983 resultados para industry concentration


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Metal-alumina joints have found various practical applications in electronic devices and high technology industry. However, making of sound metal ceramic brazed couple is still a challenge in terms of its direct application in the industry. In this work we successfully braze copper with Al2O3 ceramic using Zr52.5Cu17.9Ni14.6Al10Ti5 bulk metallic glass forming alloy as filler alloy. The shear strength of the joints can reach 140 MPa, and the microstructrural analysis confirms a reliable chemical boning of the interface. The results show that the bulk metallic glass forming alloys with high concentration of active elements are prospective for using as filler alloy in metal-ceramic bonding.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The lift force on a spherical nanoparticle near a wall in micro/nanofluidics has not received sufficient attention so far. In this letter the concentration of 200 nm particles is measured at 0.25–2.0 m to a wall in a microchannel with pressure-driven de-ionized water flow pressure gradient 0–2000 kPa/m . The measured data show the influence of the lift force on the nanoparticle concentration distribution. By introducing the Saffman lift force into the Nernst–Planck equation near a wall, we find that the lift force is dominant at the range of 2

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Nigeria's three federal fisheries schools are administered by three autonomous research institutes located in Lagos, New Bussa, and Maiduguri. The schools were established at different periods to train the required manpower for Nigeria's fishing industry which has remained predominantly artisanal since its inception in 1942 as a Second World War exigency. Despite the establishment of the schools, the industry's manpower is still being dominated by non-nationals especially in the capture fisheries sub-sector. The common features of the schools include the apparent insensitivity of their programmes to the industry's dynamic manpower needs; the absence of coordination of their programmes by a national body which would have ensured that the schools are able to communicate with one another and are willing to act and share a purpose. The need and the methodology for a change of emphasis from the on-going training of extension agents and officers to that of fishing operatives and technicians to enable Nigeria effectively harness her local fish resources towards self-sufficiency is highlighted.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Trace metals constitute a major form of water pollutant that can adversely affect fish production. The potentially toxic metals have been identified as lead, zinc, copper, arsenic, antimony, mercury beryllium, barium, cadmium, chromium, nickel, selenium among others. Preliminary laboratory studies have been directed to the determination of traces of lead in the aquatic biota and its toxicity. There are indications that the levels reported in effluents from some of the industries may be above the tolerant limits of local fish species and organisms that make up their food. Metal pollution could become a serious problem to freshwater fisheries in the future as a result of increasing urbanization and industrialization, unless efforts are made to prevent it

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Consequent upon the present national call in Nigeria for all to go back to agriculture including fishing, most retrenched workers and unemployed youths from the riverine areas are taking up fishing as a legitimate and gainful livelihood. To sustain this tempo and attract more investment, the economic viability of such projects must be known. This study is an attempt to document the profitability and investment potential of artisanal canoe fishing. Socio-economic information including catches, operational cost and returns were obtained through a personal interview questionnaire survey of 240 randomly selected artisanal canoe fishermen from Bonny, Brass and Degema Local Government Areas (LGA) of the State and analyzed. With an investment cost of about 8,135, 8,490 and 6,571 and operation cost of 750, 776 and 627, the analysis showed an average monthly gross income of 1,869, 3,221 and 1,775 for the three local government areas respectively. A benefit-cost-ratio of 1:8, net present value of 400, 603 and internal rate of return greater than 50% were obtained. Since capital invested in fisheries is not tied up for long before benefits start flowing, coupled with the high IRR, it is concluded that artisanal canoe fishing would be an economically viable venture if well managed

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Over the years, Nigeria have witnessed different government with different policy measures. Against the negative consequences of the past policies, the structural adjustment was initiated in 1986. Its aims is to effectively altar and restructure the consumption patterns of the economy as well as to eliminate price distortions and heavy dependence on the oil and the imports of consumer goods and services. Within the period of implementation, there has been a decreasing trend in yearly fish catch landings and sizes but the reverse in shrimping. There is also a gradual shift from fishing to shrimping, from the vessels purchased with 83.3% increase of shrimpers from 1985 to 1989. Decreasing fish catch sizes and quantity aggravated by the present high cost of fishing coupled with the favourable export market for Nigeria shrimp tend to influence the sift. This economic situation is the result of the supply measures of SAP through the devaluation of the Naira. There is also overconcentration of vessels on the inshore waters as majority of the vessels are old and low powers hence incapable of fishing on the deep sea. Rotterdam price being paid for automotive gas oil (AGO) by fishing industries is observed to be discriminating and unhealthy to the growth of the industry as it is exceedingly high and unstable thus affecting planning for fishing operation. Fuel alone takes 43% of the total cost of operation. The overall consequences is that fishing days are loss and therefore higher overhead cost. It was concluded that for a healthy growth and sustainable resources of our marine fishery under the structural adjustment programme licensing of new fishing vessels should be stopped immediately and the demand side of SAP should be employed by subsidizing high powered fishing vessels which can operate effectively on the deep sea

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Aspects of the Nigerian fishing industry are outlined to explain the concept of fishing systems viability which is often influenced by a combination of factors including biological productivity, as well as technical, economic and social factors. The productivity of the aquatic environments can be increased by the construction and installation of artificial reefs and fish aggregating devices. These man-made structures provide shelters, food and breeding grounds for fin fish and shell fish. The habitat enhancement techniques are appropriate, efficient, cheap and simple strategic options for increase in fish production. Recommendations for effective utilization and long term management are outlined.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Macroeconomic growth and the development of sustainable business activities are interrelated. In Lagos State, aquaculture is a marginal economic activity thriving mainly on a semi-intensive level. Notwithstanding the available potentials for the development of successful commercial aquaculture enterprises in the state, the transformation to a full-flagged industry continues to be undetermined by certain critical factors. Feasible development strategies may be sought in increasing all stakeholders' capacity in the formulation of policies, plans and regulations, a complete separation of aquaculture from the capture fisheries in administrative structure and policy; the adoption of precautionary approach; provision of economic incentives to enhance private investments and increase output,respectively