A indústria de processamento químico no Brasil: suas motivações para pesquisa e desenvolvimento e suas interfaces com as políticas governamentais

As the Chemical Science is an experimental one a Chemical Industry require technical people in all its staff level: from Directors and Managers to Operators. This chemical and chemical engineering based education is the foundation of the innovate process and motivation. The paper discusses this and the role of Public Policies to improve the R&D and innovation in the Brazilian Chemical Industry.

Desafios da química analítica frente às necessidades da indústria farmacêutica

The development of liquid chromatography-mass spectrometric (LC-MS) techniques in the last few decades has made possible the analysis of trace amounts of analytes from complex matrices. With LC, the analytes of interest can be separated from each other as well as from the interfering matrix, after which they can be reliably identified thanks to the sensitivity and specificity of MS. LC-MS has become an irreplaceable tool for many applications, ranging from the analysis of proteins or pharmaceuticals in biological fluids to the analysis of toxic substances in environmental samples. In different segments of Brazilian Industry mass spectrometry has an important role, e.g. in the pharmaceutical industry in the development of generic formulations, contributing to the growth of Industry and social inclusion. However, the Brazilian chemists until this moment don't have an effective role in this new segment of the analytical chemistry in Brazil. The present paper shows the actual scenario for mass spectrometry in the pharmaceutical industry, emphasizing the need of a revision of graduation courses to attend the needs of this growing market.

Triterpenos e alcalóide tipo cantinona dos galhos de Simaba polyphylla (Cavalcante) W.W. Thomas (Simaroubaceae)

Simaba polyphylla is a small tree found in the Amazon region, known by the common names "marupazinho" or "serve para tudo". It is used in traditional medicine for the treatment of fevers. This work describes the phytochemical study of the hexane extract and chloroform fraction obtained by partitioning the methanol extract of stems, which led to isolation and identification of the triterpenes niloticin, dyhidroniloticin, taraxerone and of the cytotoxic alkaloid 9-methoxy-canthin-6-one. These compounds are described for the first time in S. polyphylla.

Caracterização química do "pitch" em indústria de celulose e papel de Eucalyptus

The chemical analysis of the acetone, chloroform, toluene and methanol extracts of a pitch sample was carried out by IR and GC-MS, leading to the identification of sixty nine compounds, including fatty acids, alcohols and hydrocarbons. Analysis of the acetone extractive of a eucalyptus wood used in Brazil for pulp production was also carried out, resulting in identification of fifty nine compounds, including mainly fatty acids, phenolic compounds, beta-sitosterol and other steroids. This analysis showed that pitch formation had a contribution from wood extractives and other sources of contamination. The results obtained and the methodology applied can be used by the pulp industry to develop new methods of pitch control.

Estudo da oxidação total do etanol usando óxidos tipo perovskita LaBO3 (B= Mn, Ni, Fe)

The present work investigated the effect of coprecipitation-oxidant synthesis on the specific surface area of perovskite-type oxides LaBO3 (B= Mn, Ni, Fe) for total oxidation of ethanol. The perovskite-type oxides were characterized by X-ray diffraction, nitrogen adsorption (BET method), thermogravimetric analysis (TGA-DTA), TPR and X-ray photoelectron spectroscopy (XPS). Through method involving the coprecipitation-oxidant was possible to obtain catalysts with different BET specific surface areas, of 33-51 m²/g. The results of the catalytic test confirmed that all oxides investigated in this work have specific catalytic activity for total oxidation of ethanol, though the temperatures for total conversion change for each transition metal.

Indústria química: evolução recente, problemas e oportunidades

Chemical industry underwent a significant upturn in the past few years. In Brazil, the position of this industry has been continuously strengthened as the second largest industrial sector. Current circumstances are discussed, especially the need for increased innovation, the impacts of nanotechnology, biotechnology and information technologies. Some misconceptions on the Brazilian chemical industry are criticized and recent improvements are described, including those related to environmental protection, to conclude that its prospects are very good, considering both the availability of basic raw materials (oil, natural gas, agribusiness products and minerals), the growing demand and increased competitiveness.

Caracterização física, química e ecotoxicológica de efluente da indústria de fabricação de explosivos

The production and use of nitroaromatic explosives have resulted in their dissemination into the environment, where their presence in waterways and soil represents an ecological and health hazard. The hazardous characteristics of these compounds need to be carefully studied, so that the impact of their discharge on the environment can be better evaluated. This work presents the characterization of wastewater from Brazilian TNT industry using as analytical techniques mass spectroscopy, chromatography, toxicity assays and other physico-chemical analyses.

Resistência mecânica de hidrogéis termo-sensíveis constituídos de Alginato-Ca2+ / PNIPAAm, tipo Semi-IPN

Thermosensitive hydrogels were synthesized using alginate-Ca2+ in association with a thermosensitive polymer, such as PNIPAAm. The mechanical properties of the hydrogels were determined measuring the maximum tension of deformation. With the increase of the temperature by 25 to 40 ºC above the LCST the chains of PNIPAAm collapsed, dragging the alginate net and diminishing the size of the pores. The decrease in the size of the pores of the hydrogel was followed by an increase in the mechanicals resistance of the material.

Composição química de um resíduo alcalino da indústria de papel e celulose (DREGS)

Dregs is an alkaline solid by-product generated in the cellulose manufacturing industry that could be used to correct soil acidity. The present study aimed to evaluate the chemical composition of this product and some of its properties. The dregs presented 354 g kg-1 of calcium, neutralization capacity of 80.3%, and pH 10.7, besides low concentration of sodium (10.2 g kg-1), lead (62.9 mg kg-1) and cadmium (5.6 mg kg-1). Thus, it is a product that can safely be used to increase the soil pH.

Potencial de aplicação do processo foto-fenton/solar como pré-tratamento de efluente da indústria de laticínios

Dairy wastewater is characterized by frequent episodes of drastic increases of organic content, giving rise to bulking filamentous bacteria and compromising the biological treatment process. This study reports the reduction of organic content of such wastewater by the application of the solar photo-Fenton process. For a wastewater containing 335, 2627 or 5400 mg C L-1 between 90% and 50% of the organic carbon content were removed after 3.5 h irradiation. The results show that the solar photo-Fenton process can be a good alternative for the abatement of organic content of dairy wastewater, especially in cases of organic content fluctuation, allowing an efficient biological treatment.

Diterpenos tipo abietano isolados de Plectranthus barbatus Andrews

Plectranthus barbatus is largely used in the Northeast region of Brazil by the local population for treatment of digestive problems as substitute of boldo (Pneumus boldus). Phytochemical analysis of the leaf extracts of Plectranthus barbatus (Labiatae) cultivated in this region yielded two abietane diterpenoids, cyclobubatusin (1) and barbatusin (2) and a new one named 7beta-acetyl-12-deacetoxycyclobutatusin (3). The structures of the isolated compounds were established by spectral analysis, using mainly mass spectra and ¹H and 13CNMR (1D and 2D). These procedures permitted the assignment of all chemical shifts in the diterpenoids.

Posada en funcionament d'una oficina de tramitació ràpida (OTRA) de la Direcció General d'Indústria, del Govern de les Illes Balears

La Direcció General d’Indústria té com a principal finalitat el control de les instal•lacions i de diferents activitats de l’àmbit industrial; exerceix aquesta funció mitjançant la tramitació de documentacions tècniques i la inspecció. Com tota Administració Pública, es troba en un entorn molt dinàmic, on només les empreses més competitives poden subsistir i els ciutadans tenen noves necessitats molt diferents de les de fa un temps. Ambdós, empreses i ciutadans, exigeixen serveis de qualitat a un sector públic que no té altra alternativa que caminar en la mateixa direcció. L’objectiu d’aquest treball és planificar una sèrie d’accions estratègiques que permetran la millora dels serveis oferts a fi de complir amb les expectatives de la ciutadania. S’ha realitzat una anàlisi interna i de l’entorn de l’organització, el resultat de la qual ha estat la detecció d’una sèrie de punts de millora. A continuació s’ha definit una pla operatiu de qualitat, emmarcat dins del segon Pla Estratègic de Qualitat del Govern de les Illes Balears, amb tres propostes d’actuació: la separació de funcions, la tramitació ràpida d’expedients i el pla de formació. Les propostes esmentades constitueixen les bases d’una nova unitat orgànica (Oficina de Tramitació Ràpida), el model organitzatiu de la qual queda definit en els diferents apartats del treball. Igualment, s’hi descriu el procés de posada en funcionament dels distints procediments que es vagin adaptant al nou sistema i la planificació dels treballs a dur a terme, que seguiran el cicle de la qualitat de Deming, és a dir, planificar, fer, verificar i actuar.

"Vinci Cosmetics" Fabricación y comercialización de productos cosméticos

Contexto: La idea principal es la creación de una empresa para la fabricación y comercialización de productos cosméticos de alta gama. A pesar del contexto de crisis económica en el que estamos envueltos estos últimos años y del que no parece que acabamos de salir, el sector de la cosmética está resistiendo la situación de forma envidiable. De la crisis, como dicen los economistas, “se saldrá y se volverá, todo es cíclico” y viendo la fortaleza que éste sector está mostrando unido a la necesidad de que nuestra economía abandone sectores muy deteriorados y sin una previsión positiva de futuro, la cosmética se postula con un futuro prometedor dentro del contexto económico español y europeo. “Vinci Cosmetics” es el nombre inicialmente pensado para que la nueva compañía inicie su andadura. Nombre con tintes latinos de la lejana época del imperio romano como homenaje a la rica herencia histórica de la ciudad del autor del proyecto - Tarragona. La cultura por cuidarse y sentirse bien, muy arraigada en la mentalidad latina y mediterránea, es un factor cultural clave para el desarrollo y futura evolución de esta industria. El slogan de la empresa, “Dieta Mediterránea para tu piel”, clarifica en buena medida la idea a desarrollar y los objetivos pretendidos por la estrategia empresarial. Objetivos: El objetivo esencial del TFC es elaborar un estudio detallado para la creación de una empresa de fabricación y comercialización de productos cosméticos de alta gama que abarque el management y la gestión por procesos de la empresa, la función de marketing, el tipo de operaciones y procesos a realizar, la gestión del factor humano y el presupuesto necesario para cubrir este ambicioso proyecto. En detalle, un completo plan de empresa que marque las directrices de la organización industrial que se pretende crear compuesto a su vez por cinco planes: plan de gerencia, plan de marketing, plan de operaciones, plan de recursos humanos y plan económico – financiero. Procedimientos: El proyecto tiene un alto componente de estudio de mercados y de marketing pero pretende también abarcar el management, los procesos de operación, el factor humano y el aspecto económico y financiero de las inversiones y presupuesto necesario. El estudio inicial centrará su esfuerzo en un análisis del mercado de la península ibérica, y, en función del avance y del progreso esperado por la empresa, la compañía podría extender su campo de acción a Europa aunque no antes de un medio plazo. “Vinci Cosmetics” ha adoptado referenciales de sistemas de gestión integrados en toda la organización. Así tenemos principalmente, por un lado, la norma internacional ISO 9001:2008 y, por otro, el Modelo EFQM de Excelencia en la gestión; ambos plasmados a partir de un enfoque basado en procesos que nos garantiza el control continuo y la gestión excelente. Conclusiones: Tras evaluar la situación actual del mercado de la cosmética, las previsiones futuras de éste y las necesidades que una organización industrial necesita, se puede crear - con plenas garantías de éxito como organización empresarial y desde el punto de vista económico - una empresa de cosméticos de alta gama para cubrir las necesidades de una parte de mercado que lo requiere.

Modificação química e física do amido de quirera de arroz para aproveitamento na indústria de alimentos

The study evaluated the efficiency of chemical (phosphorylation) and physical (extrusion) modifications of the starch of broken rice. Results demonstrated a reduction in the moisture content of extruded and phosphorylated broken rice and an increase in the ash content of phosphorylated broken rice. Both phosphorylation and extrusion increased cold water binding capacity, swelling power, and solubility. Extruded and phosphorylated pastes were stable under refrigeration, but only extruded paste was stable when submitted to freezing. Phosphorylated paste had the lowest viscosity and the highest stability during heating, while the extruded one gelatinized without heating, but had higher losses during heating.

Caracterização e classificação de resíduo sólido "pó de rocha granítica" gerado na indústria de rochas ornamentais

The ornamental rock industry generates huge amounts of wastes during the process of extraction and sawing of rock blocks. The ornamental rock powder waste is a non-biodegradable material, which represents the increase in environmental problem. The waste was collected from a granitic rock sawing plant located in Santo Antônio de Pádua, Rio de Janeiro. The chemical-environmental characterization and classification of the waste were done according to ABNT standards. The results showed that the granitic rock powder waste should be classified as Class II A - "No Inert", because of its high concentrations of lead, chrome, iron and manganese.