Quality of Life and Colorectal Cancer: a Review

Objectives: To describe what is known of quality of life for colorectal cancer patients, to review what has been done in the Australian setting and to identify emerging directions for future research to address current gaps in knowledge. Method: A literature search (using Medline, PsychInfo, CINAHL and Sociological Abstracts) was conducted and 41 articles identified for review. Results: Three key areas relating to quality of life in colorectal cancer patients emerged from the literature review: the definition and measurement of quality of life; predictors of quality of life; and the relationship of quality of life to survival. Results of existing studies are inconsistent in relation to quality of life over time and its relationship to survival. Small sample sizes and methodological limitations make interpretation difficult. Conclusions: There is a need for large-scale, longitudinal, population-based studies describing the quality of life experienced by colorectal cancer patients and its determinants. Measurement and simultaneous adjustment for potential confounding factors would productively advance knowledge in this area, as would an analysis of the economic cost of morbidity to the community and an assessment of the cost effectiveness of proposed interventions. Implications: As the Australian population ages, the prevalence of colorectal cancer within the community will increase. This burden of disease presents as a priority area for public health research. An improved understanding of quality of life and its predictors will inform the development and design of supportive interventions for those affected by the disease.

Quality of life assessment in the community-dwelling elderly: Validation of the Assessment of Quality of Life (AQoL) Instrument and comparison with the SF-36

Measurement of Health-Related Quality of Life (HRQoL) of the elderly requires instruments with demonstrated sensitivity, reliability, and validity, particularly with the increasing proportion of older people entering the health care system. This article reports the psychometric properties of the 12-item Assessment of Quality of Life (AQoL) instrument in chronically ill community-dwelling elderly people with an 18-month follow-up. Comparator instruments included the SF-36 and the OARS. Construct validity of the AQoL was strong when examined via factor analysis and convergent and divergent validity against other scales. Receiver Operator Characteristic (ROC) curve analyses and relative efficiency estimates indicated the AQoL is sensitive, responsive, and had the strongest predicative validity for nursing home entry. It was also sensitive to economic prediction over the follow-up. Given these robust psychometric properties and the brevity of the scale, AQoL appears to be a suitable instrument for epidemiologic studies where HRQoL and utility data are required from elderly populations. (C) 2003 Elsevier Science Inc. All rights reserved.

The effect of pretreatments on the drying rate and quality of dried bananas

The effects that four pretreatments (blanching, chilling, freezing, and combined blanching and freezing), used prior to drying, had on the drying rate and quality of bananas were investigated. An untreated sample was used as a control. The bananas were dried at 50 degreesC in a heat pump dehumidifier dryer, using an air velocity of 3.1 m s(-1), until a final moisture content of approximately 25% dry weight basis was attained. While the initial drying rate was highest for the blanched treatment, the two pretreatments involving freezing resulted in the shortest drying times. The blanched sample was most preferred in terms of colour while the frozen samples exhibited extensive browning. The texture and flavour was significantly (P < 0.05) reduced in all samples that involved blanching and/or freezing.

On measuring quality of a probabilistic commodity forecast for a system that incorporates seasonal climate forecasts

Regional commodity forecasts are being used increasingly in agricultural industries to enhance their risk management and decision-making processes. These commodity forecasts are probabilistic in nature and are often integrated with a seasonal climate forecast system. The climate forecast system is based on a subset of analogue years drawn from the full climatological distribution. In this study we sought to measure forecast quality for such an integrated system. We investigated the quality of a commodity (i.e. wheat and sugar) forecast based on a subset of analogue years in relation to a standard reference forecast based on the full climatological set. We derived three key dimensions of forecast quality for such probabilistic forecasts: reliability, distribution shift, and change in dispersion. A measure of reliability was required to ensure no bias in the forecast distribution. This was assessed via the slope of the reliability plot, which was derived from examination of probability levels of forecasts and associated frequencies of realizations. The other two dimensions related to changes in features of the forecast distribution relative to the reference distribution. The relationship of 13 published accuracy/skill measures to these dimensions of forecast quality was assessed using principal component analysis in case studies of commodity forecasting using seasonal climate forecasting for the wheat and sugar industries in Australia. There were two orthogonal dimensions of forecast quality: one associated with distribution shift relative to the reference distribution and the other associated with relative distribution dispersion. Although the conventional quality measures aligned with these dimensions, none measured both adequately. We conclude that a multi-dimensional approach to assessment of forecast quality is required and that simple measures of reliability, distribution shift, and change in dispersion provide a means for such assessment. The analysis presented was also relevant to measuring quality of probabilistic seasonal climate forecasting systems. The importance of retaining a focus on the probabilistic nature of the forecast and avoiding simplifying, but erroneous, distortions was discussed in relation to applying this new forecast quality assessment paradigm to seasonal climate forecasts. Copyright (K) 2003 Royal Meteorological Society.

Comparative study of the radiation-induced grafting of styrene onto poly(tetrafluoroethylene-co-perfluoropropylvinyl ether) and polypropylene substrates. I: Kinetics and structural investigation

A comparative study has been made of the radiation grafting of styrene onto poly(tetrafluoroethylene-co-perfluoropropyl vinyl ether) (PFA) and polypropylene (PP) substrates, using the simultaneous irradiation method. Effects of grafting conditions such as monomer concentrations, type of solvent, dose rate and irradiation dose on the grafting yield were investigated. Under the same grafting conditions it was found that a higher degree of grafting of styrene was obtained using a mixture of dichloromethane/methanol solvents for PFA and methanol for PP and the degree of grafting was higher in PP than in PFA at all doses. However, the micro-Raman spectroscopy analysis of the graft revealed that, for the same degree of grafting, the penetration depth of the grafted polystyrene into the substrate was higher in PFA than in PP substrates. In both polymers the crystallinity was hardly affected by the grafting process and the degree of crystallinity decreased slightly with grafting dose. The dependence of the initial rate of grafting on the dose rate and the monomer concentration was found to be 0.6 and 1.4 order for PFA and 0.15 and 2.2 for PP, respectively. The degree of grafting increased with increasing radiation dose in both polymers. However, the grafting yield decreased with an increase in the dose rate. The increase in the overall grafting yield for PFA and PP was accompanied by a proportional increase in the penetration depth of the graft into the substrates. (C) 2003 Society of Chemical Industry.

A study of the radiation degradation of styrene/alkane and α-methylstyrene/alkane copolymers

The effects of copolymer composition and microstructure on the radiation chemistry of styrene/alkane and alpha-methylstyrene/alkane copolymers have been studied. The primary radical species formed on radiolysis of the copolymers at 77 K, and identified by ESR spectroscopy, are the same as those formed during radiolysis of the homopolymers. The yields of radicals for the copolymer are as predicted assuming that the cross-section is proportional to the electron density of each component; however, there is some evidence of radical migration to aromatic groups at 77 K. Changes in molecular structure on irradiation were detected by using C-13 NMR spectroscopy. Evidence of the consumption of terminal double bonds, and chain scission in alpha-methylstyrene/alkane copolymers was found. Measurements of viscosity supported the mechanism of cross-linking predominating in styrene/alkane copolymers, while in alpha-methylstyrene/alkane copolymers chain scission was the major result of irradiation. (C) 2003 Society of Chemical Industry.

A study of the radiation chemistry of poly(chlorotrifluoroethylene) by ESR spectroscopy

The ESR spectra of poly(chlorotrifluoroethylene) were recorded following gamma-radiolysis under vacuum at room temperature and 77 K. The very broad spectrum at 77 K revealed little fine structure with which to identity the radicals formed upon irradiation, but subsequent photobleaching and annealing studies, together with radiolytic studies at higher temperatures, afforded scope for making radical assignments. Both main-chain radicals and a range of chain-end radicals have been identified. The G-values for radical formation were 1.55, 0.36 and 0.32 at 77 K, 273 K and room temperature, respectively. (C) 2003 Elsevier Science Ltd. All rights reserved.

High energy radiation grafting of fluoropolymers

Fluoropolymers are known as chemically inert materials with good high temperature resistance, so they are often the materials of choice for harsh chemical environments. These properties arise because the carbon-fluorine bond is the strongest of all bonds between other elements and carbon, and, because of their large size, fluorine atoms can protect the carbon backbone of polymers such as poly(tetrafluoroethylene), PTFE, from chemical attack. However, while the carbon-fluorine bond is much stronger than the carbon hydrogen bond, the G values for radical formation on high energy radiolysis of fluoropolymers are roughly comparable to those of their protonated counterparts. Thus, efficient high energy radiation grafting of fluoropolymers is practical, and this process can be used to modify either the surface or bulk properties of a fluoropolymer. Indeed, radiation grafted fluoropolymers are currently being used as separation membranes for fuel cells, hydrophilic filtration membranes and matrix substrate materials for use in combinatorial chemistry. Herein we present a review of recent studies of the high energy radiation grafting of fluoropolymers and of the analytical methods available to characterize the grafts. (C) 2003 Elsevier Ltd. All rights reserved.

Utiliza????o do QFD: Quality Function Deployment como ferramenta de planejamento

A utiliza????o da matriz do QFD (em portugu??s, Desdobramento da Fun????o Qualidade) como entrada para o planejamento estrat??gico regional solidificou o entendimento da Diretoria Regional sobre as expectativas dos clientes ante seus principais processos, avaliados por meio de pesquisa externa realizada bianualmente. Direcionou as a????es a serem tomadas por meio da prioriza????o, da tradu????o e do desdobramento dos requisitos mais importantes para os clientes em todos os n??veis dos processos, alinhando essas a????es com as estrat??gias, a pol??tica da qualidade e o or??amento. Da mesma forma, serviu para estabelecer metas globais de satisfa????o por segmento, de forma mais estruturada, sistematizando a avalia????o dos resultados e focando sempre a satisfa????o dos clientes cujos resultados j?? se comprovaram: ??ndice de 8,6 em 2000 para 9,2 em 2004

Estudo morfofisiológico e anatômico de dois genótipos de cacaueiro (Theobroma cacao L.) submetidos a diferentes condições de radiação solar

A luminosidade desponta como um dos fatores abióticos de maior importância no estabelecimento das plantas, podendo ocasionar alterações a nível fisiológico e anatômico, interferindo diretamente no desenvolvimento das mesmas e consequentemente, sua produtividade. O cacaueiro (Theobroma cacao – Malvaceae) possui grande interesse econômico devido à utilização de suas sementes para produção de manteiga de cacau e chocolate. Neste sentido, o objetivo deste trabalho foi comparar características fisiológicas e anatômicas de dois genótipos de cacaueiro (PH 16 e IPIRANGA 01), submetidos a diferentes condições de radiação solar de modo a inferir a respeito das condições de luminosidade mais favoráveis ao desenvolvimento dos mesmos. Foram realizadas análises de crescimento, teor de pigmentos, trocas gasosas e anatômicas caulinares e foliares. O delineamento experimental foi em Blocos casualizados (DBC), com 4 repetições em arranjo fatorial 2 x 5, constituído de dois genótipos e 5 níveis de luminosidade (0% - pleno sol -, 18%, 30%, 50% e 80% de sombreamento), totalizando 40 parcelas com 10 plantas cada. Os dados obtidos foram submetidos à análise de variância e regressão. Os resultados de crescimento indicam maior adaptação, de ambos os genótipos, em condições de irradiância alta a moderada. O índice de qualidade de Dickson demonstrou maior capacidade de sobrevivência em condições de campo a níveis altos de irradiância para o genótipo PH 16 e a níveis de irradiância moderada para IPIRANGA 01. Os teores de pigmentos fotossintetizantes de IPIRANGA 01 mostram-se mais elevados na condição de 30% de sombreamento, enquanto que, para PH 16 os maiores teores foram observados em 50% de sombreamento. Ambos os genótipos demonstraram altas taxas de A, Ci, E, A/E, A/Gs e A/Ci, sob elevadas irradiâncias, assim como adaptações anatômicas caulinares e foliares a maiores luminosidades, tais como, maior espessamento do limbo foliar, parênquima paliçádico, esponjoso, limbo foliar, epiderme adaxial e densidade estomática, além de maior densidade e frequência de elementos de vaso e espessura do xilema secundário. Os genótipos PH 16 e IPIRANGA 01 apresentaram uma grande plasticidade em relação aos diferentes níveis de irradiância, no entanto, constatou-se que PH 16 apresentou melhor desempenho sob condições de alta irradiância, como as obtidas nos tratamentos a pleno sol e 18% de sombreamento, enquanto que, IPIRANGA 01 mostrou-se mais adaptado sob sombreamento moderado, a 30% de sombra.

Caracterização físico química, perfil sensorial e aceitação de morangos submetidos à irradiação

A irradiação de alimentos é um método de conservação não térmico utilizado em diferentes alimentos e em diferentes doses. Sabe-se que, dependendo da dose aplicada, esse método pode ocasionar alterações nas características físico-químicas e sensoriais, que afetam a qualidade do produto. Portanto, um dos objetivos deste estudo foi analisar o efeito da irradiação nas características físico-químicas e sensoriais de morangos irradiados. A irradiação das amostras de morango ocorreu um dia após a colheita e foi realizada no Laboratório de Radiação Gama do Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), em Belo Horizonte-MG. As doses utilizadas foram 1 kGy, 2 kGy, 3 kGy e 4 kGy e a amostra controle (0 kGy). Foram avaliados pH, acidez total titulável, sólidos solúveis, ratio (relação entre teor de sólidos solúveis e acidez total titulável), açúcares redutores, totais e não redutores, pectina, ácido ascórbico, firmeza, cor, antocianinas, compostos fenólicos e capacidade antioxidante. Para a caracterização sensorial das amostras, foi utilizado o método Perfil Descritivo Otimizado (PDO), sendo avaliados os atributos sensoriais cor, sabor adocicado, gosto ácido, firmeza e suculência, por 15 julgadores previamente selecionados. Além da caracterização sensorial, foi realizada a análise de aceitação sensorial por 60 consumidores de morango em duas sessões. A irradiação não alterou significativamente a maioria das características físico-químicas analisadas, ao comparar todas as doses empregadas, incluindo o morango controle (não irradiado); apenas a firmeza apresentou valores diferentes estatisticamente: com o aumento da dose, houve diminuição da firmeza do fruto. No PDO, as amostras diferiram quanto à cor, sabor adocicado, firmeza e suculência, sendo que a amostra controle e a amostra irradiada com 1 kGy tiveram maiores valores de firmeza e menores de suculência e sabor adocicado. Em relação à aceitação, a amostra controle e a amostra irradiada com 1 kGy não diferiram estatisticamente pelo teste Tukey a 5%, mas diferiram das amostras irradiadas com doses de 3 kGy e de 4 kGy; no entanto, a amostra irradiada a 2 kGy não diferiu de nenhuma outra dose. Foram realizados estudos de correlações entre os dados físico-químicos de pH, acidez total titulável (ATT), sólidos solúveis (SS), açúcares totais e açúcares não redutores, antocianina (método pH diferencial), pectina, firmeza instrumental, relação entre SS/ATT (ratio) e alguns parâmetros de cor (a*, b*, c* e L), e os dados do teste sensorial descritivo, ou seja, os atributos de firmeza, suculência, sabor adocicado e gosto ácido. Os resultados obtidos foram correlações significativamente positivas entre pH e ratio, sólidos solúveis e pectina, antocianinas e parâmetros de cor (a* e c*), açúcares e parâmetros de cor (b* e c*), firmeza sensorial e firmeza instrumental, suculência e sabor xvi adocicado e firmeza sensorial e gosto ácido. Já as correlações negativas foram entre acidez e ratio, sólidos solúveis e firmeza, antocianina e L*, firmeza sensorial e sabor adocicado e suculência com: firmeza instrumental, firmeza sensorial e gosto ácido. Neste trabalho, também foi realizada a caracterização físico-química e sensorial de morangos irradiados nas doses determinadas por Lima Filho et al. (2014) como sendo correspondentes ao limiar de detecção (LD) sensorial (0,405 kGy) e ao limiar de rejeição (LR) sensorial (3,6 kGy) para morangos irradiados. Além disso, foi verificada a influência da embalagem na aceitação sensorial de morangos irradiados na dose 3,6 kGy. Todas as medidas físico-químicas apresentaram pequena variação entre as amostras controle (0 kGy) e o LD e o LR. Não houve diferença significativa em relação à aceitação da amostra irradiada na ausência e na presença da embalagem, provavelmente devido ao grau de conhecimento do painel de consumidores em relação ao processo de irradiação de alimentos. Conclui-se que a irradiação é um método de conservação que pode ser utilizado em morangos, uma vez que exerce pouca influência, no período de tempo estudado, nas suas características físico-químicas e sensoriais.

Postharvest quality of cocona (Solanum sessiliflorum Dunal) stored under ambient condition

Cocona (Solanum sessiliflorum Dunal) is an important genetic resource that has been traditionally used for a variety of purposes, including food, medical and cosmetics applications. The objective of this study was evaluated the quality and the period of postharvest shelf life of cocona 'Mosquet", through the physical, chemical and physiological characterization of fruits stored under the ambient conditions. Physiologically mature fruits were harvested from an orchard, washed with tap water and soaked in a solution of the fungicide Prochloraz (49.5 g/100 L of water) for 5 minutes. After air drying, the fruits were packed in plastic containers and stored at 24 ± 2 ºC and relative humidity 60 ± 5% for 15 days. The fruits developed a respiratory climacteric respiratory patern and remained fit for consumption up to day 6 of storage, that is, without visual symptoms of loss of water and firmness. At this stage, the fruits showed firmness of 117,42 kPa, soluble solids of 6.62º Brix and citric acid of 1.22 %.

Influence of the N/K ratio on the production and quality of cucumber in hydroponic system

The objective of this work was to evaluate the quality of fruits and the nutritional status of cucumber CV. Aodai cultivated in nutrient solutions with different N:K ratios. The hydroponic cultivation was initially performed, during the vegetative growth, in nutrient solution with 1:2.0 mmol L-1 N:K, and, later, during fruit setting, in four different nutrient solutions with N:K (w/w) at the ratios 1:1.4, 1:1.7, 1:2.0 and 1:2.5. An additional treatment with a nutrient solution containing the ratio 1:2.2 (w/w) N:K during the vegetative growth and N:K 1:1.4 (w/w) during fruit setting, both with 10% ammonium (NH4+) was included. The treatments were arranged in a randomized design with six replicates. Irrigation was carried out with deionized water until seed germination, and then with nutrient solution until 30 days after germination, when plants were transplanted. Plants in the hydroponic growing beds were irrigated with the solutions for vegetative growth, and, after 21 days, the solutions were replaced by solutions for fruit setting. At 45 and 60 days after transplanting, the fresh weight, length, diameter, volume and firmness of the fruit were evaluated, and, at 45 days after transplanting, the macronutrient concentrations in the leaves were determined. The use of different N:K ratios during fruit setting influenced the cucumber production. The ratio of 1.0:1.7 N: K (w/w), with 10% of N in the form of ammonia, is recommended for the whole cycle.