variations in the CF quality as a polysulphone membrane. Furthermore, due to their extreme hydrophilicity and weak charge the fouling tendency of the membranes can be expected to be low in pulp and paper mill filtration applications. It is, however, known that fouling cannot be totally avoided even when the membrane is chosen very carefully. This study indicated that carbohydrates influenced negatively on permeability and caused fouling in the filtration of groundwood mill circulation water. Thus, a pre-treatment effectively reducing the amount of carbohydrates might help to maintain a stable capacity. However, the results of the thesis also showed that the removal of some of the possible foulants might just increase the harmful effect of others. Multivariate examination was useful in the understanding of the complicated factors causing the unstable capacity. The thesis also revealed that the 00030T and C2 membranes can be used at high pressure (max. tested pressure 12 bar). The C2 membrane, having a sponge-like substructure, was more pressure resistant, and its performance was more stable at high pressure compared to the UCO30T membrane containing macrovoids in its substructure. Both tested membranes can, according to the results, also be used at temperatures as high as 70°C in acidic, neutral and alkaline conditions. However, the use at extreme conditions might cause faster ageing of the membranes compared to ageing in neutral conditions. The thesis proved that both the tested RC membranes are very suitable for pulp and paper mill applications and that the membranes can be utilised in processes operating in challenging conditions. Thus, they could be used in more demanding applications than supposed earlier.

Facilitating coordination improvement efforts in cross-functional process development programs

Business process improvement is a common approach in increasing the effectiveness of an organization. It can be seen as an effort to increase coordination between units. Process improvement has proved to be challenging, and most management consultation firms facilitate organizations in this kind of initiatives. Cross-functional improvement is one of the main areas for internal consultants as well. However, the needs, challenges and means of cross-functional help have been rarely discussed in the literature. The objective of this thesis is on one hand to present a conceptual and descriptive framework to help understand the challenges of facilitating coordination improvement efforts in cross-functional improvement programs, and on the other hand to develop and test feasible solutions for some facilitation situations. The research questions are: 1. Why and in what kind of situations do organizations need help in developing coordination in cross-functional processes? 2. How can a facilitator help organizations in improving coordination to develop cross-functional processes? The study consists of two parts. The first part is an overview of the dissertation, and the second part comprises six research publications. The theoretical background for the study are the differentiation causing challenges in cross-functional settings, the coordination needed to improve processes, change management principles, methods and tools, and consultation practises. Three of the publications introduce tools for helping in developing prerequisites, planning responsibilities and supporting learning during the cross-functional program. The three other papers present frameworks to help understand and analyse the improvement situation. The main methodological approaches used in this study are design science research, action research and case research. The research data has been collected from ten cases representing different kinds of organizations, processes and developing situations. The data has been collected mainly by observation, semi-structured interviews and questionnaires. The research contributes to the rare literature combining coordination theories and process improvement practises. It also provides additional understanding of a holistic point of view in process improvement situations. The most important contribution is the addition to the theories of facilitating change in process improvement situations. From the managerial point of view, this study gives advice to managers and consultants in planning and executing cross-functional programs. The main factors increasing the need for facilitation are the challenges for differentiation, challenges of organizational change in general, and the novelty of initiatives and improvement practices concerning process development. Organizations need help in creating the prerequisites to change, in planning initiatives, easing conflict management and collaboration between groups, as well as supporting the learning of cross-functional improvement. The main challenges of facilitation are combining the different roles as a consultant, maintaining the ownership for the improvement project with the client, and supporting learning in the client organization.

On the dynamics of exports and FDI: The Spanish Internationalization Process

This paper provides further insights into the dynamics of exports and outward foreign direct investment (FDI) flows in Spain from a time-series approach. The contribution of the paper is twofold: 1) the existence of either substitution or a complementary relationship between Spanish outward investments and exports is empirically tested using a multivariate cointegrated model (VECM). The evolution in exchange flows (1993-2008) and country-specific variables (such as world demand - including Spain’s main recently growing foreign markets - for trade flows and the relative price of exports in order to proxy new global competitors) are taken into account for the first time. And 2) the growth in the trade of services in recent decades leads us to test a specific causality relationship by disaggregating between goods and services flows. Our results provide evidence of a positive (Granger) causality relationship running from FDI to exports of goods (stronger) and to exports of services (weaker) in the long run, the complementarity relation of which is consistent with vertical FDI strategies. In the short run, however, only exports of goods are affected (positively) by FDIs.

Voimalaitoksen BoP-järjestelmien prosessikaavioiden ja -kuvausten suunnitteluohjeistus

Tässä työssä luodaan voimalaitoksen BoP- järjestelmien prosessikaavioiden- ja kuvausten suunnitteluohjeistus Sweco Industy Oy:n energia-yksikölle. BoP- järjestelmiin lukeutuvat tässä kaikki oleellisimmat voimalaitoksen apujärjestelmät kuten esimerkiksi suljettu jäähdytysvesipiiri. Tämä työ on tehty erään Keski-Euroopan alueella sijaitsevan voimalaitosprojektin yhteydessä ja tämä ohjeistus toimii pohjatietona myöhemmin tehtäville täydennyksille. Työn alkuosassa esitellään käytössä oleva piirto-ohjelma sekä sovellettava standardi KKS ja sen käyttö. Käytetyt kaaviotyypit ja niiden sisältö käydään pääpiirteissään läpi. Pääpaino työssä on PI-kaavioiden suunnittelemisen ja piirtämisen ohjeistaminen ja yhdenmukaistaminen. Piirtämiseen ja kaavioiden esittämiseen on kerätty olemassa olevaa tietoa eri suunnittelijoilta joiden avulla on valittu käyttöön tuleva esitystapa. Työn aikana ilmeni ongelmia prosessikaavioiden piirto-ohjelman kanssa. Piirto-ohjelmana käytetty Comos on vielä kehitysvaiheessa ja sen tietokannan ja toiminnan muokkaaminen yhtiön tarpeita vastaavaksi tulee viemään vielä aikaa. Tämä onkin tulevaisuutta ajatellen tärkein kehityskohde.

Expressive writing intervention for mothers following the birth of their premature baby.

The birth of a preterm infant is in most cases unexpected and can be a distressing experience for parents. Parents of premature babies report more stress, experience more adjustment difficulties and need for support during the first year after delivery compared to parents of infants born at term. It has been documented that parents may experience posttraumatic stress reactions, anxiety and depression following the premature birth of their baby, which subsequently may impact on the mother-baby-interactions, their attachment relationship and the cognitive, social and behavioural development of the baby. In this pilot study, we offered an expressive writing intervention to women who recently had a premature baby to alleviate their psychological distress and to improve their physical health. During the expressive writing intervention, women were asked to write down their deepest thoughts and feelings about the most traumatic aspect of their experience of having a premature baby for 15 min over three consecutive days. The aims of the study were as follows: (1) To evaluate the effect of expressive writing on psychological and physical health in women who recently had a premature baby. (2) To evaluate the effect of expressive writing on the use of healthcare services and medication in this population. (3) To evaluate the acceptability and feasibility of this intervention for this population. Forty participants were randomly allocated to either the expressive writing intervention group or a wait list control group. Pre- and post questionnaires to evaluate the effectiveness of the expressive writing intervention, as well as their acceptability and feasibility were completed. The intervention took place when the baby was 3 months of corrected age. Post-measures were completed at 1 and 3 months following the intervention. Results and their clinical implications will be discussed with regards to the implementation of this safe and cost-effective method as a preventative measure in the routine care of women who recently gave birth to a premature baby

Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials

Rapid manufacturing is an advanced manufacturing technology based on layer-by-layer manufacturing to produce a part. This paper presents experimental work carried out to investigate the effects of scan speed, layer thickness, and building direction on the following part features: dimensional error, surface roughness, and mechanical properties for DMLS with DS H20 powder and SLM with CL 20 powder (1.4404/AISI 316L). Findings were evaluated using ANOVA analysis. According to the experimental results, build direction has a significant effect on part quality, in terms of dimensional error and surface roughness. For the SLM process, the build direction has no influence on mechanical properties. Results of this research support industry estimating part quality and mechanical properties before the production of parts with additive manufacturing, using iron-based powders

Analysis of the process of inspection in recreational craft in Spain. Suggestions for safety improvement

Inspections of pleasure boats in Spain can be carried out by collaborating entities of inspection, entities that must be authorized by the Maritime Administration. This authorization allows to perform effective inspections and technical controls of recreational crafts. Recreational crafts are subjected to surveys that are based on the registration list and on the material used in the hull. In addition, required safety equipment of the recreational boat depends on the distance that the recreational boat is authorized to navigate. Following data obtained from inspections of recreational craft, this paper aims to analyze information about hulls within dry and afloat conditions, about the equipment for rescue and safety, and about other nautical equipment; as well as to perform and improve different verifications during the inspections. All this information points to several aspects relevant for the optimization of the inspection process, the ultimate target being increasing efficiency and effectiveness, and ensuring more safety in recreational craft.

The forced adoption of a fast-track appraisal process for a breast cancer treatment in UK

Trastuzumab (Herceptin ®, Roche) is approved in UK for the treatment of the metastatic breast cancer since 2001. As of 2005, concomitantly with the publication of 3 studies that showed it produces a 50% reduction of the recurrence rates of breast cancer, trastuzumab started to be prescribed in the earlt adjuvant treatrnent of this disease. Und June 2006, trastuzumab did not have both: 1) regulatory approval and 2) NICE [National Institute for Health and Clinical Excellence] recommendation for the use in early stages of breast cancer. During the period until June 2006, the trastuzumab use in those patients was not reimbursed and because the cost of trastuzumab is equal with the yearly UK average income, most of patients could not self fund their treatrnent. Before the publication of the final NICE guidance, the new data of trastuzumab in early breast cancer raised enormous patient and professional interest and expectations. A great volume of public and professional pressure was generated to transcend a system by which Primary Care Trusts can reimburse a treatment only after a formal guidance was issued. This paper draw on a case study depicting and analyzing the process by which regulatory approval and NICE recommendations were achieved in a record time and how trastuzumab became a standard treatment on early adjuvant breast cancer. According to the data we gathered in this work we were witnessing one of the fastest processes of adoption of a health care technology since the creation of NICE, in 1999. This study addresses the following research question: How and why does the adoption pattern of trastuzumab differ from the rational decision-making model of the reimbursement process in UK? [Author, p. 4]