1000 resultados para tolerância


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The modern technology of materials and structural integrity of pipelines requests the use of inspection tools named inspection pigs to detect, localize and measure the length, width and depth dimensions of the thickness losses of walls of buried and underwater pipelines in service. These tools run them internally, performing and recording measurements, with performance that varies according to the pig s technology. It has been developed recently an instrumented pig technology, called feller pig. This work aims to indicate factors that influence the feller pig technology performance in the detection and in the accuracy of measurement of the length, width and depth dimensions of the thickness losses on the internal surface of an oil pipeline wall under normal conditions of oil pipe inspection with pig. In this work, is made a collection of factors and an analyses of the technology based on the available literature, as well as an experiment to observe the technology and the factors operating. In the experiment, a feeler pig is used in a pipeline built in carbon steel and in operation that flows petroleum, in witch are observed areas with internal thickness losses occurred naturally. Some of these areas and their dimensions taken by automated ultra-sound scanner are compared with the ones indicated by the feller pig. Based on the data collection, on the analysis and on the experiment, the influence of factors object of this research is discussed. It is concluded that, among these, there are factors related to pipe fabrication tolerances, to wear of pig components, to internal adhesive wear of pipeline, to other pipeline damages and to technology characteristics. Finally, actions are suggested to know better, improve and define the applicability of this technology

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The aim of this study was to determine the response of morphological traits of four tolerant and susceptible sugarcane cultivars (SP81-3250, SP83-2847, RB855453 and RB72454) related to two water regimes. At 84 days after emergence the plants were submitted to water availability treatments (no water deficiency and water deficiency), and evaluated in three periods: zero, 28 and 56 days, after implantation of these treatments (DAT). The cultivars SP81-3250 and SP83-2847, when subjected to water stress for prolonged periods in early development, present higher leaf width, less damage to the green leaf number and leaf area, an increase in stomatal density in adaxial and abaxial leaf surface, and higher production of dry matter, and therefore were considered tolerant. The leaf +3 length not allowed to characterize the varieties to drought tolerance.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Determinou-se a tolerância ao dessecamento de sementes de Archontophoenix alexandrae (Wendl. & Drude) e identificou-se o teste de vigor mais sensível para avaliar a deterioração de sementes nessa espécie. Frutos maduros foram colhidos na coleção de palmeiras do Instituto Agronômico em Campinas. Os frutos despolpados foram transportados em embalagem impermeável para a UNESP em Botucatu, onde as sementes foram secas a diferentes intervalos de tempo. Foram avaliados teor de umidade, germinação, comprimento da plântula e condutividade elétrica. Os resultados sugerem que sementes de A. alexandrae são recalcitrantes, com alta porcentagem de germinação (acima de 67%) quando não desidratadas (47% de umidade). Teores de água inferiores a 31,5% reduziram significativamente a taxa de germinação (<52,5%). Perda total da capacidade germinativa foi observada em sementes com 15,1% de umidade. Dentre os testes de vigor empregados, aquele que avalia a condutividade elétrica da água de embebição foi o mais sensível para a identificação da deterioração da semente em resposta à dessecação progressiva do lote em estudo.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O LMV ocorre em todo o mundo e é considerado um dos patógenos mais importantes para a cultura da alface. de acordo com a habilidade em contornar os genes de resistência mo1¹ e mo1² encontrados em alface, os isolados de LMV podem ser dividos em dois sub-grupos: LMV-Most, capazes de contornar a resistência propiciada por estes genes e de serem transmitidos pela semente nestas cutivares, e LMV-Common, que não são capazes de causar sintomas nestes cultivares, além de serem transmitidos pela semente somente em cultivares suscetíveis. Para avaliar a ocorrência destes dois tipos de isolados de LMV foram coletadas, durante 2002-2005, amostras de alface com sintomas de mosaico em áreas de produção de alface comercial das regiões de Campinas, Mogi das Cruzes e Bauru no estado de São Paulo. O RNA total foi utilizado para detecção por RT-PCR utilizando-se oligonucleotídeos universais para LMV que amplificam a porção N-terminal variável da capa protéica, localizada no terminal 3´do genoma. As amostras positivas foram analisadas por um segundo primer que amplifica um fragmento da região central (CI-VPg) do genoma viral. Um total de 1362 amostras foram avaliadas, tendo sido detectado o LMV em 504 amostras (37,29%). O LMV-Common prevaleceu em variedades suscetíveis (77,3%). O LMV-Most foi encontrado frequentemente associado a variedades portadoras do gene de tolerância mo1¹. Apesar da existência dos LMV-Most capazes de contornar a resistência em alface, estes não predominam em nossa condições.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A cultura do painço é uma opção interessante tanto para a formação de palha para cobertura do solo como para a produção de grãos, pelo seu rápido crescimento, tolerância à seca e ciclo curto. No entanto, são escassas as informações sobre o manejo da adubação nitrogenada para essa cultura. Objetivou-se, neste estudo, avaliar o efeito de doses e épocas de aplicação de nitrogênio em cobertura nas características agronômicas e produtividade de grãos do painço. O delineamento experimental foi o de blocos ao acaso, em esquema fatorial 4x2, constituído pela combinação de quatro doses (0, 30, 60 e 120 kg ha-1 de N) e duas épocas de aplicação (14 e 28 dias após a emergência - DAE) do fertilizante nitrogenado (uréia) em cobertura, com quatro repetições. A adubação nitrogenada em cobertura promoveu aumento na altura da planta, comprimento da panícula e produtividade de grãos da cultura do painço, independentemente da época de aplicação. O número de grãos por panícula foi incrementado pela adubação nitrogenada apenas com a aplicação que foi realizada aos 14 DAE. A aplicação de N em cobertura, aos 14 dias após a emergência, proporcionou acréscimos nas características agronômicas, até a dose de 120 kg ha-1 (maior dose), acarretando aumento da produtividade de grãos do painço.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Availability of good quality water has been reduced vertiginously, over the last decade, in the world. In some regions, the water resources have high concentration of the dissolved salts, these characteristics of the water make it s use impossible. Water quality can be a limitation for irrigated agriculture, principally in regions of arid or semiarid climate where the water resources are generally saline and are exposed at high evaporation ratio. For that reason, precipitation of the salts occurs near the soil surface and those salts themselves cumulate in the vegetal tissue, reducing the soil fertility and crop production. The adoption of tolerant crop to the water salinity and soil salinity, adaptable to the climatic conditions is other emergent necessity. This work had the goal of studying the effects of four salinity levels of the irrigation water salinity and use of mulch, dried leaves of Forest mangrove (Acacia mangiumWilld), in cultivated soil with amaranth (Amaranthus cruentus, BRS Alegria variety), in greenhouse. It was utilized the transplant of plants to PVC columns, containing 30 kg of silty loam soil, 10 days after emerging, with space of 50 x 50 cm between lines. Treatments were composed by combination of four levels of salinity (0.147; 1.500; 3.000 e 4.500 dS m-1), obtained by addition NaCl (commercial) to irrigation water and soil with and without protection, by mulch. A factorial system 4 x 2 was used with four repetitions, totalizing 32 parcels. The concentrations of nutrients in soil solution have been evaluated, in the dry matter of the vegetal tissue (roots, stem, leaves and raceme residue), at the end of the vegetative cycle. The use of soil protection reduced time for the beginning inflorescence of plants, at the same time, the increase of the salinity delayed this phase of amaranth development. The use of the mulch effectively increased the height, stem diameter, area of the larger leaf, humidity and dry matter content and amaranth grain production. The vegetal species showed salinity tolerance to experimented levels. The adopted treatments did not affect the pH values, exchangeable cation contents, electrical conductivity of soil solution (EC1:5) and saturated extract (ECSE), and Ca+2, Mg+, Fe+2 and Mn+2 contents, in the soil solution. The increase of the salinity concentration in the irrigation water inhibited the mineralization process of the organic matter (OM) and, consequently, the efficiency in the it´s utilization by plants, at the same time, produced increase in the values of the exchangeable sodium percentage (ESP), sodium adsorption ratio (SAR) and potassium adsorption ratio (PAR), in the soil solution. Therefore, the use of the mulch did not affect the first three parameters. The protein and nutrient contents: K+, Ca+2, P, Mg+2 e Cu+2, in amaranth grains, were improved by tillage condition. The raceme residues showed chemical/nutritional composition that makes advantageous its application in animal ration. In this context, it follows that amaranth tolerate the saline stress, of the irrigation water, until 4.500 dS m-1, temperature and relative humidity of the air predominant in the experimental environment

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

As estatinas são utilizadas no tratamento das dislipidemias, com grande tolerância; no entanto, vários efeitos colaterais podem surgir, destacando-se miopatia. A prática regular do exercício físico (EF) produz modificações favoráveis no perfil lipídico; entretanto, pode gerar lesões musculares. OBJETIVO: Avaliar o efeito da associação entre exercício físico e estatinas na função muscular, pela análise histológica, em modelo experimental animal com dislipidemia. MÉTODOS: Foram utilizados 80 ratos machos Wistar, distribuídos em oito grupos, incluindo animais submetidos à dieta hipercolesterolêmica (DH), sinvastatina com (G1) e sem (G2) EF; DH e fluvastatina, com (G3) e sem EF (G4); alimentados com ração comercial (RC) na presença (G5) e ausência de (G6) EF; DH submetidos (G7) ou não (G8) a EF. A DH foi administrada por 90 dias, as estatinas e prática de EF em esteira rolante por oito semanas. Os animais foram sacrificados, e o músculo sóleo retirado para análise histológica. Aplicaram-se os testes t de Student pareado e análise multivariada, com nível significante para p < 0,05. RESULTADOS: As principais alterações histológicas encontradas foram fibras de diferentes diâmetros, atróficas, em degeneração, splitting, edema, infiltrado inflamatório. Essas alterações foram observadas em 90% dos animais do grupo G1, 80% do G2, 70% do G3, 30% do G4, 40% do G5 e 30% do G7. Nos grupos G6 e G8 identificaram-se fibras musculares com morfologia preservada. CONCLUSÕES: Na avaliação histológica muscular, a associação entre fluvastatina, sinvastatina e exercício físico acarreta alterações morfológicas com predomínio no uso da sinvastatina, variando de grau leve a grave, no músculo sóleo de ratos, induzidos pelos inibidores da HMG-CoA redutase.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

INTRODUCTION: Cardiac and pulmonary manifestations of the Chagas disease (CD) affect between 20-30% of the infected subjects. The chronic Chagas cardiomyopathy (CCC) has some peculiarities such as arrhythmias and, especially heart failure (HF) and is potentially lethal due to left ventricular dysfunction. How respiratory disorders, patients get progressive loss of functional capacity, which contributes to a poor quality of life related to disease. Measurements of lung volume by the movement of the chest wall surface are an alternative evaluation of lung function and kinematics of complex thoracoabdominal for these patients. OBJECTIVE: evaluate the kinematics of the thoracoabdominal complex through the regional pulmonary volumes and to correlate with functional evaluation of the cardiorrespiratory system in patients with Chagas disease at rest. MATERIALS AND METHODS: a cross-section study with 42 subjects had been divided in 3 groups, 15 composed for patients with CCC, 12 patients with HF of different etiologies and 15 healthful presented control group. An optoelectronic plethysmography (POE), Minnesota questionnaire, six minute walk test, spirometer and manovacuometer was used. RESULTS: It was observed in the 6MWT where group CRL presented greater distance 464,93±44,63m versus Group HF with 399,58± 32,1m (p=0,005) and group CCC 404±68,24m (p=0,015), both the groups presented difference statistics with regard to Group CRL. In the manovacuometer 54,59±19,98; of the group CCC and 42,11±13,52 of group IC found group CRL presented 81,31±15,25 of the predicted versus, presenting in relation to group CRL. In the POE it observed a major contribution in abdominal compartment in patients with IC if compared like CCC and control groups. On the basis of the questionnaire of quality of life of Minessota, verified a low one groups CCC and IC 43,2±15,2 and 44,4±13,1, respectively (p<0,05) when compared with the control group (19,6±17,31). CONCLUSION: it seems that the patients with CCC possess same functional and respiratory characteristics, observed for the POE, 6MWT, manovacuometer and spirometer to the patients of group HF, being able to consider similar interventions for this complementary group as therapeutical of this neglected disease

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The rationalization of work in the Dentistry has been taking the professional to work for ways and systems based in the ergonomics, turning their work efficient and less tiring. Since their academic formation, the dentists surgeons are concerned with the high productivity in clinic and with the final result of the work, neglecting the way as it is executed, which reduce their work capacity and exhibits them to occupational diseases that could be minimized and/or forewarned. This research had as the main objective to investigate the knowledge of the Dentistry academics of Rio Grande do Norte Federal University concerning the Noise-induced Hearing Loss (NIHL), relating them at the noise levels that they are exposed, as well as to the preventive measures taken during the clinical activities. Was observed that 95% of the individuals know that the dentist surgeon is a professional in risk for NIHL. Among the causes of NIHL, the one that obtained the largest frequency citation was the high-speed handpieces, reminded by 92,4% of the academics. Among the students which enumerated protective measures for NIHL, 92% mentioned the use of the ear plugs, although 97% of the researched have told do not use any kind of preventive measure related to the noise. Was also observed that 96% of the academics notice the noise during the clinical attendance, what inconvenience 28,1% of them. Related the noise levels, the high-speed handpieces of the academics presented a medium value of 80,5 dB varying from 72,3 to 88,3 dB. The average of the ambient noise observed at the Integrated Clinic was about 74,8 dB. In spite of the noise levels in this research were observed below the established limits of tolerance by the legislation, they can provoke damages to the Dentistry professionals' health, or that suggests the need of an intervention and use of immediate preventive measures able to generate a healthy atmosphere of work and less risky

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A tendência mundial é o aumento da produtividade e da produção de peças cada vez mais sofisticadas, com elevado grau de tolerância geométrica, dimensional, com bom acabamento superficial, com baixo custo. A retificação é responsável pelo acabamento final no processo de usinagem de um material. No entanto, danos gerados nesta fase de produção comprometem todos os recursos utilizados nas fases anteriores. Grande parte dos problemas ocorridos na retificação deve-se à enorme temperatura gerada pelo processo devido às condições de usinagem. Atribui-se à velocidade de avanço, que está diretamente relacionada com a produtividade, os danos ocorridos na retificação, ficando esta variável limitada até valores que não proporcione danos. Neste trabalho, através da variação da velocidade de avanço no processo de retificação cilíndrica externa do aço ABNT D6, racionalizando a aplicação de dois fluidos de corte e usando um rebolo superabrasivo de CBN (nitreto de boro cúbico) com ligante vitrificado, avaliou-se a influência da velocidade de avanço nos danos superficiais de aços endurecidos. Os resultados permitiram concluir que a velocidade de avanço associada a uma eficiente refrigeração e lubrificação, não provocou danos térmicos (queima, trincas, tensões de tração) ao material. Tensões residuais e a rugosidade do material retificado apresentaram uma correlação com as condições de usinagem. O trabalho concluiu ser capaz um aumento dos índices de produtividade sem provocar danos nos componentes retificados.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

One of the largest problems of the present time resulting from the economic globalization and the modern technology, of the point of view of the biological rhytms of our organism, it is offering services and production of goods available in 24 o'clock, that it demands organized workers in several work schedules besides the hours of the day. Those schedules cause a series of biopsychosocial consequences in the worker's health, in function of circadian, homeostatic and psychosocial alterations. Accordingly, the aim of this study was to accomplish an evaluation of the effects of several works schedules in the pattern of the sleep wake cycle, anxiety, stress and in the health. We counted with a sample of 274 workers subdivided in 49 daytime worker groups and 225 workers in different shift work schedules with different speeds (rotating shift group, slower day shift group, faster day shift group). From the results analysis it is verified irregularities of the daily activities, stress and alterations in the workers' health in all schedules. It was also verified thata the workers thata presented irregularities in the daily activities were the mroe stressed. On the other hand, the shift works were considered more ansious and associated with bad sleep quality. It was verified that the workers with bad sleep quality were those presented larger levels of dispocional anxiety. There was no statistically significant correlation between bad sleep quality and irregular daily lifestyle. However, it can be affirmed thata shift work schendules doesn't are the main determinant for the circadian alterations, but the answers of the individuals to the shifts work; and that the inadequate behavioural strategies to work with the effects of the shift schedules. In conclusion, individual strategies related to the coping of the work in shift (adaptation and tolerance) should be extolled as indispensable tool in the ergonomic evaluation of the work

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fibromyalgia (FM) is a non-inflammatory rheumatic syndrome of unknown etiology, with symptoms of diffuse musculoskeletal pain and presence of specific anatomic sites called tender points. The symptoms are often associated with fatigue, sleep disturbances, morning stiffness, alterations in pain perception, anxiety and depression. Fibromyalgia exhibits a correlation between physical and behavioral symptoms, which have a negative influence on the quality of life of patients. Emotional skills are important factors since they are related to subjective well-being, personal productivity, social interaction and interpersonal relationships. We aim to describe the physical and psychosocial interactions in women with FM, showing the association between perceived social support and affect with symptoms of pain, functionality and mood. We will also describe a body representation of pain in women with FM. Data were collected over 3 years and the sample size ranged between studies. This is an exploratory cross-sectional study conducted with a convenience sample of 63 women with FM and 42 healthy women as a control group (CT), aged 20-76 years, recruited through spontaneous demand at Onofre Lopes University Hospital (HUOL) and the Clinical School of Physiotherapy of Universidade Potiguar (UNP). The Fibromyalgia Impact Questionnaire (FIQ), Beck Depression Inventory (BDI), Social Support Scale (MOS), Hamilton Anxiety Scale and Scale of Positive and Negative Affect Schedule (PANAS), in addition to pressure algometry were used. For data analysis, we used parametric and non-parametric tests and a general linear model with adjustment variables and analysis of variance. A significant difference was found between pain threshold and tolerance, functionality, depression, anxiety, social support, and positive and negative affect between the groups. Affective states and social support were associated with anxiety, depression and functionality. A body was drawn representing pain with higher incidences in trapeze, supraspinatus and second ribs. The reason for studying sensory aspects, affective behavior and social support in FM patients opens perspectives for scientific and clinical research of this syndrome. Women with chronic pain such as FM appear to have altered mood states, less social support and affective dysfunctions, influencing the other symptoms of the syndrome

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fibromyalgia (FM) is a non-inflammatory rheumatic syndrome characterized by widespread musculoskeletal pain with palpable tender points, muscle stiffness, fatigue, and sleep disturbances. Patients with FM have hormonal changes that are directly correlated with symptoms of the syndrome. The neuroendocrine regulation may be impaired, with abnormalities in the hypothalamus-pituitary-adrenal (HPA) axis with various hormones showing changes in their levels. In women in fertile period, various gonadal hormones are associated with symptoms of the syndrome, but studies focusing only a population of women in post-menopausal period who do not use hormone replacement are rare. We developed an analytical cross sectional study to assess the plasma levels of cortisol and dehidroepiandrosterona sulfate (DHEA-S) with quimioluminescence method in a group of 17 women with FM and 19 healthy women in post-menopause who do not use hormone replacement and observe the correlation with the symptoms of pain through algometry, depression and physical functional capacity measured from the Beck Depression Index (BDI) and the Fibromyalgia Impact Questionnaire (FIQ). Three blood samples were collected in the morning (between 8:00 9:30) with an interval of 24 hours for the measurements of hormonal levels and biochemical profile. There were no immunological or lipid changes in patients with FM. Comparing the two groups, there is no difference in levels of cortisol and a tangential effect for DHEA-S (p=0,094) with the lowest levels in the FM. DHEA-S also correlated with pain threshold (r=0,7) and tolerance (r=0,65) in group FM. We found the presence of depressive state and low physical functional capacity in FM. It was also evident that women in post-menopausal period, DHEA-S should influence the symptoms of increased sensitivity to pain, but not the presence of depressive status and low physical functional