Physicochemical evaluation and fatty acids profile of broiler chicken fed broiler diets containing barley brewer (Hordeum vulgare)

The aim of this study was to analyze the chemical composition and the fatty acids (FA) profile of broiler chicken (breast and thigh/on-thigh) fed diets containing 10 and 20% of barley and a control diet. The FAs were evaluated by gas chromatography. There was not a significant difference (p > 0.05) in the breast chemical composition. In the thigh/on-thigh cut, the ration containing 20% of barley reduced the ashes (p < 0.05). Regarding the saturated FA composition, only the breast myristic acid treated with 10% of barley was reduced (p < 0.05). None of the diets influenced the polyunsaturated (PUFA) and monounsaturated (MUFA) FA's content (p > 0.05). As for the ω6/ω3 ratio, the highest one was observed in the 20% barley fed animals, in both cuts, being considered the worst quality. It can be concluded that the 20% barley ration was worse than the others and the 10% barley ration was better than the control ration, especially when considering the saturated FA quantity that was reduced.

Serum lipid profile and hepatic evaluation in mice fed diet containing pequi nut or pulp (Caryocar brasiliense Camb.)

Caryocar brasiliense (popular name pequi) is widely consumed by the population of Brazilian Savannah. This fruit has a high concentration of monounsaturated fatty acids that can influence positively the lipid profile. In addition, pequi also has an important concentration of saturated fatty acids which, in turn, is associated with atherosclerosis risk. This study aimed to investigate the effect of a pequi-supplemented diet on blood lipid and glucose levels and hepatic histology. Female Albino swiss mice were divided into three groups and fed a standard chow diet (control group), chow diet supplemented with 33% pequi nut (nut group), and chow diet supplemented with 33% pequi pulp (pulp group). After 6 weeks, following an overnight fast, blood and liver were collected for posterior analyses. Serum total cholesterol and HDL-cholesterol were significantly higher in mice fed pequi-rich diets compared to the control group. Nevertheless, there was no modification in blood triglycerides, atherogenic fraction, and glucose levels. In addition, there was development of liver microvesicular steatosis related to pequi intake. In conclusion, the diets supplemented with pequi nut or pulp reduced the atherogenic risk by increasing the anti-atherogenic lipoproteins without changing the pro-atherogenic fraction in mice.

Viscosity of egg white from hens of different strains fed with commercial and natural additives

Yolk color and egg white (albumen) cleanliness and viscosity are important parameters by which consumers judge the quality of eggs. This study aimed to investigate changes in albumen viscosity during storage of eggs for up to 36 days from two different commercial laying hen strains (Carijo Barbada and Isa Brown) fed a diet containing annatto (1.5 and 2.0%) or a synthetic additive without synthetic colorants (control). Analyses of humidity, albumen height, pH, viscosity, foam formation, and stability were carried out on eggs. Carijo Barbada strain had smaller albumen, lower humidity and higher egg white viscosity than Isa Brown strain; however, with storage, viscosity lowered significantly on both strains. Initially, the addition of 2.0% of annatto or a synthetic additive increased viscosity in both strains, but with storage only the control maintained longer viscosity. Lower viscosity did not change foam density and stability.

Egg quality and yolk lipid composition of laying hens fed diets containing cashew nut meal

The objective of this study was to assess the effect of the addition of cashew nuts meal (0, 5, 10, 15, 20, and 25%) to laying hen diets on egg quality and yolk composition. The variables studied were: egg weight, specific gravity, Haugh Units, percentages of shell, albumen, and yolk, moisture, total solids, total lipids, fatty acids profile, and yolk cholesterol. The addition of up to 25% of cashew nuts meal to hen diets did not affect egg quality and freshness, moisture and total solids content. However, an increase in total lipid content and a decrease in yolk pigmentation was observed. Oleic acid level increased in the yolk, whereas palmitic, stearic, and linoleic acid levels decreased. The addition of cashew nuts meal increased the monounsaturated/saturated fatty acid ratio in the yolk and reduced the cholesterol content. Therefore, the use of cashew nuts meal in laying hen diets favorably modifies the fatty acid composition of egg yolk and contributes to a better acceptance of this food by consumers since it also reduces yolk cholesterol levels.

Quality of royal jelly produced by Africanized honeybees fed a supplemented diet

This study was carried out to evaluate the effect of artificial supplements prepared with soybean protein isolate, brewer's yeast, mixture of soybean protein isolate with brewer's yeast, linseed oil, palm oil, and a mixture of linseed oil with palm oil on the physicochemical and microbiological composition of royal jelly produced by Africanized honey bee colonies. Considering these results, providing supplements for Africanized honeybee colonies subjected to royal jelly production can help and strengthen the technological development of the Brazilian beekeeping industry increasing its consumption in the national market. This research presents values of royal jelly a little different from those established by the Brazilian legislation. This fact shows that is important to discuss or change the official method for royal jelly analysis. The characterization of physicochemical and microbiological parameters is important in order to standardize fresh, frozen, and lyophilized royal jelly produced by Africanized honeybees.

Incorporation and profile of fatty acids in tilapia fillets (Oreochromis niloticus) fed with tung oil

The acceptance of tung oil enriched diet and the incorporation of conjugated linolenic acid - CLnA into fillets of Genetically Improved Farmed Tilapia (GIFT) were investigated. The diet was well accepted, and after 10 days CLnA was incorporated into the fillets with a 1.02% content of total fatty acids (FA). In addition, biosynthesis of the conjugated linoleic acid isomers - CLA (0.31% of fillet total FA content) from CLnA, and the presence of alpha-linolenic acid - LNA (1.08% of fillet total FA content), eicosapentaenoic acid - EPA (2.85% of fillet total FA content) and docosahexaenoic acid - DHA (3.08% of fillet total FA content) were observed. Therefore, the consumption of this fish can increase the intake of different FA (CLnA, CLA, LNA, EPA and DHA), which play an important role in human metabolism.

Fresh meat quality of pigs fed diets with different fatty acid profiles and supplemented with red wine solids

Abstract Three groups of pigs were fed three different diets, namely a diet rich in saturated fatty acids (palm oil-based, PO), a polyunsaturated fatty acid (PUFA)-rich diet (corn oil-based, CO), and a PUFA-rich diet (corn oil-based) supplemented with red wine solids (RWS), which was added to the diet (CO+RWS) in order to assess the protective effect on the oxidative status of the pork meat. The addition of corn oil favourably modulates the FAs profile of the backfat, and to a lesser extent of the intramuscular fat of semimembranosus muscle, without causing adverse effects on the meat quality or on its oxidative stability. Moreover, these parameters were not affected by the addition of the RWS in the CO+RWS diet.

Näin opetan lisäävää valmistusta ja 3D-tulostusta: Pohdintoja uuden teknologian opetuksesta ja koulutuksesta

Additive manufacturing (shortened as AM), or more commonly 3D printing, consists of wide variety of different modern manufacturing technologies. AM is based on direct printing of a digital 3D model to a final product which is fabricated adding material layer by layer. This is from where term additive manufacturing has its origin. It is not only material what is added, but it is also value, properties etc. which are added. AM enables production of different and even better products compared to conventional manufacturing technologies. An estimation of potential of additive manufacturing can be gathered by considering the potential of laser cutting, which is one of the most widely used modern manufacturing technologies. This technique has been used over 40 years, and whole market around this technology is at the moment c. four billion euros and yearly growth is around 10 %. One factor affecting this success of laser cutting is that laser cutting enables radical improvements to products made of flat sheet. AM and 3D printing will do the same for three dimensional parts. Laser devices, which are at the moment used in 3D printing, are globally at the moment only around 1% of all laser devices used in any fabrication technology, so even with a cautious estimate the potential growth of at least 100 % is coming in next few years. Role of education is very important, when this kind of modern technology is industrially implemented. When both generation entering to work life and also generation who has been a while in work life understands new technology, its potential and limitations, this is the point when also product design can be rethought Potential of product design is driving force for wide use of additive manufacturing and 3D printing. Utilization of additive manufacturing and 3D printing is also opportunity for Finland and Finnish industry. This technology can save Finnish manufacturing industry. This technique has stron potential, as Finland has traditionally strong industrial know-how and good ICT knowledge.

Synthesis and characterization of nanoperforated metal oxide thin films

For advanced devices in the application fields of data storage, solar cell and biosensing, one of the major challenges to achieve high efficiency is the fabrication of nanopatterned metal oxide surfaces. Such surfaces often require both precise structure at the nanometer scale and controllable patterned structure at the macro scale. Nowadays, the dominating candidates to fabricate nanopatterned surfaces are the lithographic technique and block-copolymer masks, most of which are unfortunately costly and inefficient. An alternative bottom-up approach, which involves organic/inorganic self-assembly and dip-coating deposition, has been studied intensively in recent years and has proven to be an effective technique for the fabrication of nanoperforated metal oxide thin films. The overall objective of this work was to optimize the synthesis conditions of nanoperforated TiO2 (NP-TiO2) thin films, especially to be compatible with mixed metal oxide systems. Another goal was to develop fabrication and processing of NP-TiO2 thin films towards largescale production and seek new applications for solar cells and biosensing. Besides the traditional dip-coating and drop-casting methods, inkjet printing was used to prepare thin films of metal oxides, with the advantage of depositing the ink onto target areas, further enabling cost-effective fabrication of micro-patterned nanoperforated metal oxide thin films. The films were characterized by water contact angle determination, Atomic Force Microscopy, Scanning Electron Microscopy, X-ray Photoelectron Spectroscopy and Grazing Incidence XRay Diffraction. In this study, well-ordered zinc titanate nanoperforated thin films with different Zn/Ti ratios were produced successfully with zinc precursor content up to 50 mol%, and the dominating phase was Zn2Ti3O8. NP-TiO2 structures were also obtained by a cost-efficient means, namely inkjet printing, at both ambient temperature and 60 °C. To further explore new biosensing applications of nanoperforated oxide thin films, inkjet printing was used for the fabrication of both continuous and patterned polymeric films onto NP-TiO2 and perfluorinated phosphate functionalized NP-TiO2 substrates, respectively. The NP-TiO2 films can be also functionalized with a fluoroalkylsilane, resulting in hydrophobic surfaces on both titania and silica. The surface energy contrast in the nanoperforations can be tuned by irradiating the films with UV light, which provides ideal model systems for wettability studies.

Publication Statistics Sheet Music 1991-

Vapaakappalekartuntaan perustuva tilasto Suomessa kustannetuista nuottijulkaisuista vuodesta 1991 lähtien

Työkoneen levypyörän kantavuus

Työkoneen vanteen kantavuuslaskentaan käytettävän taulukon epäiltiin tuottavan todellista huonompia kantavuuksia etenkin suurten offset-arvon vanteiden tapauksessa. Tutkimuksessa yhdestä tyypillistä kokoa edustavasta vannetyypistä valmistettiin offset-säädettävä erikoisvanne. Vanteen käytön aikaisia rasituksia seurattiin venymäliuska-antureilla koeajoradalla tavanomaisissa ajotilanteissa eri offset-arvoilla traktorilla vedettävän kuormitetun testivaunun avulla. Saatuja tuloksia vertailtiin vanteen elementtimallin tuloksiin ja käytettyjä kuormitusolettamia muutettiin. Tutkimuksen tuloksena kantavuuden laskentaan käytettävän taulukon todettiin toimivan pääosin mittauksen mukaisesti. Vanteen offset-arvolla on laskentataulukon mukaisesti merkittävä vaikutus vanteen keskiön väsymiskestävyyteen. Suurilla negatiivisilla offset-arvoilla vanteen kestoiän määrä ajo taisella alustalla, kun taas suurten positiivisten vanteiden väsymisvaurio aiheutuu pääosin kaltevalla pinnalla ajosta. Mittauksella pystyttiin osoittamaan laskentataulukon konservatiivinen olettama etenkin suurten negatiivisten offset-arvojen vanteille, jolla kyseenomaisten vanteiden väsymiskestoikää voidaan parantaa merkittävästi. Lisäksi laskentaohjelman tekemisessä käytettyjen kuormitus- ja reunaehto-olettamien vahvistettiin toimivan keskiön kannalta riittävällä tarkkuudella. Havainnolla on tärkeä rooli tulevissa elementtimenetelmään perustuvissa kantavuuslaskelmissa.

Linking of stress offset score (SOS), work satisfaction, and organizational commitment to intentions to quit

The purpose of this study was to identify the impact of stressors and offsetting satistiers, measured in this study with Stress Offset Score (SOS), on intentions to quit and examine the mediating and moderating effects of three facets of work satisfaction (job satisfaction, pay satisfaction, and satisfaction with supervisor) and two facets of organizational commitment (affective and nonnative commitment) on this relationship. The sample was composed of 2990 employees from 21 public and private organizations. The interaction of each type of work satisfaction and organizational commitment, with SOS, was tested using Ordinary Least Squares (OLS) procedures. Intentions to quit was the dependent variable. The research questions were determine: (1) Does SOS predict intentions to quit? (2) Does work satisfaction mediate the predictive relationship of SOS on intentions to quit? (3) Does organizational commitment mediate the predictive relationship of SOS on intent to quit? (4) Does work satisfaction moderate the predictive relationship of SOS on intentions to quit? and (5) Does organizational commitment moderate the predictive relationship of SOS on intentions to quit? The results indicated that SOS was negatively correlated with intentions to quit. Each of the types of work satisfaction and organizational commitment variables showed a partial mediated relationship with SOS and each relationship was highly significant, while normative commitment explained more of the relationship then other mediators. The study also tested for interactions but no statistical significant relationships where established between any of the interaction terms (e.g., SOSxJob Satisfaction and SOSxAffcctive Commitment) and intentions to quit.

Ribbed moraines and subglacial geomorphological signatures of interior-sector palaeo-ice sheet dynamics

Transverse, subglacial bedforms (ribbed moraines) occur frequently in southern Keewatin, Nunavut, Canada, where they record a complex glacial history, including shifting centers of ice dispersal and fluctuating basal thermal regimes. Comprehensive mapping and quantitative morphometric analysis of the subglacial bedform archive in this sector reveals that ribbed moraines are spatially clustered by size and assume a broad range of visually distinct forms. Results suggest that end-member morphologies are consistent with a dichotomous polygenetic origin, and that a continuum of forms emerged through subsequent reshaping processes of variable intensity and duration. Translocation of mobile, immobile and quasi-mobile beds throughout the last glacial cycle conditioned the development of a subglacial deforming bed mosaic, and is likely responsible for the patchy zonation of palimpsest and inherited landscape signatures within this former core region of the Laurentide Ice Sheet. Comparison against field evidence collected from central Norway suggests that bedforming processes can be locally mediated by pre-existing topography.