High concentrations of the melatonin metabolite, N-1-acetyl-N (2)-formyl-5-methoxykynuramine, in cerebrospinal fluid of patients with meningitis: a possible immunomodulatory mechanism

We evaluated the presence of the melatonin metabolite N-1-acetyl-N-2-formyl-5-methoxykynuramine (AFMK), in cerebrospinal fluid (CSF) of patients with viral meningitis (n = 20) and control samples (n = 8) and correlate AFMK levels with inflammatory markers such as cellularity, protein, tumor necrosis factor (TNF)-alpha, interleukin (IL)-8 and IL-1 beta levels. A portion of the CSF was extracted with dichloromethane (1:5) and analyzed by high-performance liquid chromatography (HPLC) under standardized conditions for AFMK. AFMK was detected in 16 of 20 CSF samples of patients with viral meningitis; the concentration of AFMK was found to be above the quantification limit (50 nmol/L) in six of these samples. AFMK was not detected in any of the eight control samples. The samples were classified into groups according to AFMK levels: undetectable (< 10 nmol/L, group I), detectable but below the quantification limit (< 50 nmol/L, group II), and quantified (> 50 nmol/L, group III). Group II presented the highest levels of proteins and IL-8, whereas group III showed the lowest levels of the inflammatory parameters. This study supports our hypothesis that inflammation favors the formation of AFMK and that this compound has immunomodulatory activity in vivo.

Blockade of fear-induced antinociception with intra-amygdala infusion of midazolam: Influence of prior test experience

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Supercritical fluid extraction for pesticide multiresidue analysis in honey: determination by gas chromatography with electron-capture and mass spectrometry detection

An analytical procedure using supercritical fluid extraction (SFE) and capillary gas chromatography with electron-capture detection was developed to determine simultaneously residues of different pesticides (organochlorine, organophosphorus, organonitrogen and pyrethroid) in honey samples. Fortification experiments were conducted to test conventional extraction (liquid-liquid) and optimize the extraction procedure in SFE by varying the CO2-modifier, temperature, extraction time and pressure. Best efficiency was achieved at 400 bar using acetonitrile as modifier at 90 degreesC. For the clean-up step, Florisil cartridges were used for both methods LLE and SFE. Recoveries for majority of pesticides from fortified samples of honey at fortification level of 0.01-0.10 mg/kg ranged 75-94% from both methods. Limits of detection found were less than 0.01 mg/kg for ECD and confirmation of pesticide identity was performed by gas chromatography-mass spectrometry in selected-ion monitoring mode. The multiresidue methods in real honey samples were applied and the results of developed methods were compared. (C) 2004 Elsevier B.V. All rights reserved.

Multiresidue analysis of pesticides in soil by supercritical fluid extraction/gas chromatography with electron-capture detection and confirmation by gas chromatography-mass spectrometry

The applicability of supercritical fluid extraction (SFE) in pesticide multiresidue analysis (organohalogen, organonitrogen, organophosphorus, and pyrethroid) in soil samples was investigated. Fortification experiments were conducted to test the conventional extraction (solid-liquid) and to optimize the extraction procedure in SFE by varying the CO2 Modifier, temperature, extraction time, and pressure. The best efficiency was achieved at 400 bar using methanol as modifier at 60 degreesC. For the SFE method, C-18 cartridges were used for the cleanup. The analytical screening was performed by gas chromatography equipped with electron-capture detection (ECD). Recoveries for the majority of pesticides from spiked samples of soil at different residence times were 1, 20, and 40 days at the fortification level of 0.04-0.10 mg/kg ranging from 70 to 97% for both methods. The detection limits found were <0.01 mg/kg for ECD, and the confirmation of pesticide identity was performed by gas chromatography-mass spectrometry in a selected-ion monitoring mode. Multiresidue methods were applied in real soil samples, and the results of the methods developed were compared.

A continuously differentiable upwinding scheme for the simulation of fluid flow problems

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

High-performance liquid chromatographic separation and identification of polyphenolic compounds from the infusion of Davilla elliptica St. Hill

The isolation of polyphenolic compounds from an infusion of the Brazilian plant Davilla elliptica (Dilleniaceae), used as tea by virtue of its digestive properties, is described. An improved preparative HPLC method was used in order to isolate pure polyphenols from the complex mixture. Liquid-liquid extraction and solid-phase extraction were employed to minimise the interference of polymeric compounds and to provide an enriched fraction of the compounds of interest. The identification of the isolated compounds was performed using analytical HPLC as well as direct injection electrospray ionisation ion trap tandem mass spectrometry (ESI-IT-MS/MS). The high flavonoid content suggests that D. elliptica may be a promising source of compounds to produce natural phytomedicines. Copyright (C) 2007 John Wiley & Sons, Ltd.

Analysis of the different forms of application and types of cutting fluid used in plunge cylindrical grinding using conventional and superabrasive CBN grinding wheels

The work reported here involved an investigation into the grinding process, one of the last finishing processes carried out on a production line. Although several input parameters are involved in this process, attention today focuses strongly on the form and amount of cutting fluid employed, since these substances may be seriously pernicious to human health and to the environment, and involve high purchasing and maintenance costs when utilized and stored incorrectly. The type and amount of cutting fluid used directly affect some of the main output variables of the grinding process which are analyzed here, such as tangential cutting force, specific grinding energy, acoustic emission, diametrical wear, roughness, residual stress and scanning electron microscopy. To analyze the influence of these variables, an optimised fluid application methodology was developed (involving rounded 5, 4 and 3 turn diameter nozzles and high fluid application pressures) to reduce the amount of fluid used in the grinding process and improve its performance in comparison with the conventional fluid application method (of diffuser nozzles and lower fluid application pressure). To this end, two types of cutting fluid (a 5% synthetic emulsion and neat oil) and two abrasive tools (an aluminium oxide and a superabrasive CBN grinding wheel) were used. The results revealed that, in every situation, the optimised application of cutting fluid significantly improved the efficiency of the process, particularly the combined use of neat oil and CBN grinding wheel. (c) 2005 Elsevier Ltd. All rights reserved.

A sustainable alternative for cooling the machining processes using a refrigerant fluid in recirculation inside the toolholder

This article presents a cooling system for cutting tool in turning based in a toolholder with cooling fluid flowing inside its body being that this fluid must necessarily be able to phase change due to heat generated from machining processes. In this way, the fluid evaporates just under the cutting tool allowing a heat transfer more efficient than if were used a fluid without phase change once the latent heat of evaporation is beneficial for removal heat. Following, the cooling fluid evaporated passes through a condenser located out of the toolholder where it is condensated and returns to the toolholder again and a new cycle is started. In this study, the R-123, a hydrochlorofluorocarbon (HCFC) fluid, was selected for the turning of a Cr-Ni-Nb-Mn-N austenitic steel of hard machinability. The machining tests were carried out under three different machining conditions: dry machining, external cutting fluid (conventional method), and with the toolholder proposed. As result, the developed system allows a surface roughness up to 10% better than dry machining and a tool life close to the conventional method, but 32% superior to dry machining; moreover, there are environmental and economics advantages once the cooling fluid is maintained in a loop circuit.

Detection of antibody to Toxocara vitulorum perieneteric fluid antigens (Pe) in the colostrum and serum of buffalo calves and cows by Western blotting

Toxocara vitulorum, a nematode parasite in the small intestine of cattle and water buffaloes, causes high morbidity and mortality of 1-3 months old buffalo calves. This research evaluated the specific perieneteric antigens (Pe) reactivity of anti-T. vitulorum-Pe antibody (Tv-Pe-Ab) in both immune sera and colostrum from buffalo cows immediately post-partum from buffalo cows. The presence of Tv-Pe-Ab in sera of buffalo newborn calves was also examined at 1 day before and after suckling the colostrum as well as in sera from naturally infected calves at the beginning and peak of the maximum infection and then again during the period of rejection and post-rejection of the parasite. Pe antigens were characterized for Tv-Pe-Ab by SDS-PAGE and Western blot (WB). The SDS-PAGE showed that Pe contained nine protein bands (11, 14, 31, 38, 58, 76, 88,112 and 165 kDa). All Pe bands were recognized by Tv-Pe-Ab in sera and colostrum of buffalo cows. Only the serum antibodies of buffalo calves at 1 day of age after suckling the colostrum and during the beginning of T. vitulorum infection recognized Pe antigen's nine bands. In contrast, serum antibodies from 1-day-old buffalo calves, taken before suckling colostrum, did not react with any protein band. In suckling calves, which reached peak egg output, rejection and post-rejection stages of the infection, serum Tv-Pe-Ab reactivity with lower molecular weight protein bands (11-76 kDa) was lost and only reactivity with the Pe protein bands of higher molecular weight (88, 112 and 165 kDa) remained. (c) 2005 Elsevier B.V. All rights reserved.

New geopolymeric binder based on fluid catalytic cracking catalyst residue (FCC)

This paper provides information about the synthesis and mechanical properties of geopolymers based on fluid catalytic cracking catalyst residue (FCC). FCC was alkali activated with solutions containing different SiO2/Na2O ratios. The microstructure and mechanical properties were analysed by using several instrumental techniques. FCC geopolymers are mechanically stable, yielding compressive strength about 68 MPa when mortars are cured at 65 degrees C during 3 days. The results confirm the viability of producing geopolymers based on FCC. (C) 2012 Elsevier B.V. All rights reserved.

Numerical analysis of refrigerant flow along non-adiabatic capillary tubes using a two-fluid model

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos da efedrina sobre as funções cardiovascular e renal de cães sob anestesia com pentobarbital sódico

JUSTIFICATIVA E OBJETIVOS: Com a perspectiva criada por algumas pesquisas de ações diferenciadas da efedrina sobre a função renal, dependendo da dose utilizada, e considerando-se as controvérsias ainda existentes a respeito dos seus efeitos sobre a função renal, esta pesquisa experimental tem como objetivo verificar se doses diferentes de efedrina determinam efeitos hemodinâmicos e renais diferenciados. MÉTODO: em 32 cães anestesiados com pentobarbital sódico (PS), submetidos a preparação cirúrgica, cateterismo, monitorização, expansão do volume do fluido extracelular e respiração controlada, foi estudada a hemodinâmica cardiovascular e renal e a função renal. Os cães foram distribuídos aleatoriamente em quatro grupos: G controle (n = 8), com os cães permanecendo apenas sob o efeito do PS, G ef. 2 µg (n = 8), G ef. 10 µg (n = 8) e G ef. 100 µg (n = 8), com os cães recebendo efedrina nas doses respectivas de 2, 10 e 100 µg.kg-1.min-1. Os atributos cardiovasculares e renais foram estudados em 5 momentos: controle (M1 e M2), durante a infusão de efedrina (M3 e M4) e após a suspensão da infusão de efedrina (M5). RESULTADOS: Não houve diferença significante entre os grupos em relação aos atributos estudados. em G ef. 2 µg houve aumento significante de freqüência cardíaca, fluxo sangüíneo aórtico, débito urinário e excreção fracionária de sódio. em G ef. 10 µg houve aumento apenas da freqüência cardíaca e fração de filtração, enquanto em G ef. 100 µg ocorreu aumento de freqüência cardíaca, pressão arterial média, pressão venosa central, fluxo sangüíneo aórtico e hematócrito; por outro lado, ocorreu diminuição dos fluxos plasmático e sangüíneo renais e aumento da resistência vascular renal. CONCLUSÕES: A efedrina, dependendo da dose utilizada, apresenta ações hemodinâmicas e renais diferenciadas.

Effect of high-dose fentanyl on renal function in dogs

OBJETIVOS: Estudamos os efeitos de alta dose de fentanil (F) em atributos de função renal (FR) do cão. DESENHO: Anestesiamos com pentobarbital sódico (PS) 16 cães divididos aleatoriamente em 2 grupos: manutenção com PS (Gi) e PS com F (0,05 mg.kg-1) (G2). INTERVENÇÃO: os cães foram ventilados artificialmente e tiveram cateterizadas as veias femorais esquerda e direita e a artéria femoral esquerda para infusão de drogas e coleta de dados hemodinâmicos e de sangue para dosagens laboratoriais. Coletou-se urina durante todo experimento. MENSURAÇÃO: Determinaram-se os valores de atributos de FR.. RESULTADOS: PS não mudou a FR e o comportamento de G1 deveu-se à expansão do volume extracelular. O F diminuiu significativamente freqüência cardíaca, pressão arterial média, clearance de creatinina, volume urinário, clearance osmolar e excreção fracionária de sódio e potássio. CONCLUSÕES: A diminuição da FR foi provavelmente devida às alterações hemodinâmicas induzidas pelo F, não se descartando possível ação da aldosterona.

Morphological and functional evaluation of distal esophagus of rabbits submitted to esophageal infusion with caustic soda

A ingestão de substâncias cáusticas constitui importante situação de emergência, tendo em vista a gravidade de suas seqüelas. OBJETIVO: Estudar as alterações morfológicas e funcionais do esôfago de coelhos submetidos à infusão esofágica com soda cáustica (NaOH). MÉTODOS: 88 coelhos foram divididos em 4 grupos: G1 (n=22) foi submetido à infusão esofágica com água destilada; G2, G3 e G4 foram submetidos a infusão esofágica com NaOH a 2%, 4% e 6%, respectivamente. Alterações morfológicas foram estudadas em 12 animais de cada grupo e as alterações manométricas, nos 10 animais restantes. Foram feitas análises do esfíncter inferior do esôfago (EIE), número e amplitude das contrações no terço distal do esôfago. Estes estudos foram realizados antes (momento 1 - M1) e aos 30 minutos, 6 horas e 24 horas após a infusão esofágica (momentos M2, M3 e M4, respectivamente). RESULTADOS: Avaliação macroscópica: G1 - sem alterações; G2 - edema, hiperemia e descamação; G3 - aumento do calibre do esôfago, úlceras, descamação da mucosa; G4 - lesões semelhantes as do G3, porém mais intensas, áreas de extensa hemorragia. Avaliação funcional: a pressão no EIE foi mais elevada em M2 no grupo 2; o número das contrações no terço distal do esôfago foi menor em G3 e G4, e a amplitude das contrações foi menor em G4. CONCLUSÕES: 1) a infusão esofágica com NaOH constitui excelente modelo experimental de esofagite cáustica no coelho; 2) a infusão esofágica com NaOH causa lesões na parede do esôfago, com gravidade proporcional a concentração da solução; 3) a infusão causou espasmo do EIE em M2 e redução do número e amplitude das contrações no terço distal do esôfago.

Graft versus host disease in a rat small bowel transplant model after T-cell depleted donor specific bone marrow infusion

Baixas doses de irradiação associadas à infusão de células da medula óssea não previnem a ocorrência da reação do enxerto versus hospedeiro após o transplante intestinal. OBJETIVO: Neste estudo foi avaliado a potencial vantagem em estender o regime imunossupressor associado a infusão de células de medula óssea do doador depletadas de células T na prevenção da reação do enxerto versus hospedeiro após o transplante intestinal. MÉTODOS: Transplante heterotópico de intestino delgado foi realizado em ratos Lewis como receptores e da como doadores, distribuídos em cinco grupos de acordo com a duração da imunossupressão, irradiação e do uso de medula óssea normal ou depletada: G1 (n=6), sem irradiação e G2 (n=9), G3 (n=4), G4 (n=5) e G5 (n=6) foram irradiados com 250 rd. Grupos1, 2, 4 e G3 e 5 foram infundidos com 100 x 10(6) células da medula normal e depletada respectivamente. Animais no G1,2,3 foram imunossuprimidos com 1mg/kg/FK506/ IM por cinco dias e G4 e cinco por 15 dias. Anticorpos monoclonais contra células CD3 e colunas magnéticas foram utilizadas para a depleção da medula óssea. Os animais foram examinados para a presença de rejeição, reação do enxerto versus hospedeiro, chimerismo e biópsias intestinais e da pele. RESULTADOS: Rejeição mínima foi observada em todos os grupos; entretanto, a reação do enxerto versus hospedeiro somente nos animais irradiados. Extensão da imunossupressão alterou a gravidade da reação nos animais dos G4 e 5. Rejeição foi a causa mortis no G1 e a reação do enxerto versus hospedeiro nos Grupos 2,3,4 e 5, não controlada com a infusão de medula óssea depletada. O chimerismo total e de células T do doador foi estatisticamente maior nos grupos irradiados em comparação ao G1. CONCLUSÃO: A extensão do regime de imunossupressão associado a baixas doses de irradiação diminui a gravidade da reação do enxerto versus hospedeiro, não abolida pelo uso de medula óssea depletada.