Length-weight studies of Epinephelus chlorostigma and E. areolatus from Arabian Gulf

Regression coefficient value (b) of the length-weight relation of Epinephelus chlorostigma was registered as 2.6383, which is significantly (p<0.01) less than the hypothetical value (3). This coefficient of E. areolatus was registered as 2.9500, a value close to 3. The correlation coefficients (r) were registered as 0.9725 and 0.9837 for E. chlorostigma and E. areolatus, respectively, which show a good relationship between the two parameters.

A comparison of different failure assessment methodologies applied to the NESC-1 test

Predictions for a 75x205mm surface semi-elliptic defect in the NESC-1 spinning cylinder test have been made using BS PD 6493:1991, the R6 procedure, non-linear cracked body finite element analysis techniques and the local approach to fracture. All the techniques agree in predicting ductile tearing near the inner surface of the cylinder followed by cleavage initiation. However they differ in the amount of ductile tearing, and the exact location and time of any cleavage event. The amount of ductile tearing decreases with increasing sophistication in the analysis, due to the drop in peak crack driving force and more explicit consideration of constraint effects. The local approach predicts a high probability of cleavage in both HAZ and base material after 190s, while the other predictions suggest that cleavage is unlikely in the HAZ due to constraint loss, but likely in the underlying base material. The timing of this event varies from ∼150s for R6 predictions to ∼250-300s using non-linear cracked body analysis.

Distribution and length-weight relationship of tunas and tuna-like fishes around Ceylon

Tunas and tuna-like fishes have contributed considerably towards the increase in fish production from Ceylon's coastal waters, during the last five years and in this blood fish group lies a potential resource for a further increase in production. Consequently considerable attention is being paid to the study of these species. Length frequency sampling of these species are being carried out and quite often it becomes necessary to convert catch in terms of weight to catch in terms of number, when estimating apparent abundance of the stock. The length-weight relationship in addition to its usefulness in converting length frequency data to weight frequency data for such purpose is of general value to biologists and even to fishermen. The six species studied are yellowfin tuna (Thunnus alacares, Bonneterre), skipjack tuna (Katsuwonus pelamis, Linnaeus), mackerel tuna (Buthynnus affinis, Cantor), frigate mackerel (narrow corseleted Auxis thazard, Lacepede and broad corseleted A. rochie, Risso) and bonito (Saida orientalis, T&S).

Fabrication of test structures for 4×4 InP/InGaAsP integrated optical matrix

A novel optical switching matrix measuring 1×2 mm2 in size is fabricated. The switching matrix is composed of waveguides, four 1×4 multimode interference (MMI) splitters, 32 total internal refraction mirrors and four 4×1 MMI combiners with the extremely compact size of 1×2 mm2. This integrated device are assessed and loss contribution measured from test structure is presented.

An investigation into the residual stresses in an aluminium 2024 test weld

This paper uses finite element (FE) analysis to examine the residual stresses generated during the TIG welding of aluminium aerospace alloys. It also looks at whether such an approach could be useful for evaluating the effectiveness of various residual stress control techniques. However, such simulations cannot be founded in a vacuum. They require accurate measurements to refine and validate them. The unique aspect of this work is that two powerful engineering techniques are combined: FE modelling and neutron diffraction. Weld trials were performed and the direct measurement of residual strain made using the ENGIN neutron diffraction strain scanning facility. The predicted results show an excellent agreement with experimental values. Finally this model is used to simulate a weld made using a "Low Stress No Distortion" (LSND) technique. Although the stress reduction predicted is only moderate, the study suggests the approach to be a quick and efficient means of optimising such techniques.

The development of aerodynamic performance measurements in a transient test facility

Transient test facilities offer the potential for the simultaneous study of turbine aerodynamic performance, unsteady flow phenomena and the heat transfer characteristics of a turbine stage. This paper describes the development of aerodynamic performance measurement techniques in the Oxford Rotor Facility (ORF). The solutions to the technological issues involved with transient testing presented in this paper are expected to achieve levels of precision uncertainty comparable with traditional steady flow test rigs. The theoretical background to the measurement of aerodynamic performance is presented together with a comprehensive pre-test uncertainty analysis. The instrumentation scheme for the measurement of stage mass flow rate is discussed in detail, the measurements of shaft power, total inlet enthalpy, and stage pressure ratio are also outlined. The current working section features a 62% scale, 1-1/2 stage, high-pressure shroudless transonic turbine. The required inlet flow conditions are provided by an Isentropic Light Piston Tunnel (ILPT) with a quasi-steady state run time of approximately 70ms. The testing is conducted at engine representative specific speed, pressure ratio, gas-to-wall temperature ratio, Mach number and Reynolds number.

Use of length-weight relationship in grading processed beche-de-mer

Holothurians, belonging to the species Holothuria scabra, have been collected by diver-fishermen and processed for export. There is an active fishery for these animals in Palk Bay and Gulf of Mannar, off the north-western coast of Sri Lanka. The absence of standardized method of grading has led to unwarranted variation in sale prices and sometimes in loss of foreign exchange in Sri Lanka. In this paper an attempt is made to present a method to grade processed beche-de-mer by using the lenght-weight relationship.

Morphometry and length-weight relationship of Coilia dussumieri, Valenciennes, 1848 from Mumbai waters

Coilia dussumieri Valenciennes, 1848 a component of 'dol' net fishery forms an important pelagic resource along northwest coast of India. The present communication deals with morphometry and length-weight relationship of this species along Mumbai coast. Morphometric study showed a positive correlation among the compared characters. The length-weight relationship for the species from Mumbai coast was found to be W=0.017L super(2.4223).

Studies on fecundity of Puntius sarana (Ham.) in relation to total length, total weight and ovary weight

A total of 43 mature female of Puntius sarana (Ham.) ranging from 204 mm to 320 mm in length and 102 to 482 g in weight were used for present studies. The relationship between fecundity with respect to total length (TL), total weight (TW) and ovary weight (OW) was found to be linear. The coefficient of co-relation 'r' of the above relationships was found to be 0.5947, 0.5761 and 0.9837 respectively. All these values are highly significant (P=0.01) indicating a close relationship between these parameters. However, as indicated by value of 'r' (0.9837), the fecundity is more closely related to ovary weight and hence the ovary weight may be a better index of fecundity than the total length or weight.

Effect of lykamin on growth and biochemical composition of long whiskered catfish, Mystus gulio (Hamilton) fingerlings under laboratory conditions

A growth trial was conducted to test the effect of Lykamin (dietary supplement) on growth, survival and feed conversion in Mystus gulio. Four isoproteic diets were formulated by incorporating the growth promoter, Lykamin at the levels of 0, 0.25, 0.50 and 0.75% diet. The crude protein content was 30% in each diet. The diets were fed to triplicate groups of catfish fingerlings twice daily at a level of 5% of the total body weight for 120 days. Regular fortnightly sampling was done to evaluate the growth performance of the experimental animals. Water quality parameters during the experimental period were maintained within the range suitable for catfish. The results showed better specific growth rate, weight gain, protein efficiency ratio and feed conversion ratio in the group which was given 0.75% Lykamin diet.

Morphometry, length-weight relationship and biology of Sepia aculeata (d'Orbigny, 1848) from Mumbai coast, India

Seventeen morphometric characters of Sepia aculeata of Mumbai coast have been studied and the relationships of morphometric characters with dorsal mantle length (DML) were established. The characters compared showed a fair to high degree of correlation ('r' 0.63-0.99). Number of arm suckers and shell rings were related with DML. The shell rings also showed high degree of correlation with DML ('r' 0.79-0.95). However, the relationship between arm suckers and DML was not so good ('r' 0.1-0.4). The length-weight relationship is described as W=0.1821336 L sub(2.801102). Food and feeding analysis confirm the carnivorous feeding behaviour of the species. Mature females found in all months indicate that it has prolonged spawning season with two peaks, september and march-april. Absolute fecundity ranged from 214 to 4143 eggs.

Studies on fecundity of Rita pavimentata (Gunther) in relation to total length, total weight and ovary weight

A total of thirty eight ripe ovaries from the specimens of Rita pavimentata, measuring 230 to 355 mm in total length (TL) and 250 to 750 g in total weight (TW), were selected to study the fecundity. The relationship between fecundity 'and total length (TL), total weight (TW) and ovary weight (OW) was found to be linear. The coefficient of co-relation 'r' of the above relationship was found to be 0.92, 0.94 and 0.96 respectively. All these values are highly significant (P=0.01) indicating a close relationship between compared parameters. However, as indicated by value of 'r' (0.96), the fecundity is more closely related to ovary weight and hence the ovary weight may be a better index of fecundity than the total body length or weight.

Contrasting high-resolution characteristic shock-capturing methods in aeroacoustic test problems

Two shock-capturing methods are considered. One is based on a standard conservative Roe scheme with van Leer's MUSCL variable extrapolation method applied to characteristic variables and a Runge-Kutta time stepping scheme. The other is based on the novel CABARET space-time scheme, which uses two sets of staggered variables, one for the conservation step and the other for characteristic splitting into local Riemann invariants. The methods are compared in a range of 2-D inviscid compressible flow test cases. Copyright © 2008 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.

Determination of length-weight relationship of squid (Loligo duvauceli) found along Pakistan coast

Common squid (Loligo duvauceli) is caught as by-catch of shrimp trawlers in shallow coastal. waters off Pakistan. Size frequency data of squid for sexes combined collected from Karachi Fish Harbour were analyzed. The length-weight relationship of the form W = a.L b was determined and to mean length of squid sample measured compared with mean length derived from inverse equation was tested for any significant differences, none were observed and it was inferred that the equation W = 0.243xL 2.2424 describe the relationship.

Development of low cost feed using local ingredients for culture of freshwater prawn, Macrobrachium rosenbergii in ponds

Two experiments were conducted to formulate and evaluate test diets using locally available ingredients to find out suitable diets for mono and polyculture of Macrobrachium rosenbergii in ponds. The first experiment was conducted from 1 July 2003 to 29 September 2003 in 12 experimental ponds each measuring 30 square meters behind the Fisheries Faculty Building, BAU campus, Mymensingh. Three experimental diets containing 30% protein were formulated using fish meal, meat and bone meal, mustard oilcake, sesame meal and rice bran and assigned to treatments 1, 2 and 3, respectively. A special shrimp feed (Starter-II) from Saudi-Bangla Fish Feed Ltd. was assigned to treatment 4 (Control). Each treatment had three replications. Juveniles of M. rosenbergii (2.90±0.81g) were stocked at the rate of 4/square meter. Prawns were fed three times daily at the rate of 15% of their body weight at the beginning, which was gradually reduced to 10% and 5% for the last two months. There was no significant (P>0.05) difference between the weight gains of prawns fed diets 1 and 4 (control), but they were significantly (P<0.05) higher than those of diets 2 and 3. The FCR values of diets ranged between 2.61 to 3.36 with diets 1 and 4 showing significantly (P<0.05) lower FCR values. The survival rate of prawns ranged between 68 to 78% with prawns fed diets 1 and 4 showing significantly higher survival rate. The production of prawn ranged from 921 to 1,428 kg/ha/90 days and diet 1 gave the highest production. Treatment 1 gave the highest net profit ofTk. 161,980/ha/90 days. The second experiment was conducted from December, 2003 to April, 2004 to see the growth of over wintered M. rosenbergii juveniles in polyculture with indigenous major carps (catla and rohu) in ponds using formulated diets. Three isoenergetic experimental diets formulated using fish meal, meat and bone meal, mustard oil cake, rice bran, wheat bran and molasses, and a shrimp feed 'Golda special feed' from Saudi-Bangla Fish Feed Ltd. were assigned to treatments 1, 2, 3 and 4 (control), respectively, each treatment had two replications. Eight experimental ponds each measuring 80 square meters in the Field Laboratory Complex of the Faculty of Fisheries, BAU campus, Mymensingh were used. The mean initial weights of M. rosenbergii, catla and rohu were 1.60±0.01, 30.0±0.09 and 25.0±0.08 g, respectively. A total of 160 fish and prawn (20,000/ha) were stocked in each pond at the ratio of 2:1:1 (prawn: catla: rohu). Fish were fed at the rate of 3-5% of their body weight. Prawns fed diet 1, 2 and 4 showed higher weight gains compared to diet 3. The weight gain of catla was significantly higher in T1 while in case of rohu was higher in T1 and T4, respectively. There were no significant differences (P>0.05) in the survival rate of fish as obtained from different treatments. The overall total fish production ranged from 2196 to 2679 kg/ha/5 months. The highest production and the highest profit (Tk. 56,531/ha/5 months) was obtained from T1 and the lowest (Tk. 24,932/ha/5 months) from T4.