The design of hazard risk assessment matrices for ranking occupational health risks and their application in mining and minerals processing

Two hazard risk assessment matrices for the ranking of occupational health risks are described. The qualitative matrix uses qualitative measures of probability and consequence to determine risk assessment codes for hazard-disease combinations. A walk-through survey of an underground metalliferous mine and concentrator is used to demonstrate how the qualitative matrix can be applied to determine priorities for the control of occupational health hazards. The semi-quantitative matrix uses attributable risk as a quantitative measure of probability and uses qualitative measures of consequence. A practical application of this matrix is the determination of occupational health priorities using existing epidemiological studies. Calculated attributable risks from epidemiological studies of hazard-disease combinations in mining and minerals processing are used as examples. These historic response data do not reflect the risks associated with current exposures. A method using current exposure data, known exposure-response relationships and the semi-quantitative matrix is proposed for more accurate and current risk rankings.

Determination of the hemispheric character (i.e. southern or northern latitudinal position) of equatorial ionosonde stations as deduced from long-term recordings of the minimum height of the F-region (h ' F)

The virtual (or minimum) height of the F-region (h'F), recorded over a number of solar cycles for I I equatorial and mid-latitude ionosonde stations, was used to deduce the hemispheric (i.e. southern or northern hemisphere) character of equatorial stations. The semi-annual median monthly height (h'F) variations consist of two components: major local summer maximum and winter sub-maximum (about 5 percent of the summer maximum). This hemispheric pattern was most consistently observed for equatorial stations (within 5degrees of the geomagnetic equator) in a period centred on the local midnight (21-03 LT) but was also present, to a lesser extent, at mid-latitude stations and at other time intervals. It is evident that the physical parameter h'F defines the hemispheric character of an equatorial station which has different (sometimes opposite) geographic and geomagnetic latitudes. There is a sharp transition in the latitudinal character of the stations on both sides of the equator leading to hypothesis that the equal maxima in h'F in December and June solstices are observed at a near-equator position labelled as ionosonde deduced equator (IDE). Such a signature was observed for an American equatorial (both geographic and geomagnetic) station Talara (Peru) which is an experimental support of the hypothesis. The IDE can be another useful parameter characterising the equatorial ionosphere. This finding reveals a new application of the standard ionosonde data in defining the geophysical character of equatorial stations, being an important contribution to space climatology. (C) 2002 Elsevier Science Ltd. All rights reserved.

A new technique for the quantification of peripheral edema with application in both unilateral and bilateral cases

Current noninvasive techniques for the routine and frequent quantification of peripheral lymphedema in patients are total limb volume measurement (by water immersion or by circumferential measurements) and bioelectrical impedance analysis (BIA). However both of these techniques require standardizing the measurement using a contralateral measurement from the unaffected limb, Hence these techniques are essentially restricted to unilateral lymphedema. This paper describes the results from a preliminary study to investigate an alternative approach to the analysis of the data from multiple frequency BIA to produce an index of lymphedema without the need for normalization to another body segment. Twenty patients receiving surgical treatment for breast cancer were monitored prior to surgery and again after diagnosis with unilateral lymphedema. The data recorded were total limb volume, by circumferential measurements; and BIA measurements of both limbs. From these measurements total limb volumes and extracellular fluid volumes were calculated and expressed as ratios of the affected limb to that of the unaffected limb. An index of the ratio of the extracellular fluid volume to the intracellular fluid volume was determined. This ECW/ICW index was calculated for both the affected and unaffected limbs at both measurement times. Results confirmed that the established techniques of total limb volume and extracellular fluid volume normalized to the unaffected contralateral limb were accurate in the detection of lymphedema (p < 10(-6)). Comparison of the ECW/ICW index from the affected limb after diagnosis with that from the pre-surgery measurement revealed a significant (p< 10(-6)) and considerable (75%) increase. The results of this pilot study suggest that by using multiple frequency bioelectrical impedance analysis, an index of the ECW/ICW ratio can be obtained and this index appears to have an equal, or better, sensitivity, than the other techniques in detecting lymphedema. More importantly, this index does not require normalization to another body segment and can be used to detect all types of peripheral edema including both unilateral and bilateral lymphedema.

Expert system application on preliminary design of water retaining structures

Design of liquid retaining structures involves many decisions to be made by the designer based on rules of thumb, heuristics, judgment, code of practice and previous experience. Various design parameters to be chosen include configuration, material, loading, etc. A novice engineer may face many difficulties in the design process. Recent developments in artificial intelligence and emerging field of knowledge-based system (KBS) have made widespread applications in different fields. However, no attempt has been made to apply this intelligent system to the design of liquid retaining structures. The objective of this study is, thus, to develop a KBS that has the ability to assist engineers in the preliminary design of liquid retaining structures. Moreover, it can provide expert advice to the user in selection of design criteria, design parameters and optimum configuration based on minimum cost. The development of a prototype KBS for the design of liquid retaining structures (LIQUID), using blackboard architecture with hybrid knowledge representation techniques including production rule system and object-oriented approach, is presented in this paper. An expert system shell, Visual Rule Studio, is employed to facilitate the development of this prototype system. (C) 2002 Elsevier Science Ltd. All rights reserved.

Novel application of biological glue in the management of a complicated pneumothorax in cystic fibrosis

Spontaneous pneumothorax is a frequent complication in advanced lung disease of cystic fibrosis. We describe a case of a complicated pneumothorax in a 21-year old-woman with cystic fibrosis who was effectively treated with the application of biological glue via a minithoracotomy. (C) 2002 Wiley-Liss, Inc.

A compartmental model of hepatic disposition kinetics: 1. Model development and application to linear kinetics

The conventional convection-dispersion model is widely used to interrelate hepatic availability (F) and clearance (Cl) with the morphology and physiology of the liver and to predict effects such as changes in liver blood flow on F and Cl. The extension of this model to include nonlinear kinetics and zonal heterogeneity of the liver is not straightforward and requires numerical solution of partial differential equation, which is not available in standard nonlinear regression analysis software. In this paper, we describe an alternative compartmental model representation of hepatic disposition (including elimination). The model allows the use of standard software for data analysis and accurately describes the outflow concentration-time profile for a vascular marker after bolus injection into the liver. In an evaluation of a number of different compartmental models, the most accurate model required eight vascular compartments, two of them with back mixing. In addition, the model includes two adjacent secondary vascular compartments to describe the tail section of the concentration-time profile for a reference marker. The model has the added flexibility of being easy to modify to model various enzyme distributions and nonlinear elimination. Model predictions of F, MTT, CV2, and concentration-time profile as well as parameter estimates for experimental data of an eliminated solute (palmitate) are comparable to those for the extended convection-dispersion model.

Application of spatial analysis techniques to adjust for fertility trends and identify interplot competition in early stage sugarcane selection trials

Most sugarcane breeding programs in Australia use large unreplicated trials to evaluate clones in the early stages of selection. Commercial varieties that are replicated provide a method of local control of soil fertility. Although such methods may be useful in detecting broad trends in the field, variation often occurs on a much smaller scale. Methods such as spatial analysis adjust a plot for variability by using information from immediate neighbours. These techniques are routinely used to analyse cereal data in Australia and have resulted in increased accuracy and precision in the estimates of variety effects. In this paper, spatial analyses in which the variability is decomposed into local, natural, and extraneous components are applied to early selection trials in sugarcane. Interplot competition in cane yield and trend in sugar content were substantial in many of the trials and there were often large differences in the selections between the spatial and current method used by the Bureau of Sugar Experiment Stations. A joint modelling approach for tonnes sugar per hectare in response to fertility trends and interplot competition is recommended.

Adjustment of homeless adolescents to a crisis shelter: Application of a stress and coping model

The present study examined the utility of a stress and coping model of adaptation to a homeless shelter among homeless adolescents. Seventy-eight homeless adolescents were interviewed and completed self-administered scales at Time 1 (day of shelter entry) and Time 2 (day of discharge). The mean duration of stay at the shelter was 7.23 days (SD = 7.01). Predictors included appraisal (threat and self-efficacy), coping resources, and coping strategies (productive, nonproductive, and reference to others coping). Adjustment outcomes were Time I measures of global distress, physical health, clinician-and youthworker- rated social adjustment, and externalizing behavior and Time 2 youthworker-rated social adjustment and goal achievement. Results of hierarchical regression analyses indicated that after controlling for the effects of relevant background variables (number of other shelters visited, sexual, emotional, and physical abuse), measures of coping resources, appraisal, and coping strategies evidenced distinct relations with measures of adjustment in ways consistent with the model's predictions with few exceptions. In cross-sectional analyses better Time I adjustment was related to reports of higher levels of coping resources, self-efficacy beliefs, and productive coping strategies, and reports of lower levels of threat appraisal and nonproductive coping strategies. Prospective analyses showed a link between reports of higher levels of reference to others coping strategies and greater goal achievement and, unexpectedly, an association between lower self-efficacy beliefs and better Time 2 youthworker-rated social adjustment. Hence, whereas prospective analyses provide only limited support for the use of a stress and coping model in explaining the adjustment of homeless adolescents to a crisis shelter, cross-sectional findings provide stronger support.

Engaging with theories of dialogue and voice: Using Bakhtin as a framework to understand teaching and learning Indigenous Australian women's performance

In this paper I explore the Indigenous Australian women's performance classroom (hereafter ANTH2120) as a dialectic and discursive space where the location of possibility is opened for female Indigenous performers to enter into a dialogue from and between both non-Indigenous and Indigenous voices. The work of Bakhtin on dialogue serves as a useful standpoint for understanding the multiple speaking positions and texts in the ANTH2120 context. Bakhtin emphasizes performance, history, actuality and the openness of dialogue to provide an important framework for analysing multiple speaking positions and ways of making meaning through dialogue between shifting and differing subjectivities. I begin by briefly critiquing Bakhtin's "dialogic imagination" and consider the application and usefulness of concepts such as dialogism, heteroglossia and the utterance to understanding the ANTH2120 classroom as a polyphonic and discursive space. I then turn to an analysis of dialogue in the ANTH2120 classroom and primarily situate my gaze on an examination of the interactions that took place between the voices of myself as family/teacher/student and senior Yanyuwa women from the r e m o t e N o r t h e r n T e r r i t o r y A b o r i g i n a l c o m m u n i t y o f B o r r o l o o l a as family/performers/teachers. The 2000 and 2001 Yanyuwa women's performance workshops will be used as examples of the way power is constantly shifting in this dialogue to allow particular voices to speak with authority, and for others to remain silent as roles and relationships between myself and the Yanyuwa women change. Conclusions will be drawn regarding how my subject positions and white race privilege affect who speaks, who listens and on whose terms, and further, the efficacy of this pedagogical platform for opening up the location of possibility for Indigenous Australian women to play a powerful part in the construction of knowledges about women's performance traditions.

Design of microchannel free-space optical interconnects based on vertical-cavity surface-emitting laser arrays

We investigate the design of free-space optical interconnects (FSOIs) based on arrays of vertical-cavity surface-emitting lasers (VCSELs), microlenses, and photodetectors. We explain the effect of the modal structure of a multimodeVCSEL beam on the performance of a FSOI with microchannel architecture. A Gaussian-beam diffraction model is used in combination with the experimentally obtained spectrally resolved VCSEL beam profiles to determine the optical channel crosstalk and the signal-to-noise ratio (SNR) in the system. The dependence of the SNR on the feature parameters of a FSOI is investigated. We found that the presence of higher-order modes reduces the SNR and the maximum feasible interconnect distance. We also found that the positioning of a VCSEL array relative to the transmitter microlens has a significant impact on the SNR and the maximum feasible interconnect distance. Our analysis shows that the departure from the traditional confocal system yields several advantages including the extended interconnect distance and/or improved SNR. The results show that FSOIs based on multimode VCSELs can be efficiently utilized in both chip-level and board-level interconnects. (C) 2002 Optical Society of America.